Aluminium Circular Saw

BERG & SCHMID VELOX 350 VA MPS

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Hydro-pneumatic control of the saw head · Pneumatic double clamping device · Pneumatic vertical clamping device · Electro-pneumatic material feed unit with material hold-down device · Vernier for length adjustment · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Leftover piece length in automatic mode 210 mm MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator Knodped Iinzjfx Akwsc

Condition: ready for operation (used), Year of construction: 2018, Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for reading orders/machining operations and documentation. Was serviced regularly, an on-site inspection is possible. Kodpfx Akezbb Rrjwsnc

Condition: like new (used), Year of construction: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade 560 mm Motor power 6,5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100 - 4200 m/min Saw height control: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed 0 - 40 mm/s infinitely adjustable Cutting length 5-950 mm (9999 mm multiple stroke) Feed speed max. 500 mm/s Weight approx. 1900 kg Dimensions LxWxH 2200mm x2700mm x1950mm The machine is in mint condition, both technically and visually, following a completed retrofit. Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The programmed HMI control system ensures simple and very profitable operation of the machine. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI user interface - Replacement of the ball screw - Replacement of servo motor and servo inverter - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve terminal - Optimization of extraction performance - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab The machine also has: - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) - Height control fully electronic Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: Knsdpfx Akeuiy Hrowsc - Mass clamping device for parallel sawing of several workpieces - Flat magazine for automatic feeding of up to 6 m long primary materials - Roller conveyors for primary material - Reinforced motor 18.0 KW (frequency-controlled) - Delivery and installation on your premises - Training of your employees

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Knjdsuiy Ngspfx Akwec Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm Kodpotycdksfx Akwjnc stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: used, pressure 55 t throat 250 mm Knsdpfscp Apyex Akwoc stroke 10-90 mm table-size 640 x 495 mm no. of strokes 120 Hub/min ram adjustment 55 mm ram surface 290 x 210 mm ram hole 40 H7 mm hole in the table 220 x 190 mm T-slots 22 clamping plate 620 x 485 x 65 mm total power requirement 4,5 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 m

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Knsdok S Htxopfx Akwoc Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm table-size 520 x 400 mm no. of strokes 160 Hub/min work capacity during endurance run 1370 Nm force 2740 Einzelhub adjustment of stroke 4 - 80 mm ram adjustment 40 mm Kedpob U Hwnefx Akwonc ram surface 160 x 160 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm hole in the table 80 mm weight of the machine ca. 1,9 t

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Ksdpfxsd N E Rve Akwonc Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Condition: ready for operation (used), Year of construction: 1994, A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible. Knodpfx Akswtg Hwjwjc