Used Hsc for sale (157)

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 450 mm z-travel 300 mm CNC-control Roeders RMS6 table-size 700 x 550 mm max. table load 800 kg spindle turning speed range 42.000 U/min feed stepless 0 - 30.000 mm/min rapid traverse 30 m/min drive capacity - spindle motor 14 kW tool change unit Pick-up 18 Pos. voltage 400 V total power requirement 20 kVA weight of the machine ca. 5,2 t dimensions of the machine ca. 3,00 x 2,30 x 2,70 m - Serial No.: 88231-83 Chsdpjfff Rfefx Agksa - HSC spindle Fischer MFW1230/42 - Dust extraction system

Condition: used, This listing is for 1 of 2 Velp Scientific HSC Heating Magnetic Stirrer. Cedpfx Aoxx Ai Negkoha The unit is in full working condition and is ready for immediate release. The Velp Scientific HSC Heating Magnetic Stirrer is an analogue heating magnetic stirrer designed for basic heating and stirring applications in chemistry, biology, and pharmaceutical laboratories. It features a rugged design with a ceramic heating plate that resists acids, bases, and solvents, and a techno-polymer casing that resists chemicals, scratches, and surface abrasions. Key Specifications Maximum temperature: 400°C Stirring volume: up to 15 liters Stirring speed: up to 1300 RPM Heating control: Analog Ceramic hot plate: Square-shaped and resistant to chemicals and scratches Power supply: 115V/60Hz Dimensions: 8x3.7x13.5 inches

Condition: used, Year of construction: 2008, x-travel 700 mm y-travel 420 mm z-travel 610 mm Control Heidenhain output 22 kVA weight ca. 5.200 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Erowa automation Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale! Chsdpfezq Hkhex Agksa

Condition: ready for operation (used), Year of construction: 2003, Available immediately ex works: CNC milling machine OPS Type OPS HSC 600 Year of manufacture 2003 CNC control Andronic 3D path control with Ethernet interface Travel ranges X/Y/Z 625/375/350 mm Tool changer mounted on Erowa, 40 positions Spindle speeds 5,000 – 40,000 rpm Fixed table, load capacity up to 600 kg Chjdpfx Aozrlwvsgkja Travel speed up to 20 m/min Repeatability 0.002 mm Tool changer, 32 positions Spindle HSK 32 E Drive power 9 kW Weight 3500 kg Price: EUR 9,500.00 plus VAT, ex works

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, table width: 380 mm, table length: 920 mm, overall weight: 3,750 kg, spindle speed (max.): 36,000 rpm, spindle motor power: 17,800 W, number of slots in tool magazine: 28, number of axes: 5, This 5s FEHLMANN PICOMAX 60 HSC vertical machining centre was manufactured in 2008. It features a table size of 920x380 mm and offers impressive spindle speeds of up to 36,000 rpm. With a robust weight of 3750 kg, this machine is designed for precision and durability. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 60-HSC machine we have for sale. Contact us for further details. • Table size: 920x380 mm • Feed Rate Range: 1 - 20,000 mm/min • Spindle replaced in 2015 • Software Options: Option 1 (Rotary table machining, cylinder contour programming, swiveling plane), Option 2 (3D machining, TCPM, 5-axis linear/spline interpolation) - CNC Dividing Unit: ATS 160 CNC-SDK (automatic CNC dividing and swiveling unit, 2-axis simultaneous interpolation) - Workpiece Loading System: EROWA EasyHand with 60 ITS50 holder capacity (Max workpiece dim: D 172 x 320 mm) - Process Monitoring & Measuring: Renishaw MP 40 3D touch probe, Renishaw NT laser system for tool measuring (D 0.15 to 63 mm) - Dust/Graphite Extraction System: Industrial dust extractor Type 16.2.5 (3.1 kW turbine, 1,680 m³/h capacity, 100 l tank) - Additional Equipment: Enclosure with sliding doors & polycarbonate windows, enclosure top cover, minimal quantity lubrication system, oil mist extraction, switch cabinet cooling device, chip tray, coolant spray gun, handbox Technical Specification Taper Size HSK 50 Cjdpfeyizpdjx Agksha

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 35,000 rpm, number of axes: 5, This 5s FEHLMANN PICOMAX 90-HSC + Erowa automation was manufactured in 2005. It features a table size of 1260x490 mm, with an impressive spindle speed of up to 36,000 rpm and a control system by Heidenhain TNC 530. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 90-HSC + Erowa automation we have for sale. Contact us for further details. Chjdpfx Ajyizugogkoa • Table size: 1260x490 mm Additional equipment • incl. EROWA Robot Multi automation • Item 20 (Article No. 3391-176): 1 Pc. Continuous Path Control Heidenhain iTNC 530M (Standard Base Version) Item 30 (Article No. 3360-181): 1 Pc. Software Option 1 for iTNC 530M (Rotary table machining in mm/min, programming of contours on the cylinder surface, tilting of the working plane, including circular interpolation in 3 axes) Item 40 (Article No. 3360-182): 1 Pc. Software Option 2 for iTNC 530M (3D machining: smooth movement, 3D tool compensation, TCPM, 5-axis linear interpolation, splines, block processing time 0.5 ms) Item 50 (Article No. 3391-211): 1 Pc. Standard Clamping System Item 60 (Article No. 3390-220): 1 Pc. Machine Table 1260x490 with 9 T-slots 12H8, 50 mm distance Item 70 (Article No. 3391-240): 1 Pc. Tool Changing System with 28 magazine slots HSK-E50 Item 80 (Article No. 3390-270): 1 Pc. Side Enclosure of the machining area made of stainless sheet metal, with wide-opening sliding doors at the front and polycarbonate panes. Incl. 2 anti-stroboscopic lights. Right side door manual or optional automatic opening. Item 90 (Article No. 3390-272): 1 Pc. Right Side Door with window, lockable Item 100 (Article No. 3390-275): 1 Pc. Automatic Enclosure Door left to P90 for workpiece loading. Incl. 2 pneumatic cylinders, guides, control valve and control circuit for CNC control. Item 110 (Article No. 3390-288): 1 Pc. Full Enclosure of the machining area towards top (32/28 tools), with lockable recess for loading crane. Item 120 (Article No. 3360-506): 1 Pc. Extended Energy Saving Function via electronic timer. Automatic standby switching of machine drives after completion of NC programs and restart of the plant. Item 130 (Article No. 3360-842): 1 Pc. Oil Mist Extraction System for machining area Item 140 (Article No. 3390-851): 1 Pc. Standard Coolant System 3 bar / 30 l/min with 2 submersible pumps, chip drawer, additional fine chip filter insert and stretch mesh filter. Coolant tank 240 l capacity. Item 150 (Article No. 5130-101 Special): 1 Pc. Preparation for Minimal Quantity Lubrication system. Hoses routed through machine head to spindle. Switchable via M-functions. Item 160 (Article No. 3363-872): 1 Pc. 3D Touch Probe System Renishaw MP 40 incl. spindle insert HSK E50, touch stylus Ø 6 mm, signal transmission wireless via infrared system. Self-calibrating with 360° radiation. Item 170 (Article No. 3390-877): 1 Pc. Laser System NT for high-precision measurement and monitoring of tools D 0.15 to 63 mm. Cycle-supported measurement of diameter and length as well as contour stability. Includes automatic alignment and checking of CNC tool table. Item 180 (Article No. 3360-918): 1 Pc. FEHLMANN HSC Settings (Cycle 327) for dynamic optimization of digital axis drives. Item 190 (Article No. 4875-114): 1 Pc. Automatic CNC Indexing and Swiveling Unit ATS 160 CNC-SDKD--ITSPC in digital execution with Erowa quick-clamp chuck ITS Power Chuck. Center height: 160 mm. Swivel range: +18° to -5°. Max. workpiece diameter: 300 mm. Max. workpiece weight: 50 kg.

Condition: used, all stainless steel electrically heated, max. 280°C adjustable speed 11 inspection/cleaning hatches belt width ± 1.000 mm net length ± 7.500 mm with belt wash system outside dimensions (l x w x h) : ± 9.500 mm x 1.600 mm x 2.400 mm Modular construction system Conveyor belt (opening 13 mm) total power 224 kW heating steam pressure: min 3 bar 10 kg/h per valve max. 3 bar 140 kg/h per valve cooking time min/max : 4min 36sec-120min steam injection (to heat up and to improve product yield) Chodszg U Dnopfx Agkea

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Precision machining center HSC 30 linear 5 axes Chedpfx Aszlhmmjgkea Siemens 840D Travel range X/Y/Z 320 /300 /280 mm B-axis: +/- 120° C-axis: 360° Rapid traverse rate 50 m/min Spindle speed range 0 - 40,000 rpm AC main drive with 19.5/15 kW and 16/12 Nm Incl. spindle cooling and rotary union Tool holder HSK-E 40 according to DIN69893 Linear axis drive package Tool magazine, 30 positions, double gripper Active cooling unit for main spindle and linear drives Direct absolute linear encoders 3D control Quick-change system EROWA ITS 150 Measuring probe Blum TC 52 Blum laser Interface for handling system EROWA IKZ 40 bar Electronic handwheel Coolant gun Compressed air Production package EROWA Robot Compact 80 50 pallet positions for ITS 148

Condition: used, Year of construction: 2003, Milling machines Travel distance X: 415 mm Travel distance Y :340 mm Travel distance Z: 355 mm HSC-machines Number of axis: 3 milling machine / machining center Chodpfxjvtfpfo Agkoa Control: Heidenhain iTNC 530 spindle chuck: HSK 40 E spindle revolutions: 42000 rpm table size X: 470 mm table size Y: 400 mm max. workpiece weight: 500 kg tool changer: 30 - time Rapid traverse: 30 m/min electronic handwheel

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 88462-85, feed length X-axis: 30,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 30,000 mm, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 42,000 rpm, total height: 2,700 mm, total width: 3,000 mm, total length: 5,000 mm, table width: 550 mm, table length: 860 mm, overall weight: 7,000 kg, workpiece weight (max.): 800 kg, controller manufacturer: RÖDERS, controller model: RMS 6 VERSION 4.20, positioning accuracy: 0.005 mm, Equipment: documentation/manual, RÖDERS RFM 760/2 HSC Milling Machine - Includes two EROWA clamping systems - Additional matching accessories - A cooling system and extraction system - Also includes a workbench with fixtures and a 3D measuring probe Chsdpfx Aozlfa Degkea Note: The machine can be transported on a standard truck! Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. OPTIMUM F 200 HSC Premium CNC milling machine, directly from the manufacturer. F 200 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is characterized by its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Heavily ribbed, torsion-resistant machine base · Profile rail with recirculating roller guides for high rapid traverse speeds in all axes · Powerful servo drives in all three axes · Telescopic guide cover on all three axes · Automatic lubrication · Solid, precise milling table with five T-slots, large dimensions, and precision-ground surface · The portable, electronic handwheel with feed override button and emergency stop switch facilitates the easy execution of programs Nwswouy Tckex Eb Ncsi · Coolant system with chip flushing system and cleaning gun · Spindle internal cooling with 20 bar · Chip conveyor in belt design ensures efficient chip removal · Chip cart · RJ45 connection and power connection 230 V · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents the ingress of dirt particles · Machine light in the work area · Additional package SIEMENS material defect liability and free online/on-site service OSS Plus · 1 year maintenance contract Basic included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected power 20 kVA Milling spindle Drive motor S1 operation 10.5 kW Torque of drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque of drive motor S6-30% operation 125 Nm Spindle mounting SK 40 / DIN 69871 Coolant system Performance of coolant pumps, 3 pieces 1 kW Flow rate 35 l/min Tank capacity 200 liters Cleaning pump Performance of cleaning pump 530 W Milling accuracy Repeatability ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Type Double-arm gripper Number of tool positions 24 Tool diameter max. 78 mm Tool diameter (auxiliary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time for tool change: Tool to tool 2.5 seconds Travel range X-axis 850 mm Y-axis 500 mm Z-axis 550 mm Feed drive Rapid traverse X, Y, Z axis 48 m/min Torque motor X/Y/Z axis 16 Nm / 16 Nm / 20 Nm Feed forces X/Y/Z axis 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 - 8 bar Air consumption per hour 6 - 8 kg/m³ Cjdpfx Agozi Ex Uokeha Milling table Distance spindle - table 100 - 650 mm Table length x width 1,000 x 500 mm T-slot size / number / spacing 18 mm / 5 / 100 mm Load capacity max. 500 kg Dimensions Length x width x height 2,400 x 2,355 x 2,860 mm Total weight 5,500 kg

Year of construction: 2025, condition: new, functionality: fully functional, Currently available for immediate delivery - HSC 350MG from NCmind! our smallest and “lightweight” machine. With only 900kg still easy to handle but solid and strong enough for outstanding surface quality. The mineral die cast basement and portal structure are rigid and vibration damping. Cjdpfxom Hd Ifj Agkjha With traverse paths of 380 mm x 350 mm x 180 mm, it is the universal companion and should not be missing in any workshop! The 40-station HSK-E25 tool changer belongs to standard equipment as well as a water cooled 40.000rpm spindle with up to 6kW power. The HSC 350 is also extremely space efficient! With only 1060mm x 960mm x 2100mm (LxWxH, without operators panel) it fits through almost every door! More information in the pdf, by e-mail or by phone - NCmind GmbH

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. The machine comes as standard including: - Original documentation for the machine and the Weiss spindle - BLUM tool laser - Heidenhain TS-440 3D probe - Spindle and emulsion cooler - Lockable roof (harmonica style) Chjdpfxjxgukbj Agkea The machine can be inspected under power by appointment.

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor Csdsw Ed U Nspfx Agkeha - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller model: RMS6, Versie 3.18, total height: 2,600 mm, total length: 4,210 mm, total width: 2,350 mm, table width: 405 mm, table height: 405 mm, table load: 800 kg, rotary table diameter: 405 mm, spindle speed (max.): 42,000 rpm, spindle nose: HSKE40, number of spindles: 1, number of slots in tool magazine: 26, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Röders RFM 600-DS is a high-speed (HSC) milling/machining centre. Chodpfxjxcvgis Agkea This machine is designed for applications such as high-precision engineering, high speed cutting (HSC), and for small to medium-sized workpieces like mould parts, tools, injection moulding frames, precision components, housings, and complex geometries. The machine is equipped with a chip conveyor, Blum laser, 3D tool probe, Hirschmann 9000 zero-point clamping system, electronic handwheel, Extor extraction unit, and all original documentation. Weight: approx. 7000kg Dimensions: 4210x2350x2600 (LxWxH) For further information such as positioning accuracies, see last image!

Condition: excellent (used), Year of construction: 2019, operating hours: 21,500 h, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 355 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece length (max.): 470 mm, workpiece width (max.): 400 mm, workpiece weight (max.): 500 kg, total height: 2,431 mm, total length: 2,069 mm, total width: 2,328 mm, table load: 500 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 9,500 h, distance table to spindle center: 495 mm, spindle motor power: 13,000 W, number of spindles: 1, number of slots in tool magazine: 16, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Milling spindle HVC140 HSK-E40 - Milling power S1/S6 40%: 10kW/13kW. Ceramic ball bearings with minimum oil air lubrication. Tool Changer 16 positions for HSK40E (tools until diam. 16 mm and maximum length of 75 mm. Tool measurement with Blum laser (annex on the left) with lasersystemm including tool breakage control. For measurment rotating tools of dia. 0,2 mm by dia. 16mm in the machine. Minimum tool length 45 mm. Tool presenting lapse. Preparation for graphite- extraction L-CUT for vacuum extraction system, consisting of enclosure, roof and pipe union. Graphite extration system. Included preparation for graphite extraction. Air throughput rate approx. 1400 m3/h. Motor output 2,2 kW, noise level approx. 73 dB (A). Rest dust content in exhaus air= max. 0,5 mg/m3. Dust contents are 15 times lower than the MAK values. Sound absorber fo L-CUT. Reducing of acoustic pressure level for approx. 9 dB (A) Remote control Heidenhain. Manual control with setup functions, electric hand wheel and enable button. Cooling system Hydac for spindle. Automatic lubrication system. Additional LED workroom lamp. Oil mist lubrication unit. Language English (system) Infrared probe Renishaw OMP 400 HSK 40 Cedozpybwspfx Agksha The machine will be disconnected and dismantled on 16 September 2026. Until then, it will remain connected and in active production. In July 2026, the ball screws, including the bearings, were replaced on the X and Y axes. All spindle filters and oil were also replaced. Our company is an authorized Exeron dealer and service partner. Therefore, the machine will be professionally disconnected and prepared for transport. The price also includes professional loading onto the truck and securing the machine on the truck for transport. The machine dimensions do not include the graphite extraction system. The complete layout is provided in the attached document.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 460 mm, controller model: HEIDENHAIN ITNC 530, spindle speed (max.): 28,000 rpm, TECHNICAL DETAILS Number of axes: 5 Travel range, X-axis: 450 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 460 mm Swivel angle (A-axis): -10 / +110 ° Tool magazine Number of positions: 60 Maximum tool diameter: 80 mm Maximum tool length: 250 mm Maximum tool weight: 6 kg Chsdpozaqhqefx Agkoa Tool holder and spindle Tool holder: HSK 63 Minimum spindle speed: 2 rpm Maximum spindle speed: 28,000 rpm MACHINE DETAILS Operating time according to counter: 94,552 h Operating hours according to counter: 24,219 h Connection voltage: 400 V Spindle power: 38 / 28 kW Total power consumption: 70 kVA Dimensions & Weight Dimensions (L x W x H): 3,210 x 2,930 x 2,900 mm Machine weight: approx. 9,500 kg

Condition: used, Year of construction: 1988, color: orange, empty load weight: 2,500 kg, mileage: 1,001 km, first registration: 01/1988, gearing type: other, driver cabin: other, Vehicle location: Bovenden, Body: Tiek paper self-pressing container 380 V, approx. 10m³ both hydraulic rams overhauled approx. 20 hours ago ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Chsdorfb Awspfx Agkja - .

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming Codjvt Dwbspfx Agkoha - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: like new (used), Year of construction: 2009, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, controller manufacturer: HEIDENHAIN iTNC530, workpiece weight (max.): 15 kg, table width: 200 mm, table length: 200 mm, spindle speed (min.): 42,000 rpm, Control CNC: HEIDENHAIN iTNC530 Axes X-axis travel mm: 200 Y-axis travel mm: 220 Z-axis travel mm: 280 C-axis degrees: 360º A-axis degrees: -15º max.130º Work Table Table dimensions mm: ø200 Maximum workpiece weight kg: 15 Chedpfx Agjxpg H Hokea Spindle Spindle speed rpm: 42.000 Cooling Cooling through the spindle bar: 40 Tool System Tool holder: HSK-E32 Tool magazine slots: 60 Max. tool diameter mm: ø50 Max. tool length mm: 200 Chip-to-chip time s: 10 Equipment Automation LM100 (EROWA ITS72, 5 levels of 9 positions); 10 kg maximum manipulation Electronic handwheel Chip conveyor Infrared probe High-pressure pump NC rotary tilting table Rated power kVA: 40

Condition: like new (used), Year of construction: 2013, operating hours: 39,945 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 5,500 mm, total width: 2,650 mm, spindle speed (min.): 28,000 rpm, coolant supply: 40 bar, Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Chjdjxv Av Rspfx Agksa Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Arrangement for external pallet management Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine running times Under power: 62983 Spindle Working: 39945 Rated power kVA: 60 Basic machine dimensions / weight Length mm: 5500 Width mm: 2650 Height mm: 2900 Weight kg: 9500 + system 3R

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale are spare parts from a 3-axis CNC machining center of the brand Ingersoll, model OPS 800. Ideally suited for the production of graphite electrodes thanks to its high-speed spindle. The machine has been disassembled, and individual components such as the controller, extraction system, spindle, and control panel are available for sale. Please let us know which parts you require, and we will provide you with a tailored offer. Technical Data: Year of manufacture: 2004 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Csdpfx Ajuu Rthsgksha Control system: ANDRON Spindle speed: 42,000 rpm Tool changer: 36 positions Tool holder: HSK 63 Included: - Graphite dust extraction system - Chip trays - Cooling system Tooling not included. Transport and loading can be organized throughout Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Condition: used, DMG HSC 55 linear is a 5-axis machining center designed for precision, high accuracy and reliable performance. Travels X 450 mm, Y 650 mm, Z 460 mm; A-axis -10/+110°; tool magazine 120 places; tool Ø max 80 mm, length 250 mm, weight 6 kg; spindle taper HSK 63. Spindle speeds 2–28,000 min⁻¹; spindle power 38/28 kW; supply 3x400 V 50 Hz; total power 70 kVA; machine weight ≈9500 kg; dims L3210×W2930×H2900 mm. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and toolmaking. Cedpfx Aoyxn Efegkeha

Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Cjdoy A H Tpepfx Agkoha Digma HSC 500, year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, spindle speed up to 42,000 rpm, tool holder HSK 40, laser diameter measurement, oil mist lubrication system, extraction for graphite machining, 3D infrared measuring probe, The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.

Condition: excellent (used), Year of construction: 2001, HSC milling machine DIGMA 500GC Chjdpfx Agsy Hqauokea Serial No.: 05-191 Year of manufacture: 2001 Control: Heidenhain TNC 426