Used O K for sale (68,970)

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: AB / 231059, functionality: fully functional, input voltage: 400 V, input current: 23 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,770 mm, total length: 4,400 mm, total width: 1,100 mm, overall weight: 1,000 kg, Equipment: documentation/manual, This machine comes fully equipped to provide flawless edges:  1. Pre-Milling Unit (RT-V): 2 counter-rotating diamond heads to eliminate panel chipping and telegraphing.  2. Gluing Station: High-efficiency EVA glue basin with rapid heating and automatic temperature control. Feds Ah Simjpfx Agxjgi 3. Pressure Zone: Driven main roller plus 2 idle pressure rollers for an optimal glue line. 4. End Trimming Unit (K-2): Dual-motor automatic switching for straight or beveled cuts.  5. Fine/Flush Trimming Unit: High-frequency motors with numerical control adjustment for flush, radius, or chamfered trimming. 6. Corner Rounding Unit (Round 1): Complete finishing of panel corners on straight or shaped panels.  7. Edge Scraping Unit: Eliminates radius chatter lines for a smooth finish. 8. Glue Scraping Unit: Cleans away any residual squeeze-out along the joint line. 9. Polishing/Buffing Unit: Dual cloth motors to restore color and sheen to extruded PVC/ABS edges. 10. Anti-Adhesive Spray System: Dual-liquid spraying device to keep panels perfectly clean. Controls • Interface: SCM Orion electronic control panel with digital display for effortless program setup, unit exclusion, and troubleshooting. • Guide System: Numerically controlled automatic infeed guide. • Safety: CE certified with full enclosure safety hood and safety microswitches. • Material Support: Extendable roller support rail for processing oversized panels.

Condition: ready for operation (used), * Brand: O&K Germany Fgsdpfs Ahq Imjx Agxei * Type: P 100/125 impact crusher * Opening : 1350 x 900 mm * Incl.: 132 kW E-motor

Year of construction: 2006, condition: excellent (used), functionality: fully functional, HOSOKAWA ALPINE 100 AS AEROPLEX SPIRAL JET MILL WITH K-TRON GRAVIMETRIC FEEDING SYSTEM For sale: complete Hosokawa Alpine Aeroplex 100 AS spiral jet mill system with K-Tron gravimetric dosing/feeding unit. The system originates from pharmaceutical use and was originally supplied to Mepha AG, Switzerland. Fjdpfx Aozxt Snogxogi The machine is in very good, clean condition and is supplied with extensive original documentation for both the Hosokawa Alpine jet mill and the K-Tron feeding system. HOSOKAWA ALPINE 100 AS Manufacturer: Hosokawa Alpine AG, Germany Type: Aeroplex 100 AS Machine No.: P2 150 959/1 Year of manufacture: 2006 Grinding chamber diameter: 100 mm Weight of jet mill: approx. 12 kg CONFIGURATION OF THE JET MILL Nozzle ring: - Nozzle angle: 50° - Number of nozzles: 4 - Nozzle diameter: 1.5 mm Injector: - Injector drive nozzle: Ø 1.5 mm - Catch nozzle: Ø 3.5 mm Compressed-air connections: - Grinding air: 10 bar(g) - Injector air: 10 bar(g) - Permissible operating pressure: +/- 50 mbar Connections: - Product feed: 2" - Grinding air: 1/2" - Injector air: 1/2" - Fine product outlet: 1 1/2" According to the original order-specific documentation, the machine is equipped with white, FDA-approved silicone seals. K-TRON GRAVIMETRIC FEEDING/DOSING SYSTEM The Alpine mill is combined with a K-Tron dosing system for controlled and reproducible product feeding. The system includes: - K-Tron gravimetric feeder - K-Tron KCM control unit - K-Tron Digi-Drive - Stainless steel product hopper - Weighing/measuring system - Dosing drive - Several interchangeable dosing screws for different feeding ranges - Stainless steel product feed components The K-Tron weighing system is identified as: Type: SFS 24/20 (+20KG VL) w.D. Capacity: 240 N Article No.: Serial No.: 10711664 Country of origin: Switzerland APPLICATION The Hosokawa Alpine Aeroplex 100 AS is a spiral jet mill designed for fine grinding and micronization. The grinding process takes place using compressed air, without rotating grinding tools inside the grinding chamber. Typical applications include: - Pharmaceutical powders and active ingredients - Fine chemicals - Laboratory and pilot-scale production - Micronization - Fine grinding of dry powders - Development and small production batches DOCUMENTATION Extensive original documentation is included. Available documentation includes, among others: - Original Hosokawa Alpine 100 AS operating manual - Order-specific machine data - Technical drawings - Operating and maintenance instructions - Cleaning instructions - Spare parts information - K-Tron feeder operating documentation - K-Tron technical drawings and configuration data CONDITION Very good and clean used condition from pharmaceutical use. The system was dismantled for cleaning and has been carefully reassembled. The photographs show the actual machine and its current configuration. Inspection and demonstration by appointment in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged. Subject to prior sale and errors.

Condition: used, Year of construction: 1989, O&K diesel forklift, 4-wheel, lifting capacity 6 tons, year of manufacture 1989 Fgsdpfxsxxc Uxe Agxji

Condition: used, Due to the high number of fraudulent inquiries, emails will not be answered. WhatsApp x O+K V25 for restoration and repair Years of manufacture: 1980, 1982, 1984 Not drivable / not operational Loading possible Fgjdpow U H Ezefx Agxji "SUBJECT TO ERRORS, TYPOS, AND PRIOR SALE"

Condition: used, Year of construction: 1998, edge thickness (max.): 3 mm, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Feed speed: max. 25 m/min Edge thickness: max. 3 mm Panel height: min. 14 mm Panel height: max. 55 mm Panel length: min. 350 mm Number of panel edge trimming and routing units: 3 Panel edge trimming and routing unit 1 Motor power: 7.5 kW Speed: 18,000 rpm Panel edge trimming and routing unit 2 Motor power: 7.5 kW Speed: 18,000 rpm Panel edge trimming and routing unit 3 Motor power: 7.5 kW Speed: 18,000 rpm Number of edge processing units: 3 Cutting unit Number of motors: 2 Motor power: 0.22 kW Speed: 17,250 rpm Fine routing unit for flush trimming and rounding Motor power: 1.5 kW Speed: 8,600 rpm Polishing unit Number of motors: 2 Motor power: 0.18 kW Speed: 1,375 rpm EQUIPMENT Processing of thin edges Processing of thick edges EVA hot melt adhesive system Pressure system with rubber belt Panel alignment system at the infeed 3 routing/hogging units with CNC-controlled positioning Cutting unit Fine routing unit for flush trimming and rounding with CNC-controlled positioning Polishing unit Edge roller magazine with 2 positions Fedpfx As Aihx Rjgxegi Glue tank for EVA hot melt adhesive Pressure roller set with 4 pressure rollers CNC-controlled positioning of the pressure rollers Spray unit CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 3944

Condition: used, Year of construction: 2017, operating hours: 3,706 h, overall weight: 20,000 kg, Doppstadt DW 2060K Biopower - Year of manufacture: 2017 - Engine: Mercedes-Benz OM 926 LA / 326 hp - AD BLUE system - Weight: 20,000 kg - Remote control - Humidification system - Rear conveyor belt, 5 m - Overband magnet - Tracked chassis Fgedoz Idb Nepfx Agxji - Roller: 2000 mm x 600 mm - Teeth: 24

Condition: used, mileage: 360,000 km, power: 32 kW (43.51 HP), first registration: 06/1960, fuel type: diesel, color: beige, gearing type: mechanical, number of seats: 9, Year of construction: 1960, Equipment: air conditioning, Mercedes-Benz predecessor, Sprinter O 319 Samba, with folding roof and air conditioning 2 available: 1 beige/green / 1 beige/red - Driver's seat plus tour guide's seat - First row of seats / original double seat - Club seating area for 5 people - Glazed roof edge - Folding sliding roof - Rear trunk - Air conditioning - Refrigerator Length 4820 mm Width 2080 mm Height 2370 mm Permissible total weight 3500 kg or 3600 kg. Registration as a passenger car with a permissible total weight of 3500 kg is possible. - Rental possible for your event. - Delivery throughout Europe is possible with our car transporters. Vehicles have been completely rebuilt from the ground up. - 1 manufactured in 1962 and 1 in 1960 Fjdpfx Agez Skumexegi Net export possible. Price per unit: 159,990.00 euros incl. 19% VAT = 134,445.00 euros net. We offer worldwide shipping.

Year of construction: 2010, condition: good (used), Ref. -No.: 10322 Manufacturer: EKO PILL Type: PMPO 950 K Year of construction: 2010 Further information: The PMO 950K carousel jet washer is revolutionary maintenance-free washer, extremely compact and aesthetic structure, designed for oil contamination, machining emulsions and loose chips from washed objects. Despite its minimized dimensions, it works perfectly together Fedpfx As Ahmuljgxsgi with automated production lines for thorough washing, and optional rinsing and drying of moving parts on the internal conveyor. Short distance between station Loading and unloading facilities make it flexible. Washing, rinsing as well as drying operations take place in closed circuits, which significantly reduces costs - Gravity oil separator OGP - Fine filter EKO-PIL 20 µm - Vapor condenser with liquid regeneration - Drying heat recovery - Washing - Rinsing / Maintenance - Drying

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 10,567 h, We are selling a mobile excavator O&K MH PLUS, manufactured in 1995, with various accessories. The operating hour meter reads 10,567. The tires were replaced approximately 4 years ago and show very little wear. Various hydraulic hoses have been replaced. See photos. The excavator is used very rarely and is always stored in a covered hall. Deep digging bucket: approx. 30 cm Deep digging bucket: approx. 80 cm Ditching bucket: approx. 200 cm The excavator must be picked up on site. Fgodpsz Hb Nnjfx Agxji

Condition: used, Year of construction: 2004, Used Machine Year of Manufacture: 2004 Features and Technical Specifications: Base Machine: - Single-arm traveling column - Welded machine frame with ground prismatic guides - Rack-and-pinion drive in the X direction, ball screws in the Y and Z directions for precise positioning Machining dimensions: - Max. workpiece size for milling, minus cutter radius (tool diameter 25 mm): X = 3,015 mm, Y = 1,282 mm - Maximum travel ranges: Fsdo Af I Upspfx Agxsgi X = 3,268 mm, Y = 1,483 mm, Z = 325 mm - Maximum programmable speed X = 78 m/min. Y = 78 m/min. Z = 26 m/min. Workpiece support with 4 brackets, pneumatically clamped; each bracket has 1 stop pin at the rear and 2 vacuum cups per bracket Display and definition in the program: - 2 side stops (right and left) - 2 large push buttons for clamping and releasing workpieces - 2 mounts for unused suction cups - 2 tape measure displays for positioning the brackets in the X-axis, relative to the left and right stops. - Rear stop or, alternatively, stops in the X and Y directions mounted at the front instead of the rear Drilling unit 7964, 18 spindles: - Drive power 2.2 kW - 14 vertical spindles, individually controllable, arranged in a T-shape, 10 in the X-direction and 4 in the Y-direction - 32 mm pitch - Max. drill bit diameter: 35 mm - Total drill bit length: 70 mm from the mounting end (depending on panel thickness) - Spindle extension stroke: 70 mm - Rotation direction: Alternating clockwise/counterclockwise, n(max.) 1,000 – 4,390 rpm, continuously adjustable - Mounting: M 10 thread – interference fit, diameter 11 mm - 4 horizontal spindles - 1 dual drilling spindle in the X direction - 1 dual drilling spindle in the Y direction - Mounting: M 10 thread – interference fit, diameter 11 mm - Total drilling length: max. 70 mm from the mounting end - Space available for: Optional dual drilling spindle in the X-direction or vertical adapter with double feed force Saw unit 7945: - Power: 1.5 kW - n(max.) = 1,000 – 4,850 rpm, continuously variable - 90° pneumatically swiveling for sawing/grooving in the X and Y directions - Tool holder: A diameter = 150 mm, I diameter = 30 mm, B = max. 8.0 mm Milling unit 7930: - Power: 6.0 kW (S6) - n(max.) 1,000 – 18,000 rpm, continuously adjustable - Liquid cooling - With HSK 63 F tool holder, with right-hand threaded nut (for right-hand tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - With pneumatically height-adjustable exhaust hood - Tool weight: max. 6 kg (including holder) - Tools: Milling and grinding tools, max. diameter 160 mm - 2 machining areas, each with 3 pneumatically controlled stop pins (standard at the rear, optional at the front) - Vacuum pump 40 m³/h, water-cooled with milling spindle cooling - Safety enclosure in accordance with CE standards - Selective safety foot mats (3-section layout) in the work area - Manual lubrication for all linear guides in the X, Y, and Z directions, for all milling spindle guides, for all console guides, and for all unit guides Control system: - PC control system with 17-inch monitor - Windows 2000 operating system - RJ45 network connection, 10/100 Base-T Fast Ethernet; processor clock speed: 2.4 GHz - US keyboard and Microsoft InteliEye mouse (optical) - Integrated 56K remote maintenance modem for data transfer - 3½-inch floppy disk drive, CD-ROM drive (CD burner) - TwinC...

Condition: used, Year of construction: 1990, Equipment: all wheel drive, * O&K crawler excavator Fgedpfx Agjwpptloxei * Year of manufacture 1990 * Window defect * Needs repair * Work lights * Bucket ----Internal vehicle number: 10119-----Subject to errors and prior sale

Condition: used, Year of construction: 2002, operating hours: 11,000 h, Equipment: all wheel drive, * O & K MH Plus wheeled excavator with approx. 11,000 operating hours - first commissioned in 2002 * With articulated system - quick coupler - hammer line and 5 buckets in total * Transport length : 7,900 mm - Total width : 2,500 mm - Total height : 3,100 mm * Total weight : 14.300 kg - Tires 10 R 20 - Vehicle available immediately - * Regularly serviced - German vehicle - From 1st hand - * Engine manufacturer : Deutz Type : F4L913 with 78 KW / 106 PS * PICK-UP PRICE - TAKE IT AS IS - WITHOUT TÜV - WITHOUT LICENSE PLATE - * For viewing please make an appointment * Contact person : Mr. Andreas Vogel * The information provided on the Internet is a non-binding description. Fgjdpexgldlefx Agxei * They do not represent warranted characteristics. * The seller is not liable for typing or data transmission errors. * Subject to alterations, errors and prior sale.

Condition: used, Year of construction: 1995, max. weight 60 kg; min. weight 0,4 kg. Fodpo Ahlu Hofx Agxegi

Condition: excellent (used), Manufacturer: O&K Valid TÜV inspection until 15.08.2026. Fodpfxezaa Uts Agxegi

Condition: used, Year of construction: 2011, operating hours: 40,885 h, overall weight: 6,500 kg, displacement volume: 49 cm³, clamping force: 110 kN, injection pressure: 2,236 bar, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request Fgedjw N Egaepfx Agxoi terms of payment: 100% prior to delivery

Condition: used, mileage: 677,250 km, power: 210 kW (285.52 HP), first registration: 11/2012, fuel type: diesel, number of seats: 25, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Year of construction: 2012, Equipment: ABS, air conditioning, * Our internal reference: 1186 * O 530 K Citaro - Facelift * First registered: 11/2012 -> Model year 2013 * 1st owner in Germany * Inspection book available! * We are still awaiting service records * 210 kW - EURO 5 / EEV Fjdpfx Agjy Evg Djxsgi * ZF automatic transmission * Retarder * Lifting/lowering/kneeling function * ABS, ASR * 60 standing places * Plus additional folding seat at the pram space * 1 x wheelchair space * LED destination display with control unit * Interior pre-wiring for TFT monitor * Radio * TILT WINDOWS * AIR CONDITIONING * Auxiliary heater * Manual folding ramp * Note: * The buyer is responsible for independently inspecting the condition and equipment of the vehicle/goods! * All information given without liability * Subject to prior sale * Please refer to our terms and conditions

Condition: used, functionality: fully functional, color: red, overall weight: 83,000 kg, Year of construction: 1996, operating hours: 14,000 h, machine/vehicle number: 72632, Exchange engine with 10,000 operating hours. Undercarriage and bucket in good condition. Location: Göttingen. Fodpezibkajfx Agxjgi

Condition: good (used), Year of construction: 1997, functionality: fully functional, 4-AXIS CNC MACHINE FROM A PART-TIME JOINERY, VERY GOOD CONDITION Workpiece dimensions max.: Length 3,000 mm Width 1,050 mm Fjdsz H Na Ispfx Agxogi Thickness 60 mm with standard clamps 120 mm with clamping templates (customer-supplied) 2 clamping stations for machining 2 identical workpieces, resulting in halved changeover times 6 clamping consoles with tubeless vacuum guidance 12 vacuum suction cups Machine zero point at the front left Chip conveyor belt Main spindle 7.5 kW, HSK 63 F S1 incl. stepless speed control 1,500 - 18,000 RPM C-axis for main spindle Tool changer magazine, 12-position, mounted on the support and moving with the X-axis Drilling head, 17 spindles, vertical, 7,500 RPM Spindle spacing 32 mm Drilling head, horizontal, 4 spindles Control system: ----- HOMATIC NC 83 Operating system OS-9 with WINDOWS interface WOODWOP 4.5 Connection values: 380 V / 50 Hz Control voltage: 220 V 50 Hz Additional accessories: ----- Anti-slip mats in front of the machine Adapter unit for saw with 2 outlets Maintenance performed: - Main spindle completely overhauled in 2019, since then max. 100 hours of use - X-axis bearings completely new - Water hoses partially replaced - New vacuum pump Becker - Cooling unit for main spindle new

Condition: used, Year of construction: 1988, operating hours: 2,360 h, Equipment: soot filter, Ref. No.: B - 02 * O&K * RH 6 * Crawler chassis * with vibratory hammer * approx. 2360 operating hours * fully functional Trade-in possible Financing from 4.99% Fjdpexvf S Isfx Agxegi Subject to errors and prior sale! The information in this listing is non-binding descriptions and does not represent guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Listed equipment should be checked separately. All information in the listings is non-binding! Delivery available throughout Germany upon request Opening hours: Monday to Thursday from 9:00 am to 5:00 pm, Friday from 9:00 am to 2:00 pm, and by appointment!

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, including support baskets Filter area: 77.6 m² Filter area load: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with feed hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring to raise the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/design: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascade connection of up to 2 fans up to 37 kW with frequency converter interface - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touchscreen - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluation; rotation monitoring of the rotary valve - 24 V DC exhaust/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 running meters of cable Fedpfezlbqrox Agxjgi - Ducting system including elbows, branches, reducers, PU hoses, machine connections, small parts, and EP dampers for exhausting 11 woodworking machines 1 HRS per specification - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for ...

Condition: used, mileage: 329,874 km, power: 210 kW (285.52 HP), first registration: 11/2007, fuel type: diesel, number of seats: 29, gearing type: automatic, emission class: euro4, brakes: retarder, Equipment: ABS, * Our internal number: 1117 * O 530 K (10.5 m) * Citaro * First registered 11/2007 * 210 KW / 286 HP * Only: 329,874 km * Retarder * Vehicle from France * Ramp under door 2 (functional?) * Matrix * Vehicle has paint damage * Engine and transmission running, interior - TOP! * Chassis clean! * The customer is obliged to check the condition and equipment of the goods/vehicle for themselves! * etc. * Vehicle may be in use / mileage and condition may vary Fodpfjwll D Ejx Agxegi * All information is subject to change without notice * We reserve the right to sell the vehicle prior to purchase * Please refer to our Terms and Conditions

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Equipment: documentation/manual, Top machine from cleanroom manufacturing (pharmaceutical industry) The machine can be inspected while powered on, by arrangement. Technical data Manufacturer: Engel Type: V 330H/80V/130 Combi 2-color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33107 h Control: CC 200 Extras - with rotary table, 820 mm diameter - with GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - only 33,107 operating hours - protective enclosure/safety cage - horizontal conveyor belt - hardly any paint damage / almost new condition - fully functional Dimensions L/W/H: see drawing Weight: 10600 kg Functionality: fully operational Condition: excellent Clamping unit Clamping unit: hydraulic Clamping force: 1300 kN / 130 tons Tie bar distance: tie-bar-less Opening stroke: 606 mm Tool installation height: 250 mm Centering: 125 mm Platen distance max: 850 mm Platen size: 750 mm / 850 mm (W x H) Injection unit 2K Screw diameter: 25 / 22 mm Injection weight: 72/ 35 gr. Injection pressure: 2391/ 2066 bar Injection volume: 79 / 38 ccm Ejection stroke / force: 61 kN / 100 mm GEKU robot details SR 500 ST Control: Simotion X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-swivel axis: SWM 45 C-axis: servo Gripper: SWS16 B-axis: not available The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Warranty Warranty until the first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to your location against reimbursement of shipping costs / worldwide delivery possible from our warehouse in Hanover / Germany Financing - upon request - lease-purchase option Price: upon request Fedpfxeub Umqs Agxegi

Condition: used, mileage: 771,110 km, power: 210 kW (285.52 HP), first registration: 08/2008, fuel type: diesel, gearing type: automatic, emission class: euro5, color: blue, brakes: retarder, total length: 10,500 mm, total width: 2,550 mm, total height: 3,400 mm, Equipment: ABS, air conditioning, power assisted steering, traction control, = Additional options and accessories = - Autoradio Fgedpfxoy Hu Rws Agxji - CD - Climate control - Double glazing - EBS - Electrically operated mirrors - Heater - Hydraulic power steering - Sun visor - Tachograph = More information = Engine capacity: 6.374 cc Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 50%

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot Fedpfxottakhj Agxsgi - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock