Used Multi Spindle for sale (16,838)

Condition: good (used), Alzmetall AC 32 Turret Twin-Head Gang Drill An extremely robust and rare twin-head gang drill based on two Alzmetall AC 32 drilling units. This system is a high-quality industrial machine designed for highly efficient serial or progressive machining operations. Instead of standard spindles, this machine is equipped with two separate tool turrets. This enables fully automated machining cycles (e.g., centering, drilling, countersinking, tapping) without the need for manual tool changes. Technical Data & Equipment (per head / entire system): Drilling unit manufacturer: Alzmetall (Germany) Model: AC 32 (Electronically controlled with digital display) Drilling capacity: max. 32 mm in steel Tapping capacity: max. M 24 / M 30 Tool changer: 2x swiveling multi-station turret heads Machine table: Solid, ground cast-iron table with T-slots for flexible setup Safety: Full enclosure of the working area (safety cabin) with viewing windows for optimal protection against chips and coolant spray Pjdpfx Ajznic Uedzora Additional features: Integrated coolant system, compressed air blow-off gun, central counterweight system for easy height adjustment of the entire crossbeam You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), WEBO 4-Headed Table Multi-Spindle Drill 4×0.75 kW 200–3000 rpm Prodpfozkmfxsx Adzja

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm Pjdpfx Adozwg Tiszera - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: used, Multi-spindle drilling machine Maggi BS 35 2/26. Pedpfx Adjzkh Rcszsra

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). Prodpoywtxbsfx Adzea We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: ST D2 002, saw blade diameter: 250 mm, overall weight: 2,850 kg, cutting width (max.): 450 mm, Two-spindle multi-saw wood cutting machine JL32 Good working condition Max. 10 circular saw blades on the spindle, diameter 250mm x 70mm Main spindle dimensions: diameter 70mm, length 420mm Feed rate (cutting): 5-25 m/min Machine dimensions: length 2200mm, width 1500mm, height 1900mm Pedpfey E Snqex Adzsra Machine weight: 2850kg Voltage: 380V Main motor power: 30kW and 22kW (2950 min-1) Feed motor power: 0.75kW and 0.75kW (900 min-1)

Condition: excellent (used), CATALOG NO. 7911 TECHNICAL DATA - Number of spindles: 29 pcs - Distance between outermost spindles: 900 mm - Spindle pitch: 32 mm - Table surface: 700x1220 mm - Table height: 930 mm - Pneumatic clamps: 3 pcs - Drilling vertically, horizontally, and at an angle - Vertical/horizontal operation – pneumatic table adjustment - Pneumatic lifting of drilling head - Dimensions (L/W/H): 1400/1050/1400 mm - Weight: 744 kg Prsdpezwpaxjfx Adzea ADVANTAGES – Manufactured by Italian brand SCM – For 29 drills – Not repainted – Very good condition – Used drilling machine Net price: 5,900 PLN Net price: 1,400 EUR at an exchange rate of 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: repair required (used), Year of construction: 2001, CNC-controlled wood lathe – processes 3 parts simultaneously. No controller included. Control cabinet without a computer; the attractive price without control should be taken into consideration. Technical specifications: Maximum working length: 1200 mm Prsdpfx Adsf Ezgqszsa Maximum square section: 100 x 100 mm 3 parts processed simultaneously Programmable template Fagor control Designed for high productivity.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you: Manufacturer: INDEX Type: MS40-6 C Year of construction: 2019 Control: Index control C200-SL, MS40C Double-NCU Technical data: Working spindles: Number: 6 pcs. Spindle bore: max. 40 mm Max. speed: 7,000 rpm Power (100% / 25%): 13 / 24 kW Torque (100% / 25%): 31 / 57 Nm Synchronous spindle: Number: 1 pc. Spindle bore: 40 mm Max. speed: 8,000 rpm Power (100% / 25%): 10 / 14 kW Torque (100% / 25%): 16 / 22 Nm Slide travel z: 150 mm Number of tools for back-end machining: 3 pcs. Swiveling range b: 144 ° Tool holder: Number: 12 pcs. Slide travel x: 73 mm Slide travel z: 120 mm Tool holder, cut-off and back-boring slide: Number: 1 pc. Slide travel x: 82 mm Number of tools for back-end machining: 3 pcs. Electrical connection data: Rated power: 85 kW Connection power: 101 kVA Rated current: 145 A Max. pre-fuse: 160 A Note: Mains voltage: 400V Note: Electrical frequency 50 Hz Technical features & accessories: - Double-NCU - Signal light 'Smartlight' with LED - Machine designed for connection to a TN network. - Coolant: Cutting oil - NC option Synchronous spindle / Multi-sided turning incl. electronic shaft - INDEX loading magazine MBL40-6/3300/Strip loader/50Hz: - Strip loader 50Hz - for bar diameter D13 - D40 - Bar length 3300 mm Pjdpfezlutmox Adzsra - with pilot drilling unit - Material storage with 700 mm support area - Profibus-DP-Master interface. - 1 set (6 pieces) reducing sleeves manufactured for bar or corner dimensions, diameter D = * mm, Inner diameter range D14 - D41 - 1 set (6 pieces) material sliders for material diameter D24mm - D32mm, consisting of: - 6 material sliders D23 - 6 rotating sleeves D23 - 1 set (6 pieces) internal clamping sleeves D23mm - for material diameter D24mm - D32mm - pilot drilling diameter D15mm - 1 set (6 pieces) external stops D23mm - for material diameter D24mm - D32mm - pre-machined - 1 set (12 pieces) reducing sleeves for material sliders. The outer diameter of the reducing sleeves corresponds to the material diameter (D13 - D40) - 1 set (6 pieces) adapter sleeves, inner diameter range D13.5 - D40.5. The inner diameter of the adapter sleeves should be bar diameter + 0.5mm. - 1 set (6 pieces) two-part guide intermediate tubes, diameter 29 mm - Assembly aid for the sleeves of the guide intermediate tubes - UNIMAG - Interface for connecting a bar loader - Part discharge via slide into spindle position 6 - Workpiece conveyor belt in spindle position 6, machine-integrated - Hainbuch TOPlus Axfix D40 for synchronous spindle - Multi-sided and thread milling device - Reduction ratio i=5:1 - Inductive encoder for reference query - Internal oil lubrication - INDEX short taper connection - without converter - Back-end machining device on slide position 6.2 for max. three boring positions for fixed tools FURTHER INFORMATION IN THE PICTURES Accessories, tools and clamping devices shown are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: like new (used), operating hours: 20 h, functionality: fully functional, TECHNICAL DATA Number of spindles: 21 Distance between first and last drill bit: 640 mm Distance between centers of individual spindles: 32 mm Maximum workpiece size: 50 x 915 x 3000 mm Maximum drilling depth: 65 mm Number of pneumatic hold-downs: 2 Working table height of the drilling machine: 860 mm Maximum hold-down height above table: 70 mm Operating pressure: 6–7 bar Air consumption: 10 l/cycle Motor power: 1.5 kW Noise level: 76.1 dB Speed: 2800 rpm Dimensions L/W/H: 1030/1030/1285 mm Weight: 275 kg Psdpfey At Ndex Adzjra PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling operations from 0 to 90° - Pneumatically adjustable drilling head angle - Cast-iron stops - Spindles suitable for quick couplings - Patented pneumatic workpiece clamps - Cast-iron worktable - Fast and precise adjustment - Accurate drilling - Made in Italy Standard equipment of the machine: - 2 aluminium measuring scales, each 1.5 m (right and left) with two stops - 5 quick couplings - Wooden transport box for machine protection during transport ADVANTAGES - Drilling vertically/horizontally/at an angle - Multi-spindle drilling machine - New machine - CE certificate - Robust - Professional Net price €2,950.- Machine shipping not included Packaging included Net prices apply to international transactions and EU customers with a valid EU VAT ID No.

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Psdoy Ed Atepfx Adzera Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: 49C7264, 8-spindle automatic lathe (90), make Schütte, model AF32, year 1988, SN 49C7264, bar feeder by Pietro Cucchi with integrated chip conveyor, with C-axis and control, make Siemens, model Sinumerik System 3 Psdpfx Adsy Drclozora

Condition: good (used), Year of construction: 1974, TOYOSK 01BB Fixed 12 Multi Spindle Machine Manufacturer: TOYOSK Type: 01BB Year of manufacture: 1974 Spindle: 12 Bore: 6mm, 12 points simultaneously Feed: 100mm Speed: 2-speed (2500 / 2850rpm) Prsdpsvbcydjfx Adzoa Spindle diameter: 19-23 mm Table size: 350 x 450 mm Spindle speed: 2200-450 mm Power: 1.5 kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: used, Year of construction: 2019, functionality: fully functional, feed length X-axis: 318 mm, feed length Y-axis: 51 mm, feed length Z-axis: 584 mm, number of spindles: 2, spindle speed (max.): 4,500 rpm, spindle bore: 51 mm, Equipment: cooling unit, documentation/manual, The DS-30Y Y-axis turning center combines turning with two spindles, a Y-axis, a C-axis, and powered tooling to create a powerful “one-hit” solution for any workshop. Milling, drilling, and off-center threading can be enhanced for increased machining capabilities. It comes standard with a 12-station BMT65 turret and a synchronized C-axis for versatile 4-axis capabilities. Counter spindles support fully synchronized rotation and enable workpiece transfer during operation to reduce cycle times. Predpfx Aezvy D Eodzja Spindle | CHUCK-10"-A2-6 4.8K-20HP-A2-5-DS | CHUCK-8.3"-A2-5 LT-BMT65-12 Live Tooling 4000 rpm CONVEYOR ATP Automatic Tool Presetter PCAT Part Catcher HPC High-Pressure Coolant CABCOOL NGC | 1GB, ETHERNET, WIFI, EPFDM SO, MACRO, RTAP, 8M

Condition: excellent (used), Year of construction: 2011, The grinding machine is in very good condition and fully operational. Predpfx Aoyuyucsdzoa

Condition: like new (used), Year of construction: 2015, Pick-up Prjdpfx Adoyck Rdszja Threading device No. 04 turning slides Integrated loader Cucchi BLT model MULTI-6, year 2016

Condition: excellent (used), Multi-spindle drilling machine SCM Type FM 29/S 29 spindles Pjdpfx Asvxtfrjdzsra Distance 32 mm Table 1200 x 780 mm Max drilling depth for vertical drilling 100 mm/ horizontal 60 mm Spindle speed 3800/min

Condition: excellent (used), functionality: fully functional, TOYOSK 01C 550II-TMS Fixed 48 Multi spindle Machine Manufacturer: TOYOSK Type: 01C 550II-TMS Spindle diameter min.: M4x8 Spindle diameter max.: M4x15 Table size: 280x360mm Spindle speed: 430, 710, 1030 Power: 1.5kW Pedowcp Enepfx Adzera Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings) If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Year of construction: 2014, See documents. Prsdjzqtg Aspfx Adzea List of individual machines with operating hours, etc. – see documents.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 23109, CNC 6-Spindle Lathe Index MS42C Year of manufacture: 1998, Serial number 23109 Control: Index Bar loader: Index/Hydag Maximum bar diameter: 42 mm Chip conveyor and fleece filtration system: Knoll CO2 extinguishing system: Kraft & Bauer ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailor-made financing solutions that suit your needs. Whether you prefer a down payment, installment plan, or custom financing model – together we will find the right solution. Prodpfx Adoyzicwjzsa Upon request, we will also handle the entire transportation logistics for you. From planning to reliable delivery, we ensure a smooth and timely process so that you don’t have to worry about a thing. 📞 Please contact us for further information or a non-binding quote. We offer you professional and personalized advice.

Condition: used, Technical specifications: Number of spindles: 27 Prjdpozvmvhsfx Adzoa Distance between the first and last drill: 832 mm Distance between the centers of individual spindles: 32 mm Drilling depth adjustment: 0-80 mm Number of pneumatic clamping devices: 3 Operating pressure: 6 – 8 bar Drills mounted with quick-release fittings Pneumatic spindle rotation Motor power: 1.8 kW Manufacturer: Vitap Overall dimensions Length: 1260 mm Width: 930 mm Height: 1330 mm

Condition: used, Pick-up truck Predpfx Adszi U H Iozsa pick-up control unit Pietro Cucchi full-body loader

Condition: excellent (used), Catalog number: 8071 TECHNICAL DATA - Number of spindles: 21 pcs - Distance between extreme spindles: 640 mm - Spindle spacing: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 900x350 mm - Height to table surface: 900 mm - Stroke of feed cylinder (drilling depth adjustment): 50 mm - Drilling speed, pneumatically adjustable - Drilling angle, manually adjustable - Main motor: 1.5 kW - Side guides: 400 mm Pedpfx Adjzuk Aiezjra - Compressed air requirement: 6-8 bar - Diameter of dust extraction port: 60 mm - Dimensions (L/W/H): 1000x860x1270 mm - Weight: 267 kg ADVANTAGES – Made in Italy – 21 spindles – drill bits mounted on quick-release fittings – Drilling in vertical, horizontal, and angled positions – Unpainted – Used drill press, very good condition Net price: 6900 PLN Net price: 1643 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: good (used), Code: 0431 Brand: GRIGGIO Model: GF 27 - CE Standard Multiple boring machine with 27 spindles for furniture, custom-made furniture, kitchens, joinery, panels, bathroom furniture and various – CE Standard Technical specifications: N° 27 quick-change spindles Podpfszipq Isx Adzora Centre-to-centre distance between each spindle 32 mm Total centre-to-centre distance between the first and last spindle 832 mm Max drilling depth 85 mm Table dimensions 1050 x 380 mm Motor 2 Hp N°2 pneumatic workpiece clamps Squares on the worktable Drill bit holder Pneumatic head tilting from 0 to 90°, allowing drilling in any position Extension rods for stop holders Quick Dept Overall dimensions mm 1200 x 780 x 1300 h Weight kg 360

Condition: used, Tornos CNC-controlled multi-spindle automatic lathe Type/Model: Tornos MultiDeco 20.6 Condition: used Operating hours: 45,300 h Bar stock: Ø 5-22 mm Max. part length without secondary operation: 100 mm Max. part length with secondary operation: 80 mm Prodpfjzgwtxox Adzoa Spindle rotation speed up to: 4000 rpm Max. spindle power: 15 kW Max. drilling/internal threading power: 3.7 kW Counter-spindle motor power: 1.1 kW Number of numerical axes: 17 Axial slide: 5 Cross slide: (radial and axial) 5 (Pos. 1 to 5) Facing slide: 1 CNC-controlled secondary operation slide with up to two secondary operation tools (Pos. 7) Connection value: 35 kW Dimensions (L x W x H): approx. 8053 mm x 1508 mm x 2210 mm Weight: approx. 8500 kg Equipment/Accessories: - Control system: Tornos PNC Deko - HIRTH - Gear cutting drum locking system - Spindle stop at Pos. 4 (activated via installation curves) - 2 quick-change drilling spindles XC06020.01; GWS Modular 40004; up to 80 bar - 3 fixed drilling units GWS Modular 40004; up to 80 bar - 7 base plates for tool holders GWS 60 AD60032 (Göltenbodt) - 7 base holders for turning tools GWS 60/41 (Göltenbodt) - Bar feeder integrated: TORNOS MSF 522/6 - Material guide channel for bar feeder - CO2 extinguishing system Kraft und Bauer - Oil treatment system Knoll: VRF 500/1550 - 2 high-pressure pumps, each 40 L/40 bar - 1 pump, 20 L/35 bar - Oil capacity approx. 2000 liters - Chip conveyor Knoll - No discharge chute