Chopper

Hokutech H 600

Condition: new, Power 15 KW Hnjdpjvwfhcsfx Afnoh Technical specification:Hopper opening: 600 x 800 mmHopper capacity: 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 260 mmDrive power: 15 kWRotor speed: 90 ber of knives: 14 pieces 2 piecesType and size of knives: concave / 40 x 40 mm, reversible cutting crownsconcave / 30 x 30 mm, broaching knivesScreen perforation: 15/20 mmPaint finish: frame in RAL 5010, hopper in RAL 7016(HoKuTech standard paint finish)Connected load: 400 V /- 5 % / 50 Hzincluded:Switch cabinet (Rittal) with 5 m cableElectrical control (PLC Siemens)Star-delta startRubber oscillating elementsE-rotor with knife pockets milled into the profileGear limit switch1. Knife rowHold-down device on pusher for long and large partsLarge 40 x 40 mm knives for optimum material feedVery robust gearboxSpecial broaching knives to prevent lateral jammingMachine number: 510-5238

Condition: used, Year of construction: 2008, Used CMA drilling center Type: TRD 40 CN 9000 Table length: 9000 mm Maximum capacity: 40 mm Hnsdswc Ndwspfx Afnjh Automatic tool changer Year of manufacture: 2008

Condition: new, Technical specification: Funnel opening: 600x800mm Funnel capacity: 0.6m³ Rotor working width: 600mm Rotor diameter: 252mm Drive power: 15kW Rotor speed: 90 rpm. Number of knives: 14 pieces + 2 pieces Type and size of knives: concave / 40x40 mm, Cutting crowns concave / 30x30mm, clearing knife Screen perforation: 15/20mm Paint: HoKu Tech Standard RAL5010/7016 Connection value: 400V +/- 5% / 50Hz Includes: Control cabinet with 5 m cable Electrical control (PLC Siemens) Star-delta start-up Rubber vibration elements E-rotor with knife pockets milled into the profile Hsdpfxovyp Avj Afnenh Gear limit switch 1st row of knives Holder on the slide for long and large parts Large 40x40mm knives for optimal material feed Very robust gearbox Special clearing knife to prevent jamming at the side

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power Hjdoutmw Hspfx Afnjnh - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: good (used), Year of construction: 1999, Briquetting press type GP 120 Tandem Briquetting press for briquetting chips, wood chips and dust incl. automatic fill level indicator - Briquette diameter: 60 mm Hjdpfx Afeupwx Hsnonh - Pressing capacity: 40 - 120 kg/h * 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz - Switch cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic unit: approx. 300 litre tank for hydraulic oil - Weight: approx. 1,100 kg * 2 = 2,200 kg Used briquetting press in good condition W tong cylinder, tongs (RB 120 reinforced), tong connection flange renewed on one side (left in conveying direction) briquetting | briquette press | briquetting presses | briquette press | briquetting

Year of construction: 1993, condition: used, - working width (mm): 2200 - engine power (kW): 22 - top rollers: with PU rings Hsdpon I Twysfx Afnjnh - bottom rollers: knurled - Saw shaft: included

Condition: good (used), Year of construction: 1989, Shredder +press +conveyor belt+silo complete Hjdpfsr Dvdkox Afnonh

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW Hnedjd Iin Hjpfx Afnoh weight of the machine ca. 0,71 t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m ACTION PRICE!!! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: excellent (used), Year of construction: 2008, Machine Data Holzma HPP 230 43/43 Cutting length: 4300 mm Cutting width (program fence travel): 4300 mm Roller rail element: 10 lanes, 1 piece Roller rail (element, 2 lanes): 5 pieces Clamping grippers: 6 pieces, first 3 are 2-finger; others are 1-finger air cushion tables: 4 units, 1800 x 650 mm Central blower: 1 unit Technical Data: Saw blade projection: 75 mm Saw carriage feed: forward 1–120 m/min, reverse constant at 120 m/min Program fence speed: forward and reverse 80 m/min (EU limited to 25 m/min forward) Automatic cutting height control; pressure beam height control Angle alignment device, min. pressure width 0 mm; max. pressure width equals full cutting length Main saw motor: 7.5 kW with pneumatic saw stroke Scoring saw motor: 1.1 kW Hnsdpfx Aex Sp Saofnjh Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection value: 13 kW Power Control CADmatic 4 – Practive control system Optimization software SchnittProfit Practive for Office Labeling package including label printer

Condition: good (used), Year of construction: 1995, max. cutting length 6200 mm max. cutting width 600 mm max. cutting height 170 mm motor 11 kW Hnjdsxiu Dtjpfx Afnjh