Used Mitre Circular Saw for sale (6,914)

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides Hfsdpstv Rgrsfx Aacsn * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: used, Mitre Cold Circular Saw EISELE Type VMS-II-S Model No. 421 Serial No. V 2295 Year of manufacture: 1984 Cutting capacity at 90° (round): Ø 120 mm Cutting capacity at 90° (rectangular): 120 x 90 mm Saw blade diameter max.: 350 mm Blade speed: 40 - 80 rpm, 2-step Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 1.4 and 1.9 kW Power supply: 380 Volt, 50 Hz - Two cutting speed stages via two motor speeds Hedexk Uunepfx Aacsfn - Manual saw carriage lowering via adjustable lever - Manual material vice, side-adjustable - Coolant system with electric coolant pump integrated in machine base - Equipped with one saw blade, approx. Ø 350 mm - Outfeed roller conveyor 750 mm with simple length stop up to 1000 mm, fixed to the machine base - Infeed roller conveyor 2350 mm with simple length stop up to 2500 mm, free-standing - Usable roller width: 180 mm Space requirement of base machine with outfeed roller conveyor (L x W x H): 1400 x 850 x 1700 mm Base machine weight: approx. 450 kg Infeed roller conveyor weight: approx. 140 kg Good condition

Condition: ready for operation (used), A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible. Hodpfx Aaowt Tkvecsfn

Condition: used, cleaned, partially refurbished, with new support plate used, in good condition Manufacturer Graule Type ZS 85 N GS-certified Motor 2.5 kW 220 V Cutting height approx. 85 mm Cutting length approx. 350 mm Blade diameter approx. 300 mm Swivels right Swivels left Tiltable up to 45° Storage location: 97447 Gerolzhofen, free loaded, unpacked Handover in the actual condition as inspected, without any warranty or guarantee Hjdpfxow En Ige Aacofn

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 Hfodpfx Asd N H A Noacen saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, Year of construction: 2008, fully equipped, with cutting extension to 540 mm incl. HM special blade 350 x 3.5 x 40, 108 trapezoidal teeth flat tooth, negative rake for aluminum cuts used, top condition, low hours Manufacturer: Graule Model: ZS 135 Year of manufacture: 2008 Machine no.: 2008/30/23 CE pattern tested Motor 2 kW Brake motor Cutting height approx. 135 mm Large cutting length extended to approx. 540 mm Blade diameter approx. 350 mm Saw blade bore approx. 30 mm Tiltable right Tiltable left Machine base Roller table right 3000 mm with stop and scale – RLH with handwheel adjustment, pneumatic clamping, and electronic digital display Roller table left 5000 mm, type RO Feed brake Material support made of aluminum Coolant spraying system 2 x pneumatic workpiece clamps right + left Pressure reducing valve Original price approx. €12,750.00 Location: 97447 Gerolzhofen, free loaded, unpacked Hedpfx Aoww Nd Teacefn Delivery in as-inspected condition, without warranty or guarantee.

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm Hfsdpsquzd Rsfx Aacsn - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: new, 400 Volt Drehstrom-Bremsmotor 5,0 kWSägeblattdurchmesser 520 mm,Sägeblattaufnahme 50 mm,Schnitthöhe 200 mmSägeblatt auf 45° geneigt: Schnitthöhe 140 mm,Schnittlänge 420 mm,mit Maschinenständer und Handkurbel hintenzur Neigungseinstellung Hfsdpfx Aevxr Theacsn

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft - Belt drive between the drive motor and saw shaft Hedsdzp Snjpfx Aacefn - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Condition: used, Year of construction: 1986, incl. 2 saw blades d, good conditionmake Grauletype ZS 85 Nyear of manufacture 1986motor 2.2 kWcutting height approx. 85 mmcutting length approx. 380 mmblade diameter approx. 300 mmsaw blade bore approx. 40 mmswivel right up to 45°swivel left up to 45°tiltablemachine basefeed brakematerial system made of aluminum-steelnew price approx. 5.000,00 € with accessoriessuction connection D 80 mmweight approx. 150 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Hjdevwfg Eepfx Aacofn

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Hedpfx Ajdzp T Djacofn Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: used, Vesto saw with two discs for sale - electric motor: 2 x 7.5 kW, - complete with hydrostation, Hjdpfx Aaetqt T Iocofn - electrical cabinet.

Condition: good (used), Year of construction: 2018, saw blade diameter 350 x 32 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 1 x 80 mm Hedpfexn Anwex Aacefn capacity 45 degrees: round 100 mm links capacity 45 degrees: round 75.0 mm rechts

Year of construction: 2000, condition: ready for operation (used), This SCHÜCO B 50 S was manufactured in 2000. It features saw blades of 500 mm and a maximum distance between saw heads of 6000 mm. The saw units can swivel both left and right, enhancing flexibility and precision in metal cutting. Contact us for more information. Application Types Sawing Hjdpoxmbwzofx Aacsfn

Condition: good (used), branded types - circular saw, make Gema, type HGB Hsdpsu T N T Asfx Aacsfn Accessories: Vice

Condition: new, Year of construction: 2025, Closed and safe sawing area for more safety due to legally prescribed saw protection device Anti-twist protection of the wood due to stamped barbs in the rocker Stable, torsion-resistant steel frame Trolley for easy transport Shock, scratch and weather resistant due to high quality powder coating Phase inverter Dimensions and weights Working height 700 mm Rocker support 740 mm Length approx. 1030 mm width/depth approx. 770 mm Height approx. 1095 mm Weight approx. 92,5 kg Drive Type of drive Electric motor with direct drive Electrical data Input power 5 kW Hfodpfx Aohkz Hioacsn Supply voltage 400 V Mains frequency 50 Hz Saw blade diameter 700 mm Cutting capacity Rocker roundwood 250 mm Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: used, saw blade diameter 560/660/710 mm cutting diameter 170/220 mm cutting range 1000 x 220 mm Hfjdpjxnc U Refx Aacjn cutting speed 7- 48 m/min clamping devices hydraulic pneumatic 20- 315 mm dimensions 2,9 x 2,2x 1,95 m weight of the machine ca. 2,8 t Used plate saw - part fixures - new security componens - external control panel

Condition: good (used), Year of construction: 1997, Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Scmidt, aluminum metal circular saw Velox 350 24V with solid base frame -Saw blade: Ø 350 mm 1800/3600 rpm -Double miter: 45° -Cutting capacity-round: 90°/45°: Ø 120 | 115mm -Cutting capacity-Square 90°/45°: 200x88 | 150x80mm -Drive: 1.5/1.8 kW -Double clamping device: manual operation -Dimensions: 900/585/H1850 mm -Weight: 194 kg Hedpfxen D Urpo Aacsfn

Condition: excellent (used), Year of construction: 2000, Feed unit, circular saw feed apparatus for panel saws For cutting of strips, window scantlings, trimming narrow ABS edges, etc. Mounting to the circular saw fence Motor 0.14kW, 380 Volt Two feed speeds: 13 + 16m/min Integrated electric safety magnetic system fixes the feed unit to the saw table using an electromagnet Quick adjustment of workpiece height via handwheel Rubber-coated feed rollers Max. workpiece height approx. 80mm Minimum workpiece length approx. 200mm Extraction connection Hsdsxlywwopfx Aacsfn Largely repainted CE mark Mounting rail dimensions: 41x21mm, internal dimension 31 x 11mm, groove width approx. 14mm Rail fits Altendorf but is also adaptable to many other panel saw brands; additional adapter rails are available from Panhans Weight approx. 30kg The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see 'further offers from this provider.'

Year of construction: 2004, condition: good (used), A used good condition double miter cold circular saw machine from KASTO Model: "KASTOdisc A10". - Fully automatic operation - Single cut - Hydrasulic saw bars - Central lubrication for saw guides - Coolant device - documentation Saw blade diameter 350mm Cutting range round 90°/ 45° 100/ 100mm Hfedpfekfvhksx Aacon square 90/ 45° 100x100/ 100x100mm Rectangle 90°/ 45° 170x100/ 130x100 Shortest remaining piece length with single cut at 90° 30mm Shortest remaining piece length in automatic mode at 90° 260mm Working height 950mm Dimensions WxDxH 1530x1348x1890 mm Weight 980kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Year of construction: 2014, condition: good (used), The machine is from year of manufacture 2014/6 (demonstration machine) Commissioning was in 2017 Cutting range round - 75 mm Rectangle - 60 mm Saw blade dimension ø 285 x 2,0(T) x 1,7 (t) mm T = waste; t = thickness ; bore 32; 4x11 at 63 mm Blade speed inverter monitored 30- 150 rpm blade motor 7,5 kW Hsdpfx Ash Awzmoacofn Hydraulic system 1,5 kW Coolant system Oil mist lubrication Blade feed system servo motor & ball screw material support 1.200 x 5.200 mm Bar feed system: servo motor and ball screw Automatic index single stroke 6 - 600 mm Multiple stroke up to 3.000 mm Automatic chip conveyor Chain conveyor Machine weight, incl. table 2.800 kg Length tolerance +/- 0,1 mm Cutting accuracy +/- 0,1 mm Remaining piece standard 75 mm Loading capacity 13 x ø 75 mm bars Max loading width. 1.000 mm Accessories: chip conveyor, air cleaning, loading magazine (still under power in production)

Condition: good (used), Year of construction: 1988, Ulmia table saw Type 1710 S make no. 7270 Year of manufacture 1988 With sliding table With slotted hole drilling table / equipment Swivel saw blade Table extension Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Hodpfx Aor Elm Noacefn Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 203 kg Location: ex stock 54634 Bitburg - available immediately - Request more information

Condition: good (used), Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, cold circular saw metal circular saw type TRL 300 pivoting on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 315 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm Hfedpfx Aoxlzytjacen -Accessories: incl.2 saw blades, see photos -Dimensions: 1230/630/H1800 mm -Weight: 273 kg

Condition: excellent (used), Sprossen punching machine 12 mm Used, in top condition Manufacturer: Schleicher Sprossen knife 12 mm Right extension table with stop slider Required space approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Hfsdpfx Aew Hlztjacon Storage location: 54634 Bitburg, loaded free, unpacked Handover in as-inspected condition, without guarantee or warranty

Condition: excellent (used), Year of construction: 1982, Ulmia table saw Type 1710 S Make No. 2943 Year of manufacture 1982 With sliding table Swivel saw blade Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 121 kg Location: ex stock 54634 Bitburg - immediately available - Hfodpfxjr Elmwj Aacen