Used Mori Seiki Nz 1500 for sale (198)

Condition: used, Year of construction: 2008, turning diameter max. 320 mm turning length 810 mm control MSX 701 MAPPS III standard turning dia. 200 mm Main spindle: Number of revolutions max. 6.000 min/-1 power capacity - main spindel 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Iaodstqmqwopfx Ag Uol Subspindel: Number of revolutions max. 6.000 min/-1 power capacity - Sub spindle 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Turret 1 + 3: number of toolpositions je 16 pos. Number of driven toolspositions je 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+65 / -45) mm Turret 2: number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+45 / -65) mm axis stroke: x-travel 1-3: 210 mm y-travel 1-3: 110 mm z-travel 1+3: 300 / 2: 810 mm total power requirement 90 kVA weight of the machine ca. 9,3 t dimensions of the machine ca. 4,5 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T3Y3 - Main- and Subspindle - 3 turrets, 2x upper / 1x below - 3x Y-Axis - 3x 16-pos. tool-drive - incl. 28x collets - incl. Hainbuch changing device

Condition: good (used), Year of construction: 2007, CNC Turning and Milling Center Machine type: Mori Seiki NZ-S 1500 / 1000 Control: Fanuc MSC-701 Year of manufacture: 2007 TECHNICAL DATA: Max. turning length: 1,055 mm Turning diameter: 120 mm Max. swing over bed: 285 mm Rapid traverse (X/Z): 20 m/min Main spindle Max. speed: 3,500 rpm Drive power: 7.5 / 5.5 kW Bar capacity: 43 mm Spindle nose: A2-6 Number of turrets: 2 Tool stations: 6 + 6 Tool interface: Capto Tailstock Quill diameter: 85 mm Quill taper: MK 4 Quill stroke: 70 mm Tailstock traverse: 520 mm Steady rest: hydraulic Steady rest: SMW SLU-1-Z Equipment features: Iajdpjwxahfsfx Ag Usl Chip conveyor Coolant pump Tool measurement system

Condition: used, Year of construction: 2010, turning diameter max. 320 mm turning length 810 mm control MSX 701 Number of revolutions max. 6.000 U/min power capacity - main spindel 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm Number of revolutions max. 6.000 U/min power capacity - Sub spindle 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm b-axis 900 mm total power requirement 86 kVA weight of the machine ca. 8,1 t dimensions of the machine ca. 8,0 x 3,5 x 2,8 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions Iasdpfxsv E R E Ao Ag Uel

Condition: used, Year of construction: 2020, Mori Seiki NTX2000/1500 2nd Gen Mill/Turn with Celos/F31iB5 Control, Max Swing of Workpiece 700mm, Max Swing over Cross-Slide 700mm, Max Distance Between Centres 1842mm, Max Turn Length 1538mm, Main Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Sub-Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Milling Spindle Capto C6 at 12,000rpm, 76 Position ATC, 12 Station Turret, Hydrajet MS30-1000-70 Bar High Pressure Coolant, Machine Dimensions (LxWxH) 6205 x 2830 x 2750mm, Machine Weight 18,950kgs. S/No. NTX23200821 (2020) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Iaodpfx Ajx E Ubmeg Uel

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 56 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 460 mm, rapid traverse Z-axis: 80 m/min, rotational speed (max.): 12,000 rpm, overall weight: 10,500 kg, fuel: electricity, number of slots in tool magazine: 40, Mori Seiki MT 1500 SX 9-axis milling and turning center, manufactured in 2006, with Fanuc Series 18iB (MSX-501) control, maximum chuck length of 920mm, maximum diameter of 400mm, bore size of 65 mm, 4000 and 6000 rpm spindle rotation, and 12,000 rpm milling spindle. 12-position turret with live tools, Y axis, B axis +/- 120, C axis 0.001, ATC 40 tools, and chip extractor. In excellent working condition and can be seen working in Portugal. Iaedpfx Agjh Elp Ej Uol

Condition: excellent (used), With Sub-spindle Iasdpfxex I A Aws Ag Ujl With C-axis, with Y-axis With driven tools FANUC/MORI MSX 501 control Turning diameter max 190 mm Turning length -235 mm Spindle speeds 50-5'000 rpm Top turret tool holders 1+2 with 16 driven positions Bar loader FMB Turbo 8-80 Workpiece pick-up device Tool presetting device Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, turning length: 1,540 mm, travel distance X-axis: 495 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,560 mm, swing diameter over bed slide: 660 mm, controller model: MSX-711 (MAPPS IV), Partially overhauled machine with only approximately 3,000 spindle hours! TECHNICAL DETAILS Turning length: 1,540 mm Max. turning diameter: 610 mm (Turret 2: 274 mm) Swing diameter over bed: 660 mm Swing diameter over cross slide: 660 mm (Turret 2: 300 mm) Turning/Milling Spindle X-axis travel: 495 mm Y-axis travel: 125 mm Z-axis travel: 1,560 mm B-axis: 120 degrees Spindle speed: 12,000 rpm Drive power: 18.5/11 kW (10 min./continuous operation) Tool Magazine Magazine positions: 76 Tool holder: Capto C6 Lower Turret Number of tool stations: 10 Tool change time: 0.19 s Main Spindle Spindle speed: 5,000 rpm Ijdpex An Uxjfx Ag Ueal Main spindle drive power: 22/18.5 kW (30 min./continuous operation) Sub Spindle Spindle speed: 5,000 rpm Sub spindle drive power: 22/18.5 kW (30 min./continuous operation) MACHINE DETAILS Control system: MSX-711 (MAPPS IV) Operating hours Spindle hours: 3,006 h Operating hours: 4,526 h EQUIPMENT Spindle 2 with tailstock option Electronic handwheel Interface for high-pressure coolant system Chip conveyor Air nozzle for chuck and tool tip Automatic tool measurement system for upper and lower positions Bar feeder interface Hobbing function

Condition: used, Year of construction: 2011, turning diameter max. 320 mm turning length max. 810 mm control MSX-701 IV greates pass round over bed 800 mm Swing dia. over traverse guideway 800 mm distance between spindles 1.130 mm Number of revolutions max. 5.000 rpm power capacity - main spindel 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° Iaodpfx Agev E R E Nj Ujl spindle nose JIS A2-6 collet chuck 160 mm Number of revolutions max. 5.000 rpm power capacity - Sub spindle 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm Traverses Subspindle B: 870 mm rapid traverse ( X / Y / Z ) 1: 30 / 20 / 50 m/min rapid traverse ( X / Y / Z ) 2: 30 / - / 50 m/min Tipp feed 0 - 5.000 mm/min total power requirement 94 kVA weight of the machine ca. 8,3 t dimensions of the machine ca. 10,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: used, Year of construction: 2020, Technical details: turning diameter: 670 mm Iodpfswl Ag Dox Ag Uoal turning length: 1540 mm control: F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover: 700 mm Travel turret No.1 (milling spindle) x/y/z: 495 / ± 150 / 1562(+164) mm Rotation B-axis: -30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/40/40 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 20,2/18,8 kW Torque of milling spindle: 120 / 44 Nm tool taper milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool/tool, milling spindle: 1,25 s Spindle 1 RPM: 3000 1/min Spindle 1 Power: 36 / 30 / 25 kW C-axis spindle 1: 0,001 ° Bar capacity spindle 1: 102 mm Spindle 2 RPM: 4000 1/min Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0,001 ° Bar capacity spindle 2: 80 mm dimensions of the machine ca.: 7,8 x 3,6 x 2,9 m Linear scales on axis: X, Y programmable steady: KLU-A530 & SLU-X3.2 Accerories Chip conveyor tool setting spindle load monitor Airblow system Airblow system internal to cutting tool Spindle 1 Chuck Kitagawa 250 (B 210) mm Spindle 2 Chuck Kitagawa 250 (B 210) mm Interface for coolant through the spindle 70 bar Tailstock specification for spindle 2 Measuring probe for work piece Renishaw OMP60 pendant hand wheel Parts and total counter Signal lamp 3 colors Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear window Quick fixed cycles Program restart Signal lamp 4 colours Ethernet I/P Interface manual tool eye Automatic door Air Filter Oil skimmer Tactile sensor for workpiece measuring Airblow system external Subspindel Spindle 1 coolant jet Spindle 2 coolant jet Coolant Gun Coolant through spindle 70 bar with filter Knoll High performance turning and milling center with multi axis milling head, 76 tool magazine Capto C6, main- and sub spindle, which can act as tailstock. It has automatic door and Matris robot R-2000iC/165F. *

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,000 h, functionality: fully functional, turning length: 750 mm, turning diameter over cross slide: 250 mm, travel distance X-axis: 140 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 410 mm, TECHNICAL DETAILS Axis Travel X-axis travel: 140 mm Y-axis travel: +/- 40 mm Z-axis travel (1+2): 450 / 410 mm Turning Capacity Turning length: 750 mm Swing diameter over cross slide: 250 mm Turning diameter: 190 mm Distance between centers: 750 mm Maximum bar diameter: 52 mm Spindle Spindle speed (max.): 4,000 rpm Spindle bore: 91 mm Iaedpoxgglksfx Ag Usl Spindle bearing diameter: 95 mm Main spindle speed range: 60 - 6,000 rpm Main spindle drive power: 22 / 18.5 kW Maximum torque: 198 Nm Sub-spindle (B-axis) travel: 525 mm Feeds Feed rate X (1+2): 18,000 mm/min Feed rate Y: 6,000 mm/min Feed rate Z (1+2): 24,000 mm/min Feed rate B: 24,000 mm/min Turret Number of turrets: 2 Number of tool stations: 2 x 16 positions Square shank height: 20 mm Drill shank diameter: 25 mm Turret indexing time: 0.2 s Toolholder: VDI 30 Speed range - driven tool stations (max.): 6,000 rpm Drive power - driven tool stations: 5.5 / 3.7 / 2.2 kW Rapid Traverse Rapid traverse X (1+2): 18 m/min Rapid traverse Y: 6 m/min Rapid traverse Z (1+2): 24 m/min Rapid traverse B: 24 m/min Rapid traverse C: 400 rpm MACHINE DETAILS Control: MSX 501 Dimensions & Weight Dimensions: 6500 x 3000 x 2500 mm Machine weight: approx. 5.1 t Total power requirement: 73.9 kVA Operating hours: 5,000 h EQUIPMENT LNS bar feeder

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Iedpfxowlvlgo Ag Ueal Year of manufacturing: 2010

Condition: used, Year of construction: 2013, Mori Seiki NTX2000/1500SZM 5-Axis Mill/Turn with F31iB5 Control, Main Spindle Kitagawa 10”dia Chuck at 4,000rpm, Sub-Spindle Kitagawa 10”dia Chuck, 76 Position ATC, 10 Station Indexing Turret, Spindle Taper Capto C6, SMW SLU 3.2 Hydraulic Steady, High Pressure Coolant, Swarf Conveyor. S/No. NTX20130611 (2013) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Iodpfxsx R Uc Uj Ag Uoal

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Isdpex Uxdqsfx Ag Uoal Collets package

Condition: ready for operation (used), Year of construction: 2007, turning length: 515 mm, turning diameter: 366 mm, spindle speed (min.): 6,000 rpm, overall weight: 5,400 kg, CNC Mitsubishi MSX850/3 C-axis, 160 mm chuck 5 driven tools, max speed 10,000 rpm 16-position turret Ijdpox Ttwvjfx Ag Ujal capacity 515x386 mm chip conveyor

Condition: used, Year of construction: 2010, Rotating diameter turret 1 370 mm Rotating diameter turret 2 260 mm max. turning length 600 mm spindle tunring speed 5.000 U/min spindle bore 73 mm control MSX-853N no. of tools in turret 1 12 Iedsx Iwgwspfx Ag Ueal no. of tools in turret 2 8 auto power on hours ca. 36.270 h Spindle hours head 1 ca. 19.600 h Spindle hours head 2 ca. 18.402 h Installation area (excluding chip conveyor) 2.940 x 2.100 mm Total height 2.300 mm weight approx. ca. 7.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Driven tools Accessories, tools shown, and clamping devices are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 8300 kg Main Drive Number of spindles 2 Spindle speed range 5000 Spindle motor power 22 kW Number of axis 9 Additional Equipment Automatic Conversational Programming System: Mapps 4 Automatic Effort Control and Tool Consumption Monitoring Oil Cooler for Both Spindles Double Pedal for Chuck Opening and Closing Interface for Bar Feeder Installation Automatic Rear Part Catcher (Special Clamp for Long Parts) Side Chip Conveyor (Hinged Type) Iajdpjx D R Iksfx Ag Ujl Communication Ports: USB, PCMCIA Card, RS-232 Includes Electrical Transformer, Documentation, Parts List, Electrical Schematics, Programming, and Operation Manual This 9-axis MORI SEIKI NZ2000 was manufactured in 2008, offering advanced capabilities for precision horizontal turning. Ideal for complex machining tasks, this machine ensures efficient production with its multi-axis configuration. Consider the opportunity to buy this MORI SEIKI NZ2000 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2006, operating hours: 7,562 h, turning length: 515 mm, turning diameter: 366 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 2,705 mm, total width: 2,000 mm, overall weight: 5,500 kg, CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Iaodpfx Ageu T H Dxo Ujl Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Interface for Bar feeder Bar loader IEMCA MASTER 880/MP 33 LL Working time hours Potencial nominal kVA: 27.4 Basic machine dimensions / weight Length mm: 2.705 Width mm: 2.000 Height mm: 2.120 Weight kg: 5.500

Condition: used, Year of construction: 2012, Mori Seiki NTX2000/1500SZ 5-Axis Mill/Turn with MAPPS/F31iB5 Control, Max Workpiece Swing Diameter 660mm, Max Swing Over Cross Slide 660mm, Max Turning Diameter 610mm, Max Turning Length 1540mm, Bar Work Capacity 65mm, Travel X/Y/Z/X2/Z2 = 495/250/1560/160/1402mm, Main Spindle Kitagawa 8”dia Chuck at 5,000rpm, Sub-Spindle Kitagawa 8”dia Chuck at 5000rpm, 76 Position ATC, Spindle Taper Capto C6 at 12,000rpm, High-Pressure Coolant, 10 Station Indexing Turret, Swarf Conveyor, Machine Weight 15,000kgs, Floor Space (LxWxH) 4076 x 2890 x 2626mm (2012) Isdpfxsx Hxk Uo Ag Ujal Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 52 [mm] - Max. turning diameter : 350 [mm] - Max. diameter on bench : 923 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260/590 [mm] TAILSTOCK - Tailstock type : Numérique - Tailstock stroke : 564 [mm] - Distance between centers : 694 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 19 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2460 x 2000 [mm] - Machine height : 2185 [mm] - Machine weight : 5300 [kg] EQUIPMENT Iodpfx Agouhb Tde Usal - CNC : MORI MSX-850 III (Mitsubishi) - Coolant tank - Chips conveyor - Spindle cooling unit - Tool probe - Electric transformer

Year of construction: 2008, condition: refurbished (used), Oscillating base: 800mm Oscillating cross slide: 800mm Iedpfx Asxuguuog Ujal Maximum distance between large spindle noses: 1,130mm Maximum machining diameter: 320mm Maximum turning length: 810mm Bar machining capacity: 52mm X1, X2 axis: 210mm Y1 axis: 110mm (+65, -45) Y2 axis: 110mm (+45, -65) Z1, Z2 Axis: 810mm B-axis (spindle 2): 920mm CNC control: MSX-701 III Spindle 1, 2 Max. spindle speed 1, 2: 6,000 1/min Spindle nose 1, 2: JIS A2-5 Bore diameter through spindle 1, 2: 61mm Turret type: 16 stations x 2 Max. tool spindle speed motorised: 6,000 1/min Speed x1, x2: 30,000 Speed y1: 20,000 Speed z1, z2: 50,000

Condition: used, Year of construction: 2004, MORI SEIKI MT 2000 SZ TURN MILL CENTRE MAKE MORI SEIKI MODEL MT 2000 YEAR 2004 CONTROL MSG 501 SWING OVER CROSS SLIDE 599.5 mm SWING 749.0 mm CHUCK SIZE 250.0 mm DISTANCE BETWEEN CENTRE 1280.0 mm MAX. CUTTING DIAMETER 548.6 mm MAX. CUTTING LENGTH 1018.0 mm BAR CAPACITY 63.5 mm C AXIS 0.001 DEGREE SPINDLE RANGE 4500 rpm SPINDLE MOTOR 20 hp SPINDLE NOSE A2-6 SUB SPINDLE BAR CAPACITY 43.18 mm SUB SPINDLE MOTOR 10 hp SUB SPINDLE SPEED 6000 RPM TOOL CHANGE CAPACITY 60 STATION TURRET 12 STATIONS TRAVEL B AXIS +/- 120 DEGREE Y AXIS +/- 78.7 MM PLUS Iodpfjuq Iwpsx Ag Ujal CNC BARFEED PART CONVAYOR TOOL SETTING PROBE Y AXIS HIGH PRESSURE SWARF CONVAYOR FULL SET OF MANUALS GOOD RANGE TOOLING

Condition: used, Year of construction: 2011, Mori Seiki NMV5000 DCG 5-Axis Machining Centre with F31iA5 Control, Spindle Taper BT40, Max Spindle Speed 12,000rpm (22/18.5kW), 61 Position ATC, Hydrajet WP10-1000 High Pressure Through Spindle Coolant. S/No. NM501JK0592 (2011) Iajdpex Syf Rsfx Ag Uol Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2013, Mori Seiki NVX5100-II/40 Vertical Machining Centre with MAPPS IV/M730BM Control, Travel X/Y/Z = 1050/530/510mm, Table Size 1350 x 600mm x 1200kgs, Spindle Taper BT40, 30 Position ATC, Max Spindle Speed 13,000rpm, High-Pressure Through Spindle Coolant, Swarf Conveyor, Machine Weight 7,000kgs, Floor Space (L x W x H) 3084 x 2851 x 2597mm. S/No. NV502130614 (2013) Ijdpfxsx Syfkj Ag Ujal Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2012, Mori Seiki NLX2500SY/700 Turning Centre with MAPPS IV/M730BM Control, Swing Over Bed 920mm, Max Swing Over Cross Slide 742mm, Max Turning Length 705mm, Main Spindle Kitagawa 10” dia Chuck at 4000rpm, Sub-Spindle Kitagawa 6” dia Chuck at 6000rpm, 12 Station Turret, High Pressure Coolant, Bar Feed Interface, Swarf Conveyor, Machine Weight 6,360kgs, Floor Space (L x W x H). S/No. NL254120730 (2012) Ijdpfx Agex Sydgo Usal Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described Auction 3444 - Ends on 22/01/2026 at 3pm (UK Time) Visit our website for more details...

Condition: used, Year of construction: 2013, Mori Seiki NLX2500SY/700 Turning Centre with MAPPS IV/M730BM Control, Swing Over Bed 920mm, Max Swing Over Cross Slide 742mm, Max Turning Length 705mm, Main Spindle Kitagawa 10” dia Chuck at 4000rpm, Sub-Spindle Kitagawa 6” dia Chuck at 6000rpm, 12 Station Turret, High Pressure Coolant, Bar Feed Interface, Swarf Conveyor, Machine Weight 6,360kgs, Floor Space (L x W x H). S/No. NL254130936 (2013) Ijdpfx Agsx Syahs Uoal Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.