Used Metal Shears for sale (35,217)

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Njdpfxozl A Ras Ac Asdb Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: ready for operation (used), Year of construction: 1990, control type: manual, degree of automation: manual, working width: 2,050 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge adjustment: manual, back gauge: 800 mm, power: 7.5 kW (10.20 HP), overall weight: 1,800 kg, total length: 2,850 mm, total width: 2,350 mm, total height: 1,600 mm, cutting length (max.): 2,050 mm, throat depth: 300 mm, Guillotine shear, cutting length 2050 mm, cutting capacity 3.25 mm, throat 200 mm, motor 7,5 KW, working high 800 mm, back gauge 800 mm manual, dimension 2850x2350x1600 mm, weight ca. 1800 kgs Ndodpfxjzy Nlys Ac Asb

Condition: used, Oscillating shear machine KÖLLSCHEN, type BSK 2000/2 Cutting length: 2000 mm Cutting thickness: 2 mm Stand overhang: 90 mm Working height: 920 mm Power supply: 380 volts, 50 Hz Motor power: 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet metal holder - Manual back gauge, 500 mm - Gauge adjustment via 2 handwheels, at the rear on the back gauge guide with a measuring scale - Front side gauge, left, 720 mm - Electric foot switch - Manual central lubrication - Control cabinet on the machine - Machine rests on 4 oscillating elements, approximately 100 mm in height Ndodpfx Aceifu Anj Asb Space requirement (L x W x H): 2800 x 1700 x 1450 mm Weight: 2300 kg Good condition

Condition: good (used), Year of construction: 1975, working width: 3,100 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, back gauge: 700 mm, overall weight: 6,000 kg, total length: 3,400 mm, total width: 2,200 mm, total height: 1,800 mm, cutting length (max.): 3,100 mm, throat depth: 300 mm, Cutting length 3100 mm, cutting capacity 10 mm, motor 15 KW, working high 800 mm, back gauge 700 mm motorised, footpedal, 3 frontarms, fingerstop, pneumatic back support, cutting angle adjustable, dimension 3400x2200x1800 mm, weight ca. 6000 kgs Nodpsvvwdyefx Ac Aodb

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: C11008, working width: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. working width: 3,000 mm Back gauge type: Electric Back gauge depth: 1,000 mm MACHINE DETAILS Drive type: Hydraulic Control: Conventional Power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,000 x 1,950 mm Njdpfez Ebbusx Ac Aodb Shipping weight: 7,500 kg Shipping packages: 1 unit EQUIPMENT Documentation Angle adjustment: Manual Shear gap adjustment: Manual Finger guard: Fixed

Condition: used, Hydr. guillotine shears SAFAN type VS 310 / 4 Machine. No. B7140 Year of construction 1984 Cutting length 3100 mm Cutting thickness 4 mm Back gauge 900 mm, accuracy +/- 0.5 mm Nedpfeumpq Nex Ac Aodb Angle fence front left 2100 mm Hydraulic tank capacity approx. 120 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single stroke and continuous stroke with adjustable stroke pause - Cutting angle adjustment - Manual cutting gap adjustment - stepless cutting length adjustment - Cutting line lighting - 17 Hydraulic sheet hold-down device - Angle stop left with scale 2100 mm - 2 material support arms 1600 mm - 2 material support arms 615 mm - Electric foot switch - Fixed finger guard in front of the hold-down devices Space requirement without sheet supports L x W x H 3850 x 2300 x 1680 mm Machine depth with sheet supports 3900 mm Weight 5.7 tons good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 621307509, controller model: Delem DAC-350, working width: 3,080 mm, sheet thickness (max.): 10 mm, overall weight: 11,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 10 mm Max. working width: 3,080 mm Cutting speed: 20 mm/min MACHINE DETAILS Control system: CNC Controller: Delem DAC-350 Drive type: Hydraulic Connected power: 30 kW Dimensions & Weight Dimensions (L x W x H): 4,980 x 2,400 x 2,200 mm Weight: 11,500 kg Transport packages: 1 unit Ndjdpfoz Ebcfjx Ac Aob EQUIPMENT Electric back gauge Pneumatic sheet support system Fixed finger guard with hinged protection Ball-bearing table Motorized angle adjustment Motorized shear gap adjustment Documentation

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 6.088.177.254, controller model: Durma DT-7, working width: 3,100 mm, sheet thickness (max.): 13 mm, overall weight: 11,800 kg, TECHNICAL DETAILS Max. sheet thickness: 13 mm Max. working width: 3,100 mm Overhang: 50 mm Design: Swing-beam Angle adjustment: Manual Shear gap adjustment: Motorized Back gauge type: Electric Back gauge depth: 1,000 mm MACHINE DETAILS GENERAL Control system: CNC Controller: Durma DT-7 Drive type: Hydraulic Power: 30 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,350 x 2,350 mm Weight: 11,800 kg Nsdpezuwvvefx Ac Aodb Transport packages: 1 unit EQUIPMENT CE marking Finger guard: Fixed with fold-up guard Table type: Ball-bearing table

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13707, working width: 6,200 mm, sheet thickness (max.): 6 mm, power: 11 kW (14.96 HP), overall weight: 17,500 kg, throat depth: 60 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. working width: 6,200 mm Overhang: 60 mm Back gauge depth: 1,000 mm MACHINE DETAILS Power: 11.0 kW Control system: Conventional Control system manufacturer: Elgo Drive type: Hydraulic Dimensions & Weight Overall length: 6,400 mm Weight: 17,500 kg EQUIPMENT Documentation Sheet support system: Pneumatic Angle adjustment: Motorized Back gauge type: Electric Njdpfszk Dzdox Ac Asdb

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Nedpfx Asq A I Upsc Asdb Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Condition: ready for operation (used), Year of construction: 1987, control type: manual, degree of automation: manual, working width: 2,000 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge: 1,000 mm, power: 7.5 kW (10.20 HP), overall weight: 2,600 kg, total length: 22,000 mm, total width: 27,000 mm, total height: 16,000 mm, cutting length (max.): 2,000 mm, throat depth: 300 mm, Hydraulic shear, cutting length 2050 mm, cutting capacity 4 mm, throat 300 mm, motor 7,5 KW, working high 800 mm, back gauge 1000 mm motorised, dimension 2700x2200x1600 mm, weight ca. 2600 kgs Ndodpfx Acjtwzcte Asb

Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Machine. No. 00682 Year of construction 1980 Cutting length 2520 mm Cutting thickness 6 mm Backgauge 750 mm Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Back gauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment - 11 pieces hydraulic sheet metal hold-down device - front angle fence left 1300 mm - 3 front table extensions 1300 mm - electric foot switch - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) Ndjdpfx Aet Ac D Uec Ajb - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Good condition

Condition: good (used), Heavy-duty electric tin snips Functional, ready for use Cutting width 2,000 mm Sheet thickness 8 mm Motor 7.5 kw Ndjdoviubpopfx Ac Ajb

Condition: used, Year of construction: 1993, Max. cutting length: 4000 mm Max. sheet thickness: 4 mm steel Controlled rear stop up to 1,000 mm side stop and table extensions cut length limit cut edge illumination safety fence, roller with safety switches Weight: approx. 8500 kg Ndedpfx Acjf Nwvfe Aob

Condition: used, Year of construction: 2008, functionality: fully functional, Billet shears, make Valdarno, used, well-maintained condition, incl. bar magazine 6m Njdpfxotukq Uo Ac Aodb

Condition: good (used), Hydraulic tank cap, tank cap -Hydraulic tank cover: from Atlantic ATS 3006 plate shear Njdpfxsykz Rkj Ac Aedb -Item No.: HMG 400 x 1 H -Dimensions: Ø 440 x 70 mm -Weight 14.5 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0156084906226, Offer 23145 Hydraulic Flat, Profile, and Bar Steel Shear with Notching Device and Punching Unit Technical Specifications: - Flat Bar Shear - Blade length: 420 mm - For flat material: 400 x 15 mm - Profile Steel Shear - No blades installed Ndjdpfxsy Ddv Re Ac Aob - Angle steel at 90°: 110 x 10 mm - at 45°: 65 x 8 mm - T-steel at 90°: 90 x 10 mm - Bar Steel Shear - No blades installed - Round steel / Square steel: 35 / 32 mm - Notching device - For material up to 12 mm - Triangular notching: T 60 mm - Punching unit - Punching force: approx. 500 kN - Stroke, infinitely adjustable: 0 - 40 mm - Punches steel up to 30 mm Ø in 15 mm - Throat depth: 410 mm - Hydraulic drive: 400 V / 7.5 kW - Space required: approx. W 1400 x H 1800 x D 700 mm - Weight: approx. 1800 kg - Includes: various punches and dies, support/stop table, triangular notching unit, 2 foot pedal switches

Condition: used, Year of construction: 1983, Max. cutting length: 3,000 mm Ndsdpfx Acsr D Tnws Aob Max. sheet thickness: 8 mm steel Motorized rear stop with fine adjustment via handwheel up to 1000 mm cutting length limitation knife sharpened Weight: 6,800 kg

Condition: ready for operation (used), Year of construction: 1985, control type: manual, working width: 4,080 mm, sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 22 kW (29.91 HP), overall weight: 16,500 kg, total length: 5,300 mm, total width: 2,500 mm, total height: 2,300 mm, Cutting length 4080 mm, cutting capacity 10 mm, motor 22 KW, working high 800 mm, back gauge 1000 mm motorised, cutting line, footpedal, 4 frontarms, maschine can be lower down by 200 mm, dimension 5300x2500x2300 mm, ca. 16000 kgs Ndedpshl Im Nefx Ac Aeb

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here, we offer a complete Desktop Metal 3D printer system. 3D metal printer studio system from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D printer Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Ndodpezd Tllsfx Ac Ajb Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell infills for lightweight strength. 1.2 Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles tailored to each design and material ensure uniform heating and cooling without the residual stresses found in laser-based systems. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Used Press Brakes and Shears available – various capacities and working lengths Photo 1 – Press brake GEKO – 100 ton – 3050 mm Photo 2 – Synchronized press brake VICLA – 125 ton – 3100 mm Photo 3 – Synchronized press brake WARCOM FUTURA – 200 ton – 4550 mm Photo 4 – Press brake GADE – 50 ton – 4050 mm Ndjdpfx Acoyabn Uo Aeb Photo 5 – Press brake CML – 100 ton – 4100 mm Photo 6 – Shear GEKO – 3050 x 6 mm Photo 7 – Shear VICLA – 3050 x 8 mm Photo 8 – Shear BL – 3050 x 5/7 mm Photo 9 – Shear AMADA – 4000 x 8 mm Photo 10 – Shear OMAG – 2050 x 4 mm

Condition: new, Universal shear for cutting metal sheets. Includes base frame. Ndodpfxjga T Efj Ac Aeb Working length: 1000 mm Sheet thickness: 1.5 mm Weight: 70 kg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 3,200 kg, opening width: 280 mm, total width: 2,050 mm, total length: 1,000 mm, total height: 1,200 mm, cutting force: 100 t, cutting length (max.): 600 mm, Alligator Shear 100 Tons – 11 kW | Powerful Metal Shear for Recycling & Industry This robust alligator shear is the ideal solution for efficient metal cutting in recycling operations, workshops, or industrial environments. Featuring immense cutting force and a durable construction, this machine is designed for continuous operation under heavy loads. Powered by a high-performance 11 kW motor, the unit delivers an impressive cutting force of up to 100 tons (1000 kN). This allows for effortless and reliable processing of a wide range of materials such as steel, profiles, pipes, or scrap metal. A 600 mm long blade and a maximum opening of 280 mm enable convenient handling of even larger workpieces. With a cycle rate of 9–16 strokes per minute, this shear operates efficiently and ensures a high throughput. The heavy-duty construction with a total weight of 3,200 kg guarantees maximum stability and long service life—even in demanding continuous operation. Technical specifications: • Power: 11 kW • Cutting force: 100 tons / 1000 kN • Max. pressure: 100 tons • System pressure: 16 MPa • Blade length: 600 mm • Max. opening: 280 mm • Stroke rate: 9–16 strokes/min Ndedpeyu S Egefx Ac Aob • Weight: 3,200 kg • Dimensions: 2050 × 1000 × 1200 mm Highlights: • Extremely powerful metal shear (100 tons) • Ideal for scrap, steel, profiles & pipes • Large blade length for versatile applications • High throughput due to efficient stroke rate • Robust industrial design for long-lasting use This alligator shear is the perfect choice for anyone looking to cut metal reliably, powerfully, and efficiently.

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: 5053-4053142274002, power: 30 kW (40.79 HP), Bar shears, make Peddinghaus, type Caddy 63 Technical data: Ndjdotukpaepfx Ac Aob Shearing force/diameter (max.): 2000 kN/63 mm Drive power: 30 kW Equipment/special feature: bar magazine, 6 m

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13.707, working width: 6,200 mm, sheet thickness (max.): 6 mm, power: 11 kW (14.96 HP), overall weight: 17,500 kg, throat depth: 60 mm, TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. working width: 6,200 mm Overhang: 60 mm Back gauge type: Electric Back gauge depth: 1,000 mm Angle adjustment: Motorized Sheet support system: Pneumatic MACHINE DETAILS Power: 11 kW Drive type: Hydraulic Control: Conventional Control system: Elgo Dimensions & Weight Ndedpfx Ajzuwzrjc Aob Overall length: 6,400 mm Shipping weight: 17,500 kg EQUIPMENT CE certificate Documentation