Used Mori Seiki Gv 503 for sale (198)

Condition: used, Year of construction: 2000, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller manufacturer: MORI SEIKI, controller model: MSX-502III, table width: 500 mm, table length: 500 mm, overall weight: 14,300 kg, With double pallet, Mori Seiki MSX-502III control system. Excluding workholding fixtures and tooling. Lrsdezxtbpjpfx Ac Aot PICK-UP BY SEPTEMBER 2026.

Condition: good (used), Year of construction: 2000, MORI SEIKI SH-503/40 TWIN PALLET CNC HORIZONTAL MILLING MACHINE WITH MORI SEIKI MSX-502III CONTROL UKUK Pallet Dimension 500 x 500mm. Maximum Table Load 1,000kg. Axis Travel X'=630mm, 'Y'=600mm, 'Z'=650mm, 'B'=1° Increment. Rapid Traverse 'X,Y,Z'=32m/min. Spindle Taper BT40. Maximum Spindle Speed 12,000rpm (22kW Motor). 120 Position ATC. Maximum Tool Ø150mm (Without Adjacent Tools), Maximum Length 360mm, Maximum Tool Weight 12kg. S/No. 1212 (2000). DESCRIPTION With Renishaw OMP 600 Spindle Probe, Blum Laser Tool Setting/Breakage Unit, Dual Auger To FSE Chip Conveyor, Through Coolant Filtration System, Oil Chiller, Filtermist Mist Extraction Unit, Handwheel & Signal Tower. Overall Dimensions L4,500 x W2,725 x H3,267mm. Weight 14,900kg. Note: Tooling & Tombstones Not Included. Lrjdsxqt Tijpfx Ac Aet

Condition: good (used), Year of construction: 2007, swing over cross-slide 935mm, swing over cross-slide 738mm, Lrodpfxoz D H Nuo Ac Aet Maximum cutting diameter 620mm, Maximum cutting length 2158mm, Bar capacity 130mm, Spindle speed 2,400rpm, Main spindle power 30 Kw, 12 station turret. Mori Control M730BM, swarf conveyor, 3 jaw chuck, fixed steady.

Condition: used, Year of construction: 1999, Mori Seiki MV-653/50 Heavy Duty Vertical Machining Centre. Serial No. 92 (1999) with MSG-502 Control, Table Size, 1700 x 660mm, 50 INT Taper, 80 Position ATC, High Pressure Coolant, Through Spindle Coolant, 15,000rpm Max Spindle Speed, Swarf Conveyor Ljdpsz Ar Atsfx Ac Aert Please Noter: Nikken 500mm dia 4th Axis & Powered Tailstock not included can be purchased as a separate lot. Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 1995, overall weight: 5,500 kg, center distance: 650 mm swing over bed: 520 mm bar capacity: 78 mm tool turret: 10 tools maximum spindle speed: 3500 rpm Lredpfoz Eaiqsx Ac Ajt weight: 5500 kg

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 10,000 rpm, spindle speed (max.): 20,000 rpm, Fanuc control system 2 tables, 1100 x 600 mm 40-tool changer BT40 spindle Maximum spindle speed: 20,000 rpm Ljdpfx Acoy Ndlpe Aort 2 chip conveyors

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 540 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis DMG Mori Seiki LaserTec 50 was manufactured in 2019. It features a Celos with Siemens 840D sl Operate control, integrated ytterbium cw fiber laser, and a compact design with a 4 m² footprint. Ideal for machining diamond tools with dimensions up to Ø 355 mm and 420 mm in length. If you are looking to get high-quality laser machining capabilities, consider the DMG Mori Seiki LaserTec 50 machine we have for sale. Contact us for more information. • Control: CELOS with Siemens 840D sl Operate; 21.5" ERGOline Control with multi-touch screen • Processes: Laser fine cutting, laser drilling, laser welding • Work capacity: Machining diamond tools up to Ø 355 mm and 420 mm in length • Axes/table: NC swivel rotary table; 5-axis transformation; high-dynamic torque motors in B and C axes • Drives: Linear drives in X/Y with acceleration > 1 g • Laser source: Integrated ytterbium CW fiber laser; 450 W QCW ytterbium fiber laser with 4,500 W pulse peak power and 450 W average power • Processing head: 80 mm focal length; collision switch • Vision: Camera through beam path for fiber laser • Construction: Solid mineral cast base • Footprint: Approx. 4 m² • Condition/usage: ~100 working hours (as new) • Notes: CNC precision laser machine with high-speed processing; highly dynamic and precise Ljdpfx Acjyfv Tvj Aert Additional equipment • Fanuc robot automation • Keller automatic extraction system • Basement exhaust extraction system

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, number of axes: 4, This 4-axis MORI SEIKI NHX 5000 was manufactured in 2011. It features a generous X-axis travel of 730 mm, Y-axis travel of 730 mm, and Z-axis travel of 880 mm. The machine is equipped with a continuous 4th axis (B-axis) and a tool changer capacity of 60 positions. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Control unit: MAPPS IV CNC • Pallet dimensions: 500 x 500 mm • Table rotation: Continuous 4th axis (B-axis) Additional equipment • Chip conveyor • Coolant system with filtration unit and paper filter Ljdpfxjz Earfe Ac Aert • High-pressure coolant, 90 bar • Tool presetting (tool measurement) Technical Specification Taper Size ISO 40

Condition: good (used), Year of construction: 1999, CNC Vertical Machining Center MORI SEIKI SV – 400 Ledpfxsz D T I Re Ac Aert Control system: FANUC MSC-501 Travel range X-axis: 600 mm Travel range Y-axis: 430 mm Travel range Z-axis: 460 mm Spindle mounting: BT40 Spindle speed: 12,000 rpm Drive power: 22/18.5 kW Tool magazine: 40 Table size: 900 x 500 mm Accessories: Preparation for internal coolant supply, high-pressure pump 20 bar, 2 x articulated band chip conveyor, 30-position tool magazine, 4-axis interface with rotary table Nikken CNC-200

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 6,100 kg, number of axes: 4, This 4-axis DMG Mori Seiki NL2500Y/700 was manufactured in 2006. It features a robust control unit, MORI SEIKI MSX-850, and includes an integrated mist extraction unit, chip conveyor, tailstock, turret, and tool setter. With a mass of 6100 kg, this turn-mill centre is designed for high-performance machining. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki NL2500Y/700 machine we have for sale. Contact us for further details. - Phase: 3- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 113 A- Current Rating of the Spindle Motor: 140 A- Interrupting Capacity: 5 kA- Short Circuit Rating: 1 kA- Rated Power: 39 kVA- Mass of Machine: 6100 kg- Control Unit: MORI SEIKI MSX-850- Additional Equipment / Attachments: Integrated mist extraction unit (SARA UC1 SDIV), chip conveyor / chute integration, tailstock, turret, tool setter / probe arm Lrsdpfx Acez A Uz No Aet Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 1998, Mori Seiki SH630 Horizontal Machining Centre Year 1998 Spindle speed - 10,000rpm CNC Control - Fanuc drives / Mori Seiki MSC control 4 Axis Table Length 630mm Lredpfjzp Rftjx Ac Ajt Table Load 1000kg Table Width 630mm Y axis travel - 760mm Z axis travel - 840mm X axis travel - 840mm Tool magazine with capacity for 60 tools 2 Tombstones Comes with Metal standing frame

Condition: like new (used), Year of construction: 2010, operating hours: 14,010 h, turning length: 800 mm, turning diameter: 430 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 455 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 6,000 rpm, feed length X-axis: 455 mm, feed length Z-axis: 430 mm, workpiece weight (max.): 5 kg, total height: 8,500 mm, total length: 2,500 mm, total width: 2,495 mm, overall weight: 8,500 kg, CNC controller: Fanuc FS31IA5 (MAPPS 4) Capacity Turning length mm: 800 Max. turning diameter mm: ø: Ø430 Turn-mill spindle X-axis travel mm: 455 Z-axis travel mm: 800 B-axis degree: ±120 (0.001º) Speed spindle rpm: 12000 Drive power kW: 9/5.5 Y-axis travel mm: ±105 Tool magazine Magazine places: 76 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret X-axis travel mm: 160 Z-axis travel mm: 730 Number of tool slots St .: 10 Main spindle Speed spindle rpm: 6000 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 7.5/5.5 Chuck type: Solid Chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Coolant gun Working time hours Under power: 76482 Spindle 1: 14010 Spindle 2: 4306 Potencial nominal kVA: 48 Basic machine dimensions / weight Length mm: 2500 Width mm: 2495 Lrsdpfx Acsy Rpq Ts Ast Height mm: 8500 Weight kg: 8500

Condition: used, Year of construction: 1995, Fanuc MSC 516 2 pallets, 500x500mm BT40 spindle Ledpezgrzksfx Ac Aort Spindle speed: 12,000 RPM 20-tool changer Coolant pressure: 20 bar Renishaw

Condition: ready for operation (used), Year of construction: 2013, operating hours: 26,711 h, This 3-axis DMG Mori Seiki NVX 5080 II/40 was manufactured in 2013. It features an X-axis travel of 800 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine has a weight of 6350 kg and is equipped with a rated power of 34 kVA. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki NVX 5080 II/40 vertical machining center we have for sale. Contact us for further details. • Machine weight: 6350 kg • X-Axis: 800 mm • Y-Axis: 530 mm • Z-Axis: 510 mm Lsdpsz Akwpefx Ac Aort • Main electronic connection: 200 V, 3-phase, 50 Hz • Power consumption: 34 kVA • Machine type: Vertical Machining Center • Year: 2013 • Made in: Japan • Serial number: NV502130709 • Machine connected and available for inspection/testing.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 176,232 h, This 4-axis MORI SEIKI DuraVertical 5080 was manufactured in 2008. It features an X-axis travel of 800 mm, Y-axis travel of 530 mm, and Z-axis travel of 500 mm. The machine has a robust weight of 6100 kg and includes a rotary/indexing table, which has been unused since new. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DuraVertical 5080 vertical machining centre we have for sale. Contact us for further details. • Machine weight: 6100 kg • X-Axis: 800 mm • Y-Axis: 530 mm • Z-Axis: 500 mm • 4-AXIS: Yes • Main electronic connection: 200 V, 3-phase, 50 Hz • Power consumption: 27 kVA • Machine type: Vertical Machining Center • Year: 2008 • Made in: Japan Lrodpez Akr Tjfx Ac Aet • Serial number: DV005HD1472 • Equipment: Rotary/indexing table, unused since new • Machine connected and available for inspection/testing.

Condition: ready for operation (used), Year of construction: 2008, This 3-axis MORI SEIKI NV 5000 alpha1 was manufactured in 2008. It features an X-axis travel of 1020 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine has a weight of 7300 kg and includes a central spindle cooling unit, along with a Blum laser tool measurement system. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NV 5000 alpha1 vertical machining centre we have for sale. Contact us for further details. • Machine weight: 7300 kg • X-Axis: 1020 mm Lrsdpfx Aoz Akr Hoc Ajt • Y-Axis: 510 mm • Z-Axis: 510 mm • 3-AXIS: 3 • Main electronic connection: 200 V, 3-phase, 50 Hz • Power consumption: 48 kVA • Machine type: Vertical Machining Center • Year: 2008 • Made in: Japan • Serial number: NV501HB5475 • Equipment: Central spindle cooling unit • Tool measurement: Blum laser tool measurement system with A2 reference • Workpiece measurement: Renishaw OMP probe

Condition: used, Year of construction: 2005, turning diameter 170 mm Max. Turning length 120 mm bar capacity 52 mm control FANUC MSX-501 Lrsdpfxezyvb Is Ac Ajt travel -x1 axis 140 mm travel -x2 axis 140 mm travel -z1 axis 450 mm travel -z2 axis 410 mm travel -y axis +/- 40 mm travel - b axis (spindle 2) 525 mm speeds station 1 60 - 6000 U/min spindle bore 1 62 mm speeds station 2 60 - 6000 U/min spindle bore 2 62 mm driven tools turning speeds 6.000 U/min CNC Turning- and Milling Center | MORI SEIKI - ZT 1500 Y equipped with 2 turrets for driven tools, Y-axis and bar loader. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZT1500Y | ZT-1500 Y | ZT 1500Y | ZT-1500-Y

Condition: used, Year of construction: 2012, turning diameter max. 356 mm turning length 1.255 mm control M 730 BM MAPPS IV Lrodpfxjz Dbqto Ac Ast greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm distance between spindles 1.511 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 91 mm max. bar capacity 80 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm x-travel 260 mm z-travel 1.345 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 50 kVA weight of the machine ca. 7,8 t dimensions of the machine ca. 6,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI SEIKI - NLX 2500 SY / 1250 - Subspindle

Condition: used, Year of construction: 2008, turning diameter 600 mm turning length 1.045 mm control MSX - 711 III MAPPS III swing diameter over support 600 mm distance between spindles 1.255 mm max. bar capacity 65 mm turning speed range - main spindle max. 5.000 min/-1 power capacity - main spindel 25 / 22 kW no. of turning speeds 2 spindle nose JIS A2-6 spindle bore 73 mm C-Axis 0,0001 ° internal diameter 120 mm chucking diameter 200 mm Speed range Tool Spindle max. 12.000 min/-1 Power rating Tool Spindle 5,5 / 3,7 kW tool taper Capto C5 internal diameter 65 mm B - Axis 0,0001 ° swivellable +/- 120 ° x-axis 685 (610 + 75) mm y-axis +/- 125 mm z-axis 1 mm number of toolpositions 12 pos. Shank height for square tool 20 mm Drill shank diameter max. 32 mm tools in tool magazin 40 pos. max. tool diameter 70 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 4 kg change-time tool to tool 1,25 sec Rapid traverse X / Z: 50 m/min Rapid traverse Y: 30 m/min Rapid traverse X2 / Z2: 30 m/min total power requirement 88 kVA weight of the machine ca. 16,5 t dimensions of the machine ca. 6,0 x 4,0 x 3,0 m Lsdpfxsz At T Hs Ac Ajrt High-Precision 5 Achsen CNC-Turning- and Millingcenter MORI SEIKI - NT 3200 DCG / 1000 SZ - 5 Axis - Swivable Milling-Head (B-Axis) - Subspindle - lower turret - approx. 11,300 power-on hours - approx. 9,200 spindle hours

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle Lrsdpfjzv Sf Uox Ac Ast CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 14.000 min/-1 power capacity - main spindel 18,9 / 14 kW max. Torque 100 Nm tool taper HSK A-63 table surface area 630 x 500 mm max. table load 300 kg Swivel range -5 / +110 ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm Ledpfx Acezyu Ume Aert rapid traverse 24 m/min Feed force 4,8 kN feed speeds 1 - 24.000 mm/min total power requirement 25 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DMG MORI SEIKI - DMU 50 - 5 Axis - swivable rotary table

Condition: good (used), Year of construction: 1987, Machine is in good working condition. Lrodpfx Acsz Arxzj Ajt Parts shown by hand not come.

Condition: good (used), Year of construction: 1999, Machine is used, in good condition. Lsdpsz Arlzsfx Ac Aert Parts shown by hand not come.

Condition: used, Year of construction: 2013, x-travel 735 mm y-travel 650 mm z-travel 560 mm control 840D sl FD operate Siemens turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 35 / 24 kW max. Torque 119 Nm tool taper HSK-A63 DIN 69893 table diameter 680 mm max. table load 600 kg max. workpiece sizes 650 x 650 x 500 mm swivellable +/- 120 ° rotatable 360 ° number of toolpositions 30 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8,0 kg change-time chip to chip ca. 4,9 sec feed speeds max. 40.000 mm/min Ljdszipzyopfx Ac Asrt rapid traverse 40 m/min total power requirement 65 kVA weight of the machine ca. 11,6 t dimensions of the machine ca. 4,0 x 3,0 x 2,95 m 5 Axis CNC - MachiningCenter Universal DMG - DMU 65 FD monoBLOCK - Swivel-Rotary-Table - without tools - only 8,444 operating hours - only 2,246 spindle hours - Air blast cooling through spindle center - MDynamics package - Power failure safety package - Coolant ring jet: 7x air jets, 13x water jets - Tropical package (35° – 50° Celsius) - Coolant unit (ICS) with two pressure levels: 40 and 80 bar - Use of special tools (18 kg / 370 mm)

Condition: excellent (used), 2 axis cnc Mori Seiki TL-40 lathe year 1998 MSD-518 II Fanuc control X-axis-240mm Z-axis-2950mm 20-2000tm spindle 91mm bar capacity 10-station turret 440mm maximum machining diameter 6805mm x2520mm diameter 10t weight Lodpfxsuaqado Ac Ajrt