Used Saw Blade Sharpening Machine for sale (66,792)

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Bandsaw grinding machine Hjdpewd N Dajfx Aqtsr Risstaler riv Rivo 200 GA Year of manufacture 1984 Various tooth shapes available Operating instructions included Feed rate 30 or 60 teeth per minute

Condition: excellent (used), for grinding saw blade diameters from 30 up to max. 300 mm Grinding wheel diameter 150 mm, lots of accessories good, well-maintained condition Operating manual is available Hedpfx Aozntwpjqter

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, VOLLMER CHX840 circular saw blade sharpening machine Hodpezpg Ukefx Aqtor Machine manufactured in 2022 Automatic sharpening of the face and back of blades from 80 to 840mm Operation with oil and reinforced pump Oil mist extraction Manual extinguishing system Grated floor tray under the machine Chisel sharpening device Multi-faceted tooth geometry program (free programming) Automatic acoustic zero-point detection system Face grinding wheel, back grinding wheel, centering rings, automatic blade support Transportation, delivery and training available

Condition: excellent (used), saw blade diameter 20 - 400 mm workpiece-spindlehead motor 0,1 kW grinding wheel diameter 150 x 30 mm Hsdpfxezlkycj Aqtsr total power requirement 0,4 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,6 x 0,4 x 1,2 m

Condition: good (used), Alber sharpening machine for band saw blades Blade width 50 - 206mm Tooth pitch 20 - 50mm Hsdpfx Aqsglui Astjr

Condition: reconditioned (used), functionality: fully functional, Refurbished sharpening machine for carbide-tipped circular saw blades. Blade diameter up to 600 mm. Hydraulically controlled. Hedpezmhd Uefx Aqtjr Equipped with a cooling system, pump, and tank.

Condition: used, Year of construction: 1985, RIVO Risstaler R200 GA Saw Blade Sharpening Machine, year of manufacture 1985 Grinding wheel diameter: 200 mm Grinding wheel bore diameter: 25 mm Maximum tooth pitch: 50 mm Maximum tooth height: 25 mm Grinding angle: 0-30 degrees Maximum blade height: 190 mm Minimum blade length: 900 mm Motor power: 0.65 kW Feed motor: 0.12 kW Supply voltage: 400 V Overall dimensions: 251 x 90 x 163 cm Weight: 530 kg Hedpszl N Irjfx Aqtsr Immediately available - fully functional Location: Austria, near St. Pölten

Condition: used, Year of construction: 1955, saw blade diameter 70 - 230 mm sawblade width 12 mm hole of sawblade 10 - 50 mm grinding wheel diameter 120 mm grinding wheel width 6 mm grinding wheel hole diameter 32 mm no. of teeth 30 - 400 Hjdpfxstqqk Ne Aqtor total power requirement 0,33 kW weight of the machine ca. 350 kg dimensions of the machine ca. 0,80 x 0,70 x 1,70 m

Condition: used, Technical details: grinding wheel diameter: 240 mm saw blade diameter: 600 mm total power requirement: 1,1 + (0,37 kW) kW weight of the machine approx.: 600 kg Saw Blade Sharpening Machine Machine performs grinding process automatically saw blade continue to move automatically grinding wheel diameter: max.: 240 mm Hodpfx Aeu Ng Edoqtor driving motor for feed (0,37 KW) *

Condition: used, Year of construction: 1980, Technical details: rpm spindle (continous): 2000 - 2500 U/min double strokes/min.: 25; 37; 50; 75; 100 H/min. Grinding-wheel diameter: Ø 250 mm work height max.: 1350 mm total power requirement: 2,7 kW weight of the machine ca.: 1,0 t dimension machine xH: 0,85 x 1,0 x 1,8 m Hsdpeu Ng I Eefx Aqtsr Use for medium to larger metal circular saws from 250 - 1450mm. Saw blade attachment Ø 60 to Ø 80mm and shaft Ø 31,5mm Tooth pitch up to 42mm Tooth depth adjustment via scale Front cutting tooth: can be chamfered on both sides up to 45° and overcut at pitch 0.02mm *

Year of construction: 1992, condition: used, Vollmer Hodpfxskmnyfo Aqter Saw blade sharpening machine Type NS 700 Year of manufacture: 1992

Condition: good (used), Year of construction: 1975, Schmid saw blade sharpening machine Saw blade sharpening machine type AS 4 for circular saw blades diam.: 20 - 400 mm for circular cut-off saws up to diam.: 550 mm tooth pitch up to: 22 mm with dividing disk: 28 mm Saw blade width up to: 6.0 mm Grinding wheel diam.: 150 mm Grinding wheel speed: 3500 rpm. Infinitely variable speed control: 70 - 200 rpm. Drive power: 0.55 kW - Base frame - Grinding wheel - accessories Hodpfx Aqoq S Uwbjtor used

Condition: used, Year of construction: 1974, Technical details: total power requirement: 1,65 kW Hsdpfxjwqplke Aqtor weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! *

Condition: excellent (used), functionality: fully functional, Schmidt Tempo EC 500 Saw Blade Sharpening Machine for SHARPENING and RE-TOOTHING of HSS and segmented circular saw blades, including beveling the teeth on the top/bottom. Diameter: approx. 20 - 500 mm Saw blade thickness: max. 6 mm Working speed: approx. 40-100 teeth / min. Grinding wheel diameter: max. 200 mm Number of teeth: 20-999 (electronically selectable) Tooth shapes: Angle tooth A, AW, curved tooth B, BW and C according to DIN 1840 (electronically selectable) Adjustment options: - Tooth shape (electronically selectable) - Number of teeth (electronically selectable) - Automatic feed - Automatic dressing device - Free grinding (electronically selectable) - Oscillating grinding (electronically selectable) - Circular grinding (electronically selectable) - Re-grinding segments - Setting the direction of rotation (electronically selectable) - Halving the number of teeth (electronically selectable) for beveling the teeth - Adjusting the tooth height difference - With LED display - Error message display Included accessories: - Noise protection hood - 10 grinding wheels of various widths - small, medium, large saw blade arbor (60, 120, 180 mm diameter) - small, large grinding wheel arbor (80, 120 mm diameter) - 1 set of standard reducing rings 16 x 20, 22, 27, 32, 40, 50 mm - Saw blade support - Operating manual, wiring diagrams Weight: approx. 880 kg Connection power: 2.5 kW Hodehua E Djpfx Aqtor Connection voltage: 400 V Paint: Green Machine is in very good original condition and can be inspected/tested while powered. Machine is sold with a 100% functional guarantee upon delivery! Spare parts/accessories can be supplied if required. Errors and prior sale excepted.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1100xx750x1380 mm Hedovz Htnepfx Aqtor Weight 450 kg Total power requirement 0,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x780x1500 mm Hodsvz Htuopfx Aqtor Weight 500 kg Total power requirement 2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x930x1500 mm Weight 700 kg Total power requirement 1,65 kw Hjdpfxev A Hgqe Aqtor

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1500x2100 mm Hodpsv A Hg Dofx Aqtor Weight 800 kg Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 29 kg Total power requirement 0,25 kw Hsdpfov A Hhhex Aqtor

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1100x1500x2100 mm Hsdpfjv A Hgwox Aqtor Weight 800 kg Total power requirement 3 kw

Condition: excellent (used), Year of construction: 2019, operating hours: 19,200 h, functionality: fully functional, machine/vehicle number: 90514 2019, saw blade diameter: 710 mm, tooth pitch: 55 mm, grinding wheel diameter: 200 mm, total width: 2,662 mm, total length: 2,540 mm, total height: 2,640 mm, type of input current: AC, input current: 10 A, input frequency: 50 Hz, disc diameter: 200 mm, grinding wheel bore: 32 mm, grinding spindle motor power: 3,000 W, saw blade width: 8 mm, input voltage: 400 V, overall weight: 3,200 kg, saw blade bore: 80 mm, power: 10 kW (13.60 HP), grinding diameter: 710 mm, workpiece diameter (max.): 710 mm, Equipment: rotational speed infinitely variable, CNC saw blade sharpening machine with chip divider grinding device and saw blade magazine up to D=560mm for unmanned operation. In manual mode: 40-710mm. Saw blade magazine with 3 mounting arbors. Oil filtration system suitable for HSS and carbide (HM), oil cooler brand Polar 2.9. Tooth profiles for HSS: Form A, B, BW, C, and special profiles. TK saw blades can be ground in diameters from 200-500mm. The fire extinguishing system is an oil retrofit kit with aerosol extinguishing generator. Equipped with electrostatic air extraction. Hedpexuq I Eofx Aqter

Condition: excellent (used), Year of construction: 2011, operating hours: 31,648 h, functionality: fully functional, machine/vehicle number: 90265 2011, saw blade diameter: 710 mm, tooth pitch: 55 mm, grinding wheel diameter: 200 mm, total width: 2,662 mm, total length: 2,540 mm, total height: 2,640 mm, type of input current: AC, input current: 10 A, input frequency: 50 Hz, disc diameter: 200 mm, grinding wheel bore: 32 mm, grinding spindle motor power: 3,000 W, saw blade width: 8 mm, input voltage: 400 V, overall weight: 3,200 kg, saw blade bore: 80 mm, power: 10 kW (13.60 HP), grinding diameter: 710 mm, workpiece diameter (max.): 710 mm, Equipment: rotational speed infinitely variable, CNC saw blade sharpening machine with lateral tooth divider grinding device and saw blade magazine for blades up to D=560 mm for unmanned operation. In manual mode: 40–710 mm. Saw blade magazine with 3 holding arbors. Oil filtration system for HSS, oil cooler brand Polar 2.9. Tooth geometries HSS: Form A, B, BW, C and special tooth forms. Saw blade holders for manual loading D=75 to 250 mm and D=40 to 100 mm. Special program for grinding variable tooth pitches. CAD program for creating up to 250 custom tooth shapes. Fire extinguishing system is an oil retrofit kit with aerosol extinguishing generator. With electrostatic air extraction. Hjdpfx Aex Tct Tsqtor

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 -WKG 972 On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Technical data: Saw blade diameter: 300 mm Clamping angle: 20 ° Lateral displacement: 73 mm Power supply / connected load: 380 Volt 50 HZ Factory No.: 30769 Rated current: 2 A Hsdpjurkypofx Aqter

Condition: good (used), Circular Saw Blade Sharpening Machine Manufacturer: unknown Circular saw blade diameter: up to approx. 200 mm Grinding wheels: 160 x 15 mm Connection: kW Saw dimensions: 320 x 340 x 500 mm Base cabinet dimensions: 410 x 410 x 590 mm Accessories/Equipment: Condition: good Weight: 100 kg Hsdpsy Hgplofx Aqtsr Overall dimensions: 410 x 410 x 1,100 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x1300x1800 mm Weight 0 kg Total power requirement 2,2 kw Hedpjv A Hgkefx Aqter