Used Mori Seiki Nl 2500 Sy for sale (198)

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, year of manufacture 1996. Model: SH-50 Serial number: 450 The machine is still under power and available at short notice. • P8 Power Supply worth €1,500 was newly replaced in August 2024 • The spindle was repaired in 2017 and, since then, has mostly been used in single-shift operation, as we primarily produce single parts and small batches. For this reason, the machine has spent most of its time being set up. • Machine: Milling machine Mori Seiki SH50 • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Configuration: Horizontal milling machine with indexing table • Tool capacity: 60 (BT40) • Number of pallets: 2 (500mm x 500mm) • Travels: X630mm / Y600mm / Z650mm • Spindle speed: 12,000 rpm • Chip conveyor Known defects: Rapid traverse speed of the X axis has been reduced by 20% to extend the life of the telescopic covers. The sealing ring on the pallet changer is likely defective, leading to oil leakage. As a temporary fix, we installed a ball valve in between; when we need to change pallets (which is not very often), we open it manually. Isdpfx Ajyt Nnpen Usar The machine is sold as viewed, without any guarantee or warranty. Any liability for defects, including hidden defects, is excluded to the extent permitted by law. If you have any questions or need further information, please feel free to write us a message or call us.

Condition: used, Year of construction: 1986, Technical details: Iasdpfowvblaex An Uer x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm total power requirement: 20 kW weight of the machine ca.: 8 t Vertical Processing Centre 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough. *

Condition: new, Mori Seiki MV 40 E main spindle MV40SPU080ADA01 NEW GM4021244-009 from stock (traces of storage) Please refer to the pictures for further technical information Scope of delivery as shown Auction price is without 19% VAT and invoice The invoice will be enclosed with the shipment. The invoice will be enclosed with the shipment. Cj2Gdlmgos Express shipping also possible worldwide / Worldwide express-shipping possible. Iaedpfx Asuxnwasn Uor No guarantee / warranty Due to the new warranty law we are obliged to inform you of the following: Even if the goods are new or used, we sell the goods as spare parts without warranty as we often deal with used products from dismantling or insolvency goods, a warranty within the legal framework is not possible for us. Trading between traders is one way of excluding the statutory guarantee or warranty. If you have any questions, just write to us. Payment method Paypal bank Pick up by yourself You will receive information about bank details, payment methods, etc. by email Request more information PROVIDER Schneider Technik CNC 74423 Obersontheim, Germany +49 7973 ... show Last online: Last week Registered since: 2018 16 ads online Please call me back Show more SEND INQUIRY EN I am a dealer Receive offers for similar machines Send inquiry Privacy policy TELEPHONE & FAX +49 7973 ... show +49 7973 ... show print view Share Manage advertisement edit

Condition: excellent (used), Year of construction: 2003, CNC machining center MORI SEIKI NH 5000/40 2003 Technical data: x-travel 630 mm y-travel 600 mm z-travel 670 mm Tool holder BT 40 Iasdjvuql Uspfx An Ujr Spindle speeds - continuously variable 14000 rpm Pallet change with rotary indexing table 360x1 degree 2 Max. workpiece weight 500 kg Tool change device 60-way Table size 500 x 500 mm Total power requirement 56 kW

Condition: ready for operation (used), Mori Seiki turret head with 10 positions for Mori Seiki CL-150.200. Shank height for square tools: 20 mm, maximum drill shank diameter: 32 mm, turret indexing time: 0.7 sec, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Iedsx Dw Rfopfx An Ujar

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 980 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 8,000 rpm, spindle nose: ISO 50, number of spindles: 240, CNC MSX 701 III Travels (X/Y/Z axes): 900 / 800 / 980 mm Pallet working surface: 630 x 630 mm Pallet load capacity: 1,200 kg High-torque spindle max speed: 8,000 rpm Rapid traverse rate (X, Y, Z): 50 m/min Tool magazine capacity: 240 tools Spindle motor power (30 min / continuous): 37 / 30 kW Machine Configuration: 240-position RACK tool magazine Spindle taper DIN 69871 – ISO 50 Tool breakage detection in magazine Index table with 1° indexing FASTEMS interface, model MLS-MD Spindle speed 8,000 rpm – 37/30 kW Iedpfx Aeykpg Hon Usar TOOL IC SYSTEM BALLUFF interface No. 600 macro variables No. 1 load monitor No. 200 storable programs No. 512 tool life management No. 999 tool offsets No. 48 workpiece coordinate systems Data server + ATA card Mori Seiki scraper-type chip conveyor with drum filter MARPOSS application, model MIDA T25G, with E86N radio transmission system META pumping unit, model M 50/50, partial filtration system, 50 bar high pressure COMET drilled pallet Instruction manuals and CE Declaration of Conformity

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 400 mm z-travel 400 mm control MSX 501 Mori Seiki table surface area 700 x 450 mm max. table load 350 kg number of T-slots 4 T-slot - width 18 mm T-slot - distance 100 mm Number of revolutions 12.000 U/min power capacity - main spindel 18,5 / 15 / 11 kW tool taper BT 40 max. Torque 110,5 Nm diameter of forward milling spindle bearing 70 rapid travel x/y/z 20.000 mm/min feed speeds 1 - 20.000 mm/min Tipp feed 15 Steps / 0 - 1.260 mm/min Number of Toolpositions in magazine 40 Pos. Max. mould width 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm Iedpfx Ajv Az Ucon Ujar max. tool weight 8 kg change-time chip to chip 2,8 sec change-time tool to tool 1,0 sec total power requirement 34 kVA weight of the machine ca. 7,2 t dimensions of the machine ca. 2,8 x 3,0 x 2,9 m Machining Center Vertical MORI SEIKI - NV 4000 DCG - ca. 14.000 Operating-Hours

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC Control: MSG-501 + MAPPS X axis mm: 800 Iodpex Rvtbefx An Uear Y axis mm: 510 Z axis mm: 510 Worktable dimensions mm: 1,100 x 600 Table load capacity kg: 1,000 Cutting feedrate mm/min (X, Y, Z): - Max. rapid traverse m/min (X, Y, Z): 42, 42, 42 Spindle speed rpm: 12,000 Spindle power kW: 18.5 Taper type: ISO-40 Torque Nm: - Tool changer type: RANDOM Tool changer positions: 30 Max. tool diameter mm: 80 Max. tool diameter with adjacent positions empty: 125 Max. tool length mm: 300 Max. tool weight kg: 8 Coolant tank capacity l: 230 Through spindle coolant bar: - EQUIPMENT Chip conveyor Oil chiller Automatic shutdown system DIMENSIONS Length mm: 2,788 Width mm: 2,710 Height mm: 2,603 Weight kg: 6,350

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 1063, turning length: 790 mm, turning diameter: 650 mm, travel distance X-axis: 350 mm, travel distance Z-axis: 860 mm, center width: 900 mm, TECHNICAL DETAILS Turning diameter: max. 650 mm Turning length: max. 790 mm Swing over bed: 890 mm Swing over cross slide: 560 mm Distance between centers: 900 mm Travel paths X-axis: 350 (25 + 325) mm Z-axis: 860 mm Main spindle Speed range: 4 – 1,010 rpm Drive power: 37 / 30 kW Max. torque: 3,870 Nm Number of speed ranges: 2 Spindle bearing diameter: 240 mm Spindle bore: 168 mm Max. bar diameter: 144 mm Usable bar diameter: 120 mm Spindle nose: JIS A2-11 Chuck diameter: 610 mm Turret Number of tool stations: 12 Square tool shank height: 32 mm Max. drill shank diameter: 65 mm Tailstock Travel: 680 mm Iajdpfoxb Amgsx An Ujr Quill diameter: 110 mm Quill stroke: 100 mm Tailstock taper: MT 4 Feeds Rapid traverse X-axis: 5 m/min Rapid traverse Z-axis: 8 m/min Jog feed rate: 0 – 1,260 mm/min MACHINE DETAILS Control: MORIC T5F Electrical data Total power requirement: 69 kVA Frequency: 50 Hz Space requirement & weight Required space: approx. 6.0 x 3.0 x 2.6 m Machine weight: approx. 9.2 t EQUIPMENT Documentation Coolant system Tool presetting arm Three-jaw chuck Chip conveyor

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: NT315HF0043, Control MSX-711 (Fanuc 3Li) for 5axes simult. Spindel A2-5 40 pos. ATC type Capto C5 Bar-feeder LNS MoveS2 INVENTORY NR.2180207, MACHINE EQUIPPED WITH : Control MSX-711 (FANUC 3Li) for 5 axes simultaneous machining, color screen 15’’ and dialog system MAPPS III Memory capacity up to 1000 programs Options : tools correctors (milling spindle), B tools life gestion, input of tools correctors G10, 3 interpolations, variable thread step (G34), circular threading, personalised macro, high precision contouring control (control II contour AI), card ATA 1 GB, offset tool for 5 axes machining Chips conveyor (with chain) model/500 B-axis with direct motor (DDS) ATC type CAPTO C5/ 40 positions Tools to zero setting system with automatic arm for milling spindle High-pressure cooling system type KNOLL with 500L tank, pump and paper filtration, for cooling through spindle centre Cutting fluid coolant unit Type KNOLL Linear measuring system for Axes X1 / Y / Z1 Tool monitoring system through control of main spindle motor and feed motors Automatic workpiece measuring system with touch-test RENISHAW and macro B for use in Milling spindle Light signal Automatic machine stop Workpieces receptor vat Ø52mm, L120mm 10 additional M functions Flange for cylinder, threaded ring, traction tube, bore Ø 52 Clamping chuck HAINBUCH Spanntop Axzug Nova, with stop type 100 for pieces in chuck and for jobs in bars with passage, clamping head type 32, A2-5 direct mounting, adapter Hydraulic chuck KITAGAWA, type BB206A5, Ø170mm, A2-5 direct mounting, passage Ø52mm Bar-feeder LNS, Type Move S2 Diameter of roung bars : Ø8 – 80 mm, bars length : 700 mm – 1600 mm ; loading from the front ; longitudinal shift : 470 mm ; set of guidings Ø18-20 Ø24-26 and Ø28-30 ; pushers : 1x Ø 8 – 1x Ø 15 mm ; guiding devices for main spindle Ø 21 – 26 and 31 mm Fire extinctor through carbonic gas type Tyco KLA III with 10kg CO2 Aspiration system ELBARON RON/A 3000 D-2H with full rest Iaodpfx Anjd Hkucj Uor

Condition: used, Year of construction: 2011, turning diameter max. 320 mm turning length max. 810 mm control MSX-701 IV greates pass round over bed 800 mm Swing dia. over traverse guideway 800 mm distance between spindles 1.130 mm Number of revolutions max. 5.000 rpm power capacity - main spindel 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm Number of revolutions max. 5.000 rpm power capacity - Sub spindle 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm Traverses Subspindle B: 870 mm rapid traverse ( X / Y / Z ) 1: 30 / 20 / 50 m/min rapid traverse ( X / Y / Z ) 2: 30 / - / 50 m/min Tipp feed 0 - 5.000 mm/min total power requirement 94 kVA weight of the machine ca. 8,3 t dimensions of the machine ca. 10,0 x 3,0 x 2,5 m Iaedpov E R E Nefx An Uer CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: used, Year of construction: 2007, x-travel 560 mm y-travel 560 mm z-travel 630 mm Control MSX 701 III MAPPS Max. rpm 14.000 min/-1 power capacity - main spindel 18,5 / 11 kW max. Torque 120 Nm tool taper MAS BT 40 distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 100 - 730 mm Ijdpjwbi Adjfx An Ujar numbers of pallets 2 size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm max. workpiece height 900 mm change time of pallets 6,0 sec b - axis 0,001 ° number of toolpositions 60 pos. tool taper MAS BT 40 max. tool diameter 70 / (140) mm max. tool length 400 mm max. tool weight 8,0 kg rapid traverse ( X / Y / Z ) 50 m/min feed speeds 0 - 50.000 mm/min Tipp feed 0 - 1.260 mm/min total power requirement 35 kVA weight of the machine ca. 9,8 t dimensions of the machine ca. 5,5 x 3,5 x 2,8 m CNC - Machiningcenter Horizontal MORI SEIKI - NH 4000 DCG - pallet-changer - Control options Program restart, cylindrical and spiral interpolation High-speed milling cycles, island and pocket milling cycles

Condition: used, Year of construction: 2002, turning diameter 390 mm turning length 507 mm control MSG 805 MAPPS max. turning diameter 390 mm greates pass round over bed 680 mm Swing dia. over traverse guideway 510 mm centre distance 618 mm turning speed range - main spindle 45 - 4.500 min/-1 power capacity - main spindel 11 / 7,5 kW spindle bearing diameter 110 mm Iaodpfx Asvzhiqsn Uor spindle bore 73 mm max. bar capacity 51 mm spindle nose JIS A2-6 chucking diameter 210 mm C-Axis 0,001 ° x-axis 235 (195+40) mm z-axis 520 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity driven tool-stations 5,9 / 4,5 kW Shank height for square tool 25 mm Drill shank diameter max. 50 mm turret change time 0,2 sec. tailstock adjustment 490 mm dia. of quill 85 mm taper of center MT 4 quill stroke 120 mm rapid traverse X: 18 / Z: 24 m/min Tipp feed 0 - 1.260 mm/min total power requirement 30,1 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,0 x 2,5 x 2,5 m CNC - Turning- and Millingcenter MORI SEIKI - SL 204 MC

Condition: used, Year of construction: 2008, turning diameter max. 320 mm turning length 810 mm control MSX 701 MAPPS III standard turning dia. 200 mm Main spindle: Number of revolutions max. 6.000 min/-1 power capacity - main spindel 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Subspindel: Number of revolutions max. 6.000 min/-1 power capacity - Sub spindle 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Turret 1 + 3: number of toolpositions je 16 pos. Number of driven toolspositions je 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+65 / -45) mm Turret 2: number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+45 / -65) mm axis stroke: x-travel 1-3: 210 mm y-travel 1-3: 110 mm z-travel 1+3: 300 / 2: 810 mm total power requirement 90 kVA weight of the machine ca. 9,3 t dimensions of the machine ca. 4,5 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T3Y3 - Main- and Subspindle Iodpfx Anetqmqwo Usar - 3 turrets, 2x upper / 1x below - 3x Y-Axis - 3x 16-pos. tool-drive - incl. 28x collets - incl. Hainbuch changing device

Condition: used, Year of construction: 2010, turning diameter max. 320 mm turning length 810 mm control MSX 701 Number of revolutions max. 6.000 U/min power capacity - main spindel 22 / 18 kW Isdpev E R E Aefx An Ujar max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm Number of revolutions max. 6.000 U/min power capacity - Sub spindle 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm b-axis 900 mm total power requirement 86 kVA weight of the machine ca. 8,1 t dimensions of the machine ca. 8,0 x 3,5 x 2,8 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: excellent (used), With Sub-spindle With C-axis, with Y-axis With driven tools FANUC/MORI MSX 501 control Turning diameter max 190 mm Turning length -235 mm Spindle speeds 50-5'000 rpm Top turret tool holders 1+2 with 16 driven positions Bar loader FMB Turbo 8-80 Workpiece pick-up device Tool presetting device Misc. accessories MARCELS MASCHINEN CH Isdpex I A Awefx An Uear

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, operating hours: 25,350 h, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 750 mm, number of slots in tool magazine: 120, number of spindles: 1, spindle nose: BT50, spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, Tool breakage option included 7-pallet carousel Iasdotqfk Nspfx An Usr NC FANUC MF-M6

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 Iodpfx Aewlvlgon Uoar FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 6675 1727 J, travel distance X-axis: 800 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, TECHNICAL DETAILS Travel paths x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm Ijdpewm I Nyjfx An Usar General information Machine weight: approx. 8 t

Condition: good (used), Year of construction: 2005, Horizontal machining center Machine type: Mori Seiki NH 8000 DCG Control: Fanuc 18 imb + Mapps 2 Year of construction: 2005 TECHNICAL DATA: Travels: X-axis: 1,400 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: 0.001° Rapid traverse: (X/Y/Z): 50 m/min. Speed range: 10,000 1/min. Drive power: 30 / 25 kW Tool holder: BT 50 Tool changer Tool places: 140 Pallet system Number of pallets: 2 Pallet size: 800 x 800 mm Machine weight: 32,000 kg Space requirement (LxWxH): 9.200 x 4.900 x 3.920 m Iedpfx Ansv Nhyle Ujar Equipment features: Internal cooling (IKZ): bar Chip conveyor High pressure pumps

Condition: reconditioned (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, CNC controller: MSX-711 (MAPPS IV) Capacity Turning length mm: 1.540 Max. turning diameter mm: ø ø610 (Turret 2 ø274) Swing over bed mm: ø ø660 Swing over cross-slide mm: ø660 (Turret 2 ø300) Turn-mill spindle Full indexing specifications X-axis travel mm: 495 Y-axis travel mm: ±125 Z-axis travel mm: 1.560 B-axis degree: ±120° Isdpfx Answztq Es Uoar Speed ​​spindle rpm: 12.000 Drive power kW: 18,5/11 (10 min./cont) Tool magazine Magazine places: 76 Tool holder: Capto C6 Lower turret Number of tool slots St .: 10 Indexing time s: 0,19 Main spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Counter spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Equipment Spindle 2 with tailstock option Electronic Handwheel Interface High-pressure coolant system Chip conveyor Air blow for chuck and tool tip Auto tool presetter for upper and lower Bar feeder interface Hobbing function

Condition: ready for operation (used), Year of construction: 2009, operating hours: 17,691 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, TECHNICAL DETAILS Travel Paths & Axes Travel path X-axis: 560 mm Travel path Y-axis: 560 mm Travel path Z-axis: 630 mm B-axis max. rotational speed: 44.4 rpm Rapid Traverse Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Workpiece Dimensions Max. workpiece height: 900 mm Max. workpiece diameter: 630 mm Max. workpiece weight: 400 kg Spindle & Tools Max. spindle speed: 14,000 rpm Distance spindle center to top of pallet: 80–640 mm Distance spindle nose to center of pallet: 100–730 mm Tool magazine: 60 positions Tool change time: 0.9 s Tool holder: BT 40 Pallets Pallet dimensions: 400 x 400 mm Number of pallets: 2 Pallet change time: 6 s Ijdpfjxvzt Isx An Uoar Feed Feed rate X-axis: 50,000 mm/min Feed rate Y-axis: 50,000 mm/min Feed rate Z-axis: 50,000 mm/min Work Table Table width: 400 mm Table length: 400 mm Table load capacity: 400 kg MACHINE DETAILS Control model: MSX-701IV Power consumption: 32.8 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,400 x 2,600 mm Total weight: 9,800 kg Operating Hours Power-on hours: 46,259 h Operating hours: 26,725 h Machining hours: 17,691 h

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: NH501CA0185, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 670 mm, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS X-travel: 630 mm Iasdpfewtq Tbex An Uer Y-travel: 600 mm Z-travel: 670 mm Tool holder: BT 40 Spindle speed: 14,000 rpm Tool changer: 60 positions Pallet changer with rotary table: 360x1° Max. workpiece weight: 500 kg Table size: 500 x 500 mm MACHINE DETAILS Total power requirement: 56 kW Rated power: 66 kVA Machine weight: 9,700 kg

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS CNC control: MSX-501III X axis mm: 560 Y axis mm: 560 Z axis mm: 660 B axis deg.: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X,Y,Z: 60,000 Max. rapid traverse m/min X,Y,Z: 50 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent positions empty mm: 170 Max. tool length mm: 450 Max. tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant (high-pressure): Yes EQUIPMENT Iasdpfxsxfka Ns An Uer Double chip conveyor ISO-40 taper High-pressure through-spindle coolant with pump Tool breakage detection probe Part measuring probe RENISHAW MACHINE DIMENSIONS Length mm: 3,755 Width mm: 2,300 Height mm: 2,610 Weight kg: 7,600

Condition: used, Year of construction: 2000, Lathe Mori Seiki SL 200 MC, year of manufacture 2000 Isdpfx Asxyvkvjn Ujar