Used Mazak Multiplex 420 for sale (328)

Condition: used, Year of construction: 1998, overall weight: 8,500 kg, Technical Data | Specification Machine Type | CNC turning/milling center Control System | Mazatrol Fusion 640T Year of Manufacture | 1998 Spindles | 2 Turret | 2 Y-axis | ± 50 mm X-axis | 240 mm Z1-axis | 440 mm Z2-axis | 495 mm C-axis | 0.001° Max. Turning Diameter | approx. 260–320 mm* Bar Capacity | 51 mm Spindle Bore | 61 mm Spindle Speed | 35–5,000 rpm Spindle Motor | 22 / 15 kW Max. Torque | 349 Nm Spindle Nose | A2-6 Lsdpszx Sirjfx Akljhl Chuck | approx. Ø 210 mm Tool Positions | 2 × 12 Driven Tools | 2 × 12 Drive for Driven Tools | 3.7 kW Speed of Driven Tools | 25–4,500 rpm Tool Holder | VDI 40 Rapid Traverse X | 30 m/min Rapid Traverse Y | 10 m/min Rapid Traverse Z | 33 m/min Machine Weight | approx. 8.0–8.5 t Connected Load | approx. 76–77 kVA

Condition: good (used), Year of construction: 2005, turning length: 200 mm, turning diameter: 350 mm, Used Mazak Multiplex 6300 Max turning diameter approx. Ø 350 mm Max turning length approx. 200 mm Many fine tools included "Auto operation" hours: 76,300 Gantry loader max. 2 x 40 kg 2 spindles, 2 axes per spindle (X/Z), C-axis, M-spindle Lsdpfey I Sfujx Aklehl Portal load and unload table

Year of construction: 1992, condition: ready for operation (used), Turrets: 2, tool stations: 12, tool holder: VDI 40, max. turning diameter: 320mm, max. swing diameter: 390mm, spindle bore: 61mm, speed: 5000rpm, spindle power: 15kW, travel X/Z: 230mm/430mm, machine dimensions X/Y/Z: 3900mm/2000mm/2900mm, weight: approx. 8600kg. Including robot. Documentation available. On-site inspection is possible. Lhedpfx Aksyhgpaelel

Condition: used, Year of construction: 2007, swing dia. 430 mm Distance between the spindles 1450 mm control MAZATROL 640T x-axis 310 mm z-axis 605 mm spindle tunring speed 4.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Gantry Loader Lhsdeyb S Nrjpfx Aklsl Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 1999, spindle motor power: 22,000 W, number of axes: 3, This 3-axis Mazak Multiplex 6200 was manufactured in 1999 and features dual spindles with a maximum speed of 5,000 rpm and a drive power of 22/15 kW each. It includes an ABB robot and turrets on both the right and left with 12 tools each. Rapid traverse rates are 30.5 m/min for the X-axis and 33 m/min for the Z-axis. If you are looking to get high-quality turning capabilities consider the Mazak Multiplex 6200 machine we have for sale. Contact us for more information. Lhsdpsx Nr S Dsfx Akljl Machine Benefits Technical Machine Benefits • Right and left turrets: 12 tools each • Axes: 3; including abb robot • Main motor: 200 v

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, empty load weight: 8,400 kg, Submission of a bid obligates timely collection in calendar week 1 or 2 of 2026! Lhjdjxzubpjpfx Aklol Lathe with gantry loading! MACHINE DETAILS Weight: 8,400 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150602, turning length: 1,190 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 440 mm, TECHNICAL DETAILS Travel X-axis: 230 mm Travel Z-axis: 440 mm Turning diameter: max. 320 mm Turning length: max. 1,190 mm Bar capacity diameter: max. 51 mm Swing diameter: max. 320 mm Spindle nose: A2-6 Draw tube thread: M60 x 2 Main spindle speed: 35–5,000 rpm Driven tool speed: 4,500 rpm Rapid traverse speed: 30.5/33 m/min Turret stations: 24 Tool holder / Turret type: VDI Ljdpfjypdw Djx Aklohl MACHINE DETAILS Electrical and Safety Voltage: 400 V Protection class: 1 Connected load: 77.4 kW Footprint & Weight Footprint: 6.5 m² Machine weight: 7,900 kg EQUIPMENT Portal loader GL 100 F

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, empty load weight: 8,400 kg, Lathe with gantry loading! Lhsdpfoypc Ibjx Aklol MACHINE DETAILS Weight: 8,400 kg

Condition: used, Year of construction: 1995, Manufacturer: Mazak Model: Multiplex 420 Year of manufacture: 1995 Control: Mazatrol T32-4 / depending on the version Number of spindles: 2 Number of turrets: 2 Number of tool positions: 12 + 12 = 24 Spindle nose: A2-6 Spindle bore: approx. 61 mm Bar diameter: approx. 51 mm / 2" Spindle speed: up to approx. 4,000 rpm Spindle motor: approx. 25 HP / 18.5 kW per spindle Max. turning diameter: approx. 318 mm Lhedpfx Akozx Tf Uslsl Max. diameter over cross slides: approx. 260 mm X-axis: 228 mm Z1-axis: 438 mm Z2-axis: 492 mm Max. distance between spindles: approx. 1,190 mm Tool holder: Modified VDI Turret: 12-position, drum/dodecagonal Machine weight: approx. 8.0–8.2 t

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning diameter: 540 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 1,065 mm, controller model: Mazatrol 640, TECHNICAL DETAILS X-axis travel: 530 mm Y-axis travel: 140 mm Z-axis travel: 1,065 mm Z2-axis travel: 1,005 mm X-axis rapid traverse: 30,000 mm/min Z-axis rapid traverse: 33,000 mm/min Y-axis rapid traverse: 15,000 mm/min Z2-axis rapid traverse: 20,000 mm/min Milling spindle speed: 15–6,000 rpm Milling spindle motor power: 7.5 kW Max. milling spindle torque: 62.29 Nm Max. swing diameter: 540 mm Chuck size: 8" Max. machining diameter: 540 mm Max. machining length: 1,018 mm Max. bar diameter: 51 mm Main spindle Spindle nose: JIS A2-6" Spindle bore diameter: 61 mm Spindle speed: 35–5,000 rpm Motor power (30-minute rating): 22 kW (?) Max. torque: 350 Nm Counter spindle Spindle nose: JIS A2-6" Spindle bore diameter: 44 mm Spindle speed: 35–5,000 rpm Motor power (10-minute rating): 7.5 kW Max. torque: 57 Nm Turret type: Spindle turret with ATC Tool size (external turning tool): 25 mm Tool size (internal turning tool): 40 mm Max. milling tool diameter: 120 mm (?) Max. milling tool length: 250 mm Indexing time (90°): 0.5 s Ljdpfx Akezyl Hgslohl MACHINE DETAILS Control: Mazatrol 640 Coolant tank volume: 250 l Power consumption (continuous): 32.7 kVA Dimensions & Weight Dimensions (L x W x H): 3,485 x 2,105 x 2,416 mm Machine weight: 7,500 kg EQUIPMENT Documentation Chip conveyor

Condition: excellent (used), Mazak Quickturn Nexus 300 CNC Lathe Ljdpfjzh Ndxjx Aklehl Capacity Maximum bar size diameter - 77mm Maximum cutting dia - 420mm Maximum swing - 680mm Spindle Main spindle speed : Max 4,000rpm / Min 35rpm Main spindle workpiece weight ( including chuck) 450kg Spindle bore - 88mm Spindle centre line - 1080mm Spinel nose - A2-8 Axis Travel X axis 225mm Z axis 680mm Cutting feedrates (x axis max) 8m/min (z axis max ) 8m/min Rapid traverse X axis (max) 30m/min Z axis (max) 25m/min Turret Toolsize turning tool shank - 25 x 25 Turret indexing time 1/2 full turn 0.8 secs single step 0.2 secs No of stations on drum turret 12 Tailstock (not chucker) Body movement motor driven Body stroke 645mm Mounting taper No5 Standard centre supplied No5 Chucking systems Chuck cylinder S2078-15Y Chuck Type B210A815X Jaw stroke on diameter 8.8mm Main chuck diameter 10" Mazatrol PC Fusion CNC 640T Nexus CNC Control

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 242536, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, table load: 1,200 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, MACHINE INFORMATION Manufacturer: Mazak Model: VCS 530C Year: 2012 Condition: (Used) Great Serial Number: 242536 Control: Mazatrol Smart Accessories: 4th Axis, Renishaw Spindle Probe, and Tool probe. Lsdpfez D Euvsx Aklehl MACHINE SPECIFICATIONS Control: Mazatrol Smart X Axis Travel: 1050mm Y Axis Travel: 530mm Z Axis Travel: 510mm Max Workpiece Weight: 1200KG Spindle Speed: 12,000rpm Table Size: 1300 x 550mm Tool Change Capacity: 30 ATC Tool Size: BT40

Condition: excellent (used), Year of construction: 2004, Year 2004 With 8 station Fastem pallet loading system with tombs Tooling & manuals Lhodpozxr Twefx Aklel 12,000rpm 40 ATC DIN40 / Renishaw probing Pallet size 400mm x 400mm

Condition: used, Year of construction: 2017, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 12,000 rpm, for sale is a very well-maintained Mazak VCN 530C vertical machining center with Lehmann 500 Series 4th/5th axis from 2017. This machine impresses with its high precision, reliability and productivity and is ideally suited for single part and series production. CNC Control: Mazatrol Smooth G X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Machine tablesize: 1300 x 550 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40/DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor - Cooling by the spindle 15 bar - Renishaw MP60 - Lehmann 4th/5th axle, type 500-Series, T1-510520. LL-TAP2-M14 with Schunk chuck - Lehmann tailstock, type: RST. LIG-80H If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Lhjdpfszinvcjx Aklsl Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 175118, operating hours: 3,203 h, spindle speed (max.): 12,000 rpm, Mazak FJV-200 (2005) Serial Number: 175118 Through Coolant BT40 Tooling Lhedsv Txplspfx Akljl Mazatrol 640M control 30 Tool magazine 12,000 rpm main spindle full set of manuals This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: good (used), Year of construction: 2005, operating hours: 4,630 h, turning length: 1,585 mm, spindle motor power: 30,000 W, spindle speed (max.): 3,300 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,585 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 2,700 mm, overall weight: 14,500 kg, Multi-tasking lathe MAZAK - INTEGREX 400 III-S MACH-ID 9809 Make: MAZAK Type: INTEGREX 400 III-S Control: MAZATROL 640 MT PRO Ledpfx Aksz Ata Holehl Year: 2005 Only 4630 Cutting hours Automatic door 40 CAPTCO C6-Tool magazin Robot interface 5 Axis simulteneous package Sub spindel with C-Axis and 0,0001 Degree Internal Grundfos 15 Bar coolant Chip conveyor Optional tooling package with 40 holders Max. turning Ø: 850mm X-Axis: 630mm Y-Axis: -115 to + 115mm Z-Axis: 1585mm B Axis: -30 to +195° Spindle bore: 102mm Speedrange: 3300Rpm Spindle power: 30kW Subspindle speeds:3300Rpm Subspindle bore: 102mm Subspindle power: 26kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm B-Axis power: 19kW Chip conveyor: Yes Tool eye: Yes Hours: 4630H Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 1,045 mm, spindle motor power: 18,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 82 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 1,045 mm, total height: 2,900 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,200 kg, Multi-tasking lathe MAZAK - INTEGREX 200-4 S MACH-ID 9810 Make: MAZAK Type: INTEGREX 200-4 S Control: MAZATROL MATRIX Year: 2010 The Mazak INTEGREX 200-IV S is a multi-tasking CNC turning and milling center with a second/sub-spindle. The “S” indicates the sub-spindle, allowing complete machining of both sides of a workpiece in a single setup. Typical specifications include a maximum machining diameter of approximately 660 mm, a machining length of around 995 mm, and X/Y/Z travels of approximately 580 / 160 / 1,045 mm. The machine features a B-axis milling head, a main spindle and sub-spindle up to approximately 5,000 rpm, and a milling spindle typically capable of 12,000 rpm. It normally uses Capto C6 tooling and is often equipped with a 40-position automatic tool changer. Lhodpsz Ar Ucofx Aklsl Machines manufactured around 2006–2010 are commonly equipped with the Mazatrol Matrix CNC control. The INTEGREX 200-IV S is designed for complete machining of complex components, combining turning, milling, drilling, tapping and 5-axis positioning in one machine. This significantly reduces the number of setups and eliminates the need to move components between separate turning and milling machines. Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1045mm B Axis: 225° Spindle bore: 82mm Speedrange: 5000Rpm Spindle power: 18.5kW Subspindle speeds:6000Rpm Subspindle bore: 82mm Subspindle power:18.5kW ATC / revolver: 80 Speed live tools:12.000Rpm Length: 4500mm Width: 2400mm Height: 2900mm Weight: 9200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2007, operating hours: 5,500 h, functionality: fully functional, turning length: 1,545 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, total height: 2,600 mm, total length: 5,200 mm, total width: 2,550 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis 0,001 Degrees 5500 Cutting hours ! The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg Lhodpez Ar R Dofx Aklol Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, number of axes: 4, This 4-axis Mazak FH4800 was manufactured in 2004. It features a maximum spindle speed of 12,000 rpm and impressive travels of 560 mm in the X-axis, 610 mm in the Y-axis, and 560 mm in the Z-axis. The machine is equipped with a 40-position automatic tool changer and includes a Fastems 8-station pallet loading system. If you are looking to get high-quality machining capabilities, consider the Mazak FH4800 horizontal machining centre we have for sale. Contact us for further details. • Indexing: 1° • Machine type/condition: Toolroom machine • Operating hours: Low Additional equipment Lhsdpfoz Ea Hvsx Aklsl • Fastems 8-station pallet loading system (automation) • Renishaw probing system • Tooling included • Manuals included Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 680 mm, spindle motor power: 26,000 W, total height: 2,000 mm, total width: 2,050 mm, overall weight: 6,600 kg, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Mazak QT NEXUS 300 was manufactured in 2009. It features a maximum cutting diameter of 420 mm and a maximum swing of 680 mm. The machine is equipped with a drum turret with 12 stations and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QT NEXUS 300 horizontal turning machine we have for sale. Contact us for further details. • CNC: Mazatrol Fusion 640T Nexus (8.4" color LCD) • CE marked • Capacity • Max bar diameter: 77 mm • Max cutting diameter: 420 mm • Max swing: 680 mm • Spindle bore: 88 mm • Spindle center height: 1,080 mm • Max chuck workpiece weight: 450 kg • Main spindle • Max spindle torque: 600 Nm • Spindle nose: A2-8 • Chuck: 10" through-hole, type B210A815X • Axes • Cutting feedrate: X 8 m/min, Z 8 m/min • Rapid traverse: X 30 m/min, Z 25 m/min • Turret • Type: Drum turret • Stations: 12 • Turning tool shank: 25 × 25 mm • Indexing time: 0.8 s (½ turn), 0.2 s (single step) • Tailstock • Programmable, motor-driven movement • Stroke: 645 mm • Taper: No. 5 • Dead centre included • Live centre: NSK LC-5SW (speed up to 4,000 rpm) • Thrust selection: 10 levels • Control equipment and functions • Mazatrol Fusion 640T Nexus • Interfaces: RS-232C, Network • Background tool-path check • Machining Navigation – Prediction / Monitor / Results Lhsdpfx Asz Eavwjklsl • Velocity and feedrate control • Tool path storage • 3.5" FDD unit • Coolant / machine equipment • Complete coolant system (tank 210 L, pump 520 W) • Preparation for side chip conveyor • Automatic tool eye • Hydraulic chuck pressure interlock • Chuck open/close confirmation • Double foot switch • Full chip and coolant guarding • Work light • Electrical • Power requirement (30 min rating): 49.69 kVA • Continuous power requirement: 43.83 kVA Additional equipment • European-market power transformer • Foundation plates • One set of adjusting tools • Manuals included Technical Specification Driven Tools No Counter Spindle No

Condition: ready for operation (used), Year of construction: 1998, operating hours: 116,213 h, travel distance X-axis: 245 mm, travel distance Z-axis: 1,035 mm, controller manufacturer: MAZATROL, controller model: T-Plus, number of axes: 3, This 3-axis Mazak SQT-30M * 1000 turn-mill centre was manufactured in 1998. It features a maximum turning diameter of 410 mm and a turning length of 989 mm. The machine is equipped with a Mazatrol T-Plus control system and offers a spindle speed range of 35 - 3,300 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak SQT-30M * 1000 machine we have for sale. Contact us for further details. - Working Hours: 116,213 hours- Max. Swing Diameter: 560 mm- Max. Swing Over Carriage: 500 mm- Max. Turning Diameter: 410 mm- Standard Turning Diameter: 336 mm- Max. Turning Length: 989 mm- Max. Bar Capacity (Diameter): 77 mm- Main Spindle Speed Range: 35 - 3,300 rpm- Main Spindle Motor Power: 26 kW / 22 kW (30 min / 100% continuous)- Max. Spindle Torque: 637 Nm- Spindle Nose: A2-8"- Spindle Through-Hole: 88 mm- Chuck Diameter: 304 mm- C-Axis Indexing: 0° - 360° / 0.001°- Turret Positions: 12- Turning Tool Shank Size: 25 x 25 x 150 mm- Boring Bar Shank Diameter Range: 8 / 10 / 12 / 16 / 25 / 32 / 40 / 50 mm- Turret Indexing Time: approx. 2.2 s- Driven Tools Motor Power: 7.5 kW- Driven Tools Max. Torque: 96 Nm- Driven Tools Speed Range: 90 - 1,500 rpm- Driven Tools Drilling Capacity: 23 mm- Driven Tools Tapping Capacity: M16 (H-type holder) / M12 (V-type holder)- Driven Tools End Milling Capacity: 25 mm- X-Axis Travel: 245 mm- Z-Axis Travel: 1,035 mm- X-Axis Rapid Traverse: 18 m/min- Z-Axis Rapid Traverse: 24 m/min- C-Axis Rapid Traverse: 100 rpm- X/Z-Axis Feed Rate: 0 - 5,000 mm/min- C-Axis Feed Rate: 1° - 2,000°/min- Tailstock Quill Stroke: 130 mm- Tailstock Quill Diameter: 100 mm- Tailstock Taper: MK 4- Tailstock Travel: 880 mm- Coolant Tank Capacity: 250 l- Coolant Pump Flow Rate: approx. 20 l/min- Coolant Pump Pressure: 5 bar- Power Capacity: 52 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 100 l/min- Required Floor Space: approx. 7.7 m²- Machine Weight: approx. 9,500 kg- Additional Equipment & Accessories: Tool Eye (tool presetter), 3-jaw hydraulic chuck 304 mm with soft/hard jaws, chip/coolant guard enclosure, work light, synchronized tapping, driven tool holders (CAT40 3x vertical, 3x horizontal), boring bar holders, set of adjusting tools, foundation equipment Technical Specification Counter Spindle No Driven Tools Yes Lhsdjz D Dfgspfx Aklsl

Condition: used, Year of construction: 2017, operating hours: 38,141 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: Mazatrol, controller model: Smooth G, total height: 2,810 mm, total length: 3,650 mm, total width: 3,100 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 6,800 kg, spindle speed (min.): 12,000 rpm, spindle speed (max.): 35 rpm, operating hours of spindle: 8,074 h, coolant supply: 30 bar, number of slots in tool magazine: 30, input voltage: 19 V, Equipment: chip conveyor, documentation/manual, CNC Vertical Machining Centre CNC Control: Mazatrol Smooth G Machine tablesize: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Spindle speed: 35 - 12.000 rpm Spindle: SK40/DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 Lhedpfx Aezy Nxgjkljl and equipped, among other things, with - Chip conveyor belt right - Cooling by the spindle 15 bar - Spindle total time 8.074 hours If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2012, functionality: fully functional, Control system: Matrix II Travel ranges: X-axis 207 mm X2-axis 141 mm Lhjdpfez Dtmgex Aklsl Y-axis 100 mm Y2-axis 70 mm Z-axis 760 mm Z2-axis 815 mm Main spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Spindle nose A2-6 Counter spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Spindle nose A2-6 Tool turret: Number of tool positions 24 Max. speed of driven tools 6,000 rpm Tool stations 24 Driven tool stations 24 2 pcs. 12-position turret Max. turning diameter: Max. turning diameter (upper turret) 344 mm Max. turning diameter (lower turret) 210 mm Max. swing diameter: Max. swing diameter (upper turret) 370 mm Max. swing diameter (lower turret) 320 mm Additional equipment: Bar feeder LNS Robot interface Automatic door Tool setter on the right and left Chip conveyor, discharge to the right Separate coolant system 15 bar high-pressure pumps Coolant temperature control

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,321 h, travel distance X-axis: 560 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 640 mm, controller manufacturer: MAZATROL, controller model: SmoothG, spindle speed (max.): 18,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control, through-spindle cooling at 32 bar, and a Renishaw OMP 60 touch probe. With a spindle speed of up to 18,000 rpm and a tool magazine capacity of 60, it's ideal for precise and efficient machining. Consider the opportunity to buy this Mazak HCN 4000 horizontal machining centre. Contact us for more information about this machine. • Table: Pallet size 400 x 400 mm; Number of pallets 2; Indexing 1° increments • Control: Mazatrol SmoothG • Coolant/air: Through-spindle cooling 32 bar; Through-spindle air supply; Niagara flushing • Functions: Tapping without compensating chuck (rigid tapping); G00 tilt function • Compliance: CE marking Additional equipment Lhedox Enllspfx Aklol • Renishaw OMP 60 touch probe • Renishaw Inspection+ (Version 2022) • Tool length measurement system • Tool ID system • Chip conveyor • Additional filter cartridges Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2005, Serial Number 177554 YOM 2005 Mazatrol 640m Control EIA & Mazatrol Programming 30 Tool Magazine CAT Tooling 4th Axis Lodpfozilp Tex Aklshl Swarf Conveyor Mazak Tool length measuring unit Spindle thru coolant UK Buyers - Price £42,000 +VAT Carriage/delivery is additional