Cold Circular Saw

WMT Drycutter

Condition: new, length 1200 mm width 600 mm height over floor 860 mm dimensions 1200 x 600 x 400 m Pedpfx Asu Imdqekierc weight 49 kg Workbench with 5 drawers and solid wood worktop Dimensions 1200 x 600 x 870mm Drawer dimensions (internal) 430 x 400 x 110 mm

Condition: new, length 1700 mm width 600 mm height over floor 860 mm Pedpfx Aextfy Tokisrc table load capacity 400 Kg dimensions 1700 x 600 x 400 m weight 70 kg Workbench with 6 drawers and solid wood worktop Door compartment dimensions (W x D x H) 940 x 400 x 440 mm Small drawer dimensions (W x D x H) 460 x 400 x 120 mm Height adjustment: max. 40 mm

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. Pedjudi Uzopfx Akijrc The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: used, Surface and thickness planer Scheppach HMC3200, year of manufacture 1993, in good condition, 2.9 kW, 320 mm table width, 1380 mm table length, 150 kg Prjdpfx Aox H Ugxekioc Price changes reserved, subject to errors and typographical mistakes.

Condition: good (used), Year of construction: 2011, From a company liquidation: Berg und Schmid VKS 370 HA Year of manufacture 2011 Semi-automatic machine 4-meter roller conveyor left + right Left stop with digital length measuring system, adjustable via handwheel Cutting capacity with a 370mm saw blade: Round 120mm - Square 100mm - Rectangle 180x100mm at 90° at 60°: Round 110mm - Square 90mm - Rectangle 90x100mm Miter cuts left up to 60° - right up to 45° Saw blade mount 40mm Saw blade speed 15-70 rpm 380 volts Coolant pump Semi-automatic function: 1. Clamp the material Podpfx Aewa Ecqskijrc 2. Saw starts 3. Lower at rapid traverse to the beginning of the material or cut immediately for serial cutting 4. Remove the saw blade 5. Raise the frame until just above the material 6. Open the clamping jaw

Condition: good (used), Year of construction: 2010, saw blade diameter: 250 mm, overall weight: 130 kg, input voltage: 380 V, coolant pump power: 100 W, Huvema HU250 DV cold circular saw for sale Manufacturer: Huvema Type: HU 250 DV Year of manufacture: 2010 Voltage: 400 V 50 Hz Pjdpjtwdviefx Akisrc Mounted on a tripod, rotating head, quick clamp. 2-speed motor Liquid cooling with pump Dimensions of the saw blade: 250 x 32 mm Cutting capacity 45° straight: 50 x 60 mm Cutting capacity in a 45° circle: 65 mm Cutting capacity 45° square: 55 mm Cutting capacity 90° straight: 55 x 95 mm Cutting capacity in a 90° circle: 70 mm Cutting capacity 90° square: 70 mm Dimensions: Height: 150 cm Width: 60 cm Length: 90 cm Weight: approx. 150 kg

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Coil dispenser for wire Lincoln Idealarc DC-600 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 600 Amps at 100%. Welding equipment: Idealarc DC600 220/380/440 3/50/60 Input voltage: 220/380/440V Podpfx Asu Afwlskijrc Input current: 116/67/58A Input Hertz: 50/60 Input phase: 3 Input power: 220/380/440V/3/50/60 Output range: CV:70A/13V - 780A/44V DC:90A/24V - 780A/44V Rated output: 600A/44V/100%. 680A/44V/60%.

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7346, Offer 24016 Technical data: - Drilling capacity 22 mm Psdsrwmbgspfx Akijrc - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - throat depth 210 mm - Machine table 480 x 420 mm - min. /max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: good (used), various counter bearing support blocks, rollers 5-fold adjustable for transverse and longitudinal rotation to relieve e.g. the welding rotary table or to transport pipes different versions Height adjustment in steps or stepless different heights The carriers themselves have a load capacity of up to 8 tons Pjdpfx Asl Dwnlskijrc prices from 480.-€ to 850.-€

Condition: excellent (used), Kolbe band saw model K430 s. I have got 5 available. Prodpoy U Ht Hjfx Akioc