Machining Centres - Horizontal

MORI SEIKI NH 5000 DCG/50

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 Bjdpoyzza Iefx Aqteli *

Condition: good (used), Year of construction: 2011, Ref. -No.: 10565 Bledpfxsxvw I Ij Aqtji Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2011 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS3XXXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Distance Spindle /Table: 200 - 1050 mm Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Rapid Travel X/Y/Z: 60 mm / min Tool to tool: 2,4 sec Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Pallet height: 1200 mm Positioning (X, Y and Z axes):: + - 0,003 mm Repeatability (X, Y and Z axes):: + - 0,0015 mm Payload pallet: 800 kg Axial: 14700 N Further information: - Cutting feed (same for X-, Y- and Z-axis): 0.001 - 30m/min - Distance between spindle center and upper edge of the area: 100mm - 900mm - Table size range: 630 mm - Positioning of the lower table: 1 ° - Positioning of the rotary table: 0.001 ° - Tools used: SK 50 - Operating oil: 53l - Slide lubricating oil / spindle head lubrication: 3.0 l - Coolant for spindle & ball screw head: 37l Machine can be inspected under power by arrangement.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,321 h, travel distance X-axis: 560 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 640 mm, controller manufacturer: MAZATROL, controller model: SmoothG, spindle speed (max.): 18,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control, through-spindle cooling at 32 bar, and a Renishaw OMP 60 touch probe. With a spindle speed of up to 18,000 rpm and a tool magazine capacity of 60, it's ideal for precise and efficient machining. Consider the opportunity to buy this Mazak HCN 4000 horizontal machining centre. Contact us for more information about this machine. • Table: Pallet size 400 x 400 mm; Number of pallets 2; Indexing 1° increments • Control: Mazatrol SmoothG • Coolant/air: Through-spindle cooling 32 bar; Through-spindle air supply; Niagara flushing Bledsx Enllepfx Aqtji • Functions: Tapping without compensating chuck (rigid tapping); G00 tilt function • Compliance: CE marking Additional equipment • Renishaw OMP 60 touch probe • Renishaw Inspection+ (Version 2022) • Tool length measurement system • Tool ID system • Chip conveyor • Additional filter cartridges Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain ITNC640, spindle speed (max.): 10,000 rpm, We offer in good condition with around 2.500 spindle hours Posmill CE1000 with following options: Heidenhain linear scales in X, Y and Z-axis Heidenhain TNC 640 control Air true spindel Spindel 10.000 RPM ISO40 Tool changer 40 tools ATC Bedpfx Aqjyindastoli Belt filter with Internal coolant 20 bar Hexagon Touch probe Hexagon tool probe Chip conveyor Thermal spindel compensation Z-axis Technical specification:" X-Axis Travel: 1060 mm Y-Axis Travel: 600 mm Z-Axis Travel: 600 mm Machine is within new tolerence and geometry protocol is available.

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Bodevf D Anjpfx Aqteli

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible. Blodpfx Aetx Dn Uoqtoi

Condition: good (used), Year of construction: 1990, 4-Axis Machining Centre Table dimensions 1200 x 660 mm Travel paths X 1050 mm, Y 650 mm, Z 660 mm Max. table load 1600 kg Feed speeds 15000 mm/min. Tol magazine with 31 tool places, partly equipped with BT 50 tool holders. 4th axis (controlled) NIKKEN CNC 250, clamping chuck diameter 250 mm Bledpfx Aqsfbml Njtei Dimensions in mm: about 3000 x 5000 x 2900 Weight in kg: about 13000

Condition: excellent (used), Year of construction: 2003, CNC machining center MORI SEIKI NH 5000/40 2003 Technical data: x-travel 630 mm y-travel 600 mm z-travel 670 mm Blsdpfovuql Ujx Aqtji Tool holder BT 40 Spindle speeds - continuously variable 14000 rpm Pallet change with rotary indexing table 360x1 degree 2 Max. workpiece weight 500 kg Tool change device 60-way Table size 500 x 500 mm Total power requirement 56 kW

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,208 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool capacity: 40 tools (optional magazine 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measuring system; Linear scale standard • Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling unit • Application Tuning Cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A Bodpfx Aqsyt Hwzetoli • Fuse protection: 125 A • Short circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating time: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll Flow Monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Bjdjxvw Izjpfx Aqtjli Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.