Used Mori Seiki for sale (186)

Condition: ready for operation (used), Year of construction: 1999, operating hours: 24,364 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Fanuc MSC 501 (Fanuc 16i), spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Spindle speed range: 10,000 rpm Spindle motor power: 22 kW Rapid traverse (x/y/z): 32 mm/min Tool magazine capacity: 40 (SK40) Pallet size: 2 x 400 x 400 mm Table load: 0.5 t Dsdpfx Ajyc Unmsfnjun Table indexing: 1° MACHINE DETAILS Control: Fanuc MSC 501 (Fanuc 16i) Total power requirement: 56 kVA Dimensions & Weight Required space: approx. 2.9 x 4.1 x 3 m Machine weight: approx. 8.7 t Operating hours: 24,364 h EQUIPMENT Chip conveyor Interface for internal coolant supply

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 510 mm, turning diameter: 366 mm, spindle bore: 73 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 5,705 mm, total width: 1,922 mm, feed length X-axis: 260 mm, feed length Y-axis: 100 mm, feed length Z-axis: 590 mm, quill travel distance: 564 mm, quill diameter: 80 mm, swing diameter over cross slide: 755 mm, turning diameter over bed slide: 923 mm, type of input current: three-phase, overall weight: 5,700 kg, swing diameter over bed slide: 923 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2006 Mori Seiki NL2000Y/500 CNC Lathe with Y-Axis and live tooling. Plastics-only medical device use. Available now in Ireland. Machine Type: CNC Turning Centre with Y-Axis & Live Tooling Manufacturer: Mori Seiki (DMG MORI) Model: NL2000Y/500 Year: 2006 Location: Ireland Availability: Immediate Machine Overview Available now from Used Machine Tools Ireland, this 2006 Mori Seiki NL2000Y/500 CNC Lathe is presented in excellent working condition with a very clean operational history. The machine was used exclusively for machining plastics by a medical device manufacturer, resulting in: Minimal spindle and guideway wear Clean internal condition Long remaining service life Unlike many plastics-only machines, this example is fully equipped with coolant, making it immediately suitable for both plastic and metal machining applications. The NL2000Y/500 is widely regarded as one of the most capable and reliable Y-axis CNC lathes in its class, featuring Mori Seiki’s renowned BMT turret technology for rigidity, accuracy, and thermal stability. Key Features & Highlights Y-Axis CNC Lathe – complex milling and turning in one setup Live Tooling (6,000 RPM) – drilling, tapping, and milling capability BMT (Built-in Motor Turret) – exceptional rigidity and precision Plastics-Only Medical Use – exceptionally low wear Full Coolant System Installed Coolant Tank Capacity: 235 Litres Tailstock & Workpiece Unloader – production-ready configuration MSX-850 III Control – powerful and reliable Mori Seiki control Technical Specifications – Mori Seiki NL2000Y/500 Capacity Distance Between Centres: 500 mm Chuck : Collet Chuck Max Turning Diameter: 366 mm Standard Turning Diameter: 275 mm Dujdpfjyhqmpex Afnjn Max Turning Length: 510 mm Bar Capacity: 65 mm Swing Over Bed: 923.8 mm Swing Over Cross Slide: 755 mm Axis Travel X-Axis Travel: 260 mm Z-Axis Travel: 590 mm Y-Axis Travel: ±50 mm (100 mm total) Spindle Max Spindle Speed: 5,000 RPM Spindle Nose: JIS A2-6 Through-Spindle Bore: 73 mm Spindle Motor: 15 / 15 / 11 kW Turret & Tooling Turret Type: BMT (Built-in Motor Turret) Number of Tool Stations: 16 Max Live Tool Speed: 6,000 RPM Max Live Tool Torque: 29 Nm Turret Index Time: 0.2 seconds Feed Rates Rapid Traverse (X / Z): 30,000 mm/min Rapid Traverse (Y): 10,000 mm/min Tailstock Tailstock Travel: 564 mm Spindle Diameter: 80 mm Tailstock Taper: MT4 Live Centre Automation Workpiece Unloader: Yes Max Workpiece Diameter: 80 mm Max Workpiece Length: 200 mm Max Workpiece Weight: 3 kg Coolant System Coolant Equipment: Yes Coolant Tank Capacity: 235 Litres Electrical & Dimensions Power Requirement: 31.5 kVA Machine Dimensions (L × W × H): 2705 × 1922 × 2120 mm Machine Weight: 5,700 kg Included with Machine ✔ Selection of axial driven toolholders ✔ Selection of radial driven toolholders ✔ Selection of static toolholders Additional Notes Used exclusively for plastic machining in a medical device environment Fully equipped with coolant equipment, suitable for plastics or metals Specifications provided in good faith but not guaranteed Ideal Applications Medical device manufacturing Precision plastic machining CNC turning & milling with Y-axis Aerospace, electronics & high-precision components

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 510 mm, turning diameter: 366 mm, spindle bore: 73 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 5,705 mm, total width: 1,922 mm, feed length X-axis: 260 mm, feed length Y-axis: 100 mm, feed length Z-axis: 590 mm, quill travel distance: 564 mm, quill diameter: 80 mm, swing diameter over cross slide: 755 mm, turning diameter over bed slide: 923 mm, type of input current: three-phase, overall weight: 5,700 kg, swing diameter over bed slide: 923 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2009 Mori Seiki NL2000Y/500 CNC Lathe in very good condition. Plastics-only medical device use. Y-Axis, live tooling, tailstock, workpiece unloader. Available now in Ireland. Machine Type: CNC Turning Centre with Y-Axis & Live Tooling Manufacturer: Mori Seiki (DMG MORI) Model: NL2000Y/500 Year: 2009 Location: Ireland Availability: Immediate Machine Overview We are pleased to offer this 2009 Mori Seiki NL2000Y/500 CNC Lathe in very good condition, available exclusively through Used Machine Tools Ireland. This machine was used only for dry machining of plastics by a medical device manufacturer, meaning: No heavy metal cutting No coolant contamination Exceptionally low mechanical wear The Mori Seiki NL Series is globally recognised as a benchmark for high-precision CNC turning, and the NL2000Y/500 is especially sought after due to its Y-axis capability, live tooling, and BMT (Built-in Motor Turret) design. Key Features & Benefits Y-Axis CNC Lathe – complex milling and turning in one setup BMT Turret Technology – superior rigidity, accuracy, and thermal stability Live Tooling up to 6,000 RPM – ideal for milling, drilling, and tapping Medical / Plastics-Only Use – extremely clean operating history Tailstock & Workpiece Unloader – ideal for automated production MSX-850 III Control – powerful, reliable Mori Seiki control system Technical Specifications – Mori Seiki NL2000Y/500 Capacity Distance Between Centres: 500 mm Chuck : Collet Chuck Max Turning Diameter: 366 mm Standard Turning Diameter: 275 mm Max Turning Length: 510 mm Bar Capacity: 65 mm Swing Over Bed: 923.8 mm Swing Over Cross Slide: 755 mm Axis Travel X-Axis: 260 mm Z-Axis: 590 mm Y-Axis: ±50 mm (100 mm total) Spindle Max Spindle Speed: 5,000 RPM Spindle Nose: JIS A2-6 Through-Spindle Bore: 73 mm Spindle Motor: 15 / 15 / 11 kW Dujdpfx Afoyhqkzenen Turret & Tooling Turret Type: BMT (Built-in Motor Turret) Tool Stations: 16 Max Live Tool Speed: 6,000 RPM Live Tool Torque: 29 Nm Turret Index Time: 0.2 seconds Feed Rates Rapid Traverse (X / Z): 30,000 mm/min Rapid Traverse (Y): 10,000 mm/min Tailstock Tailstock Travel: 564 mm Spindle Diameter: 80 mm Taper: MT4 Live Centre Automation Workpiece Unloader: Yes Max Workpiece Diameter: 80 mm Max Workpiece Length: 200 mm Max Workpiece Weight: 3 kg Electrical & Dimensions Power Requirement: 31.5 kVA Machine Dimensions (L × W × H): 2705 × 1922 × 2120 mm Machine Weight: 5,700 kg Included with Machine ✔ Selection of axial & radial driven toolholders ✔ Selection of static toolholders ✔ Extraction unit for plastic machining Additional Notes Used exclusively for dry plastic machining No coolant system fitted, however the machine is prepared for coolant installation Specifications provided in good faith but not guaranteed Ideal Applications Medical device manufacturing Plastic & polymer machining Precision CNC turning & milling Aerospace, electronics & high-tolerance components This Mori Seiki NL2000Y/500 CNC Lathe represents a rare opportunity to acquire a premium Japanese turning centre with an exceptionally clean usage history.

Condition: excellent (used), Year of construction: 2009, Description The machine was used exclusively for plastics! Excellent condition TECHNICAL DETAILS X-axis travel: 260 mm Duedpeycu Rujfx Afnjn Y-axis travel: 100 mm (+/- 50 mm) Z-axis travel: 590 mm C-axis movement: 0.001 Max. main spindle speed: 6,000 rpm Maximum turning diameter: 356 mm Some axial and radial milling holders Tool turret: 16-position all driven Bar capacity: 65 mm Axis: 4 MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg EQUIPMENT Parts catcher Driven tools Tailstock Tool setting probe Dust extraction

Condition: used, Year of construction: 2013, Mori Seiki NVX5100-II/40 Vertical Machining Centre with MAPPS IV/M730BM Control, Travel X/Y/Z = 1050/530/510mm, Table Size 1350 x 600mm x 1200kgs, Spindle Taper BT40, 30 Position ATC, Max Spindle Speed 13,000rpm, High-Pressure Through Spindle Coolant, Swarf Conveyor, Qty of Spindle Tooling as Lotted, Machine Weight 7,000kgs, Floor Space (L x W x H) 3084 x 2851 x 2597mm. S/No. NV502130614 (2013) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Djdjyhdhgspfx Afnsun

Condition: used, Year of construction: 2007, Mori Seiki NH5000/40 DCG Twin Pallet Horizontal Machining Centre with Mori Seiki CNC Control, Table Size 500mm x 500mm (500kg), 60 Tool ATC, BT40 Spindle Taper, Travels X Axis 730mm, Y Axis 730mm, Z Axis 850mm, Max Work Piece Size 800mm Diameter x 1000mm High, Spindle Speed Max 14,000rpm, Hydra-Jet G10-1000 High Pressure, Coolant Filtration System, Filtermist Oil Mist Extractor, Machine Weight 12400kg. S/No. NH502GE0400 (2007). Country of Origin: Japan Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Dsdpeyhdrxjfx Afneun

Condition: used, Year of construction: 2007, Mori Seiki NH5000/40 DCG Twin Pallet Horizontal Machining Centre with Mori Seiki CNC Control, Table Size 500mm x 500mm (500kg), 60 Tool ATC, BT40 Spindle Taper, Travels X Axis 730mm, Y Axis 730mm, Z Axis 850mm, Max Work Piece Size 800mm Diameter x 1000mm High, Spindle Speed Max 14,000rpm, Hydra-Jet G10-1000 High Pressure, Coolant Filtration System, Filtermist Oil Mist Extractor, Machine Weight 12400kg. S/No. NH502GE0400 (2007). Country of Origin: Japan Duedpfx Ajyfgxvofnen Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2014, Mori Seiki NMV 3000 DCG 5 Axis CNC Milling Machine with Mori Seiki F31IAS CNC Control, 350mm Work Area/Bed, 120 Position ATC, BT40 Spindle Taper, Hydrajet WP10-1000 High Pressure Coolant System, ConSep Swarf Conveyor. S/No. V3010111005 (2014). Country of Origin: Switzerland Location: These lots are located in York, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Dodsyfgbqopfx Afneun

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Duodpeygw Hmofx Afnon Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: like new (used), Year of construction: 2010, CNC controller: FANUC FS-31iA5 (MAPPS 4) Capacity X-axis travel mm: 685 Y-axis travel mm: 125 Z-axis travel mm: 1075 Turning length mm: 1045 Max. turning diameter mm: ø: 600 Bar work capacity mm: 65 Turn-mill spindle Full indexing specifications: YES B-axis degree: 120º FULL INDEXING SPECIFICATION Speed spindle rpm: 12000 Drive power kW: 18.5/11 Tool magazine Magazine places: 80 Tool holder: CAPTO C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret Number of tool slots St .: 12 Drive power driven tools kW: 5.5/3.7 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 25/22 (100%/40%ED) Spindle bore mm: 73 Chuck type: HOLLOW CHUCK (8") Manufacturer: KITAGAWA Counter spindle Dodpfx Afewwuaaonsun Speed spindle rpm: 5000 Drive power spindle kW: 25/22 (100%/40%ED) Spindle bore mm: 73 Chuck type: HOLLOW CHUCK (8") Manufacturer: KITAGAWA Equipment Electronic Handwheel Chip conveyor Swivel head Signal lamp High pressure pump Mist collector Workarea light CE conformity Chuck foot switch (double) for main and counter spindle Coolant gun Toolholders are not included Precision NC rotary table, rapid traverse and feed rate 100 1/min incl. direct measuring system Oil skimmer Linear scales Gantry loader LG-10 AII RENISHAW MP700 Working time hours Under power: 76.510 Spindle 1: 11.521 Spindle 2: 9.271 Potencial nominal kVA: 102 Basic machine dimensions / weight Length mm: 8.000 Width mm: 4.000 Height mm: 3.000 Weight kg: 15.000

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: FANUC, controller model: FS-31IA (MAPPS III), workpiece length (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 500 kg, total height: 3,138 mm, total length: 2,725 mm, total width: 4,610 mm, overall weight: 12,900 kg, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 120, tool length: 500 mm, CNC controller: FS-31IA (MAPPS III) Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 850 Rapid traverse m/min: 50 B-axis degrees: 360º (1º) Distance spindle nose - table surface mm: 100 – 830 Acceleration in the axes m/s2: 9.8 (X), 10.8 (Y), 6.9 (Z) Worktable Number of pallets: 2 Table dimensions mm: 500X500 Maximum workpiece size (D x H) mm: 800 X 1000 Max. workpiece weight kg: 500 APC time s: 7 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 22/18.5 Tool holder: No.40 Spindle torque Nm: 220 Tool system Tool holder: BT-40 Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 500 Max tool weight kg: 12 Tool-to-tool time s: 0,9 Chip-to-chip time s: 3,3 Equipment Chip conveyor Dujdpfx Afevw Sc Tjnjn Workarea light CE conformity Coolant gun TOOL LIFE MANAGEMENT Cooling Tank capacity: 680 Machine running times Rated power kVA: 49 Basic machine dimensions / weight Length mm: 2.725 Width mm: 4.610 Height mm: 3.138 Weight kg: 12.900

Condition: ready for operation (used), Year of construction: 2004, operating hours: 37,165 h, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 50 m/min, controller manufacturer: FS-18IMB (MAPPS 2), workpiece height (max.): 800 mm, workpiece diameter (max.): 560 mm, workpiece weight (max.): 300 kg, table width: 400 mm, table height: 400 mm, table length: 400 mm, spindle speed (min.): 14,000 rpm, tool length: 400 mm, tool weight: 8,000 g, CNC controller: FS-18IMB (MAPPS 2) Axes X-axis travel mm: 560 Y-axis travel mm: 560 Z-axis travel mm: 630 Rapid traverse m/min: 50 Rotary Worktable (4th axis): FULL 4TH AXIS ROTARY TABLE Worktable Dujdswx Itvepfx Afnen Number of pallets: 3 Table dimensions mm: 400 Maximum workpiece size (D x H) mm: 560 x 800 Max. workpiece weight kg: 300 APC time s: 6 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 18.5/11 KW Spindle torque Nm: 120 Nm (10%ED) Tool system Tool holder: BT-40 Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 400 Max tool weight kg: 8 Tool-to-tool time s: 0,9 Chip-to-chip time s: 2,8 Equipment Chip conveyor Signal lamp 4th axis Ready for internal cooling (40/80 bar) RENISHAW OMP60 CE Round pallet storage Measuring system (worktable) Cooling Tank capacity: 500 High-pressure bar: 70 Machine running times Under power: 135.042 Rated power kVA: 32,8 Operating Time: 37.165 Basic machine dimensions / weight Length mm: 4.004 Width mm: 2.397 Height mm: 2.711 Weight kg: 9.600

Condition: used, Year of construction: 2004, MORI SEIKI MT 2000 SZ TURN MILL CENTRE MAKE MORI SEIKI MODEL MT 2000 YEAR 2004 CONTROL MSG 501 SWING OVER CROSS SLIDE 599.5 mm SWING 749.0 mm CHUCK SIZE 250.0 mm DISTANCE BETWEEN CENTRE 1280.0 mm MAX. CUTTING DIAMETER 548.6 mm MAX. CUTTING LENGTH 1018.0 mm BAR CAPACITY 63.5 mm C AXIS 0.001 DEGREE SPINDLE RANGE 4500 rpm SPINDLE MOTOR 20 hp SPINDLE NOSE A2-6 SUB SPINDLE BAR CAPACITY 43.18 mm SUB SPINDLE MOTOR 10 hp SUB SPINDLE SPEED 6000 RPM TOOL CHANGE CAPACITY 60 STATION TURRET 12 STATIONS TRAVEL B AXIS +/- 120 DEGREE Y AXIS +/- 78.7 MM PLUS CNC BARFEED PART CONVAYOR TOOL SETTING PROBE Y AXIS HIGH PRESSURE Dedpfx Aeuq Iwpofnjun SWARF CONVAYOR FULL SET OF MANUALS GOOD RANGE TOOLING

Condition: ready for operation (used), Year of construction: 2003, turning length: 363 mm, turning diameter over cross slide: 430 mm, spindle speed (max.): 3,500 rpm, spindle bore: 61 mm, overall weight: 2,800 kg, distance between centers 550 mm diameter over bed 510 mm, over carriage 430 mm spindle bore 61 mm maximum spindle speed 3500 rpm Dujdpfxjyh Nl Us Afnen weight 2800 kg

Condition: used, Year of construction: 2011, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, controller manufacturer: Fanuc, controller model: i 31A, workpiece weight (max.): 2,200 kg, table width: 800 mm, table length: 800 mm, table load: 2,200 kg, spindle nose: MAS BBT 50, CNC Control MSX-701 lV (Fanuc i 31A) Pallet table size 800 x 800 mm Number of pallets 2x Table load 2200 kg Movement X-axis 1400 mm Movement Y-axis 1200 mm Movement Z-axis 1350 mm Table indexing 0,001° Spindle Taper MAS BBT 50 Spindle Speed 10 -8.000 R/min Spindle motor 37/30 kW Magazin capacity 100 Dusdpfxeydmife Afnsn If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of axes: 4, This 4s MORI SEIKI NHX 5000 was manufactured in 2011. It features a dual pallet system with a pallet size of 500 × 500 mm and a maximum pallet load of approximately 500 kg. The spindle speed reaches up to 12,000 rpm, with a tool magazine capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NHX 5000 horizontal machining center we have for sale. Contact us for further details. • Pallet system: Dual pallet; size 500 × 500 mm; max load ≈ 500 kg • Tool system: Magazine 40 tools (optional 60 / 120); tool-to-tool ≈ 0.9 s; chip-to-chip ≈ 2.8 s • B-axis: Continuous 360°; indexing resolution 0.001° • Rapid traverse (X/Y/Z): ≈ 60 m/min • Accuracy/Construction: High-precision linear guides; thermal displacement control system; glass scales (depending on configuration) Duedpfoyh Hzyjx Afnjn Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2005, turning length: 450 mm, travel distance X-axis: 135 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 450 mm, C-Axis rapid traverve 400 Min Turret indecing time 0,2 sec for 1 station Heavy duty cutting (depth cut 6mm) 162.7 mL/Min LNS Bar feeder new 2017 Dedpfxsydcvze Afneun Large package tooling driven / live tools 8 axis controlled with 2 spindles and turrets Max. turning Ø: 250mm X-Axis: 135mm Y-Axis: 40+40 = 80mm Z-Axis: 450mm B Axis: 510° Spindle bore: 49mm Speedrange: 6000Rpm Spindle power: 30kW Subspindle speeds: 6000Rpm Subspindle bore: 49mm ATC / revolver: 12 Speed live tools: 6000Rpm Positions lower revolver:12 Speed live tools: 6000Rpm Length: 2800mm Width: 2000mm Height: 2000mm Weight: 5000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, spindle motor power: 11,000 W, total height: 2,120 mm, overall weight: 5,500 kg, product length (max.): 2,900 mm, number of axes: 3, This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details. • Operating hours: 11,996 • Control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm Dedpjyg Iclofx Afneun • Turret: 12 stations (all driven), indexing time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW • Tailstock: programmable (B-axis), stroke 564 mm • Coolant pump • Oil cooler • Electronic handwheel • 3-color status lamp • Air-conditioned electrical cabinet • Condition/availability: machine in perfect condition; excellent appearance; very good condition; videos available; immediately available Additional equipment • Chip conveyor • Bar feeder interface • Bar feeder: SAMSYS MULTI-3000 (short bar, 1000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus size 65 • HAINBUCH collets: Ø 6.5 – 10 – 16 – 18 – 20 – 25 – 26 – 30 – 40 mm • Square collets: 20×20 – 35×35 – 40×40 mm • Hex collet: 14 mm • Tool measuring probe arm • 7 driven toolholders (3 axial, 4 radial) • 15 static toolholders • Parts catcher • Automatic door opening/closing • Isolation transformer • Documentation & CD-ROM • Transport and handling clamping brackets

Year of construction: 2007, condition: used, 4 pcs. rope pulleys for counter weight of a FB 225 Dujdpfxed Nbkzo Afnsn

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm Djdpeydi Svofx Afneun turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: used, Year of construction: 2008, Technical details: x-travel: 1400 mm Dsdpfswi Ibuox Afnjun y-travel: 1200 mm z-travel: 1350 mm control: MSX- 701 Mapps III table surface area: 800 x 800 mm rapid traverse: 50 m/min table rotating: 360.000 x 0,001 B-Achse ° table load: 2,0 t numbers of pallets: 2 turning speed range: 8000 1/min power capacity - milling spindle: 37 kW no. of tools in the magazine: 60 Stück tool taper: HSK-A 100 weight: 31 t dimensions: 5,5 x 2,8 x 3,68 m Equipment: - Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping - storage 1 MB - Big Plus spindle - Knoll filter system - mechanical Oil dust collector - elect. hand wheel - renishaw - abso- scale i X/Y/Z- axis - 5 free m- funktions - 48 extra off sets - dual ballscrews on X/Y/Z- axis *

Year of construction: 1990, condition: used, total length: 4,800 mm, total width: 1,700 mm, total height: 2,000 mm, Empty weight: 5.500 kg Price: On request - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: 3242 - Drive system: CNC - Swing over bed [mm]: 520 - Carriage turning diameter [mm]: 350 - Distance between centres [mm]: 1125 - Spindle bore [mm]: 50 - Min. spindle speed [rpm]: 42 - Max. spindle speed [rpm]: 4200 - Options: Chip conveyor, Turret - └ Tool magazine [pcs.]: 10 - X-axis travel [mm]: 1090 - Y-axis travel [mm]: 160 - Transport dimensions: 4800mm x 1700mm x 2000mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Duedpjx Ivnyjfx Afnsn Lukas van Rossum

Condition: good (used), Year of construction: 1998, CNC Vertical Machining Center MORI SEIKI SV500-50, Year 1998, Fanuc MSC-518 Control With pallet changer. Table: 1100x600mm Dodpfx Aowifzljfnjun BT50 spindle mount, 40-position magazine. Spindle speeds up to 6,000 rpm Travels: X800, Y510, Z510, Rapid traverse 32 m/min Machine without magnetic chipboard. Complete machine documentation available.

Condition: good (used), Year of construction: 1997, CNC Vertical Machining Center MORI SEIKI Type: SV500-50 Year 1997 Djdpfx Aowa Nvujfneun Fanuc MSC-518 Control Table: 1100 x 600 mm Travel: X 800 - Y 510 - Z 510 mm Rapid traverse 32 m/min Spindle mount: BT50 Spindle speeds up to 6000 rpm Complete documentation available. A clamping magnet is not included in the machine delivery. For further information, see data sheets:

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Offered here is a lathe from the manufacturer Mori Seiki with double turret, a C-axis and driven tools. Duodoyh I H Dspfx Afnen The machine is in very good condition and can be inspected and tested in our facility. The scope of delivery includes 4x driven tool holders.