Used Mori Seiki Mv Junior for sale (196)

Condition: ready for operation (used), Vertical machining center, Mori Seiki MV-Junior Iajdpfxex I D Sye Ag Uel

Condition: like new (used), Year of construction: 1985, Parts shown by hand not come. 4 axis not come with machine. Iaodpfxsgw Shrs Ag Usl

Condition: ready for operation (used), Year of construction: 2000, Immediately available from site: CNC Vertical Machining Center Mori Seiki Model MV 653/50 Year of manufacture: 2000 CNC control: Fanuc MSG 501 Table: 1700 x 660 mm Table load capacity: 2 t Travel (X/Y/Z): 1530 / 660/ 650 mm Distance spindle – table: 200 – 850 mm Distance spindle – column: 690 mm Taper: SK 50 Spindle speeds up to 6,000 rpm Main spindle drive: 26/22 kW Tool changer: 40 positions Iaodox Tq Hbopfx Ag Usl Through-spindle coolant (IKZ) Feeds: 1 – 10,000 mm/min Rapid traverse: 24 m/min Creep feed: 0 – 1,260 mm/min Total connected load: 52.5 kVA Chip conveyor Weight: 16 t Price: EUR 6,000.00 plus VAT, ex site

Condition: used, Year of construction: 1986, Technical details: x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm total power requirement: 20 kW weight of the machine ca.: 8 t Vertical Processing Centre 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough. * Isdpowvblaefx Ag Uoal

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 836, • Control system: FANUC MSC-500 • Axis travel: • X-axis: 560 mm • Y-axis: 410 mm • Z-axis: 460 mm • Table dimensions: 900 × 450 mm • Maximum table load: 700 kg • Spindle taper: CAT 40 • Maximum spindle speed: 8,000 rpm • Spindle motor power: 7.5 kW • Number of tool positions in the magazine: 20 • Rapid traverse: • X and Y axes: 20 m/min • Z-axis: 15 m/min • Total machine power: 30 kW Iodpfx Agov U Ende Ujal • Machine weight: approximately 5,000 kg • Machine dimensions (l × w × h): 2.48 × 2.25 × 2.8 m

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 6675 1727 J, travel distance X-axis: 800 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, TECHNICAL DETAILS Travel paths x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm General information Iodpjwm I Nyofx Ag Uoal Machine weight: approx. 8 t

Condition: used, Year of construction: 2011, Mori Seiki NMV5000 DCG 5-Axis Machining Centre with F31iA5 Control, Spindle Taper BT40, Max Spindle Speed 12,000rpm (22/18.5kW), 61 Position ATC, Hydrajet WP10-1000 High Pressure Through Spindle Coolant. S/No. NM501JK0592 (2011) Iajdpfsx Syf Rsx Ag Uel Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 300 kg, spindle speed (max.): 12,000 rpm, The machine spindle was recently replaced. The corresponding report can be provided upon request. TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 40 m/min Table width: 500 mm Table height: 870 mm Table length: 500 mm Table load capacity: 300 kg Rotary table diameter: 500 mm Rotational speed (max.): 1,200 rpm Spindle speed (max.): 12,000 rpm Spindle interface: HSK-A63 Workpiece height (max.): 450 mm Workpiece weight (max.): 300 kg Tool length: 300 mm Tool diameter: 125 mm Tool weight: 8,000 g Number of tool magazine slots: 180 MACHINE DETAILS Control unit: Siemens 840 D Iodpsx Exvzjfx Ag Ujal Total weight: 14,800 kg Incoming voltage: 400 V EQUIPMENT Mori Seiki tool application manual KNOLL FKA/500 band filter system + 3 filter rolls Filtermist FX5000 emulsion extraction unit Renishaw OMP60 3D probe Chip conveyor Spindle chiller Documentation + circuit diagrams

Condition: used, Year of construction: 2004, MORI SEIKI MT 2000 SZ TURN MILL CENTRE MAKE MORI SEIKI MODEL MT 2000 YEAR 2004 CONTROL MSG 501 SWING OVER CROSS SLIDE 599.5 mm SWING 749.0 mm CHUCK SIZE 250.0 mm DISTANCE BETWEEN CENTRE 1280.0 mm MAX. CUTTING DIAMETER 548.6 mm MAX. CUTTING LENGTH 1018.0 mm BAR CAPACITY 63.5 mm C AXIS 0.001 DEGREE SPINDLE RANGE 4500 rpm SPINDLE MOTOR 20 hp SPINDLE NOSE A2-6 Isdsuq Iwpopfx Ag Ujal SUB SPINDLE BAR CAPACITY 43.18 mm SUB SPINDLE MOTOR 10 hp SUB SPINDLE SPEED 6000 RPM TOOL CHANGE CAPACITY 60 STATION TURRET 12 STATIONS TRAVEL B AXIS +/- 120 DEGREE Y AXIS +/- 78.7 MM PLUS CNC BARFEED PART CONVAYOR TOOL SETTING PROBE Y AXIS HIGH PRESSURE SWARF CONVAYOR FULL SET OF MANUALS GOOD RANGE TOOLING

Condition: used, Year of construction: 2013, Mori Seiki NVX5100-II/40 Vertical Machining Centre with MAPPS IV/M730BM Control, Travel X/Y/Z = 1050/530/510mm, Table Size 1350 x 600mm x 1200kgs, Spindle Taper BT40, 30 Position ATC, Max Spindle Speed 13,000rpm, High-Pressure Through Spindle Coolant, Swarf Conveyor, Machine Weight 7,000kgs, Floor Space (L x W x H) 3084 x 2851 x 2597mm. S/No. NV502130614 (2013) Iasdpjx Syfksfx Ag Ujl Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: like new (used), Year of construction: 1999, functionality: fully functional, MORI SEIKI SL-600B/2000 CNC LATHE Category: CNC Turning Centers Reference No.: 400212 Capacity: Ø900 X 2000 MM Year of Construction: 1999 Technical Specification: CNC Control : Fanuc 18iT WORKING CAPACITY Max Turning Diameter : 900 mm Max Turning Length : 2000 mm Swing over bed : 994 mm Distance Between Centers : 2300 mm Swing over cross slide : 733 mm Travels (X) : 485 mm (440 + 45) mm Travels (Z) : 2150 mm TURRET Iasdpsx Nv Shefx Ag Uel Turret : 12 Station Square tool shank size : 32 mm Boring bar shank diameter : 65 mm TAILSTOCK Tailstock : MT5 Tailstock Quill Travel : 150 mm Tailstock Quill Dia : 150 mm SPINDLE Max Rotation Speed : 1500 RPM Main Spindle Nose : JIS A2-15 Main Spindle Bore : 185 mm Spindle Type : 3 Step Gearbox Spindle bearing inner diameter : 260 mm MACHINE DIMENSIONS Weight : 16T Additional Details: All Specifications are found online, and subject to verification by buyer.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Iaedpfx Aex Uxdqeg Uol Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 3 Iaodpex D H T Aefx Ag Uol Spindle Speed 12000 RPM Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A robust twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Additional attributes include a 1-degree indexing table and a chip conveyor. If you are looking to get high-quality machining capabilities consider the MORI SEIKI SH400 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2009, CNC controller: M720BM Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 (100) Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 356 Swing over bed mm: ø 923,8 Swing over cross-slide mm: 755 Bar work capacity mm: 80 C-axis degree: 0,001° Upper turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 6.000 Drive power driven tools kW: 5,5/3,7 (3 min/cont) Indexing time s: 0,25 Iasdpexcqz Ijfx Ag Uel Main spindle Speed ​​spindle rpm: 4.000 Drive power spindle kW: 18,5/15 (25% ED/cont) Spindle bore mm: ø91 Tailstock Tailstock travel mm: 734 Holder: MT5 Equipment Chip conveyor Tool measuring arm

Condition: excellent (used), Year of construction: 2013, swing over cross-slide 360mm, Maximum cutting diameter 366mm, Maximum cutting length 705mm, Bar capacity 80mm, Spindle speed 4,000rpm, milling speed 10,000rpm, Main spindle power 18.5Kw, C axis 0.001 degrees, Y axis -/+ 50mm, 12 station turret. Iajdox Eituopfx Ag Ujl Mori Control M730BM, equipped with Toolsetter, swarf conveyor, 3 jaw chuck, Parts catcher, barfeed unit

Condition: used, Year of construction: 2012, Mori Seiki NLX2500SY/700 Turning Centre with MAPPS IV/M730BM Control, Swing Over Bed 920mm, Max Swing Over Cross Slide 742mm, Max Turning Length 705mm, Main Spindle Kitagawa 10” dia Chuck at 4000rpm, Sub-Spindle Kitagawa 6” dia Chuck at 6000rpm, 12 Station Turret, High Pressure Coolant, Bar Feed Interface, Swarf Conveyor, Machine Weight 6,360kgs, Floor Space (L x W x H). S/No. NL254120730 (2012) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described Auction 3444 - Ends on 22/01/2026 at 3pm (UK Time) Visit our website for more details... Iodpfox Sydgox Ag Uoal

Condition: ready for operation (used), Year of construction: 2007, turning length: 515 mm, turning diameter: 366 mm, spindle speed (min.): 6,000 rpm, overall weight: 5,400 kg, CNC Mitsubishi MSX850/3 C-axis, 160 mm chuck 5 driven tools, max speed 10,000 rpm 16-position turret Iajdpfsx Ttwvox Ag Ujl capacity 515x386 mm chip conveyor

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 4 Spindle Speed 12000 RPM Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm Iasdpfsx D H Uasx Ag Usl This 4-axis MORI SEIKI SH400 was manufactured in 1998. A twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Noteworthy are the through-spindle coolant and chip conveyor. Ideal for automated 4-axis machining, though it requires a new X-axis drive and is currently non-operational. Consider the opportunity to buy this MORI SEIKI SH400 horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2013, Mori Seiki NLX2500SY/700 Turning Centre with MAPPS IV/M730BM Control, Swing Over Bed 920mm, Max Swing Over Cross Slide 742mm, Max Turning Length 705mm, Main Spindle Kitagawa 10” dia Chuck at 4000rpm, Sub-Spindle Kitagawa 6” dia Chuck at 6000rpm, 12 Station Turret, High Pressure Coolant, Bar Feed Interface, Swarf Conveyor, Machine Weight 6,360kgs, Floor Space (L x W x H). S/No. NL254130936 (2013) Iodpfx Agjx Syahj Ueal Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 4,000 rpm, spindle motor power: 18,000 W, overall weight: 5,800 kg, controller manufacturer: FANUC, number of axes: 5, This 5-axis MORI SEIKI NL 2500 SY was manufactured in 2007, featuring a sub-spindle and a 12-station motorized turret. It includes main and sub-chucks of 250 mm and 210 mm, respectively, and a bar capacity of 80 mm. The machine offers a spindle speed of 4,000 rpm and a tool speed of 6,000 rpm. Consider the opportunity to buy this MORI SEIKI NL 2500 SY horizontal machine centre. Contact us for more information about this machine. Ijdpeyaiqkjfx Ag Ueal Additional equipment • Renishaw tool measurement arms (2) • Communication: USB, PCMCIA, RS-232 • Bar feeder interface • Automatic parts catcher • Independent chuck pedals • Chip extractor: hinged lateral Machine Benefits Technical Machine Benefits • Sub-spindle motor: 15 kw • Tool motor: 5. 5 kw (torque 640 nm) • Tool speed: 6000 rpm • Turret index: 0. 2 sec • 12-station motorized turret • Oil cooler: daikin • C-axis: both spindles Extra Information Machine still under power

Condition: used, Year of construction: 2013, Mori Seiki NTX2000/1500SZM 5-Axis Mill/Turn with F31iB5 Control, Main Spindle Kitagawa 10”dia Chuck at 4,000rpm, Sub-Spindle Kitagawa 10”dia Chuck, 76 Position ATC, 10 Station Indexing Turret, Spindle Taper Capto C6, SMW SLU 3.2 Hydraulic Steady, High Pressure Coolant, Swarf Conveyor. S/No. NTX20130611 (2013) Iasdpfx Aox R Uc Ueg Ujl Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, This 4-axis DMG Mori Seiki NVX-5100 II was manufactured in 2013. It features a Fanuc control unit, a table size of 1350 x 600 mm, and a maximum table load of 1100 kg. The spindle operates at 12,000 rpm with a motor power of 15 kW. It includes a 60-tool magazine, rapid traverse speed of 30,000 mm/min, and a Daikin oil cooler. Consider the opportunity to buy this DMG Mori Seiki NVX-5100 II vertical machining centre. Contact us for more information. Iajdpfx Aoyaipyog Usl Machine Benefits Technical Machine Benefits • Spindle speed: 12000 rpm / spindle motor power: 15 kw • Rapid traverse speed: 30000 mm/min • Max load on table: 1100 kg • Dimensions: 1350 x 600 mm • Tool magazine capacity: 60 tools / tool change time: 0. 5 sec / chip-to-chip time: 5 sec • Cooling system: daikin oil cooler • Prism guides with automatic oil lubrication / renishaw tool measurement / automatic tool collision protection / automatic force and torque control / usb/pcmcia/rs232 ports / chip extractor system • Weight: 6400 kg

Condition: ready for operation (used), Year of construction: 2005, controller manufacturer: MITSUBISHI, number of axes: 3, This 3-axis MORI SEIKI NL 2000 SY/500 was manufactured in 2005. A horizontal turning machine featuring a BF interface and live tools, it also includes a tool setter on both spindles. If you are looking to get high quality turning and milling capabilities consider the MORI SEIKI NL 2000 SY/500 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Isdpfx Ajyaim Eog Uoal • Live tools will follow • Tool setter on both spindles Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 245 mm, travel distance Z-axis: 370 mm, spindle motor power: 11,000 W, overall weight: 2,800 kg, controller model: MSX -805II, number of axes: 2, This MORI SEIKI CL2000B was manufactured in 2008. A robust horizontal turning machine featuring a max turning diameter of 440 mm and length of 363 mm. It includes a 10-station turret and an 8-inch chuck. The control system is the Mori Seiki MSX-805II. Consider the opportunity to buy this MORI SEIKI CL2000B horizontal turning machine. Contact us for more information. Machine Benefits Technical Machine Benefits Iaodpfsx U Dlasx Ag Uel • Max turning length: 363 mm • Max turning diameter: 440 mm • Through spindle hole diameter: 73 mm • 8-inch chuck size Extra Information Machine still under power Dimensions Machine Depth 1975 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 9,000 h, overall weight: 6,100 kg, This 3-axis MORI SEIKI NL2500Y/700 was manufactured in 2007. It features a Mori Seiki Mapps IV control, a main spindle speed of 4000 rpm, and a milling drive speed of 6000 rpm. The machine includes a 12-station turret BMT50, NC tailstock, and a KNOLL high-pressure system at 70 bar. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2500Y/700 machine we have for sale. Contact us for more information. • Control: Mapps IV Iaedpfx Agjx Utwfs Ujl • Rated Power: 41 kVA • Supply Voltage: 3 ~ 200 V / 50 Hz • Workpiece unloading with tray • Various collet chucks Ø40/Ø60/Ø80 • Kitagawa 3-jaw chuck • 12-station turret BMT50 • NC Tailstock • Integrated measuring arm for tool measurement • Enclosed safety enclosure • KNOLL high-pressure system 70 bar & chip conveyor • Milling drive speed 6000 rpm • Main Spindle Speed: 4000 rpm