Used Metal Cutting Circular Saw for sale (41,475)

Year of construction: 2007, condition: excellent (used), functionality: fully functional, REMONNAY edger and resaw type DR8/225, year 2007 7-arm variable adjustment, 2 x 110 kW motors each Pre-cutting saws of the side fabric Crodsfcltgepfx Afwsc Cutting height 225 mm S-acceleration with infeed roller table with turning and alignment table Splinter separator with two lamellas Board cross conveyor Roller conveyor with pull-off device Electric control cabinet with control panel incl. all accessories (circular saws etc.)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 382, Log sawing line with infeed and outfeed conveyors, 2 x 2 electrically movable sawblades, sawblade diam 970 mm, main el.motors 2 x 45kW. Log length 0,8 - 8 m, max log diam 40 cm, original electric cabinet, line is still under power and can be demo started up, line has been in operation totally 3-4 years Cedpfx Afsxwyzgjworc

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: - Swivels both sides up to 45° Csdpfx Afjykvw Sowerc - Saw blade tiltable to one side up to 45° for vertical mitre cuts - Motor: 2 kW, 400 volt, 2800 rpm - Saw blade diameter: 300 mm - Extraction connection diameter: 75 mm - Cross cuts: 380 x 85 mm - Mitre cuts, saw blade vertical, 45° swivel to left or right: 265 x 85 mm - Mitre cuts, vertical, saw blade tilted 45° to the left: 380 x 60 mm Availability: short notice Location: 63934 Röllbach

Condition: reconditioned (used), • 150 mm cutting height • 750 mm feed-through width • 350 mm wide slat bushing with used spacer rings and saw blades • Saw shaft fitted with new bearings Crsdjw I Sg Dspfx Afwsc • 55 kW saw motor • 1,170 mm working height • Infinitely adjustable feed • Roller lifting with hydraulic hand pump • Machine workshop-inspected • Machine newly painted

Condition: good (used), Year of construction: 2009, machine/vehicle number: 87376, Offer 23330 Technical Data: - Semi-automatic sawing machine with hydropneumatic feed - Saw blade feed – vise - Saw blade diameter: 350 mm Cedpfx Asxx R Tiefwjrc - 2 saw blade spindle speeds: approx. 40 + 80 rpm - Cutting capacity at 90°: round 110 mm; flat 120 x 80 mm - Cutting capacity at 45°: round 80 mm; flat 80 x 80 mm - Mitre adjustment: left up to 45°, right up to 45° - Infinitely variable saw blade feed - Pneumatic material vise - Electric foot switch - Pneumatic connection: 6 bar - Drive: 400 V / 1.4 / 1.8 kW - Coolant system - Space required: approx. W 1000 x H 1500 x D 1200 mm - Weight: approx. 300 kg

Condition: used, Year of construction: 2000, machine/vehicle number: xxxx, Order No. 22510 Technical Specifications: - Sawblade dimensions 315 x 2.5 x 32 mm - 2 sawblade spindle speeds approx. 40 + 80 rpm - Cutting range at 90°: round 95 mm Crodpfx Aov I T Daefwsc - flat 110 x 70 mm - at 45°: round 90 mm - flat 85 x 70 mm - Miter adjustable left + right up to 45° - Material clamp - Drive 400 V / 0.75 / 1.3 kW - Space required approx. W 700 x H 1400 x D 700 mm - Weight approx. 200 kg

Condition: good (used), Year of construction: 2010, machine/vehicle number: 89336, Offer 25433 Technical specifications: - Saw blade diameter: 350 mm - 2 saw blade spindle speeds: approx. 40 + 80 rpm - Cutting range at 90°: - round: 110 mm Cjdpfxjxx Sgkj Afwjrc - flat: 120 x 80 mm - Cutting range at 45°: - round: 80 mm - flat: 80 x 80 mm - Mitre adjustment: left up to 45°, right up to 45° - Manual saw blade feed - Material clamping vice - Drive: 400 V / 1.8 / 2.4 kW - Coolant system - Space requirement: approx. W 1000 x H 1500 x D 1200 mm - Weight: approx. 300 kg

Year of construction: 1998, condition: good (used), machine/vehicle number: 080024-38 U, Offer 23332 Technical data: - Saw blade dimension 250 x 2 x 40 mm - Saw blade spindle speed 52 rpm - cutting range at 90° round 80 mm - flat 95 x 60 mm - miter adjustable up to 45 ° Cedpfxsp Ebn Ss Afwsrc - Material vice - Drive 400 V / 0,5 kW - Space requirement approx. W 650 x H 1500 x D 750 mm - Weight approx. 100 kg

Condition: good (used), Year of construction: 1996, Woodworking machine circular saw VEMA TKS LBM, year 1996, with milling-drilling device, data milling-drilling device: speed: 3.000 rpm, table size: 570 x 300 mm, drilling depth: 150 mm, drilling length: 210 mm, height adjustment: 170 mm, two-jaw chuck: up to 20 mm, data saw: speed 3000-6000 rpm, up to 450mm blade, cutting height up to 155mm, angle cut 0°-45°, table dimensions 1260x1100mm expandable width with longitudinal fence 2200mm, extra table 750x950mm Crsdpfxehvaphj Afwoc

Condition: used, functionality: fully functional, Inspection is possible by prior telephone appointment. Delivery is also possible by arrangement. Codpfx Afjyg Nzcowsrc

Condition: good (used), Year of construction: 1995, functionality: fully functional, saw blade diameter: 400 mm, max blade diameter 400 mm cutting height adjustment angle adjustment 0″- 45″ spindle diameter 30 mm blade guard max. cutting width with guide bar 1270 mm 2 types of rotation speed 3000 / 4500rpm table top dimensions 1020 x 1120 mm worktop extension worktop extension undercutter max diameter of undercutting saw blade 130 mm diameter of undercutter spindle 20 mm undercutter motor 0,75 kW motor 4 kW overall dimensions L/W/H 2930 x 2600 x 1450 mm weight 711 kg Codeqwduxspfx Afwsrc

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Startup type negotiated Csdpfeb Rnv Ssx Afwerc Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Credpfxew A Iilo Afwjc Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, product height (max.): 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Cjdpov Awguefx Afwsrc Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Sizing accuracy (mm/m) : Length direction ≤±0.2 Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs - Optional touchscreen control with top-tier international cutting systems - High-quality drag chain cables – durable, bend-resistant, and interference-free

Condition: new, functionality: fully functional, Year of construction: 2025, travel distance X-axis: 50,000 mm, travel distance Y-axis: 4,000 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: cooling unit, GS-50040LB (Bevel Cutting) Ultra-Large Format Laser Cutting Machine 40kW Bevel Cutting + 60kW Straight Cutting Credpfx Afov Ng E Towsc Dual Beam, Dual Head, Dual Ultra Ultra-Large Cutting Area: 50m × 4m Dual High-Power Cutting Heads – 60kW Straight & 40kW Bevel Cutting Precision Cutting for Ultra-Thick Plates Bevel Cutting Performance: ✔ Y-Bevel: 40kW | 20mm Carbon Steel | 1.4m/min ✔ K-Bevel: 40kW | 30mm Carbon Steel | 0.35m/min ✔ V-Bevel: 40kW | 50mm Carbon Steel | 0.2m/min ✔ Straight Cutting: 60kW | 150mm Carbon Steel | 0.3m/min Applications: Aerospace | Shipbuilding | Bridges | Heavy Machinery

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 40,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: exchange table, fully protected exchange table, ultra-high power, dual platform Laser power: 12KW15KW, 20KW, 30KW, 40KW, 3KW.6KW Standard hardware: scrap car, fire brick, fully automatic butter filling, dual-control workbench, adaptive multi-angle site placement, rear lift light-blocking door, rear camera, internal camera, monitoring display, radiation-proof glass, top cover beam light curtain, partition dust removal Optional hardware: light-blocking rubber strip, high-pressure proportional valve (standard above 6KW), safety door lock, independent laser cabinet, rear exchange table light curtain, top cover fan Credpfx Aswxam Ijfwoc Optional functions: FDA configuration, CSA configuration, TUV configuration, conventional CE configuration

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 30,000 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 13,050 mm, travel distance Z-axis: 450 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 20,000 kg, input frequency: 50 Hz, total length: 16,800 mm, total width: 2,200 mm, total height: 5,120 mm, warranty duration: 24 months, working range: 13,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, GS-CL Series, Glorystar Single Table Gantry Type Metal Laser Cutting Machine Laser Power: 12000-80000W Fits in a standard 40HQ container The GS-L Series is a high-power metal laser cutting machine with a gantry-type segmented bed design. It can be freely customized to meet processing format requirements according to customer needs. Key Features: ● Super Large Processing Format with a gantry-style segmented design. ● The GS-L Series has the largest Z-axis travel and height in its class in the industry. Supports extreme thickness cutting for plates over 20mm. Capable of cutting ultra-thick plates up to 70mm. ● High Negative Pressure Automatic Partition Dust Removal ● Equipped with a high-air-volume fan for effective dust removal. Csdsvmwn Hjpfx Afwsrc Technical parameters: Working area (mm): 13000mm*3000mm（bevel cut: 12500mm*2500mm） X axis travel distance (mm): 3050mm Y axis travel distance (mm): 13050mm Z axis travel distance (mm): 450mm X/Y axis positioning accuracy: ≤0.03mm/m X/Y axis repeat positioning accuracy: ≤±0.02mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2G Min. setting unit: 0.001mm Floor size (mm): 18500mm*6500mm Main body dimension (mm): 16800mm*5120mm*2200mm Worktable max. weight capacity (T): 20 tons (even load bearing)

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Csdpfxshwrhmo Afwsrc Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Year of construction: 2021, total length: 1,200 mm, total width: 800 mm, total height: 250 mm, SCHUNK - KONTEC KSG 100 MACH-ID 9632 Make: SCHUNK Type: KONTEC KSG 100 Year: 2021 Clamping force 4 - 30 kN Weight 19.5 Kg Single stroke vice Clamp width: 100mm Max. opening: 100mm Manuel or hydraulic: Manuel Number of matching vices:4 Cedoy Uvk Ispfx Afworc Length: 1200mm Width: 800mm Height: 250mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2013, overall weight: 220 kg, chuck outer diameter: 600 mm, Metal cutting Tooling TDG Spain - 4-600 MACH-ID 9627 Make: TDG Spain Type: 4-600 Year: 2013 Diameter: 600mm 4 chuck: yes Max. speed:970Rpm Length: 1200mm Width: 800mm Cjdpfjy T Ik Rox Afwjrc Height: 400mm Weight: 220kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1994, condition: used, functionality: fully functional, Emmegi Norma 350 TU/4 double-head saw with dust extraction system and spare blades for cutting PVC profiles. Cjdjza Smnjpfx Afworc €2,500 (excluding VAT). No delivery; must be picked up at the workshop.

Condition: used, Cross-cut saw BERG & SCHMIDT Junior 275 -used- Underframe, Crjdpfxou R S I Ho Afwoc carriage ----- Technical data ----- Cutting height: 60 mm, Voltage: 230 V

Condition: new, GRAULE ZS 85 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 85 N cross-cut and mitre saw - inclinable - Material feed shoulder made of laminated wood - without machine stand and saw blade - Csdpsu R Sycefx Afwsrc Including: - GRAULE machine stand for type ZS 85 N to ZS 170 Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: new, Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm Introductory special price Includes: - Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm SAFE - SOLID - FAST The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2-hand control - Protective shield, rigid - incl. HM saw blade 500 mm Z = 108 Technical data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Rotation speed: 2,800 rpm. Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction nozzle: 1 x 120 mm / 1 x 100 mm Codpfx Ajvtrkiefworc Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Minimum distance between stop (left side) and saw blade: 70 mm Minimum distance between stop (right side) and saw blade: 520 mm Minimum distance between 2 stops (optional): 60 mm Note: Basic price without roller conveyors. When setting up the saw, a support table or roller conveyor must be installed at least 1 m to the left and 1 m to the right of the saw. Included: - Roller conveyor without scale on the right, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Include: - Roller conveyor with stop ruler and scale on the left, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: The stop must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Include: - Pneumatically pivoting stop with 200 mm length - new exhibition machine -

Condition: excellent (used), Panel Saw-Spindle Moulder KNAPP KFS Profi T -used- Sliding table saw with format sliding carriage, with outrigger table, tilt-adjustable circular saw, mitre and angle fence, tilt-adjustable spindle moulder, moulder spindle with reversible rotation (clockwise/counterclockwise), fine-adjustable moulder fence ----- Technical Data ----- Cutting length (sliding table): 2,000 mm Cutting height: 103 mm Cutting width: 700 mm Max. saw blade Ø: 315 mm Saw blade tilt range: 45° Spindle moulder diameter: 30 mm Spindle tilt range: 45° Spindle speeds: 2,850 / 4,000 / 7,800 rpm Saw extraction port: 120 + 40 mm Spindle extraction port: 120 mm Dimensions (LxWxH): 2,010 x 1,230 x 83 mm Weight: 590 kg Crjdpfjyyzqdsx Afwec Quality info: - All settings checked - Adjusted according to manufacturer specifications - Complete basic inspection - Thorough basic cleaning - Electrical system checked - Immediately ready for operation