Used Mchale V 660 for sale (36,300)

Condition: used, Year of construction: 2024, EMOD FHKFIE3 450L/6C Industrial Electric Motor – 800 kW Heavy-duty industrial electric motor suitable for variable speed/frequency converter applications. Technical specifications: Manufacturer: EMOD Type: FHKFIE3 450L/6C Motor No.: 8830664 Year: 2024 Rated power: 800 kW Rated voltage: 660 V Δ Rated frequency: 50 Hz Rated speed: 995 rpm Rated current: 850 A Power factor: cos φ 0.85 Efficiency class: IE3 Efficiency: 95.8% Protection class: IP55 Duty cycle: S1 Weight: 6,600 kg Standard: EN 60034 Temperature monitoring: PT100 Variable speed operation: 5 Hz – 99 rpm 50 Hz – 995 rpm 90 Hz – 1,790 rpm Frequency range: 5–90 Hz Equipped with a separate forced ventilation motor: EMOD FHEIE3 FOL100LA/4 3.0 kW 400 V 50 Hz Tjdoz Dh Rmjpfx Akiod 1,445 rpm IP55 The motor is industrial surplus and is offered in its present condition. Sold as-is, without warranty, and without the possibility of claims.

Condition: new, Type: SV 660 l 2P-V Completely stainless steel Hopper capacity 660 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 9.5 kW Voltage: 380 V / 50 Hz Tjdpfoul Tziex Akied Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Width: 140 Length: 170 Height: 161

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 152-026710, overall weight: 3,000 kg, total height: 5,593 mm, total width: 1,340 mm, load capacity: 5,000 kg, power: 4.63 kW (6.30 HP), main lifting speed: 4,000 mm/min, fine lifting speed: 12 mm/s, throat depth: 4,000 mm, working height: 4,500 mm, operating hours: 20 h, Equipment: documentation/manual, 5 t pillar-mounted slewing crane with electric hoist and electric slewing drive Manufacturer: ABUS Kransysteme GmbH Type: VS 660 pillar-mounted slewing crane with electric chain hoist / wire rope hoist GM 1000.5000 H-162.41.6000.6.E130.20 Year of manufacture: 2023 Serial No.: Crane: 152-026710 Trolley: 250-123870 For sale is a like-new pillar-mounted slewing crane with a lifting capacity of 5,000 kg and a reach of 4,000 mm. The system was put into operation at the end of 2023 and has only been used very little. According to the available remaining useful life calculation, only 20 operating hours have been recorded up to April 2025, resulting in a remaining reserve of approximately 1,598 hours or a projected remaining useful life of over 30 years. The crane features an electric slewing drive, an electric trolley, and a two-stage hoist. Operation is conveniently performed via a pendant control. The system is equipped with a load indicator system (LIS-SV), upper and lower hoist limit switches, and the associated inspection and conformity documents. Scope of supply: Tjdpszd Sqaefx Akijd * Complete pillar-mounted slewing crane * Electric slewing drive * ABUS trolley * ABUS wire rope hoist * Load hook 5 t * Crane inspection book * Declaration of Conformity * Remaining useful life calculation * Existing technical documentation Condition: Used, very good condition, low operating hours, regular inspection records available. System is visually and technically well-maintained. Photo of the assembled system is available. Location: Dresden Loading: Loading onto a suitable transport vehicle is included in the purchase price. Inspection: An inspection of the system is expressly desired and possible by appointment. Technical documents and further images can be provided upon request. Subject to prior sale and errors. * Lifting capacity: 5,000 kg * Reach: 4,000 mm * Crane type: VS 660 * Pillar diameter: 660 mm * Underside of boom: 4,983 mm * Hook travel: 6,000 mm * Crane classification: H2 / B3 * Hoist motor group: 2m / M5 * Operating mode: Indoor operation * Slewing drive: electric, two-stage * Slewing speed: 0.15 / 0.60 rpm * Hoisting speed: 0.7 / 4 m/min * Trolley travel speed: 5 / 20 m/min * Operating voltage: 400 V / 230 V, 50 Hz * Total connected load: 4.63 kW * Total current consumption: 12.07 A * Load indicator system: LIS-SV * Hook: Single hook DIN 15401, 5 t * Weight of boom: approx. 869 kg * Weight of pillar: approx. 872 kg * Weight of trolley: approx. 356 kg * Total weight of system: approx. 2,100 kg

Condition: excellent (used), Year of construction: 2011, Handtmann HVF 660S Vacuum Filler Manufacturer: Albert Handtmann Maschinenfabrik GmbH & Co. KG Model: HVF 660S Serial Number: 29385 Code: 147 Year of Manufacture: 2011 Power Supply: 400 V, 3 phases, 50 Hz Rated Power: 24 kW Current: 34.6 A Tsdpfjxl Hb Aox Akisd Dimensions: 1300 mm x 1600 mm x 2500 mm Construction: stainless steel The Handtmann HVF 660S vacuum filler is an advanced machine designed for precise filling and portioning of meat blends and other food products. Equipped with a vacuum system, it ensures excellent deaeration of the mass, resulting in high product quality, uniform texture, and extended shelf life.

Condition: excellent (used), Year of construction: 2016, The NovaMax660 is the next generation of advanced slide-plate forming technology. This state-of-the-art servo driven system is suitable for forming a broad range of meat, poultry and non-meat products. It is commonly used by high volume processors forming popular products such as burger patties, pork sausage, chicken filets and chicken nuggets. The high throughput and reduced cost of ownership will assure a rapid return on your NovaMax660 investment. Todjvl Evvopfx Akied Forming Style: Slide plate Typical Throughput*: 9,000 lbs/hour | 4,082 kgs/hour Line Width: 660 mm Speed: Standard speeds of 25-100 strokes/min (SX up to 120 strokes/min) Feed hopper Capacity: 1,100 lbs | 500 kg

Condition: good (used), Year of construction: 2020, functionality: fully functional, overall weight: 170 kg, total length: 705 mm, total width: 750 mm, total height: 1,800 mm, volume flow: 520 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, noise level: 78 dB, type of cooling: air, Equipment: type plate available, Little-used compressor (90% used for blowing air) from a model-making business for sale: V-belt-driven 2-cylinder unit with two-stage compression for 10 bar pressure, increasing performance and ensuring high efficiency. Tank with baked-on internal coating. 15-year warranty* on the tank against rust. Standard equipment includes all fittings: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, check valve, condensate drain valve, and shut-off valve. Standard equipment includes rubber vibration dampers. Electrical connection 400 V/50 Hz (three-phase). Tjdpfx Aj Agwf Nskiod Intercooler and aftercooler ensure rapid cooling of the generated compressed air. The low speed reduces vibrations, protects the compressor components, and reduces noise. Large fan impeller for optimum cooling. Easily accessible condensate drain under the tank. Also suitable for easy connection of a condensate drain line (Ecomat). Retrofitting of a refrigerant dryer is possible without any problems. Space-saving solution with a vertical tank. Technical data: Pressure: 10 bar Intake capacity: 660 l/min Speed: 1025 min-1 Tank volume: 270 l Weight: 170 kg Noise: 78 dB(A) Dimensions (W x D x H): 750x705x1800 mm Effective delivery rate: 520 l/min

Year of construction: 2023, condition: used, Used Machine Year of Manufacture: 2023 Features and Technical Specifications: - Stationary, oil-lubricated 2-cylinder piston compressor - Two-stage compression - V-belt drive - Intercooler and aftercooler - Condor pressure switch - Motor protection and safety valve - Tank pressure gauge - Check valve and relief valve - Condensate drain valve - Additional connection fittings with blind plugs - Rubber vibration dampers - Manhole opening for tank inspection - Tank compliant with AD-2000 regulations - Suction capacity: 660 l/min - Effective flow rate: 520 l/min - Maximum operating pressure: 10 bar - Motor power: 4.0 kW / 5.5 PS - Power connection: 400 V / 50 Hz - Start type: Direct start - Speed: 1,025 rpm - Vertical, internally coated 270-liter compressed air tank - Air outlet: 3/4-inch female thread with shut-off valve - Sound pressure level: 78 dB(A) Tedpfxezy Dzis Akisd - Dimensions: 750 × 705 × 1,800 mm - Weight: approx. 170 kg

Condition: used, 3D SYSTEMS Type: ProJet 660 Pro 3D printer 3D SYSTEMS 3D printer The ZPrinter ProJet 660 Pro 3D printer features a large build volume. This allows large models to be produced without prior cutting. Furthermore, the large base area increases productivity when printing many small models in a single printing process. 3D color printer with enormous productivity and color accuracy. The ProJet ColorJet color 3D printers from "3D Systems," also known as ZPrinters, use a layer-by-layer process based on the ColorJet CJP "Binder Jetting" technology, directly in a powder bed. As a result, even with complex and highly detailed prints, these 3D printers do not require dedicated support structures. The unconsolidated powder supports the components during printing and is then semi-automatically recycled. Application areas: Communication of form and design, installation analyses, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for deep drawing, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of 3D full-color printing systems. Technical data: ZPrinter ProJet 660 Pro 3D printer Build format: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum feature size: 0.1 mm Automation: Fully automated (automated setup and self-monitoring, automated loading of powder, automated recycling and removal of powder, snap-in binder cartridges, intuitive control panel) Tedszdyxropfx Akisd Vertical build speed: 28 mm/hour Material options: High-performance composite material Layer thickness: 0.089-0.102 mm Number of jets: 1520 Details: ZPrinter ProJet 660 Pro 3D printer File formats for printing: STL, VRML, PLY, 3DS, ZPR Device dimensions: 188 x 74 x 145 cm Device weight: 340 kg Power requirements: 100-240 V, 1.5-7.5 A Workstation compatibility: Windows® 7, Windows® XP Professional and Windows Vista® Business/Ultimate Legal regulations: CE, CSA Special requirements for installation: None Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 1996, A laminating machine Windmöller und Hölscher, without adhesive and coating unit, is available. Web width: 1420mm, coating width: 1400mm, max. roll diameter: 1000mm, max. roll weight: 1300kg, core inner and outer diameter: 76mm/95mm, max. mechanical speed: 460m/min, min. material thickness: 15mm, max. material thickness: 250µm, total machine dimensions X/Y: 19500mm/2500mm. The machine was used as a rewinder. Documentation available. On-site inspection is possible. Todpfsx I Rprsx Akisd

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, filling weight (max.): 500,000 g, stroke rate (min.): 25 1/min, stroke rate (max.): 120 1/min, TECHNICAL DETAILS Molding process: Sliding plate technology Servo-driven molding system Suitable for meat, poultry, and non-meat products Typical throughput: 4,082 kg/h Line width: 660 mm Stroke rate: 25–100 strokes/min Stroke rate SX: max. 120 strokes/min Capacity of the filling hopper: 500 kg EQUIPMENT Servo drive Sliding plate molding system Large-volume filling hopper Todpozzp Sisfx Akijd

Condition: used, Manufacturer: Treif / Variovac Year: 2018 Tsdpsyz Sc Tsfx Akied Condition: Used Stock Number: 3346J / 3347J Line is consisting of: Treif slicer Type: Divider 660+ Serial number: 660002.21888.133706 Year of construction: 2018 Cuts: max 2640 RPM Slice thickness: 0.5 - 25 mm Stacking height: up to 100 mm Product size: max 280 x 160 mm Product length: max 850 mm Belt width: 385 mm Compressed air: min 6 Bar Power: 3 x 400V, 50Hz, 7.5kW Dimensions: 1900 x 1050 x 2150 mm Weight: 850 kg Including knife holder and tool trolley Treif / Wipotec check weigher Belt width: 345 mm Weighing platform: 400 mm Dimensions: 400 x 1100 x 1050 mm Treif transversal sorter Belt width: 420 mm Dimensions: 700 x 1050 x 1050 mm Treif sorting conveyor Belt width: 420 mm Dimensions: 2300 x 1150 x 1250 mm Treif knife sharpener Type: HS-380 Serial number: 243003.61973.105787 Year of construction: 2009 Dimensions: 500 x 900 x 1650 mm Weight: 90 kg Variovac thermoformer Type: Optimus Serial number: 420.OL0707 Year of construction: 2018 Film: rigid film Film width: 420 mm Index: 280 mm Dye: 2 pc. of 232 x 175 mm Vacuum pump: Busch, RA0100F Compressed air: min 6 Bar Power: 3 x 400V, 50Hz, 15kW Dimensions: 4200 x 1100 x 1850 mm Weight: 1170 kg

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 15405034874, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 20 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,400 mm, total length: 2,500 mm, total width: 2,100 mm, table width: 560 mm, table length: 790 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 11,164 h, number of slots in tool magazine: 20, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, DECKEL MAHO DMC 635 V CNC Vertical Machining Center - Tool holder: SK 40 - Input resolution X/Y/Z: 0.01 mm - Path measuring system resolution X/Y/Z: 0.001 mm - Positioning tolerance in X/Y/Z with indirect measuring system: 0.020 mm, with direct measuring system: 0.008 mm - Max. tool diameter: 80 mm without free spaces, with free spaces: 130 mm - Max. tool length from spindle nose: 300 mm - Max. tool weight with automatic tool changer: 6 kg - Distance between T-slots: 100 mm - Number of clamping slots: 4 Note: without the machine vices shown in the photos! Includes the SK 40 tool holders located in the tool changer, as well as a 3D measuring probe. Tjdpfx Ake Afulmjijd Note: Spindle needs to be inspected! FCA D-71679 Asperg - loaded onto a truck.

Condition: used, mileage: 612,009 km, power: 375 kW (509.86 HP), first registration: 02/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: green, gearing type: semi-automatic, emission class: euro5, loading space length: 6,280 mm, loading space width: 2,480 mm, loading space height: 490 mm, Year of construction: 2007, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Construction: * Flatbed with aluminum side boards, * Dimensions i.L. 6,280mm x 2,480mm x 490mm, * Raised front wall, * Storage box, * Anchor rails in the flatbed floor, Crane: Fassi F 660 AXP.25 loading crane from 2007, * Radio remote control, * 4-point outrigger system, Crane reach/lifting capacity: Hydraulic: 3.40 m = 16,000 kg * 4.30 m = 13,095 kg * 5.95 m = 9,500 kg * 7.70 m = 6,980 kg * 9.65 m = 5,440 kg * 11.70 m = 4,375 kg * 13.85 m = 3,640 kg * 16.10 m = 3,100 kg Equipment: Cab: L (long), * Telligent transmission with clutch pedal, * Air conditioning + auxiliary air conditioning, * Auxiliary heater, * Additional thermal insulation, * Air horns on the cab roof, * Fuel tank: 590 liters, aluminum, * Driver/co-driver seat, sprung comfort seat including horizontal suspension, * Sun visor, Technology: Audio system: Radio Truckline CD 70, * Hands-free telephone system, * Multifunction steering wheel, Tedpszlvnfefx Akiod * Electrically adjustable and heated exterior mirrors, * Central locking with remote control, * Cruise control, * CB radio, * Extendable cooler box, * Acoustic reversing warning (external warning signal), * Circuit breaker, * Rotating beacon, left/right, Safety & Environment: Retarder Voith, * Telligent braking system with ABS+ASR, * Differential lock, rear axle, * Emission standard EURO 5, Other: German initial registration, * 1 previous owner, 1 driver * Axle configuration: 6x4 + hydraulically steered rear axle, * Engine 16.0 L - 375 kW V8 diesel (OM 502 LA), * Wheelbase 4500 mm, * Payload 6,675 kg according to ZLB * Permissible total weight 32.0 t Since 1972, your reliable partner for all things automotive/commercial vehicles in 28832 Achim at the Bremen motorway junction. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will be happy to create an individual offer for you! We are interested in taking your commercial vehicle/construction machine in trade. If a new TÜV (German vehicle inspection) is desired, we will be happy to provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the internet, in price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/guarantee for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are subject to change.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Double rotor round log debarker with infeed VK-600, rotor opening 620 cm warranty time 6 month from delivery, delivery time 8-10 weeks from order. Two debarking rotors, speed up to 120 m/min. Currently machine is under renovation Tjdpfx Akopbbmleiod

Condition: used, Year of construction: 2002, We have here a Buskro mailtable with feeder and vakuummodule with dryer available. Complete with a conveyor belt at the end. The mailtable has a vacuum shuttle feeder for infeed of documents. Inkjet which is installed works still but our advise is to change this for a new installation. Next to this there is a vacuum table with dryer installed. This system is complete with a conveyor belt at the end. Tjdpfxoyxmt Ij Akiod

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 72.122, functionality: fully functional, number of axes: 3, overall weight: 1,500 kg, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of controlled axes: 3 Working area X: 2,500 mm Working area Y: 900 mm Working area Z: 70 mm Milling spindle Number of milling spindles: 1 Tool holder: ISO 30 Spindle speed: 12,000–24,000 rpm Spindle speed control: Stepless Number of horizontal drilling spindles: 6 Number of vertical drilling spindles: 10 MACHINE DETAILS Tsdpe Af Hgpsfx Akiod Voltage: 400 V Current consumption: 22 A Fuse rating: 32 A Main motor power: 4 kW Connected load: 12 kW Dimensions & Weight Dimensions (L x W x H): 2,000 x 2,600 x 2,700 mm Weight: 1,500 kg Number of transport packages: 1 EQUIPMENT Horizontal drilling unit Vertical drilling unit Sawing unit Manual operation

Condition: used, operating hours: 261 h, machine/vehicle number: HEI0009695, fuel type: diesel, motor manufacturer: Baudouin 12M26 G1000/5, General information Year of manufacture: 2023 Field of application: Construction Weights Empty weight: 18.000 kg Functional Generator capacity: 1.016 kVA Dimensions of cargo space: 1219 x 244 x 258 cm CE mark: yes Tedpfxsyv Umkj Akiod Other information Fuel consumption: 145.2 Liter / Hour at 75% Load Generator: Mecc Alte ECO43 2SN Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Production country: IT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: excellent (used), Year of construction: 2000, operating hours: 24,695 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: approx. 1,000 mm Y-axis travel: approx. 800 mm Z-axis travel: approx. 500 mm Table length: approx. 1,250 mm Table width: approx. 800 mm Table load capacity: max. approx. 1,200 kg Spindle speed: up to approx. 15,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain Spindle operating time: 24,695 h Machine operating hours: 64,814 h Control system operating hours: 72,542 h EQUIPMENT Tsdpfxj Afxn Se Akiod Automatic tool changer Renishaw probing system Coolant system Chip conveyor

Condition: used, mileage: 612,009 km, power: 375 kW (509.86 HP), first registration: 02/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: green, gearing type: semi-automatic, emission class: euro5, loading space length: 6,280 mm, loading space width: 2,480 mm, loading space height: 490 mm, Year of construction: 2007, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Construction: * Flatbed with aluminum sideboards, * Dimensions: approx. 6,280 mm x 2,480 mm x 490 mm, * Raised front panel, * Storage compartment, * Recessed strips in the flatbed floor, Crane: Fassi F 660 AXP.25 loading crane from 2007, * Remote control, * 4-point outrigger system, Crane reach/lifting capacity: Hydraulic: * 3.40 m = 16,000 kg * 4.30 m = 13,095 kg * 5.95 m = 9,500 kg * 7.70 m = 6,980 kg * 9.65 m = 5,440 kg * 11.70 m = 4,375 kg * 13.85 m = 3,640 kg * 16.10 m = 3,100 kg Equipment: Cab: L (long), * Telligent transmission with clutch pedal, * Air conditioning + auxiliary air conditioning, * Auxiliary heater, * Additional thermal insulation, * Air horns on the cab roof, * Fuel tank: 590 liters, aluminum, * Driver/passenger seat: comfort suspension seat incl. horizontal suspension, * Sun visor, Technology: Audio system: Radio Truckline CD 70, * Hands-free telephone system, * Multifunctional steering wheel, * Electrically adjustable and heated exterior mirrors, * Central locking with remote control, * Cruise control, * CB radio, * Extendable cooler box, * Acoustic reversing warning (external warning signal), * Circuit breaker, * Rotating beacon, left/right, Safety & Environment: Retarder Voith, * Telligent braking system with ABS+ASR, * Differential lock, rear axle, * Emission standard EURO 5, Other: German initial registration, * 1 previous owner, 1 driver * Axle configuration: 6x4 + hydraulically steered trailing axle, * Engine 16.0 liters - 375 kW V8 diesel (OM 502 LA), * Wheelbase 4500 mm, * Payload 6,675 kg according to ZLB (Central Register of Road Vehicles) * Permissible total weight 32.0 t Since 1972, your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen interchange. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We are happy to accept your commercial vehicle/construction machinery in part exchange. Tedpfswpbgqox Akijd If a new TÜV (Technical Inspection Association) inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional cost. The information provided in advertisements, on the internet, in price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: new, machine/vehicle number: 20251131004, fuel type: diesel, motor manufacturer: Iveco CR16TE1W.S550, General information Year of manufacture: 2026 Field of application: Construction Tjdpfx Akjxbwvpjied Weights Empty weight: 4.500 kg Functional Generator capacity: 660 kVA Dimensions of cargo space: 470 x 200 x 240 cm CE mark: yes Other information Fuel consumption: 86.6 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 11520, input voltage: 400 V, total length: 7,500 mm, total width: 6,450 mm, total height: 2,300 mm, compressed air connection: 6 bar, type of input current: three-phase, year of last overhaul: 2022, overall weight: 3,800 kg, input current: 32 A, product height (max.): 280 mm, Equipment: documentation/manual, QUICK SALE WANTED Tedpfx Aks Aba Ilsiod K9 High-Speed Fully Automated Single-Colour Screen Printing Machine – Complete with K23 Scrambler, Hopper & Deco Inspection System For sale: K9 high-speed, fully automated screen printing machine, configured for single-colour printing. Designed for efficient production printing around cylindrical items, with applications including bottles, tubes and similar containers. Supplied complete with K23 scrambler and hopper for automated product feeding, plus a Deco camera inspection system to support print-quality monitoring during production. Printing capabilities: Item diameters: 20 mm to 130 mm Item lengths: 40 mm to 280 mm Single-colour printing High-speed automated operation; output depends on the item, artwork and machine setup K23 Scrambler & Hopper Provides product sorting and feeding to the printing machine, helping reduce manual handling and maintain a steady supply of items during production. Deco Camera Inspection System Included for inspection of printed decoration, helping operators monitor print consistency and identify quality issues during production. Service History Full service history prior to being placed into storage. Package includes: K9 fully automated single-colour screen printing machine K23 scrambler and hopper Deco camera inspection system

Condition: new, WEG W22 Premium 22 KW02P180M -380 - 415/660//440-460 V 50 Hz 3-phase electric motor, unused in original packaging, 100% functional. Scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Todpfx Aksx Dwibsisd

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 1,750 kg, permissible axle load (axle 2): 1,750 kg, first registration: 01/2000, loading space length: 9,200 mm, loading space width: 2,400 mm, total length: 10,070 mm, total width: 2,480 mm, wheelbase: 6,700 mm, General Information Year of manufacture: 2000 Axle Configuration Rear axle 1: Max. axle load: 1750 kg Rear axle 2: Max. axle load: 1750 kg Weights Unladen weight: 2,340 kg Payload: 2,660 kg GVW: 5,000 kg Functional Features Body brand: Masta Low Loader, with open loading platform Loading platform height: 65 cm Maintenance, History, and Condition APK (technical inspection): valid until 04/2027 Technical condition: good Optical condition: good = Company Information = Tedpfjz Ih D Isx Akiod Nidro cars Holland is located in the centre of the country and is the right place to purchase your car, van, or truck. The indicated price is the 'internet take-away price'. For questions or to arrange a test drive, please contact us: VIEW OUR ENTIRE INVENTORY AT All types of trade-ins are possible! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: ready for operation (used), Year of construction: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Pressing force: 532 kN Voltage: 400 Teds Aguyzspfx Akied Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press offers simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: ready for operation (used), Working width brush/suction nozzle: 660mm/850mm, fresh water tank capacity: 45L, waste water tank capacity: 45L, detergent tank capacity: 2.5L, battery capacity: 120Ah, battery runtime: 3.5h, charging time 80%/100%: 40min/60min, cleaning performance: 1250m²/h, cleaning speed: 0.6m/s, recommended working area: from 500m². Machine dimensions X/Y/Z: approx. 1000mm/850mm/900mm, weight: approx. 260kg. Documentation available. An on-site inspection is possible. Todpfexg Ri Tsx Akiod