Used Circular Saw Machine for sale (83,741)

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Hodpfx Asu R S Dhjg Uong Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg - new exhibition machine -

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Hnedjxvbvvopfx Ag Ujg Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: used, Bernardo CSM2000 circular saw-milling machine, in good condition, 3 kW, 315/30 mm, approx. 2200 mm cutting length, approx. 100 mm cutting height, approx. 500 kg Prices subject to change, errors and misprints excepted. Hjdex H Ufbjpfx Ag Uong

Condition: used, 1200064 Cutting machine for grinding small circular saw blades. Hnjdpfx Agoulfftj Uog saw blade ø: max. approx. 300 mm Saw blade ø: max. approx. 300 mm

Condition: ready for operation (used), Year of construction: 2017, Swift Jet Water Jet Cutting Machine Ex University Machine Cutting Area 1525 x 3050mm Z axis Clearance 220mm Tank Depth 840mm Water Pump Hypertherm HyPrecision 30Hp Positional Accuracy + - 0.015mm Traverse Speeds 15m/min Advanced nesting and cutting software Collision Protection, heavy duty build that will cut almost any material with no heat distortion. *For sale with Jet Machinery Ltd* Stock No: 78971 Serial No: 1160111 Price: £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Hnjdpjw Rg Sajfx Ag Usg Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 1982, condition: used, Circular saw blade sharpening machine Hnsdpfx Aocq Nghjg Uog Loroch JLM 36

Condition: ready for operation (used), functionality: fully functional, Saw motor, pole-changeable, 1.0 / 1.6 kW Hjdpfsx Exyaox Ag Ujng 6 cutting speeds: Motor stage 1/2: 8, 10, 12.5 m/min and 16, 20, 25 m/min Cutting capacity at 90 degrees with blade size 360 mm: round: 110 mm flat: 200 x 80 mm Saw blades: 315 / 360 mm Saw feed: hydraulic Material feed: hydraulic, min. 10 mm Material clamping: hydraulic 2 additional saw blades --> --> Special price: EUR 4,150 net, loaded free of charge!

Condition: as good as new (ex-display), functionality: fully functional, saw blade diameter: 450 mm, Kaltenbach KKS 450 E completely overhauled. The KKS 450 E is a semi-automatic mitre saw for ferrous and non-ferrous metals such as: Steel, Stainless Steel, Chrome Steel, Brass, Copper, Bronze, etc. Advantages at a glance:  Clamping, sawing, reversing and opening – all with one lever  Saw height can be adjusted by means of a lever  User-friendly mechanical controls mounted directly on the machine  Good accessibility for changing saw blades and maintenance work  Workpiece clamping device on both sides of the saw blade  Two cutting speeds for almost all applications Hnjdpfjwn Ixksx Ag Uog  Kaltenbach ‘cut from below’ principle ensures good chip removal  Ergonomically positioned controls for ease of use  Adjustable saw stroke limiter and fast return of the saw blade For more information, please email or call.

Condition: new, Hardened precision steel bar guided sliding aluminium table. Parallel fence with micrometric fine adjustment. Sawblade tiltable up to 45° with hand wheel. eccentric clamp, stable outrigger table for working heavy plates with degree raster Mitre fence 1400 mm with 2 end stops, integral fence 500 mm Circular saw: max sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallelfence 850 mm max. cutting height, 90°/45° 103 mm/72 mm engine power 3,8 kW S6 (3 Kw S1) dust collector inlet 120 mm length of sliding table 2000 mm Spindle moulder: Hedpfex H Uctsx Ag Uong spindle diameter 30 mm spindle travel 160 mm spindle speeds 8000/6000/3500/1500 engine power 3,8 kW S6 (3 Kw S1) weight 520 kg

Condition: used, Year of construction: 1993, functionality: fully functional, Panel saw, spindle moulder, combination machine, table saw, circular saw, carpenter’s saw, panel dividing saw, table router, tilting spindle moulder FELDER Model: KFS37 FL Year: 1993 Sliding table length: 245 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment, up to approx. 75 cm Outrigger table with extendable crosscut fence Mitre fence Hnjdpfx Aoxycy Reg Usg Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the tilting spindle Manual tilting of the moulder spindle up to 45° to the rear Spindle diameter: 30 mm 3 spindle speeds, adjustable via belt Spindle can be lowered below table level and removed Spindle moulder motor power: 3 kW Cutter fence with fine adjustment and parallel guidance—Felder multi-adjustment system Fold-away support for power feeder Eccentric workpiece clamp Prior inspection is expressly recommended; please leave your telephone number by email and I will contact you to arrange a viewing appointment. Subject to prior sale. All information provided without guarantee. Machines can be collected in person or shipped by freight at the buyer’s expense. Loading and packaging can be organised by us. The quoted shipping costs are indicative; actual costs may vary depending on location and unloading facilities, please enquire. The item is offered under differential taxation. The displayed sales price is the gross final price. An invoice showing VAT separately will not be issued. Basis of warranty: Due to age and wear, sale is exclusively to commercial buyers with no warranty, guarantee, or return the claim. All information is without guarantee. By placing a bid, the buyer acknowledges this. For used items, warranty is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, all warranties are excluded. For new items, warranty is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: excellent (used), combined circular saw / milling machine / slot mortising machine - 30mm spindle Hnsdpowzyx Asfx Ag Uog

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw Hjdpfodzp T Dox Ag Usng year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm - or square-80 mm -Pneumatic chucks -Material supplies automatic position control Hnsdpfod Aai Tjx Ag Usg -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Hsdpfxoxmuzae Ag Usng Year of construction 1980 Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: used, Panel saw-milling machine Holzprofi FPSFM2000, good condition, 3 kW, 2200 mm table length, 100 mm cutting height, 2000 mm sliding table length, 500 kg Hnedpfx Agewzzgbs Usg Price changes, errors, and printing mistakes reserved.

Condition: good (used), Year of construction: 2004, sawing machine for non-ferrous metals transmission range up to Ø60 mm respectively 70 x 70 mm cut-off length up to 250 mm engine power: 3 kW rotation speed: 180 - 4800 rpm Hnodpfxjfkh E Ae Ag Ujg sawing blade up to 250 mm pneumatic voltage flow cooler control system renewed: 2011 ESTA oilmistseperator type AS 600, year of construction: 2006 We sell only to companies with registered office in the EU. Dispatch type: ex works Payment term: Prepayment

Condition: used, technical data to follow Hnedsml H Nepfx Ag Ueg

Condition: excellent (used), Year of construction: 2014, Manufacturer: Henrik WINTER HOLZTECHNIK GmbH (Leipzig, Germany) Model / type: SAWMAX 600 Year of manufacture: 2014 Serial number: 130705-28 Power supply: 3×400 V, 50 Hz Maximum power: 1.69 kW Hnjdpfx Agsw R E Slo Usg Weight: 650 kg Certificate: CE

Condition: good (used), Year of construction: 1990, functionality: fully functional, Paoloni TT20-I Circular Saw Milling Machine S/N 00005/90 Year of construction 1990 Manufacturer Paoloni Macchine S.p.A. Italy Saw blade diameter max 350 mm Aluminum carriage with V-guide carriage length 2.100 mm rip fence 125mm Support table up to 340cm Hnjdpetq Ivlsfx Ag Uog Saw blade tiltable 45 degrees scoring unit 125mm, 1 HP Cutting height max 110mm Motor 5.5 HP Speeds: 3000/4500 / 6000 Table milling machine Spindle diameter 30mm for tenon cutters Spindle stroke 180mm max table opening 340mm motor 5,5 HP 5 different speeds (adjustable with belt pulley) 2500-8500 RPM weight 1300 kg

Condition: used, Circular saw-milling machine Bernardo FK2, good condition, 2.2 kW, 450 kg Hodpfx Agsx H Uigo Usng Price changes reserved; errors, misprints and typographical mistakes excepted.

Condition: used, Circular Saw Milling Machine KPSF2500-4.4, in good condition, 4.4 kW S1, 2700 mm cutting length, 2500 mm sliding table length, 700 kg Hnodpfx Aox H Uimjg Ujg Price changes, errors, printing and typographical mistakes reserved.

Condition: used, saw blade diameter 420 mm capacity 90 degrees: round 130 mm capacity 90 degrees: flat 160 x 100 mm capacity 45 degrees: round 110 mm capacity 45 degrees: square 130 x 80 mm turning speeds 3000 U/min engine output 2,0 kW total power requirement 2,0 kW weight of the machine ca. 190 Kg Hnodorub S Uopfx Ag Ujg dimensions 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Hnsdpfx Agot Amc Ie Ueg

Condition: new, saw blade diameter 400 mm capacity 90 degrees: round 130 mm Hnodouay Dlepfx Ag Ujg capacity 90 degrees: flat 160 x 130 mm capacity 45 degrees: round 110 mm capacity 45 degrees: flat 110 x 125 mm saw blade turning speeds 3000 U/min total power requirement 1,75 kW weight of the machine ca. 140 kg dimensions 1,0 x 0,65 x 1,5 m Alu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet

Condition: new, The KKS 275 T, a Manual Circular Saw Machine from KNUTH, is your essential tool for precise cutting in any workshop. Designed for machining smaller tubes and profiles, it features a robust yet easy-to-operate design, allowing for accurate miter cuts of up to +/- 45 degrees. The KKS 275 T is equipped with a high-precision rigid vise, which incorporates a quick-action clamping feature that is ideal for small batch production. With its built-in coolant system and an integrated rust-proof gear mechanism, it ensures durability and minimal maintenance. This model not only handles solid materials, tubes, and sections of steel and light metals efficiently but also provides a large cutting capacity with dimensions of up to 70 mm for round and 90x45 mm for flat workpieces. For optimal performance, request a quote for the KNUTH KKS 275 T, a reliable choice in the Circular Sawing Machines product group. Hnsdpfxjuyifns Ag Uog