Used Kempak 200 for sale (16,657)

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. Nlsdpfx Aswcgr Eokish New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Condition: good (used), Laska KCU200 from meat free factory. Programmable model with loader for 200 litre tote bins. Nledpfex Ilh Aox Akish

Condition: excellent (used), Year of construction: 1994, Low-speed machine with hydraulic moving floor. Rotor width: 840 mm. Motor: 18.5 kW. Hopper with lid included. Ready for operation. Only 3400 operating hours. Nlsdpfjx Ilp Hsx Akish

Condition: used, Year of construction: 2011, mileage: 265,853 km, power: 243 kW (330.39 HP), first registration: 01/2011, overall weight: 19,000 kg, fuel type: diesel, color: green, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, loading space volume: 9 m³, Equipment: ABS, air conditioning, Internal vehicle number: G300460 Available immediately at our yard in Kaufungen More information at: Luis Lucena Viktoria Sologubova Nsdpfsyfy Anjx Akislh Mercedes-Benz Axor 1833 4x2 road sweeper VAL?AIR – 9 m³ – 200 bar high-pressure system Mercedes-Benz Axor 1833 road sweeper, manufactured in 2011, featuring a VAL?AIR sweeper body, a 9 m³ debris container, and a high-pressure cleaning system with a pressure of up to 200 bar. The vehicle is equipped with a 330 hp diesel engine, a manual transmission, and air conditioning. Technical specifications: * Vehicle number: G300460 * Vehicle condition: Used * Category: Road sweeper / municipal vehicle * Manufacturer: Mercedes-Benz * Model: Axor 1833 * First registration: 01/2011 * Year of manufacture: 2011 * Mileage: 265,853 km * Fuel type: Diesel * Drive type: Combustion engine * Engine displacement: 7,201 cm³ * Power output: 243 kW (330 hp) * Transmission: Manual transmission * Emissions class: Euro 5 * Environmental badge: 4 (Green) * Axle configuration: 4x2 * Number of axles: 2 * Permissible total weight: 19,000 kg * Unladen weight: 12,625 kg * Payload: 6,375 kg * Color: Green/white Sweeper body: * Manufacturer: VAL?AIR * Debris container capacity: approx. 9 m³ * High-pressure cleaning system * High-pressure output: up to 200 bar * Suction sweeping system * Hydraulically driven rotary brushes * Sweeping unit located beneath the vehicle * Rear discharge via tilting debris container * Suitable for street, area, and municipal cleaning Equipment: * Air conditioning * Manual transmission * Work lights * LED warning bar on the cab * Rear rotating beacon * Striking red and white safety markings * Exterior mirrors with wide-angle mirrors * Municipal vehicle equipment * Steel rims Inspection and functional testing are possible after prior arrangement. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are subject to change.

Condition: used, Year of construction: 2014, Hardinge GS200 CNC Lathe 2010 Hardinge GS200 CNC slant bed lathe equipped with Fanuc Series Oi-TD control. ----- Control Nljdpfxoylchtj Akioh Fanuc Series Oi-TD CNC Control ----- Capacity Chuck Size: 3 Jaw Bar Capacity: 52mm Maximum Swing: 457mm Maximum Cutting Diameter: 284mm Maximum Cutting Length: 406mm Distance Between Centres: Not specified ----- Main Spindle Maximum Spindle Speed: 5,000 RPM ----- Turret Number of Stations: 12 ----- Axis Travels X Axis Travel: 218mm Z Axis Travel: 406mm ----- Accessories Hydrafeed Multifeed 65 Barfeed Swarf Conveyor Control: Fanuc Spec: Spindle bore 52 mm | Max Swing 457 mm | Travel X 218 Z 406 mm Accessories: Tailstock, parts catcher & 8" Power Chuck, Swarf conveyor, Collet chuck

Condition: ready for operation (used), Allmatic-NC LC 160/200 Machine Vice Stage 1 = 15 kN Stage 2 = 30 kN Stage 3 = 45 kN Stage 4 = 60 kN Pressure sensor is not included in the scope of delivery! You are welcome to come by for an inspection. We can also organize an affordable shipping service for you! You will receive a proper invoice. Nodpfxsyilc So Akielh A net invoice can also be issued for foreign customers, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and take a look at our other offers as well. All specified company names and trademarks are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the item description are possible and reserved.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, total length: 1,560 mm, total width: 970 mm, total height: 160 mm, tank capacity: 320 l, empty load weight: 1,050 kg, power: 13.5 kW (18.35 HP), electrical fuse: 50 A, New machine with a 24-month warranty. Advantages: + Robust construction + Boiler, center rod, and spiral made of stainless steel Nlodpfx Ashyc T Eskieh + Drive with two motors (spiral & boiler) + Mobile machine, on swivel wheels, with a fixed boiler + Flour dust hood closes gently with dampers, with automatic shut-off + Dirt protection cover for the feet + Short kneading time with excellent results + Control panel with push buttons for easy operation, with 3 timers + 1 reverse gear for mixing, 2 forward gears for kneading + Up to 99 different mixing/kneading programs can be stored + Switch for manual or automatic operation + Fast supply of spare parts within 1-2 working days Special accessories, optionally available at an extra charge: Soft starter - Machine can be operated with 32A instead of 63A Extra charge: + €1,630.00 net Technical data: - Flour capacity: 10 - 120 kg - Dough capacity: 15 - 200 kg - Boiler volume: approx. 320 liters - Outer diameter of boiler: 970 mm - Motor power: 13.5 kW (kneading spiral & boiler drive) - RPM at 50Hz (1st / 2nd gear): 98 / 196 - Connection values: 400V - 3Ph - 50Hz - 63A CEE plug - Dimensions in cm: 97 x 156 x 160 (W x D x H) - Height with flour dust hood open: 220 cm - Height top edge of boiler: 94 cm - Net weight: 1050 kg

Condition: refurbished (used), NIMO-KG SKV 200 MK Njdshua Hdjpfx Akislh ID.NO. 2196 Nimo-KG SKV 200 MK trolley lift for 200 liter trolleys. Dimensions 110 x 130 cm Height 480 cm Tipping height 380 cm.

Condition: excellent (used), NIMO-KG SKV200 MK Nljdpfx Aeiz Awwjkieh ID.NO. 2470 Nimo-KG SKV 200 MK meatbin lifter for 200 liter meatbins. Dimensions W 130 D 120 cm Total height 400 cm. Tip height 302 cm.

Condition: excellent (used), Ball mill Vollrath EFC 200 Wet and dry grinding Iron-free grinding with steatite balls Lining made of hard porcelain Volume 200 l Drive power 1.4 kW Speed 42 1/min Three ball mills mounted on a steel frame In very good, ready-to-use condition, directly from production!!! Nledpfsk D Dwtjx Akijh

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Nsdpfx Akohtaaqjiolh Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Year of construction: 1980, condition: good (used), 17 rolls, Ø 90 mm strip width: 50 - 200 (250) mm Nledpfx Aodnzvdskish strip thickness: 2 - 10 mm

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 160 bar Nljdsb A I Sxjpfx Akijh - Flow rate: 3 l/min per pump -Drive: 0.55 kW 1360 rpm -Hydraulic tank Quantity: 1 piece available -Weight: 95 kg

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE Nlsdpfxjtt Da Is Akioh MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390mm MAX. TURNING LENGT 507mm SWING OVER BED 680mm OVER CROSS SLIDE 510mm BAR WORK CAPACITY 51.0mm MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING MACHINE MANUALS SWARF BIN MIST EXTRACTOR VERY CLEAN

Condition: good (used), Engine freshly overhauled (over 12tys zl). 100% operational I invite you to contact me Nedpfjtt T Nfsx Akislh

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: Reg Nr. 976, Machine Name: Paddle dryer Used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 U/min Pressure range: -1 to 3 bar (drying chamber), 6 bar in the double jacket Material: Stainless steel Driving force: 5,5 KW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: Stainless steel 1.4571 Gear box: Stirnradgetriebemotor Equipment: Double jacket, mechanical seal, shaft heater Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Nodpsitcvuefx Akiolh Accessories: Base frame, Double coat, Mechanical seal, PT100 thermometer, Shaft heating with Maierkopf HWR 225, Sight glass, Technical documentation. Condition: Used very good Price: on request

Condition: new, clamping range of chuck 10 - 200 mm height 67,5 mm daylight 65 mm external diameter Futter 200 mm external diameter Spannhebel 360 mm weight 4 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. Njdpfx Asfv Awlskijlh The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck.

Condition: used, mileage: 4,710 km, power: 55 kW (74.78 HP), first registration: 07/2025, fuel type: diesel, color: white, next inspection (TÜV): 07/2026, driver cabin: other, gearing type: other, Year of construction: 2025, operating hours: 165 h, total length: 5,090 mm, total width: 1,420 mm, total height: 2,340 mm, maximum speed: 50 km/h, * 224901 Swingo 200+ 2 Brush System * 225101 Euromot 5 Engine 55 kW (75 hp) * 225201 500-hour Long Life Oil * 225404 50 km/h * 225300 Hydro-pneumatic Suspension * 231701 Noise Reduction for Cabin & Container * 187001 Steering Wheel Knob * 226502 Radio DAB+ * 226601 Rear View Camera * 226701 Suction Nozzle Camera * 226801 Reverse Warning System, Switchable * 226901 12 Volt Socket * 235001 Standard Monitor * 226301 3-Point Safety Belt for Driver Nledpfxoz Sc T Uo Akish * 226401 2-Point Belt (Lap Belt) for Passenger * 230501 Rotating Beacon, Foldable * 228503 Sweeper Brush, Mixed (Poly/Steel) * 228801 Rollers for Suction Nozzle instead of Skids * 227301 Independent Brush Control * 227401 C-Shaped Brush Arms * 228701 17 mm Rubber Suction Nozzle * 228901 Stainless Steel Container Pipe * 229201 Hand Suction Hose Preparation * 190701 Standard Paint, RAL 9016 White * 1317SWINGO Operating Manual * 232601 Wheel Chock with Holder * 100901SWIN Modem Kit IntelliOPS Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes, and prior sale. * Offer subject to change. * Photos may vary. Price applies to the current condition. * All information without guarantee.

Condition: excellent (used), Year of construction: 2008, CNC machine for applying Stellite to the teeth of bandsaw blades / Type GPA200 Stellite application machine Technical data for bandsaw blades: Blade width: 80 - 360 mm Blade length: 6 - 18 m Blade width: 35 - 100 mm Blade thickness: > 0.6 mm Technical data for frame saw blades: Blade width: 80 - 200 mm Nsdpfx Aez Hdqbekiolh Blade thickness: > 1.6 mm Tooth pitch length: < 1700 mm Technical data for mini frame saws: Blade width: > 35 mm Blade thickness: > 0.5 mm Tooth pitch length: < 700 mm Rake angle: 10 - 40° External compressed air supply: < 6 bar Stellite diameter: 0.76 - 4 mm Working speed in teeth/minute: < 10 teeth/min Welding unit - large burner Current: < 150A, operating mode: Mono-gas/Bi-gas, plasma gas flow rate: 1.5 - 2 l/min, shielding gas flow rate: 5 - 8 l/min Welding unit - small burner Current: < 120A, operating mode: Mono-gas/Bi-gas, plasma gas flow rate: 0.2 - 0.6 l/min, shielding gas flow rate: 2 - 4 l/min Additional slider

Condition: new, Year of construction: 2020, power: 85 kW (115.57 HP), gearing type: other, driver cabin: other, Vehicle location: Bovenden Maximum output in kW: 85 RPM: 1000 Maximum pressure: 150 bar Nsdpez Hd T Nofx Akiolh New, from stock, manufactured in 2020! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,000 h, Machine in very good condition, only 17.000 hours. Nedpez Ayq Eofx Akiolh Fully functional.

Condition: good (used), Year of construction: 2005, operating hours: 76,988 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, plate length: 600 mm, plate height: 670 mm, total length: 4,050 mm, total width: 1,930 mm, total height: 2,200 mm, overall weight: 5,200 kg, Equipment: documentation/manual, ENGEL Victory 200/80 Tech Stock No.: 503561 Manufacturer: ENGEL Type: VICTORY 200-80 Tech Control System: CC100 Year of Manufacture: 2005 Operating Hours: 76988 h Technical Data - Clamping Side Nledpez Ayttsfx Akish Clamping Force: 800 kN Platen Size h x v: 670 x 600 mm Minimum Mold Height: 250 mm Maximum Mold Height: 700 mm Opening Stroke: 450 mm Ejector Stroke: 100 mm Ejector Force: 40 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Tool Weight: 675 kg Technical Data - Injection Side Screw Diameter: 30 mm Injection Volume: 99 ccm Injection Pressure: 1450 bar Screw Length: 20 l/d Screw Stroke: 140 mm Plasticizing Rate: 17 g/s PS Free Injection Flow Rate: 150 g/s PS Number of Heating Zones: 4 Nozzle Length: 200 mm Dimensions & Weight Machine Dimensions L x W x H: 4.05m x 1.93m x 2.2m Total Weight: 5200 kg Equipment Screen text: German CEE socket 16A Core pull hydraulically 1x Machine including conveyor belt Machine including handling system Machine with water manifold Machine without material hopper Leveling elements Schuko socket 10A Technical Data - Handling System Machine Type: Linear handling system Manufacturer: Engel Control System: ER-HLI 31 VC Year of Manufacture: 2005 Handling System Weight: 2 kg Screen Text: German Total Weight: 250 kg

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,425 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, Machine completely cleaned and overhauled. 0.1 mm option available. Nlsdpfsy Tvtmsx Akish Available for viewing at our facilities in Semsales, Switzerland.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Nedpfx Akoq H Sqdsijlh Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: used, Year of construction: 2005, operating hours: 95,000 h, clamping force: 200 kN, displacement volume: 113 cm³, injection pressure: 2,178 bar, overall weight: 11,500 kg, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Nlodjz A Ialspfx Akijh