Mori Seiki ZT 1500 YB

Mori Seiki ZT 1500 YB

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, * Mori Seiki ZT 1500 YB. * Opposed-spindle machine. * Spindle size A2-6, twin spindles. * 2 stacked turrets. * 9-axis controlled turning and milling center. * 2 turrets. * Y-axis upper turret. * 2 C-axes. * Bar capacity: 65 mm. * Two integrated 15 kW motors. * Tool life management and tool wear monitoring. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Oil cooler for both spindles. * 340 Nm cutting torque. * 15-position turret, all positions motorized. * Automatic workpiece collector. * 1.5-meter bar loader. * Interface for bar loader installation. * Rear automatic part pick-up with a special gripper for long parts. * Max. turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Max. distance between main spindle and counter spindle: 920 mm. * Main spindle speed: 5000 rpm. * Counter spindle speed: 5000 rpm. * X1 travel: 210 mm. * Y1 travel: +50 / -50 mm. * X2 travel: 210 mm. * Counter-spindle travel: 920 mm. * Number of powered tool stations: 2 x 15. * Capable of holding 30 tools per turret. * Large selection of external and internal tool holders. * Large selection of axial and radial motorized blocks. * Approximate value of equipment: 18,000 euros. * Speed range of powered tools: 5,000 rpm. * Drive motor for powered tools: 5.5 kW. * Rapid traverse X1, X2: 25,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 30,000 mm/min. * C-axis resolution: 0.001°. * High-precision Hainbuch collet chucks on both spindles. * External and internal tool holders. * Motorized axial and radial blocks. * Communication ports via USB, PCMCIA card, and RS-232. Tsde Afgwnjpfx Akisd * Rear chip conveyor. * Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. * Machine in very good condition. * Machine weight 6.5 tons. * Machine available for inspection while in operation.

Condition: excellent (used), High-performance spot welding tongs with a double-acting cylinder Manufacturer: DALEX, Type 3528 - 4 Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31 kA Electrode force: 60-730 daN Double-acting cylinder, long stroke 62 mm, pre-stroke 40 mm Working stroke with stroke adjustment 0-22 mm with 5/2-way solenoid valve Cardan suspension and mounting bracket 10 m connection cable with control cable Arm extension: 170 mm Arm distance: 170 mm Complete with 1 pair of electrode arms, straight on the top and bottom, 170 mm Synchronous welding control MPS 1036 Todeki Tkpjpfx Akijd Example photo

Condition: excellent (used), Mori Seiki ZT 1500 YB year: 2006 including 5 driven tools Tsdpfx Akjyyfpkeied

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 460,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Tjdpfx Akjq Nmw Ijijd

Year of construction: 2003, condition: ready for operation (used), A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026. Tedoygw Svspfx Akisd

Condition: used, Saw BEHRINGER HBE 321 A Dynamic Todpfx Akex Tvkxsiod

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Tjdpfoxz Ab Rex Akijd Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics Tedpfxjudi Uns Akisd The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 350 kW (475.87 HP), type of input current: three-phase, overall weight: 1,930 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,600 mm, total height: 2,000 mm, AMMONIA CHILLER GEA GRASSO 350 KW Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available Todpfx Akeim R A Ieiod - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Heyligenstaedt Heynumill 2700-PF 3/5-axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Control: Heidenhain TNC 430 X-axis Y-axis Z-axis Tjdpoyaazmsfx Akisd 3,000 mm 4,000 mm 1,500 mm In 2018, the Heynumill underwent a complete overhaul of the hydraulic system, replacement of all electrical cables, renewal of the spindle cooling unit, both longitudinal conveyors were replaced, and the milling heads were completely refurbished. The entire refurbishment cost €160,000. In 2020, the milling gearbox was renewed.