Used Mori Seiki M 300 for sale (197)

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 400mm/300mm/495mm, spindle center table distance: 25mm-325mm, spindle nose table distance: 125mm-620mm, rapid traverse: 24m/min, feed rate: 5m/min, spindle type: ball screw, spindle diameter: 36mm, speed: 6000rpm, spindle power: 5.5kW, spindle mount: BT40. Tool slots: 30, tool change time: 2.5s, clamping time: 7s, max. tool diameter/length: 110mm/250mm, max. tool weight: 8kg. Table dimensions X/Y: 315mm/315mm, table angle: 7.5°, table clamping force: 3400kg, max. workpiece weight: 150kg. Dimensions X/Y: approx. 1900mm/2300mm, weight: approx. 4500kg, control: Fanuc 0-M, operating hours: 732h, piece counter: 172776. Including cooling lubricant system and tool magazine with 30 places. Documentation available. On-site inspection is possible. Iaodpfx Ajt Nhmzog Usl

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction Iedpfxsx Uxdqe Ag Uoal * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Year of construction: 2009, condition: ready for operation (used), Main Drive Ijdsx Sz Dbspfx Ag Uoal Number of axis 5 Spindle Speed 3000 RPM Spindle motor power 5.5 kW Movement Y-Axis Movement 60 mm This 5-axis MORI SEIKI NL3000Y/1250 was manufactured in 2009. It features a MSX-850 control unit, a 300mm chuck, and a 10-station turret. Capable of a max spindle speed of 3,000 rpm and a rotary tool speed of 6,000 rpm, it's ideal for complex turning tasks. Additional features include a Y-axis movement of +/-60mm and a fully programmable NC tailstock. Contact us for further details regarding this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2008, Control system MSX-850 IV. Axes C and Y, live tools, NC tailstock - fully programming. Including chip conveyor. Chuck 300mm hole 90mm Diameter ... 420 - 500 mm Swing over bed ... 995 mm Swing over cross slide ... 825 mm Max. working length ... 1260 mm Max. bar diameter ... 90 mm Axe X ... 280 mm Axe Z ... 1370 mm Max. spindle revolutions ... 3000 rpm Iedpfxex Sw Aao Ag Ujal Spindle boring ... 105 mm Number of toos ... 10 Machine dimensions ... 4532 x 2291 x 2390 mm Machine weight ... 7600 kg

Condition: excellent (used), Year of construction: 2004, CNC Control: MSG-501 X axis mm: 900 Y axis mm: 800 Z axis mm: 980 B axis mm: 0.001 Pallet size mm: 630 x 630 Number of pallets: 2 Table load capacity kg: 1,200 Cutting feed mm/min X,Y,Z: 50,000 Max. rapid traverse m/min X, Y, Z: 50, 50, 50 Spindle speed rpm: 10,000 Spindle power kW: 30/25 Taper type: BT-50 Torque Nm: - Tool changer type: Chain Iodpfexw Rg Hex Ag Ujal Tool changer positions: 60 Max. tool diameter mm: 110 Max. tool diameter with adjacent positions empty: 320 Max. tool length mm: 600 Max. tool weight kg: 30 Coolant tank capacity l: 930 Through spindle cooling bar: Yes EQUIPMENT Chip conveyor Internal cooling Rigid tapping Manuals, electrical diagram, etc. MACHINE DIMENSIONS Length mm: 3,670 Width mm: 5,300 Height mm: 3,270 Weight kg: 19,000

Condition: good (used), Year of construction: 1990, CNC Machining Center Iasdet Rg E Sopfx Ag Usl Manufacturer: MORI SEIKI Model: Partner M300 A-1 Year of manufacture: 1990 Control: FANUC O-M Travels: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid traverse: 24 m/min Feed rate: up to 5 m/min Spindle: Ball screw spindle: 36 mm diameter Feed drives: FANUC AC X/Y-axis Model 5, Z-axis Model 10 Main spindle speed: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: +/- 2 seconds Repeatability: +/- 1 second Pallet clamping force: 3,400 kg Max. workpiece weight: 150 kg Automatic Tool Changer: Number of tools: 30 Tool change time: 2.5 sec Collet clamping time: 7 sec Max. tool diameter: 110 mm Max. tool length: 250 mm Max. tool weight: 8 kg Special accessories: Work completion indicator with signal lamp Magazine for 30 tools Operating hours counter Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Footprint: 1,900 x 2,300 mm 101225ä

Condition: ready for operation (used), Year of construction: 2006, Mori Seiki NL3000Y/1250 Turning Centre (2006) Mori Seiki MSX-850II Control Manufactured & Installed in 2006 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm C & Y Axis Tailstock 12” Chuck Swarf Conveyor Machine Capacity: Max’ Swing over Bed 995mm Max’ Swing over Cross Slide 825mm Max’ Recommended Turning Dia’ 420mm Standard Turning Dia’ 310mm Max’ Turning Length 1260mm Max’ Bar Work Dia’ 90mm X Axis Travel 210 + 70mm Y Axis Travel 120mm (+- 60) Z Axis Travel 1370 C Axis 0.001 Spindle: Main Spindle Speeds 3000rpm 2 Spinde Ranges Spindle Nose A2-8 12” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 4522 x 2291mm Weight 8100Kgs Isdpfx Agow Rry No Usal For sale with Jet Machinery Ltd Jet Machinery Stock No: #78830 Machine Serial Number: NL301FJ0675 Cost: £55,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2020, Technical details: turning diameter: 670 mm turning length: 1540 mm control: F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover: 700 mm Travel turret No.1 (milling spindle) x/y/z: 495 / ± 150 / 1562(+164) mm Rotation B-axis: -30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/40/40 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 20,2/18,8 kW Torque of milling spindle: 120 / 44 Nm tool taper milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool/tool, milling spindle: 1,25 s Spindle 1 RPM: 3000 1/min Spindle 1 Power: 36 / 30 / 25 kW C-axis spindle 1: 0,001 ° Bar capacity spindle 1: 102 mm Spindle 2 RPM: 4000 1/min Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0,001 ° Bar capacity spindle 2: 80 mm dimensions of the machine ca.: 7,8 x 3,6 x 2,9 m Linear scales on axis: X, Y programmable steady: KLU-A530 & SLU-X3.2 Accerories Chip conveyor tool setting spindle load monitor Airblow system Airblow system internal to cutting tool Spindle 1 Chuck Kitagawa 250 (B 210) mm Spindle 2 Chuck Kitagawa 250 (B 210) mm Interface for coolant through the spindle 70 bar Tailstock specification for spindle 2 Measuring probe for work piece Renishaw OMP60 pendant hand wheel Parts and total counter Signal lamp 3 colors Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear window Quick fixed cycles Program restart Signal lamp 4 colours Ethernet I/P Interface manual tool eye Automatic door Air Filter Oil skimmer Isdpfx Ajwl Ag Dsg Uoal Tactile sensor for workpiece measuring Airblow system external Subspindel Spindle 1 coolant jet Spindle 2 coolant jet Coolant Gun Coolant through spindle 70 bar with filter Knoll High performance turning and milling center with multi axis milling head, 76 tool magazine Capto C6, main- and sub spindle, which can act as tailstock. It has automatic door and Matris robot R-2000iC/165F. *

Year of construction: 2007, operating hours: 16,500 h, condition: good (used), functionality: fully functional, machine/vehicle number: NH631GF0405, LPP System (Linear Pallet Pool) automation system with 12 pallets only 16,500 spindle hours Iedpfx Aomfrtweg Usal TECHNICAL DETAILS travel X / Y / Z: 1050 x 900 x 980 mm B-axis: 360 Control: MSX-701 Maps 3 speed: 8000 rpm tool holder: BT 50 number of tool places: 140 number of pallets: 12 table clamping surface: 630 x 630 mm table load: 1500 kg MACHINE DETAILS dimensions: 3,37 x 5,97 x 3,41 m weight: 19 t total power requirement: 64,7 kVA spindle hours: 16.500 Switch-on time: 127.000

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 420mm, turning length: 820mm, spindle bore: 105mm, speed: 3000rpm, spindle power: 22kW, travel X/Z: 280mm/820mm, tool positions: 10, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 4400mm/2100mm/2300mm, weight: approx. 6000kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10000h. Including various accessories. The driven tools have never been used, only the Y-axis has run. Measuring arm and ball screw of the Y-axis are as good as new. Documentation available. On-site inspection is possible. Iasdpfov I U Iysx Ag Ujl

Condition: good (used), Year of construction: 2008, In good technical condition and fully operational. Year of manufacture: 2008. Additional Y-axis ±60 mm Maximum spindle speed 3,000 min⁻¹ Spindle motor power 22/18.5 kW Maximum driven tool speed 6,000 min⁻¹ - 300 mm chuck with 90 mm through hole, spindle head A2-8 - Increased power and torque 25/30 kW, 1,000/1,300 Nm Iasdsxdcigspfx Ag Uel - Turning diameter 420-500 mm - Turning length 1,250 mm - C-axis, driven tools - NC tailstock, fully programmable, separate motor - Increased Z-axis power - New chip conveyor

Condition: used, Year of construction: 2004, MORI SEIKI MT 2000 SZ TURN MILL CENTRE MAKE MORI SEIKI MODEL MT 2000 YEAR 2004 CONTROL MSG 501 SWING OVER CROSS SLIDE 599.5 mm SWING 749.0 mm CHUCK SIZE 250.0 mm DISTANCE BETWEEN CENTRE 1280.0 mm MAX. CUTTING DIAMETER 548.6 mm MAX. CUTTING LENGTH 1018.0 mm BAR CAPACITY 63.5 mm C AXIS 0.001 DEGREE SPINDLE RANGE 4500 rpm SPINDLE MOTOR 20 hp SPINDLE NOSE A2-6 SUB SPINDLE BAR CAPACITY 43.18 mm SUB SPINDLE MOTOR 10 hp SUB SPINDLE SPEED 6000 RPM TOOL CHANGE CAPACITY 60 STATION TURRET 12 STATIONS TRAVEL B AXIS +/- 120 DEGREE Y AXIS +/- 78.7 MM PLUS CNC BARFEED PART CONVAYOR TOOL SETTING PROBE Y AXIS HIGH PRESSURE SWARF CONVAYOR Iajdpfx Ageuq Iwpo Uol FULL SET OF MANUALS GOOD RANGE TOOLING

Condition: used, Year of construction: 2011, Mori Seiki NMV5000 DCG 5-Axis Machining Centre with F31iA5 Control, Spindle Taper BT40, Max Spindle Speed 12,000rpm (22/18.5kW), 61 Position ATC, Hydrajet WP10-1000 High Pressure Through Spindle Coolant. S/No. NM501JK0592 (2011) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Iodpfjx Syf Rjx Ag Uoal

Condition: like new (used), Year of construction: 1999, functionality: fully functional, MORI SEIKI SL-600B/2000 CNC LATHE Category: CNC Turning Centers Reference No.: 400212 Capacity: Ø900 X 2000 MM Year of Construction: 1999 Technical Specification: CNC Control : Fanuc 18iT WORKING CAPACITY Max Turning Diameter : 900 mm Max Turning Length : 2000 mm Swing over bed : 994 mm Distance Between Centers : 2300 mm Swing over cross slide : 733 mm Travels (X) : 485 mm (440 + 45) mm Travels (Z) : 2150 mm TURRET Turret : 12 Station Iajdpfxsx Nv Shs Ag Ujl Square tool shank size : 32 mm Boring bar shank diameter : 65 mm TAILSTOCK Tailstock : MT5 Tailstock Quill Travel : 150 mm Tailstock Quill Dia : 150 mm SPINDLE Max Rotation Speed : 1500 RPM Main Spindle Nose : JIS A2-15 Main Spindle Bore : 185 mm Spindle Type : 3 Step Gearbox Spindle bearing inner diameter : 260 mm MACHINE DIMENSIONS Weight : 16T Additional Details: All Specifications are found online, and subject to verification by buyer.

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 3 Spindle Speed 12000 RPM Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm Isdpfx Aex D H T Aog Ujal This 4-axis MORI SEIKI SH400 was manufactured in 1998. A robust twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Additional attributes include a 1-degree indexing table and a chip conveyor. If you are looking to get high-quality machining capabilities consider the MORI SEIKI SH400 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2009, CNC controller: M720BM Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 (100) Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 356 Swing over bed mm: ø 923,8 Swing over cross-slide mm: 755 Bar work capacity mm: 80 C-axis degree: 0,001° Upper turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 6.000 Iedpjxcqz Isfx Ag Uoal Drive power driven tools kW: 5,5/3,7 (3 min/cont) Indexing time s: 0,25 Main spindle Speed ​​spindle rpm: 4.000 Drive power spindle kW: 18,5/15 (25% ED/cont) Spindle bore mm: ø91 Tailstock Tailstock travel mm: 734 Holder: MT5 Equipment Chip conveyor Tool measuring arm

Condition: excellent (used), Year of construction: 2013, swing over cross-slide 360mm, Maximum cutting diameter 366mm, Maximum cutting length 705mm, Bar capacity 80mm, Spindle speed 4,000rpm, milling speed 10,000rpm, Main spindle power 18.5Kw, Isdpfx Agex Eituj Ujal C axis 0.001 degrees, Y axis -/+ 50mm, 12 station turret. Mori Control M730BM, equipped with Toolsetter, swarf conveyor, 3 jaw chuck, Parts catcher, barfeed unit

Condition: used, Year of construction: 2013, Mori Seiki NVX5100-II/40 Vertical Machining Centre with MAPPS IV/M730BM Control, Travel X/Y/Z = 1050/530/510mm, Table Size 1350 x 600mm x 1200kgs, Spindle Taper BT40, 30 Position ATC, Max Spindle Speed 13,000rpm, High-Pressure Through Spindle Coolant, Swarf Conveyor, Machine Weight 7,000kgs, Floor Space (L x W x H) 3084 x 2851 x 2597mm. S/No. NV502130614 (2013) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Ijdpfx Ajx Syfksg Uoal

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 4 Spindle Speed 12000 RPM Ijdpfsx D H Uaex Ag Usal Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Noteworthy are the through-spindle coolant and chip conveyor. Ideal for automated 4-axis machining, though it requires a new X-axis drive and is currently non-operational. Consider the opportunity to buy this MORI SEIKI SH400 horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2012, Mori Seiki NLX2500SY/700 Turning Centre with MAPPS IV/M730BM Control, Swing Over Bed 920mm, Max Swing Over Cross Slide 742mm, Max Turning Length 705mm, Main Spindle Kitagawa 10” dia Chuck at 4000rpm, Sub-Spindle Kitagawa 6” dia Chuck at 6000rpm, 12 Station Turret, High Pressure Coolant, Bar Feed Interface, Swarf Conveyor, Machine Weight 6,360kgs, Floor Space (L x W x H). S/No. NL254120730 (2012) Iodpfx Agjx Sydgj Ujal Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described Auction 3444 - Ends on 22/01/2026 at 3pm (UK Time) Visit our website for more details...

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 4,000 rpm, spindle motor power: 18,000 W, overall weight: 5,800 kg, controller manufacturer: FANUC, number of axes: 5, This 5-axis MORI SEIKI NL 2500 SY was manufactured in 2007, featuring a sub-spindle and a 12-station motorized turret. It includes main and sub-chucks of 250 mm and 210 mm, respectively, and a bar capacity of 80 mm. The machine offers a spindle speed of 4,000 rpm and a tool speed of 6,000 rpm. Consider the opportunity to buy this MORI SEIKI NL 2500 SY horizontal machine centre. Contact us for more information about this machine. Additional equipment • Renishaw tool measurement arms (2) • Communication: USB, PCMCIA, RS-232 • Bar feeder interface Iedpfx Asyaiqkeg Ueal • Automatic parts catcher • Independent chuck pedals • Chip extractor: hinged lateral Machine Benefits Technical Machine Benefits • Sub-spindle motor: 15 kw • Tool motor: 5. 5 kw (torque 640 nm) • Tool speed: 6000 rpm • Turret index: 0. 2 sec • 12-station motorized turret • Oil cooler: daikin • C-axis: both spindles Extra Information Machine still under power

Condition: used, Year of construction: 2013, Mori Seiki NLX2500SY/700 Turning Centre with MAPPS IV/M730BM Control, Swing Over Bed 920mm, Max Swing Over Cross Slide 742mm, Max Turning Length 705mm, Main Spindle Kitagawa 10” dia Chuck at 4000rpm, Sub-Spindle Kitagawa 6” dia Chuck at 6000rpm, 12 Station Turret, High Pressure Coolant, Bar Feed Interface, Swarf Conveyor, Machine Weight 6,360kgs, Floor Space (L x W x H). S/No. NL254130936 (2013) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Iasdpfx Agox Syaho Ujl

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, This 4-axis DMG Mori Seiki NVX-5100 II was manufactured in 2013. It features a Fanuc control unit, a table size of 1350 x 600 mm, and a maximum table load of 1100 kg. The spindle operates at 12,000 rpm with a motor power of 15 kW. It includes a 60-tool magazine, rapid traverse speed of 30,000 mm/min, and a Daikin oil cooler. Consider the opportunity to buy this DMG Mori Seiki NVX-5100 II vertical machining centre. Contact us for more information. Machine Benefits Iedpfx Asyaipyjg Uoal Technical Machine Benefits • Spindle speed: 12000 rpm / spindle motor power: 15 kw • Rapid traverse speed: 30000 mm/min • Max load on table: 1100 kg • Dimensions: 1350 x 600 mm • Tool magazine capacity: 60 tools / tool change time: 0. 5 sec / chip-to-chip time: 5 sec • Cooling system: daikin oil cooler • Prism guides with automatic oil lubrication / renishaw tool measurement / automatic tool collision protection / automatic force and torque control / usb/pcmcia/rs232 ports / chip extractor system • Weight: 6400 kg

Condition: used, Year of construction: 2013, Mori Seiki NTX2000/1500SZM 5-Axis Mill/Turn with F31iB5 Control, Main Spindle Kitagawa 10”dia Chuck at 4,000rpm, Sub-Spindle Kitagawa 10”dia Chuck, 76 Position ATC, 10 Station Indexing Turret, Spindle Taper Capto C6, SMW SLU 3.2 Hydraulic Steady, High Pressure Coolant, Swarf Conveyor. S/No. NTX20130611 (2013) Iodpfx Aox R Uc Ujg Uoal Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2005, controller manufacturer: MITSUBISHI, number of axes: 3, This 3-axis MORI SEIKI NL 2000 SY/500 was manufactured in 2005. A horizontal turning machine featuring a BF interface and live tools, it also includes a tool setter on both spindles. If you are looking to get high quality turning and milling capabilities consider the MORI SEIKI NL 2000 SY/500 machine we have for sale. Contact us for more information. Iedpfsyaim Ejx Ag Ueal Machine Benefits Technical Machine Benefits • Live tools will follow • Tool setter on both spindles Extra Information Machine still under power