Used Dmg Dmf 250 Linear for sale (406)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 20 mm, spindle motor power: 5,500 W, spindle speed (max.): 8,000 rpm, spindle bore: 25 mm, travel distance X-axis: 50 mm, travel distance Y-axis: 350 mm, type of input current: three-phase, bar passage: 20 mm, overall weight: 4,200 kg, spindle diameter: 20 mm, Equipment: documentation/manual, rotational speed infinitely variable, Steuerung: Fanuc 310i Hauptspindel Iedjzz I Dkspfx Aanstl Drehzahl: 10.000 U/min Leistung: 5,5 kW Drehmoment: 14 Nm Stangendurchlass: max. 20 mm C1-Achse: 0,001 Verfahrweg Z1-Achse: 80 mm Gegenspindel Bjjgsn8yaky Drehzahl: 10.000 U/min Leistung: 5,5 kW Drehmoment: 14 Nm C2-Achse: 0,001 Verfahrwege X2 / Z2-Achse: 240 / 300 mm Eilgang in X2 / Z2 Achse: 40 m/min Werkzeugträger I (X/Y) Technologie: Linearer Schlitten Innenbearbeitung: 6 Stationen Werkzeughalter: 20 mm Außenbearbeitung: 6 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzangenfutter, ESX 16 Verfahrwege in X/Y-Achse: 50/350 mm Eilgang in der X/Y-Achse: 40/30 m/min Stangenlader BOSS 332 E Werkzeugträger II (Y) Technologie: Linearer Schlitten Innenbearbeitung: 4 Stationen Werkzeugaufnahme: 20 mm Außenbearbeitung: 4 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzange, ESX 16 Verfahrweg in Y2-Achse: 120 mm Eilgang in der Y2-Achse: 40 m/min DETAILS ZUR MASCHINE Gewicht: 4200 kg Angeschlossene Last: 30 kVA Betriebsspannung: 400 V / 50 Hz AUSRÜSTUNG Spänemanagement: Späneförderer Kühlmittelmanagement: Kühlmittelpumpe Weitere Ausstattung: Signallamp

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,950 mm, total length: 6,000 mm, total width: 3,800 mm, table width: 900 mm, table length: 3,100 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, overall weight: 25,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, X-axis travel: 2500 mm Y-axis travel: 920 mm Z-axis travel: 820 mm Table size: 3100 x 900 mm Spindle nose: SK/ISO40 Spindle speeds: 20 - 18.000 rpm Toolchanger: 30 pockets Controller: Heidenhain iTNC 530 Featured with: - Chipconveyor Itsdpeyac Tlefx Aansl - Cooling through spindle 40 Bar - ISO40 tools - Machine manuals Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm Machine weight: 25.000 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: HEIDENHAIN TNC 640 CELOS, rotational speed (min.): 20 rpm, rotational speed (max.): 10,000 rpm, DMG MORI DMF 360|11 linear – Traveling Column Milling Machine For sale is a DMG MORI DMF 360|11 linear with extensive equipment and a HEIDENHAIN TNC 640 / CELOS control system. Technical data Travel ranges X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Rapid traverse rate X/Y/Z: 80 / 60 / 60 m/min Linear drive in the X-axis Itodpfx Aezv Egleansl Milling head / Spindle NC swivel milling head, B-axis Spindle speed: 20 – 10,000 rpm Spindle power: 44 / 32 kW Torque: 288 / 187 Nm Tool holder: SK50 / DIN ISO 7388-1-A50 Tool magazine 120 tool positions Chain magazine with dual gripper Mechanical setup aid for tool loading Work table Fixed table with integrated rotary table Rotary table: Ø 1,050 mm Rotary table arranged on the left side Max. load capacity of rotary table: 1,200 kg Hydraulic clamping Control system HEIDENHAIN TNC 640 CELOS 21.5" ERGOline® Control Multi-touch screen Equipment / Options Internal coolant supply 40 bar / 980 l Paper band filter Chip conveyor HEIDENHAIN TS 460 infrared measuring probe Preparation and software option for 3D quickSET MPC – Machine Protection Control Compressed air through the spindle center Oil and emulsion mist extraction system, 2 × 1,600 m³/h 2 rotating viewing windows Purge air for linear measuring systems Direct measuring systems Active cooling for main spindle and linear motor Automatic door drive Electronic handwheel IoTconnector Machine Data Connector (OPC UA / MTConnect / MQTT) NETservice Machine can be inspected by arrangement. Further information, photos and videos available on request.

Condition: used, Year of construction: 2017, We offer you: CNC Bed Milling Machine Manufacturer: DMG MORI Model: DMF 260-11 linear Year of manufacture: 2017 Control: Celos with Siemens 840D sl Operate Main spindle renewed Technical specifications: Travel distances: - X-axis travel: 2,600 mm - Y-axis travel: 1,100 mm - Z-axis travel: 900 mm Main spindle: - Speed range: 20 - 15,000 rpm - Drive power (40/100%): 46 / 30 kW - Torque (40/100%): 200 / 130 Nm - Tool holder: SK 40 Worktable: - Fixed table with integrated rotary table - Clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool stations: 60 positions - Chip-to-chip time: 7.5 s - Power-on hours: approx. 21,000 h - Operating hours: approx. 9,200 h Technical features: - ICS (internal coolant supply) 40 bar - Coolant spray gun - Rotating viewing window - Tropical package - Dynamic package Accessories: - Paper band filter 600l - Chip conveyor - Heidenhain TS 649 DMG touch probe - 3D quickSET - 2x Oil and emulsion mist separators - 4-color signal lamp - Electronic handwheel Accessories, pictured tools, and clamping devices are only included in the scope of delivery if noted in the additional information. Iodpfx Aaswtd A Nsnetl Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: excellent (used), Year of construction: 2006, Control system: Heidenhain iTNC 530 Travel ranges X/Y/Z: 2200 x 560 x 720 mm Spindle speed: 18,000 min-1 Clamping area: 2600 x 600 mm Max. table load: 2200 kg Swiveling head Coolant pressure: 25 bar Tool magazine for 30 tools, SK 40 Optional C or A axis Measuring probe: Heidenhain TS 640 Ijdpfjzg Nmkex Aanjtl Chip conveyor Paper band filter

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 21,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 1,185 mm, total height: 3,040 mm, total width: 4,100 mm, overall weight: 15,000 kg, controller manufacturer: HEIDENHAIN, controller model: Plus IT 3D CNC Pilot 4290 plus it, product length (max.): 7,800 mm, number of axes: 7, This 7-axis DMG GILDEMEISTER GMX 250S Linear was manufactured in 2008. A turn-mill centre featuring the advanced Heidenhain Plus IT 3D CNC Pilot 4290 control unit, it represents the pinnacle of turning and milling capabilities. Contact us for more information. Iodjyfv Rbjpfx Aanjtl - Guide Way Type: Roller guide ways- Main Spindle: - Drive Power (100% ED): 21 kW - Drive Power (40% ED): 28 kW - Spindle Speed Range (100% ED): 5000 rpm - Spindle Speed Range (40% ED): 5000 rpm - Base Speed: 850 rpm - Torque max. (40/100% ED): 240 / 320 Nm - Drive Type: AC/1, Integrated Spindle Motor 76 - C-Axis Speed: 5000 rpm - C-Axis Torque: 320 Nm - C-Axis Resolution: 0.001 deg - Chuck Diameter: 200 - 315 mm - Bar Capacity max.: 65 mm - Spindle Flange: Flachflansch 170 h5 - Spindle Bore Diameter: 80 mm - Clamping Cylinder Bore Diameter: 67 mm - Diameter in Front Bearing: 120 mm- Tool Spindle / Milling Spindle: - Tool Holder: HSK63-A - Spindle Speed max.: 12000 rpm - Drive Power (100% / 40% ED): 13.2 / 22 kW - Torque (100% / 40% ED): 60 / 100 Nm- Spindle 2 (Counter Spindle - option): - Drive Power (100% / 40% ED): 21 / 28 kW - Speed max.: 5000 rpm - Chuck Diameter: 315 mm - Bar Capacity max.: 65 mm- Working Range / Turning Diameter: - Swing diameter max.: 640 mm - Turning diameter max.: 520 mm - Turning diameter over counter spindle max.: 400 mm - Turning diameter over counter spindle & turret max.: 250 mm - Turning diameter over tailstock max.: 400 mm - Spindle distance: 1500 mm - Turning length (short / long): 1175 mm - Workpiece weight chuck parts (flange weight) max.: 150 (100) kg - Workpiece center of gravity from spindle flange max.: 200 mm - Workpiece weight shaft parts with tailstock max.: 800 kg- Slide Travel: - Slide 1 (top): X1 = 550 mm, Y1 = 180 mm, Z1 (short/long) = 1185 mm, B1 = 240 deg - Slide 2 (option): X2 = 180 mm, Z2 (short/long) = 1050 mm - Slide 3 (counter spindle): Z3 (short/long) = 1150 mm- B-Axis: - Swivel speed max.: 30 rpm - Torque B-Axis (S6-40%/max.): 2860 / 5720 Nm - Resolution B-Axis: 0.001 deg - Clamping hydraulic (at 30 bar): 2000 Nm- Tool Magazine: - Number of tool pockets: 36 - Tool weight max.: 8 kg - Tool length max.: 400 / Ø80 mm - Tool length max. with free space: 250 / Ø125 mm - Tool diameter standard: Ø80 mm - Tool length max. without free space: 230 / Ø80 mm - Turning tool f-dimension standard: 40 mm - Turning tool f-dimension with free space max.: 62.5 mm - Tilting moment tool standard max.: 60 (100) kg/cm - Lifting movement: 85 mm- Turret 2 (Option): - Driven Tools Equipped: Yes - Number of tool stations: 12 - Shaft diameter acc. to DIN 69880: 40 mm - Number of driven tools: 12 - Drive power (max. 100% ED): 10.7 kW - Torque (max. 100% ED): 32 Nm - Speed range: 4000 rpm - Indexing time (30/180 deg.): 0.34 / 0.64 s - Tool load max.: 100 kg - Permissible imbalance due to tool loading: 63 Nm- Feed Drives & Rapid Traverse (Schlitten 1, 2, 3): - Rapid traverse X/Ys/Z (Slide 1): 40 / 24 / 70 m/min - Feed force X/Ys/Z (Slide 1, S6-40%): 7 / 11 / 7.5 kN - Travel resolution X/Ys/Z (Slide 1): 0.001 mm - Ball screw X (Slide 1): Ø32 x 20 mm - Ball screw Ys (Slide 1): Ø40 x 15 mm - Linear motor Z1-Axis: 1FN3600-4WB00 - Rapid traverse X/Z (Slide 2): 24 / 36 m/min - Feed force X/Z (Slide 2, S6-40%): 9 / 11 kN - Rapid traverse Z (Slide 3): 36 m/min - Feed force Z (Slide 3, S6-40%): 13 kN- Coolant & Chip Conveyor: - Coolant capacity: 370 l - Drive power: 0.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer you: CNC bed milling machine Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2020 Control system: Celos with Siemens 840D sl Operate Itjdpfjz A Ap Isx Aanjl Technical data: Travel ranges: X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 46 / 30 kW Torque: 200 / 130 Nm Work table: Table clamping surface: 4,200 x 1,100 mm Rotary table: d 1,050 mm Max. table load: 1,200 kg Tool changer: Number of tool positions: 120 Tool holder: HSK-A 63 Feeds: Rapid traverse (x/y/z): 40 / 40 / 40 m/min Operating hours: approx. 23,850 h Spindle hours: approx. 11,500 h Technical features & accessories: - 5-axis simultaneous machining - NC swivel milling head (B-axis) - Integrated rotary table, arranged on the left, hydraulically clamped - Full enclosure - Coolant tank - Direct measuring systems - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter, 600 l - 2 rotating viewing windows - Purge air for linear measuring systems - Rotary coupling for spindle - Flushing gun for chip flushing - 2x oil and emulsion mist separators - Blow-off air through the spindle center - Infrared measuring probe, Heidenhain TS 460 (if available) - Preparation for 3D quickSET - MPC – Machine Protection Control - Operating mode 4 - ATC (Application Tuning Cycle) - Preparation for Hofmann dividing head RW-NC 300 (dividing head not included) - Alternating operation - Tool breakage monitoring TRS2 - Tracy surface interpolation Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is stated in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, Year of construction: 2022, functionality: fully functional, DMG MORI DMF 360/11 linear – Universal machining center, year of manufacture 2022, in excellent condition, always maintained on schedule, available for inspection at any time. Key technical data: Control system: Heidenhain TNC 640 Celos, 5 controlled axes Travel ranges: X 3,600 mm / Y 1,100 mm / Z 900 mm Rapid traverse rate X/Y/Z: 80/60/60 m/min Itodpfx Aaozv U N Nonol Spindle: 20–10,000 rpm, 44/32 kW, 288/187 Nm, SK 50 NC rotary table: 4,200 x 1,100 mm, max. table load 1,200 kg Tool magazine: 120 positions Equipment: Internal cooling 40 bar, chip conveyor, measuring probe Heidenhain TS 460, automatic doors

Condition: used, Year of construction: 2016, operating hours: 18,071 h, functionality: fully functional, machine/vehicle number: 06960000941, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, rapid traverse Y-axis: 30 m/min, torque: 280 Nm, input voltage: 400 V, overall weight: 6,000 kg, power: 25 kW (33.99 HP), input frequency: 50 Hz, controller manufacturer: Siemens, controller model: Sinumerik 849D sl, input current: 63 A, tool type: VDI 40, number of axes: 3, DMG MORI CTV 250, 2nd Generation – Vertical Turning Center (Pick-up), Year of Manufacture 2016 For sale is a well-maintained DMG MORI (Gildemeister) CTV 250, 2nd Generation, manufactured in 2016, with only 18,071 spindle hours. The machine is fully equipped for automated series production of chucked parts and is currently still powered on – inspection and demonstration possible by arrangement. Control System & Drive Siemens Sinumerik 840D sl (Slimline) including ShopTurn option AC main drive 25 / 32 kW, torque 280 / 360 Nm Spindle speed up to 5,000 rpm, duty cycle 100 % / 40 % Hollow cylinder, programmable clamping pressure via NC program Axes & Tools 12-station turret (disc diameter 340 mm), all stations powered (UDI 40) C-axis with powered tool system Y-axis +90 / -65 mm Linear guides, ball screws, glass scales, AC servomotors with absolute encoder Rapid traverse 30 m/min Automation & Metrology Workpiece transport system SRA 160 (drag chain, NC-controlled) including drag chain set Storage capacity: 30 parts (Ø 30–70 mm, max. 7 kg) or 18 parts (Ø 30–100 mm, max. 15 kg), max. total weight 320 kg including pallets Workpiece diameter 30–160 mm, workpiece height max. 160 mm Robot interface Profinet (electrical interface for 6-axis robot) Workpiece probe Renishaw LP2DD at the loading/unloading station, measuring accuracy 10 µm, with air blow cleaning Coolant & Peripherals Coolant system 8 / 20 bar, tank 600 l, high-pressure pump 20 bar / 40 l/min Coolant supply via turret disc to all stations Itjdpfx Ajzi R R Noanol Band filter system 40 µm with forced indexing, coolant level monitoring Hinged belt chip conveyor with extended discharge chute (+300 mm), enlarged chip container, modified sludge pump Aluminum machining package Integrated work area extraction max. 400 m³/h, work area flushing with 3 flushing nozzles Cabinet cooling up to 40 °C, hydraulic oil cooler Air blower via main spindle, 4-color signal light Remote diagnostics via the internet Connection values: 400 V / 50 Hz, 40 kVA, 63 A · Weight: approx. 6,000 kg Sale from current location, dismantling/loading/transport by arrangement or by the buyer. Sale is subject to the exclusion of all warranties (commercial sale of used machines, sold as seen). Please contact us if you have any questions or would like to arrange a viewing.

Condition: used, Year of construction: 2014, operating hours: 43,665 h, functionality: fully functional, machine/vehicle number: 15175183874, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, operating hours of spindle: 17,437 h, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, 5-Axis Traveling Column Milling Machine DMG MORI DMF 180-7 | Year of Construction 2014 | B-Axis & Integrated Rotary Table For sale is a high-precision 5-axis traveling column milling machine from the manufacturer DMG MORI, model DMF 180-7, from the year 2014. The machine is extensively equipped and features a B-axis (swivel head) and a rotary table integrated into the fixed table for complex machining operations. General Machine Data Iodpfx Aaezyplgenjtl * Manufacturer: DMG MORI * Model: DMF 180-7 * Year of Construction: 2014 * Machine Number: 15175183874 * Operating Hours: 43,665 h * Spindle Hours: 17,437 h * Machine Weight: approx. 13,250 kg Working Area & Dynamics * X-Axis: 1,800 mm * Y-Axis: 700 mm * Z-Axis: 700 mm * Rapid Traverse: 40 m/min * Acceleration: 4 m/s² Control System * Type: 3D Control Siemens SINUMERIK 840D sl * Control Panel: ERGOline Control with 19" screen * Software Options: Surface interpolation TRACYL, COMPCAD compressor function (for HSC machining), 3D machining/tool correction, turning-milling cycle Spindle & Milling Head (5-Axis Configuration) * Head: Swivel head (B-axis) * Speed: 20 to 14,000 rpm * Spindle Power: 18.9 / 14 kW (40/100% ED) * Tool Clamping: SK40 according to DIN 69871 Tool Table * Design: Fixed table with centrally integrated rotary table * Clamping Area Fixed Table: 2,100 x 700 mm * Rotary Table Diameter: 750 mm * Max. Load Capacity Rotary Table: 500 kg Tool Changer * Magazine Capacity: 60 positions SK40 * Type: Chain magazine with dual gripper * Chip-to-Chip Time: 7.6 s Coolant, Disposal & Extraction * Internal Coolant Supply (ICS): 40 bar / 980 l system with paper band filter * Chip Disposal: Chip conveyor (drag chain) * Extraction: Oil and emulsion mist separator (1,600 m³/h) * Additional Functions: Air blow through the spindle center (via M-function), coolant gun for chip flushing Additional Equipment & Measuring Technology * Measuring Probe: Infrared measuring probe TS649 DMG * Kinematic Measurement: Preparation for 3D quickSET Toolkit * Cabin: Full cabin with operating mode 4 From an insolvency proceeding, sale in open auction. Offer deadline until September 30, 2026, 6:00 PM. Package price for several machines from this proceeding is possible. Inspection: September 16, 2026, 10:00 AM – 12:00 PM, Fraunhoferstraße 10–12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM – 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH website under Auctions.

Condition: used, Year of construction: 2019, operating hours: 17,324 h, functionality: fully functional, machine/vehicle number: 06990000471, spindle speed (max.): 5,000 rpm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, input voltage: 400 V, overall weight: 6,500 kg, input frequency: 50 Hz, controller manufacturer: Siemens, controller model: 840d sl, For sale is a used DMG CTV 250 vertical turning center in good condition and ready for operation. The machine is equipped with driven tools, allowing for the economical complete machining of complex workpieces. Itsdpezg Dy Ejfx Aanel The scope of supply also includes a parts conveyor belt with 30 shuttles for automated workpiece transport and efficient series production. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 8086010539B, spindle motor power: 5,500 W, spindle speed (max.): 6,500 rpm, spindle bore: 46 mm, type of input current: three-phase, bar passage: 42 mm, bar diameter (max.): 42 mm, overall weight: 4,700 kg, DMG Gildemeister Sprint 42 linear CNC turning center with FANUC 160i control and IEMCA Boss 545-E bar feeder. The machine is a compact and productive CNC twin-spindle turning center for the series production of bar stock parts up to 42 mm in diameter. Thanks to its main spindle, counter-spindle, 6 linear axes, 2 channels, and powered tools, the machine is particularly suitable for precise turning, drilling, milling, and complete machining operations in medium to high volumes. The machine is available including the bar feeder and chip conveyor. On-site inspection is possible by arrangement. Machine data: Manufacturer: DMG / Gildemeister Italiana Model: Sprint 42 linear Machine No.: 8086010539B Year of manufacture: 2008 Control: FANUC 160i User interface: DMG SlimLine / TFT 15" Spindles / C-axes: 2 Number of axes: 6 Number of channels: 2 Max. bar diameter: 42 mm Main spindle max. speed: 6,500 rpm Counter spindle max. speed: 6,500 rpm Installed power: 40 kVA Operating voltage: 400 V / 50 Hz Base machine weight: approx. 4,700 kg Travel distances: X1: 65 mm Y1: 350 mm Z1: 120 mm X2: 265 mm Y2: 326 mm Z2: 320 mm Spindle data: Main spindle: Max. bar diameter: 42 mm Guide bushing bore: 46 mm Ijdszkh Iujpfx Aanjtl Max. speed: 6,500 rpm Nominal power: 5.5 kW Nominal torque: 37.5 Nm Counter spindle: Guide bushing bore: 38 mm Max. speed: 6,500 rpm Nominal power: 3.7 kW Nominal torque: 19.6 Nm Bar feeder: Manufacturer: IEMCA Model: Boss 545-E Type: 32 LL Year of manufacture: 2007 Serial No.: 020722GA10 Weight: approx. 860 kg Voltage: 400 V / 50 Hz Compressed air: 6 bar Weight: 860 kg Location: Bocholt Availability: immediately available Inspection: possible by arrangement Loading / Transport: for collection

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,904 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, controller manufacturer: MITSUBISHI, controller model: M730UM, number of slots in tool magazine: 12, number of axes: 5, This 5-axis DMG MORI MORI NLX 2500/700 SY was manufactured in 2023. It features a turning length of 700 mm and a powerful main spindle with a maximum speed of 4,000 rpm. The machine is equipped with a 12-station turret and integrated automation for efficient parts handling. If you are looking to get high-quality turning capabilities, consider the DMG MORI MORI NLX 2500/700 SY horizontal turning machine we have for sale. Contact us for further details. Itjdpfszy N Nlsx Aanol - Control Unit: MITSUBISHI M730UM with CELOS (MAPPS V) on 21.5-inch Multi-Touchscreen ERGOline Touch- Turning Length: 700 mm- Main Spindle (Spindle 1): 18.5/18.5/15 kW (25% ED/50% ED/cont.), 4,000 rpm, JIS A2-8 spindle nose, Ø91 mm spindle bore- Main Spindle Chuck: 10" Hydraulic 3-jaw chuck (Kitagawa BR10A821, Ø254 mm) with hollow clamping cylinder (Ø80 mm bar passage)- Counter Spindle (Spindle 2): 11/7.5 kW (25% ED/cont.), 6,000 rpm, JIS A2-5 spindle nose, Ø43 mm spindle bore- Counter Spindle Chuck: 6" Hydraulic 3-jaw chuck (Kitagawa BR06A521E, Ø170 mm) with full clamping cylinder- Turret: 12-station BMT60 turret with 10,000 rpm driven tools (5.5/5.5/3.7 kW power, 40/30/14 Nm torque)- Y-Axis Travel: ±50 mm (Rapid traverse 10 m/min)- X-Axis Direct Measuring System: Magnetic linear scale system (0.01 µm resolution)- Tool Setter: Manual swing-type tool presetter for Spindle 1 and removable tool presetter for Spindle 2- Automation & Parts Handling: Integrated parts catcher for main/counter spindle (up to Ø80 mm x 200 mm, 3 kg max), workpiece discharge conveyor belt, pneumatic workpiece ejector (Spindle 2)- Bar Feeder & Interface: Bar feeder interface (multi-brand) with Top Automazioni X-Files 380M 3m bar feeder (80 mm max bar diameter)- Coolant & Filtration System: Hinge-belt chip conveyor (right side discharge), 0.8 MPa high-pressure coolant pump, INTERLIT pump unit with 15 bar high-pressure pump & double cartridge filter, coolant gun- Auxiliary Equipment & Interfaces: Oil mist collector interface (Ø150 mm port), 3-phase autotransformer (45 kVA, 400V/200V, 50 Hz), double foot switch for chuck operation- Machine Operating Hours (from HMI readout):- Machine Power-On Time: 8,120 hours- Program Run Time Head 1: 3,751 hours- Cumulative Cutting Time Head 1: 1,904 hours Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2013, operating hours: 10,322 h, functionality: fully functional, machine/vehicle number: NL254130510, We are offering this used DMG MORI NLX 2500 SY/700 CNC turning and milling center, manufactured in 2013, complete with a short bar loader magazine ILS-MKU 70/100, manufactured in 2015. Turning diameter max. 366 mm Turning length 705 mm Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 3,500 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A-8 Spindle bearing diameter 140 mm Spindle bore 90 mm Max. usable bar diameter 80 mm Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle nose JIS A2-5 Spindle bearing diameter 85 mm Spindle bore 43 mm Max. usable bar diameter (-) mm X-axis travel 260 mm Z-axis travel 795 mm Y-axis travel +/- 50 mm Rapid traverse (X / Y / Z) 30 / 10 / 30 m/min Number of tool positions 12 Tool holder BMT 60 Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 3.7 kW Total power consumption 40 kVA Machine weight approx. 6.4 t Short bar loader magazine ILS-MUK 70/100 Type: MUK 10016-II Year of manufacture: 2015 Material diameter: 6-100 mm Material length: 250-1650 mm Length: 2400 mm Width: 1600 mm Outreach: 330 mm Weight: approx. 680 kg If you have any questions or require further information, please feel free to send us a message or call us. Itjdpfxjzwvv Ts Aanol

Condition: used, Year of construction: 2022, x-travel 2.600 mm y-travel 1.100 mm z-travel 900 mm control 840 D sl Celos Siemens Iodpfx Aaszqvmxjnetl turning speed range - main spindle 20 - 20.000 min/-1 power capacity - main spindel 35 kW max. Torque 120 Nm tool taper SK 40 DIN 69871 swivellable B: +/- 100 ° table surface area 3.200 x 1.100 mm max. table load 4.000 kg max. workpiece height 972 mm rotary table dia. 1.050 mm C-Axis 360 ° max. workpiece weight 1.200 kg number of toolpositions 120 pos. tool taper SK 40 DIN 69871 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power XYZ: 12 / 10 / 12 kN total power requirement 68 kVA weight of the machine ca. 28 t dimensions of the machine ca. 9,0 x 6,0 x 3,3 m 5 Axis CNC - Travel Column Milling Machine DMG-MORI - DMF 260 11 - Swivel-Millinghead (B-Axis) - NC rotary table (C-axis) - only approx. 4,930 spindle hours - only approx. 15,000 power-on hours - WITHOUT clamping devices, WITHOUT tools

Condition: like new (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, total height: 3,300 mm, total length: 9,000 mm, total width: 6,000 mm, overall weight: 28,000 kg, number of slots in tool magazine: 60, Equipment: chip conveyor, 5-axis machining centre DMG DMF 260-11 Year of manuf. 2012 Control Heidenhain iTNC 530 Speed [rpm] 10000 Movement X/Y/Z [mm] 2600/1100/900 Tool holder SK50 Ijdpfezucm Hjx Aanjtl Spindle Speed 10.000 U/min Power 44 kW Torque 288 Nm Taper SK 50 Media feed-through Blast air, Coolant 4. NC-Axis Technologie NC-Swicel head Stroke +/- 100° Clamping Hydraulic 5.NC-Axis Technolgie NC-Round table Stroke 360° Diamenter 1.050 mm Clamping Hydraulic Load capaity 1.200 kg Tool magazin 60 stations Rapid travers 40 m/min Chip managment Chip conveyor Coolant mangament Coolant through spindle, 80 bar Positioning sensor Direct scale in all Axis Workpiece measurment Touch probe, Heidenhein TS 649 Oil mist seperator: Media feed-through spindle Blast air, Coolant Process observation Operation mode 4

Condition: used, DMG HSC 55 linear is a 5-axis machining center with high precision, superior accuracy and reliability. Travels X450 mm, Y650 mm, Z460 mm; A -10/+110°; tool magazine 120 places; tool Ø 80 mm; tool length 250 mm; max tool weight 6 kg; spindle taper HSK63. Spindle 2–28000 t/min, spindle power 38/28 kW; 50Hz 3x400 V; total installed power 70 kVA; machine weight ≈9500 kg; overall dims L3210×W2930×H2900 mm. Delivers tight tolerances; typical for automotive, aerospace, medical, watchmaking and machine-tool manufacture. Itodjzv Nh Topfx Aanel

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Itsdpfxjzy Hx Do Aanel Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Condition: good (used), Year of construction: 2015, Ref. -No.: 10647 Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2015 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany Serial no.: 2903XXXX Machine-No.: 591XX X-Travel: 3600 mm Y-Travel: 1100 mm Z-Travel: 900 mm Max. Workpiece Weight: 8000 kg Max. Tool Weight: 5 kg Max. Tool Length: ab Spindelnase 300 mm Workpiece Diameter With 2 Vacant Positions: 130 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 120 Itodpfxszc D Hfs Aanol Tool changer: 60 Spindle Speed: 20000 RPM Max. Torque: 288 / 187 Nm Rapid Travel X/Y/Z: 80 x 60 x 60 mm / min Main Drive: 35 / 25 kW Internal cooling: 40 bar coolant reservoir: 600 L. Further information: - Fixed table, often with an integrated NC rotary table (FD version) - Spindle: Standard speed is typically 10,000 rpm; more powerful variants are available as an option - Traveling column design: Ideal for pendulum machining and long workpieces - Stability: The mineral cast machine bed ensures high damping and precision - 5-axis: Usually equipped with an NC swivel milling head (B-axis) The machine can be viewed while powered on by appointment.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 02260005181, overall weight: 6,500 kg, CNC turning machine Manufacturer: Gildemeister Type: CTX 420 Linear V4 Machine No.: 02260005181 Iodpfxozvmhdo Aanotl Year of manufacture: 2005 Control system: Siemens 840D ShopTurn Swinging diameter: 680 Chuck diameter: 250 Drive power 40/100% duty cycle: 37/25 kW Speed range: 20-5000 rpm Weight approx.: 6500 kg - 12-position turret - VDI 40 - C-axis - Y-axis - Driven tools, 12 stations - Chip conveyor - Tailstock - SMW Autoblok 250 BH Subject to change without notice.

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe BLUM Tool Measuring system 3D Quick Set Itjdpfx Aasw Hxiwonjl Application Tuning Cycle Air Blast through spindle Super Fine filter system c/w tooling ----- Clearance Sales -----

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Precision machining center HSC 30 linear 5 axes Siemens 840D Travel range X/Y/Z 320 /300 /280 mm B-axis: +/- 120° C-axis: 360° Rapid traverse rate 50 m/min Spindle speed range 0 - 40,000 rpm AC main drive with 19.5/15 kW and 16/12 Nm Incl. spindle cooling and rotary union Tool holder HSK-E 40 according to DIN69893 Linear axis drive package Tool magazine, 30 positions, double gripper Active cooling unit for main spindle and linear drives Itsdpfxszlhmms Aanol Direct absolute linear encoders 3D control Quick-change system EROWA ITS 150 Measuring probe Blum TC 52 Blum laser Interface for handling system EROWA IKZ 40 bar Electronic handwheel Coolant gun Compressed air Production package EROWA Robot Compact 80 50 pallet positions for ITS 148

Condition: good (used), Year of construction: 2005, Universal machining center Machine type: DMG DMU 50 Evo linear Control: Heidenhain iTNC 530 Year: 2005 SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 500 mm Y-Axis: 450 mm Z-Axis: 400 mm B-Axes: 108° C-Axis: 360° Rapid motion: (X/Y/Z): 80 / 50 / 50 m/min. Amount of controlled axes: 5 Spindle speeds: 18.000 rpm Tool: SK 40 Toolchanger Tool capacity: 30 NC-panning and rotary Table Table size: 500 x 380 mm Power consumption: 52 kVA KW Machine weight: 6,5 kg Req. space (LxBxH): 5,4 x 6,5 m Equipment No cooling through spindle No chip conveyor: Spänewanne Caliper Working mode: 4 Itodpfx Aaezi Dzhjnsl

Condition: used, Year of construction: 2012, operating hours: 20,000 h, machine/vehicle number: IntNr231536, High-end CNC turning centre with 2 turrets, 2 Y-axes and IRCO bar feeder Control: SIEMENS 840D SolutionLine with ShopTurn interface Year of manufacture: 2012 Spindle hours: 20,000 Maximum turning diameter: approx. 390 mm Maximum turning length: 1,250 mm Bar capacity: 76 mm (standard) X-axis travel: 300 mm Z-axis travel: 1,250 mm Y-axis travel: +/- 60 mm (both turrets) Spindle specifications: Speed: up to 5,000 rpm Drive power: 34 kW (40% duty cycle) Torque: up to 380 Nm 4-axis kinematics 2 x 12-position turrets (all stations suitable for driven tools) Speed up to 6,000 rpm, power 11.3 kW Gear cutting software, including specialised tool holders for gear hobbing/cutting. IRCO MUK short bar loader Ijdpfx Ajzx Rwzsanotl Hinged belt chip conveyor 20 bar high-pressure coolant system with paper belt filter Subject to prior sale. Specifications subject to change and errors excepted!

Condition: used, Year of construction: 2024, x-travel 400 mm y-travel 400 mm Itjdpezvhm Iofx Aanel z-travel 375 mm control Siemens 840D sl Linear