Cold circular saw Light metal circular saw

Kaltenbach SKL

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 119349, saw blade diameter: 450 mm, total length: 12,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 1,500 kg, KALTENBACH SKL 450 H Cold Circular Saw (completely overhauled) - Saw blade diameter: 400/450 mm Hodjy Dcrwepfx Ahnofi - Saw blade arbor: 50/4 x 14/80 - Working range, round material 90°: 135/160 mm - Square stock 90°: 125/145 mm - Profiles 90°: 300 x 40 mm / 320 x 50 mm - Profiles, lying 45°: 220 x 60 mm / 250 x 40 mm - Profiles, standing 45°: 60 x 130 mm / 100 x 150 mm - Saw motor: 3.7/4.7 kW - Cutting speed: 1950/3900 m/min - Infeed roller conveyor T3, outfeed roller conveyor T3 with length measuring device L45E, one initial piece: 2000 mm, horizontal clamping system SKL 450 Note: the machine has been completely overhauled! Note: the item must be collected between July 7th and July 9th, 2026, on a date to be agreed upon. FCA D-73235 Weilheim Teck - loaded onto a truck.

Condition: used, Wig welding machine MESSER GRIESHEIM, Type Combitig GW 23 AC/DC The machine only functions with DC welding and contact ignition. Manufacturer's serial number: 445276, Year of manufacture: approx. 1990 Power: 230 amps = 35% duty cycle 180 amps = 60% duty cycle 140 amps = 100% duty cycle Adjustment range: stepless Current type: DC Mains connection: 400 volts, 50 Hz, 32 amp plug - 2-cycle / 4-cycle welding unit - DC welding with contact ignition functions - AC welding and high-frequency ignition do not function Hedpfsdzqa Iox Ahnefi - 7-meter hose package with WIG hand torch - Connection plug for remote potentiometer (foot switch) - without foot switch - Air-cooled - Gas pressure regulator Space requirement L x W x H: 850 x 480 x 600 mm Weight: approx. 90 kg The welding test yields good results when welding stainless steel with DC. The HF ignition does not function; however, the arc can be ignited by briefly making contact. When welding aluminum with AC, no arc is formed.

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MV-117894/D, saw blade diameter: 400 mm, total length: 8,000 mm, total height: 1,900 mm, total width: 1,000 mm, overall weight: 1,000 kg, KALTENBACH SKL 400 EC-H Cold Circular Sawing Machine (completely overhauled) - max. cutting width: 4 mm - saw blade mounting, bore: 50 mm - number of mounting screws: 4 - pitch circle of mounting screws: 80 mm - saw blade feed speed: 0 - 3000 mm/min - rapid traverse: 4500 mm/min - adjustment range of the workpiece stop: 70 mm behind and 40 mm in front of the biometric zero point = 110 mm - rotary table adjustment, manual, stepless: 90 degrees This is a completely overhauled machine. Configuration: Metering system MS-2 C, infeed roller conveyor T3: 4 m, infeed roller conveyor T3, outfeed roller conveyor T3 with length measuring device L45D Hsdpsy Dcqyofx Ahnofi Note: the item must be collected between July 7th and 9th, 2026, on a date to be confirmed. FCA D-73235 Weilheim Teck - loaded onto a truck.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 313026, saw blade diameter: 450 mm, total length: 10,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 2,000 kg, KALTENBACH SKL 450 H Semi-automatic cold circular saw - Operating voltage: 3 x 400 V - Frequency: 50 Hz - Includes roller conveyors Note: The item must be picked up between July 7th and 9th, 2026, on a date to be confirmed. FCA D-73235 Weilheim Teck - loaded onto a truck. Hsdsy Dcr Dopfx Ahnefi

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Hjdpfjwf Dpgjx Ahnofi Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, total length: 7,500 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,500 kg, KALTENBACH SKL 400 H Cold Circular Sawing Machine (completely overhauled) - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade arbor: 50/4 x 14/80 mm - Working range, round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles, horizontal 45°: 220 x 60 mm - Profiles, vertical 45°: 80 x 120 mm - Saw motor: 3.7/4.5 kW - Cutting speed: 1750/3500 m/min - Saw blade feed: 0 - 3700 mm/min - Rapid return of saw blade: 4500 mm/min Additional equipment: - Workpiece clamping with short-stroke clamping cylinder: stroke 8 mm - with hand crank for pre-setting - Machine completely overhauled and newly painted - Horizontal clamping cylinder at the front, per piece Hodsy Dcu Espfx Ahnjfi - Minimal lubrication instead of coolant mist spray device - Infeed roller conveyor T3 with rollers 60 x 289 mm - one starting section: 2000 mm, with 5 rollers, one foot, one mounting angle - one extension section: 2000 mm with 4 rollers, one foot, one guide roller, adjustable as a guide for material bars - Length measuring device including discharge roller conveyor T3 Note: the item must be picked up between July 7th and 9th, 2026, on a date to be determined. FCA D-73235 Weilheim Teck - loaded onto a truck

Condition: good (used), Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting range at 90°: flat – 260 x 60 mm Cutting range at 90°: square – 105 mm Cutting range at 45°: flat – 200 x 45 mm Cutting range at 45°: square – 90 mm Speed range, 2 steps: 1400 / 2800 rpm Drive power, pole-changing: 2 / 4 kW Machine dimensions (L x W x H): approx. 1100 x 1100 x 1700 mm Weight: approx. 850 kg Siegfried Volz Werkzeugmaschinen Hfsdpfx Ajx Rvb Sohnji Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t Hfjdpfx Aed N Sm Dshnoi +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 1983, condition: used, Aluminum miter saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Saw blade diameter: 355 mm -Speeds: 1420/2880 rpm -Drive: 3.7/4.5 kW Hedsd Ixn Repfx Ahnofi -with: coolant device -Dimensions: 990/1140/H1535 mm -Weight: 596 kg

Year of construction: 1994, condition: ready for operation (used), A refurbished Kaltenbach CNC cold circular saw with an L45NC length stop is available. Year of refurbishment: 2016, max. feed length: 1000mm, miter adjustment: +/-90°, saw blade dimensions X/Y/Z: 400mm/3.2mm/40mm, max. cutting diameter: 130mm, max. cutting capacity for rectangular material: 315mm/40mm, max. cutting capacity for square material: 120mm/120mm, cutting speed: 3000m/min, saw blade feed range: 0mm-1100mm/min, max. material feed speed: 10m/min, machine dimensions X/Y/Z: approx. 2350mm/1250mm/1800mm, weight: approx. 1900kg. Documentation available. An on-site inspection is possible. Hfodpfx Aozi Ehvehnei

Condition: ready for operation (used), Year of construction: 2010, pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, clearance between the columns: 4,050 mm, total length: 6,100 mm, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, Hydraulic press brake Hfsdpfx Ajzd Tf Sohnji Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S Year of manufacture: 2010 Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Throat depth: 405 mm Stroke of Y-axis: 400 mm Installation height: 720 mm Table width: 140 mm Motor power: 37 kW Oil capacity: 600 L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 m Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control system: Cybelec ModEva 10S, 2D – graphic control • Upper tool clamping system Trumpf/Wila, hydraulic • Lower tool clamping system Trumpf, hydraulic • CNC-controlled crowning • Safety light curtain Lazersafe • 2 pcs. CNC bending aids incl. parking position • Pneumatic die shifting • Foot switch • Very large tool package, as shown in the photos • LCB angle measuring system (2 x front, 2 x rear) All information without guarantee.

Condition: good (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 350 mm, total length: 1,000 mm, total width: 1,150 mm, total height: 1,550 mm, cutting range round steel at 90°: 125 mm, overall weight: 620 kg, saw blade speed: 2,800 rpm, length stop: 2,000 mm, Semi automatic Aluminium circular saw, blade Ø 350 mm, capacity Ø ca. 125 mm, motor 3,7 / 4,5 kw 2-speed 1420/2880 rpm, vertical clamp, stops 30°, 45°, 60° 90° double side, blade; dimension 100x115x155 cm, weight ca. 600 kgs Hodpfx Ajtqfvyohnsfi

Condition: used, Year of construction: 1972, 1 used, well-maintained, hydro-pneumatic, semi-automatic cold circular saw for cutting aluminum, non-ferrous metals, wood, and plastic Technical data: max. saw blade diameter 370 mm cutting diameter 120 mm cutting range at 90 degrees: flat 260 x 60 mm cutting range at 90 degrees: square 105 mm cutting range at 45 degrees: flat 200 x 45 mm cutting range at 45 degrees: square 90 mm Hfjdjbwl Emepfx Ahnoi 0° cut – longitudinal cut: yes 2 speed settings 1500 / 3000 m/min drive power 1.7 / 2.6 kW machine dimensions L x W x H 1000 x 1000 x 1700 mm machine weight 700 kg Accessories / Special features: • Semi-automatic operation: After starting, the workpiece is automatically clamped by the upper clamping cylinder. Once the set feed end is reached, the saw blade automatically moves down and the clamping jaw is released. • Stepless feed • Reversible motor • 1 saw blade • Double miter cut • Longitudinal cut 0° • Spray coolant system Optional accessories: - 1 roller guide right with heavy stop 3500 mm and scale - 1 roller guide left, approx. 3500 mm Price of optional accessories: 1,500.00 € plus VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, – Semi-automatic – Saw blade 500 mm – Double miter cut – 4 pneumatic clamps – Mist lubrication system Hfjdpogg N Scsfx Ahnoi – Roller conveyor 300 cm with length stop – Air blow gun – Protective cover – Documentation – 400V

Year of construction: 1971, condition: used, machine/vehicle number: 23964, disk of circular saw-Ø: 370 mm cutting area at 90°: 115 mm cutting area at 45°: 115 mm engine: 380 V, 4/5 kW space needed: 1000 x 1200/2200 x 1500 mm Hodpfx Ahecu Dvuonsfi weight: ca. 900 kg