Used Oku for sale (307)

Condition: ready for operation (used), Okuma 1006 inverter BLII-D50A Vers.1.2 consisting of board E4809-820-006-A + board E4809-770-069-A, used, normal signs of use, 100% functional, scope of delivery as per photos Gjdpet Izafjfx Acwjir

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-019D, serial number as per photo, used, normal signs of wear, 100% functional Gedpji Eca Iofx Acwoir

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-071, serial number as per photo, used, normal signs of wear, 100% functional Giodpfx Aji Eca Sjcwer

Year of construction: 2001, condition: ready for operation (used), A CNC lathe Okuma Soarer L270E is offered. Turning length: 500mm, turning diameter over bed: 530mm, max. spindle speed: 4200rpm, machine dimensions X/Y/Z: approx. 2800mm/1850mm/2000mm, weight: approx. 3700kg, control: OSP-U10L. Functional, spindle may need to be replaced. An on-site inspection is possible by appointment. Gsdpfx Asxph Sqjcwoir

Year of construction: 1988, condition: ready for operation (used), Turning diameter over bed/slide: 520mm/340mm, turning length: 850mm, speed: 3500rpm, spindle bore: 70mm, chuck diameter: 315mm, bar capacity: 70mm. Machine weight: approx. 7500kg, control: OSP 500L. Documentation available. On-site inspection is possible. Gisdpswz N Tcsfx Acwor

Condition: ready for operation (used), Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible. Godpfewmdv Nox Acwjir

Condition: used, Year of construction: 2024, New demonstration machine! Particularly heavy-duty design with high dead weight for maximum smooth running • Exceptionally quiet and precise operation thanks to torsion-resistant machine housing • Large cast parallel fence with round bar guide, easy to move • Cast flywheels with rubber coating and cleaning brush • Large grey cast iron saw table, tiltable with ground and polished surface • Precise cutting height adjustment via rack and pinion with millimeter scale • Door safety switches • Self-braking motor • Two extraction ports Technical data: Table dimensions (L x W x H): 720 x 520 x 860 mm Cutting speed: 1,650 m/min Weight approx. 240 kg Max. cutting height: 350 mm Max. cutting width: 520 mm Max. saw blade length: 4,260 mm Saw blade thickness min./max.: 0.5 / 0.6 mm Precision guides top/bottom Saw table tilt: 0 - 20° Machine dimensions (L x W x H): 870 x 620 x 1970 mm Giedpfjwggaksx Acwjr Location in stock:

Condition: excellent (used), For sale: Steady rest for lathe. Professional workshop equipment for stable guidance of long and heavy workpieces during machining. Solid cast iron construction – maximum rigidity and durability. Working opening approx. 150 mm (measured with caliper). Opening frame – quick and convenient clamping of the workpiece. Adjustable pins with sliding tips. Attachment to the lathe bed via a base with hole. The steady rest is intended for turning shafts, tubes, bars, and other long elements that require support during machining. Gisdsw Sfpyopfx Acwor

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: 01224, turning length: 750 mm, turning diameter over cross slide: 520 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 65 mm, chuck outer diameter: 250 mm, We are offering this used OKUMA HOWA ACT 4 CNC turning and milling centre, year of manufacture 1985. Manufacturer: OKUMA HOWA Model: ACT 4 Year of manufacture: 1985 Condition: used Category ID: 1128 Type ID: 2239 Machine type: CNC turning and milling centre CNC control: Fanuc 10 TF Godpfsycg Tzox Acwsir Turning diameter: 380 mm Swing over bed: 520 mm Turning length: 750 mm 12-position turret Spindle speeds: 20 - 3500 rpm Chuck incl. hard and soft jaws Tailstock Incl. various tool holders New monitor: flat screen Machine under power. Data sheet, documentation and manuals available Data transfer possible via laptop

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Control system OSP-U100L Travel distances Gjdjrfw Nhopfx Acwoir X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places chip conveyor

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Gijdexmirgopfx Acwor Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Condition: ready for operation (used), Okuma BDU-30A Brushless Servomotor Drive Unit with E4809-045-061-D, serial number as per photo, used, normal signs of wear, 100% functional Gedpfxei D Naao Acwoir

Condition: good (used), Year of construction: 1990, 2. Turret disks with tool holders. Gsdpjxr Diwjfx Acwoir For CNC lathe OKUMA&HOWA 2SP

Condition: good (used), travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, Chip conveyor  SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Gjdpfswxb Erox Acwoir Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws Max. turning Ø:665mm X-Axis: 798mm Z-Axis: 358mm Spindle bore: 360mm Speedrange: 500Rpm Spindle power: 45kW Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Width: 275mm Height: 2100mm Weight: 13000kg

Condition: good (used), Year of construction: 2007, turning length: 1,065 mm, turning diameter: 470 mm, Chip conveyor SMW 315 3 chuck 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours Max. turning Ø: 470mm X-Axis: 260mm Z-Axis: 1065mm Spindle bore: 80mm Speedrange: 4200Rpm Spindle power: 30kW ATC / revolver: 12 BMT Tool system Speed live tools:6000Rpm Giedpfxowq Rpwj Acwor Power live tools:7,1kW Length: 3310mm Width: 1900mm Height: 1970mm Weight: 6100kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,412 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,144 mm, controller model: OSP P300L-R, TECHNICAL DETAILS X-axis travel: 235 mm Z-axis travel: 1,144 mm Turning length: 1,000 mm Turning diameter: 300 mm Swing over bed: 450 mm Turret: 12 positions – all driven Spindle speed: 45 – 4,500 rpm Spindle bore: 68 mm Tool holder: VDI 40 MACHINE DETAILS Gedpfxjxxi Ulj Acwsir Control: OSP P300L-R Weight: 6,600 kg Operating hours: 24,412 h EQUIPMENT Chip conveyor Chuck diameter 250 mm Touch setter Tailstock

Condition: used, _____ Description: Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mm Turning length : 1000 mm Main spindle: Technology:Motor spindle Giedpfxewu I Irs Acwer Speed:4,200 rpm Power:22 kW Torque:427 Nm spindle bore:91 mm Hollow clamping cylinder:86 mm C-axis:High precision package Chuck:SMW KNCS-N 275-86 K8 Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:22 kW Torque:420 Nm spindle bore:80 mm Hollow clamping cylinder:77 mm C-axis:High precision package Chuck:SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Technology:Milling spindle Speed:12.000 rpm Power:22 kW Torque:120 Nm Tool holder:HSK 63 Y-axis:250 mm (+/- 125 mm) B-axis:240° Tool magazin: Number of stations:80 Equipment: Measuring systems:Direct in X/Y/Z axis (glass scales) Chip disposal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Deltatherm E4 Chip rinsing:working area, manual gun Accuracy package:C-axis high accuracy Software package:5-axis auto-tuning Software option:Multifunction tool Gear cutting software package:Gear hobbing, gear peeling Control extension:Dialogue programming Workpiece measurement:Renishaw measuring probe Tool measurement:Tool setter Tool breakage monitoring:Renishaw TRS2 B-axis:NC function and turning function Bar loader:LNS Quickload Servo III+ Automation preparation:Robot interface Work area door:Automatic Set-up mode:Electronic handwheel

Condition: used, turning diameter over bed 460 mm turning dia. over face-slide 256 mm turning length 1250 mm Gisdpfxjxwp Ebj Acwjr centre distance 1250 mm centre height 230 mm spindle bore 55 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady

Condition: excellent (used), Year of construction: 2018, Okuma GENOS L2000-e Year: 2018 Max turning dia ( mm ) Ø200 Max work length ( mm ) 380 Travels X axis (mm) 165 Z axis (mm) 400 C axis 360° ( 0.001° increments) Spindle speed ( min-1 ) 5,000 Spindle nose JIS A2-6 Turret type V12 VDI (Axial) No. of tools 12 (L/M) OD tool shank (mm) 20×20 ID tool shank dia (mm) Ø32 Milling tool Spindle speed (rpm) 6,000 Rapid traverse (X, Z ) m/min X:25 , Z:30 Rapid traverse (C) (rpm) C：200 Tailstock quill diameter (mm) Ø90 Tapered bore type MT.5 (revolving center) Quill travel (mm) 100 Gisdpfx Acoyk Hwijwer Motors, Main spindle (20min/cont) (kW) VAC15/11 Milling tool spindle (kW) PREX 4.0/1.8 (25min／cont) Coolant pump motor (kW) 0.8 Machine size Height (mm) 1,620 Floor space (mm) 2100×1850 Weight (kg) 3,700 Accessories/options: - C-axis - static tool holders - tailstock - foot pedals for chuck and tailstock - center sleeve for tailstock - swarf conveyor - coolant tank - LNS feeder - documentations

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, number of slots in tool magazine: 36, table length: 2,200 mm, table width: 850 mm, controller model: OKUMA-OSP-HMI, coolant supply: 15 bar, distance table center to spindle nose: 950 mm, spindle motor power: 22 W, number of spindles: 36, rapid traverse Z-axis: 16 m/min, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 16 m/min, spindle nose: BT 50, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, table load: 2,500 kg, tool diameter: 120 mm, tool length: 400 mm, tool weight: 20 g, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA-OSP-HMI 3-Axis Vertical Machining Center with CNC Gijdpfx Asu Dinkecwer

Condition: used, Year of construction: 2019, 2019 OKUMA MA600HII 4-Axis Milling Machine with OSP P300M Control, 630 x 630mm Table max loads up to 1,200kg, high-speed Spindle 12,000rpm, Traverse Speed 60m/min, full-size Tool Magazine with 171 Stations, X Axis Travel 1000, Z Axis Travel 1000, Y Axis Travel 900. S/No. 224574 (2019) Gisdjyplrpepfx Acwsr A charge of €4500 for preparation and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Location: These lots are located in Mielec, Poland. Please visit our website for more details. Auction 3459

Condition: new, Power 15 KW Gijdpfxovwfhco Acwjr Technical specification:Hopper opening: 600 x 800 mmHopper capacity: 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 260 mmDrive power: 15 kWRotor speed: 90 ber of knives: 14 pieces 2 piecesType and size of knives: concave / 40 x 40 mm, reversible cutting crownsconcave / 30 x 30 mm, broaching knivesScreen perforation: 15/20 mmPaint finish: frame in RAL 5010, hopper in RAL 7016(HoKuTech standard paint finish)Connected load: 400 V /- 5 % / 50 Hzincluded:Switch cabinet (Rittal) with 5 m cableElectrical control (PLC Siemens)Star-delta startRubber oscillating elementsE-rotor with knife pockets milled into the profileGear limit switch1. Knife rowHold-down device on pusher for long and large partsLarge 40 x 40 mm knives for optimum material feedVery robust gearboxSpecial broaching knives to prevent lateral jammingMachine number: 510-5238

Condition: new, p 450 ax for panel materials including: Programmable sawblade height adjustment Programmable sawblade pivot adjustment Programmable parallel stop adjustment Motors: Main saw: 5.5 kW / 7.5 HP Scoring unit with motor: 0.55 kW / 0.75 HP General features of the p 450: Sliding carriage made of anodized aluminum, including high-precision guide made of hardened and ground steel Sliding carriage lock in any position Sawblade guard with pivoting mechanism Extension arm with adjustable angle stop with length compensation at 10°, 15°, 22.5°, 30°, 45°, and 90° Belt adjustment for speed changes from above (opening in the saw table) Display for the set sawblade speed Electrical system and safety devices in accordance with CE standards Technical specifications Specifications: Sawblade tilt: 0° to 45° Table dimensions: 1,030 x 680 mm Sliding carriage dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at the parallel stop: 1,100 mm Max. cutting height with a 450 mm sawblade: 90°: 155 mm / 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Gsdewl N Twjpfx Acwjir Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, scoring saw: 0.55 kW / 0.75 HP 2 extraction nozzles Extendable angle stop to 3,600 mm

Condition: new, Main motor with 7.0 kW (S6) and automatic star-delta switching Reverse rotation direction with electrical interlock during switching Fixed milling fence with aluminum rulers (version with electrical safety devices) complete with extraction hood (max. tool diameter 240 mm) Giodpsxnqx Defx Acwjr Interchangeable milling spindle Controls on the front side Electrically adjustable spindle height and tilt Electrical pre-wiring for power feed unit (CE version) with table extension: 2,500 x 1,200 mm (length/width of milling table, incl. extension and workpiece support) Operating hours counter Technical data: Power 7 kW Working table dimensions (extendable workpiece support) 2500 x 855 mm (1200 mm x 855 mm) Spindle diameter 30 mm Spindle tilt 0-45° Spindle clamping length 90 mm Tool diameter under table 240 mm Spindle base protrusion from table 38 mm Spindle speeds 3500/6000/8000/10,000 rpm Extraction port diameter 120/120 mm

Condition: new, Technical specification: Funnel opening: 600x800mm Funnel capacity: 0.6m³ Rotor working width: 600mm Rotor diameter: 252mm Gisdpfxjvyp Ave Acwsr Drive power: 15kW Rotor speed: 90 rpm. Number of knives: 14 pieces + 2 pieces Type and size of knives: concave / 40x40 mm, Cutting crowns concave / 30x30mm, clearing knife Screen perforation: 15/20mm Paint: HoKu Tech Standard RAL5010/7016 Connection value: 400V +/- 5% / 50Hz Includes: Control cabinet with 5 m cable Electrical control (PLC Siemens) Star-delta start-up Rubber vibration elements E-rotor with knife pockets milled into the profile Gear limit switch 1st row of knives Holder on the slide for long and large parts Large 40x40mm knives for optimal material feed Very robust gearbox Special clearing knife to prevent jamming at the side