Used Mitre Saw Machine for sale (68,731)

Condition: used, Year of construction: 2016, saw blade diameter 360 mm cutting width at round material 15 - 100 mm cutting width at rectangle material 15 - 80 mm cutting speed 17 - 175 m/min Control Easy Control KASTO total power requirement 21 kW Nlodpfx Aajv Nq Rmjasa weight of the machine ca. 3,4 t dimensions of the machine ca. 3,3 x 1,6 x 2,2 m The saw blade drive gearbox was renewed in 03/2023 by the manufacturer Material feed Material discharge Chip conveyor

Condition: new, Saw shaft and saw bush Nlodpfx Aonladhjaaea Tool shaft and clamping bush

Condition: used, Year of construction: 1991, saw blade diameter 275 mm Njdpfx Asx Avtvsaajla cutting diameter 90 mm cutting speed 80 m/min EISELE Miter Circular Saw VMS 120 Saw blade diameter: 275 mm Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 75 × 75 mm Cutting capacity at 45° miter (rectangular): 75 × 75 mm Saw blade speed: 40 / 80 rpm Drive motor: 380 V, 1 / 1.2 kW Required floor space: 700 × 600 × 1580 mm Weight: approx. 180 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 9000x1400x1680 mm Weight 1600 kg Njdpfx Aaev A E Ndeaola Total power requirement 7,5 kw - Max process length 2.5 m (Can be customzied)- Max process width 200 mm -Min process width 30 mm- Max process thickness 1O0 mm (Can be customzied)- Saw blade 405/120/30/3 , 455/120/30/3 mm- Spindle motor 7.5 KW / 400 V- Machine size 9000 mm x 1400 mm x 1680 mm- Machine weight 1600 kg

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Machine in stock Configuration: - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop - Cylinder blocking involuntary head lowering Nedopl Tgmjpfx Aaajla - Double working pressure servo-controlled in low pressure - 1 pneumatic vertical vice - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers - Worktable and turntable structure in stabilized cast iron - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system - Integral blade guard in rest position - Set up for the extraction of chips and fumes

Year of construction: 2024, condition: new, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Machine in stock and ready for shipping Equipment: Nlodpfx Ajd Izq Hsaaea - No.2 carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support - Chip conveyor belt - Label printer - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Condition: like new (used), Year of construction: 2019, functionality: fully functional, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Year: 2019 Condition: excellent, as new Equipment (standard + options): - No.2 carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit Nledpfxewk R A Do Aaaoa - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support - Chip conveyor belt - Label printer - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Condition: used, Year of construction: 2004, cutting width max. 700 mm Nsdox Eblvepfx Aaaola Cutting height max. 120 mm saw-blade dia. max. 700 mm

Condition: used, Year of construction: 2022, Cutting height 260 mm sawing motor 7,5 kW saw-blade dia. 500 mm feed max. 250 m/min Nedjx Ditfepfx Aaaela

Condition: used, cutting width max. ca. 600 mm Nlodpfexrtzpox Aaaea Cutting height max. ca. 120 mm feed pneumatisch m/min

Condition: used, cutting length ca. 2.200 mm mitre angle 45° - 90° workpiece max. 50 x 70 mm Nledpfow D Dfxjx Aaaea

Condition: used, cutting width 380 mm Nodpfxjwqphlj Aaaela Cutting height 85/40 mm machine weight ab. 50 kg Combined pull-through and table saw Graule AGT. The pull-through saw can be tilted and swiveled. The machine can also be used as a pull-through saw only by removing the table.

Condition: used, Year of construction: 1992, Used machine Nsdpfx Aeykvw Sjaaela Year of manufacture: 1992 Equipment and technical data: - Swivels both sides up to 45° - Saw blade tiltable to one side up to 45° for vertical mitre cuts - Motor: 2 kW, 400 volt, 2800 rpm - Saw blade diameter: 300 mm - Extraction connection diameter: 75 mm - Cross cuts: 380 x 85 mm - Mitre cuts, saw blade vertical, 45° swivel to left or right: 265 x 85 mm - Mitre cuts, vertical, saw blade tilted 45° to the left: 380 x 60 mm Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1999, power: 3 kW (4.08 HP), input voltage: 400 V, cutting height (max.): 200 mm, saw blade diameter: 520 mm, overall weight: 350 kg, cutting length (max.): 420 mm, mount diameter: 50 mm, saw drive: 3,000 W, No. 04511 Nlsdsyh Nfujpfx Aaaea Crosscut and mitre saw Graule ZS 200 N Used, year of construction 1999 Saw can be swiveled and tilted 3 kW three-phase brake motor 400 V Saw blade diameter 520 mm Saw blade holder 50 mm Cutting height 200 mm Saw blade tilted to 45°: Cutting height 140 mm Cutting length 420 mm Table dimensions 900 x 700 mm LW Aluminium fence back With machine stand and hand crank at the rear for tilt adjustment Hydraulic feed brake Pneumatic material clamping on both sides from above Saw blade spray device for coolant or lubricant Carbide circular saw blade for aluminium and plastics, diameter 520 mm Roller conveyor type RLK 4000 mm, with fold-away material fence and scale Roller conveyor 4000 mm long after the saw Roller conveyor width 350 mm Transport dimensions machine approx. 1650 x 1200 x 1850 mm LWH, roller conveyors approx. 4500 x 400 x 1950 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2023, functionality: fully functional, Equipment features: - Sliding carriage made of anodized aluminium, incl. high-precision guide made of hardened and ground steel - Sliding carriage lock in any position - Saw blade guard with swing-away device - Extension arm with adjustable angle stop with length compensation every 5° and at 22.5° - Mitre fence and eccentric clamp - Belt adjustment for speed change from above (opening in the saw table) - Indicator lights for set saw blade speed - 3-axis programming unit via TFT 15'' touchscreen on Windows basis, incl. 2,500 program slots, 2 USB ports and 1 Ethernet network connector - Scoring unit with electromotive height adjustment and motorized axial pulse adjustment, including digital display for height and width and width - Angle stop with 3 stop riders; 2 riders with digital display, 1 rider analog but coupled to a digital rider also digitally adjustable - Upper control panel incl. automatic star-delta start - Electrics and safety devices according to CE standard Technical data: - Saw blade inclination: 0° to 45 - Table dimensions: 1,030 x 680 mm - Working height: 870 mm - Sliding carriage dimensions: 3,200 x 400 mm - Cutting length with scoring unit: 3,420 mm Nodpferrw Ucjx Aaasla - Cutting width at rip fence: 1,300 mm - Max. Cutting height with 500 mm saw blade: 90°: 177 mm / 45°: 133 mm - 3 speeds: 3,000 / 3,600 / 4,200 rpm. - Motors: Main saw: 7.5 kW / 10 HP / 50 Hz, scoring saw: 0.55 kW / 0.75 HP - Noise level according to EN 27960: 84.4 - 2565086.3 dB(A) - Extraction nozzle 1 x 120 mm, 1 x 100 mm - Angle fence extendable to 3,400 mm

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Electronic X-axis control X-axis positioning speed (m/min) 25 Pneumatic head tilting External tilting 45° / 22° Mechanical adjustment of intermediate angles Nedpfx Asyv Ag Sjaajla Hydropneumatic blade feed Usable cutting length (mm) 5,000 Minimum standard cut with 2 heads at 90° (mm) 310 Blade diameter (mm) 450 Contact probe

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002 Nlodpfxetv Rgrs Aaasa

Condition: new, Year of construction: 2026, power: 4 kW (5.44 HP), input voltage: 400 V, type of input current: three-phase, total height: 34 mm, total length: 2,350 mm, total width: 1,250 mm, overall weight: 1,250 kg, table height: 600 mm, coolant pump power: 60 W, cutting range round steel at 90°: 400 mm, cutting range square steel at 90°: 400 mm, saw band length: 4,650 mm, saw band width: 1 mm, ROGI SAWING MACHINE TYPE WDS-400 SEMI-AUTOMATIC Saw blade size ----- 4650 x 34 x 1.1 mm Sawing speeds ----- 19/30/50/65/90 m/min. Motor power ----- 4 kW - 400V - 3 phase Weight ----- 1250 kg Cutting capacity ----- 400 mm / 500W x 400H mm INCLUDES Bimetal band saw blade Workpiece stop Saw blade guide with carbide inserts Hydraulic clamp Coolant pump Hydraulic downfeed cylinder Motor protection switch Automatic end stop Nljdpfox N Iawox Aaaja

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, cutting range round steel at 45°: 450 mm, cutting range round steel at 90°: 450 mm, cutting range square steel at 45°: 420 mm, cutting range square steel at 90°: 450 mm, saw band length: 5,780 mm, saw band width: 41 mm, Semi-automatic sawing machine with 1-sided miter. (Also available with 2-sided miter.) Hydraulically operated material clamp. Hydraulically operated saw frame. Brand: KMS Type: KMY DG 450 Saw motor: 3 kW Height of support table: 888 mm Max / Min clamp opening: 0 / 740 mm Clamp height: 240 mm Mitre: 1 side Down speed: Continuously adjustable Cutting speed: Continuously adjustable, 20 - 90 m/min Band dimensions: 5780 x 41 x 1.3 mm Weight: ± 1600 kg Capacity: 90° (right angle): Round: Ø 450 mm Square: 450 x 450 mm Rectangle: 450 x 680 mm 60°: Round: Ø 450 mm Square: 450 x 450 mm Rectangle: 450 x 570 mm 45°: Nljdpfxovy Swis Aaaoa Round: Ø 450 mm Square: 420 x 420 mm Rectangle: 350 x 480 mm 30°: Round: Ø 350 mm Square: 330 x 330 mm Rectangle: 240 x 450 mm Incl. 2 short roller tracks. (not shown)

Condition: new, The TITAN 43/20 CD+E firewood processor with joystick control cuts logs with a maximum diameter of ø 43 cm using a harvester bar and splits them with a splitting force of 20 tons. This is a combination machine (electric and PTO connection). Demonstration and inspection by appointment possible – the machine is currently in stock and available immediately. Warehouse clearance – special price – interim sale reserved. Nsdjtrmg Hopfx Aaaela

Condition: good (used), Alber sharpening machine for band saw blades Nlsdpfjglui Ajx Aaasa saw blade width 50 - 206mm tooth pitch 20 - 50mm

Condition: excellent (used), Fully automatic band saw graderOppligerType PBS 860 Nljdpfxjd Sr Sie Aaaja

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit Nlsdju Rv Ttepfx Aaaja -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 35 kg Nedpovz Hvcofx Aaaela Total power requirement 0 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Nodpovz Hu Sefx Aaaela Weight 35 kg Total power requirement 0 kw