Used Kappa 550 for sale (2,827)

Condition: used, Year of construction: 2019, machine/vehicle number: 604.11.059.19, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 200 mm, saw blade diameter: 550 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,000 rpm, total length: 3,200 mm, total width: 450 mm, total height: 1,200 mm, overall weight: 1,200 kg, table height: 1,200 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Felder Kappa 550 circular saw, 0-45 degree swivel, maintenance-free, saw blade D=250mm-550mm Extension arm 1250mm x 650mm, cutting length 3200mm, crosscut function. Kappa 550X - motion control with LCD screen with touch function...etc. Circular saw table extension 1620mm Additional light, scoring unit, red LED strip marks the danger area. Scoring unit Control with 3 controlled axes. Cedpfe Ad Itusx Aqveri Cutting width 1250mm, aluminum, anodized. Controlled parallel fence 1250mm Sliding table 3200mm Rip fence 3200mm with 2 fence blocks, digital The machine was used in a two-person business and has hardly been used for the past 2 years. The saw was only used for fine work (not for carpentry). Selling due to retirement. If interested, please request more information.

Condition: used, Year of construction: 2020, Panel saw Manufacturer: Felder Format4 Type: Kappa 550 Year of manufacture: 2020 Technical data Crsdpfxe Ah E Rzj Aqvoi - Circular saw unit, 0 - 46° swivel, maintenance-free, - Maximum cutting height 200mm, under-table dust extraction - Upper guard, cutting width 1000mm, hood for 90° cuts and hood for angled cuts, height-adjustable and can be swiveled away - Dust extraction connection 100mm - Circular saw table extension up to 1200mm behind the saw axis - Parallel fence with fine adjustment, fence ruler length 1200mm, can be swiveled - Crosscut fence 3200mm, swivels 90-45° - Kappa 550 control unit with programmable angle and height positioning, cutting height correction during swiveling - Machine stand Kappa 550, circular saw table 1180x610mm - Electrical system Kappa 550, 2x400V 50Hz CE, 10 kW S6 with star-delta starter - 3 speeds 3000/4000/5000 rpm. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, saw blade guard, scorer, Format panel saw / table saw Format4 Kappa 550 by Felder, purchased on May 26, 2021, for precise longitudinal, cross, and miter cuts in wood and panel materials. Professional saw for carpentry, interior design, and workshop use. Key technical data: - Machine type: Format panel saw / table saw - Saw blade diameter: 250–550 mm - Max. cutting height: approx. 202 mm at 90° / approx. 140 mm at 45° - Swivel range of the saw unit: 0°–46° - Cutting width: depending on the model, approx. 1000 / 1250 / 1600 mm - Cutting length: depending on the model, approx. 2200–3700 mm - Speeds: 3000 / 4000 / 5000 rpm, optionally infinitely variable 2000–6000 rpm - Motor power: approx. 10 KW - Precise format table for repeatable, accurate cuts - Suitable for solid wood, panel materials, and precise furniture / interior design work - Core machine for professional woodworking shops, carpentry workshops, training workshops, and makerspaces Codpfxozuywio Aqvsri No warranty.

Condition: excellent (used), Year of construction: 2010, Panel saw Manufacturer: Felder Type: Kappa 550 Year of manufacture: 2010 Sliding table length: 3,200 mm Cutting width: 1,250 mm Cutting height: max. approx. 204 mm Power: 7.5 kW Max. saw blade diameter: 550 mm Height adjustment: Electric Angle adjustment: Electric Cjdpfjzy Uzyex Aqvsri Cutting width display: Digital Scoring saw: No Motor brake: Yes

Condition: used, Year of construction: 2021, - Cutting width: 1250 mm - Cutting length: 2800 mm Panel saw Manufacturer: Felder Format4 Type: Kappa 550 Year of manufacture: 2021 Technical data - Saw blade: 250 - 550 mm - Cutting height: 202 mm (90°), 140 mm (45°) - 3 speeds: 3000/4000/5000 RPM Codpszuy A Ejfx Aqvori - Cutting width: 1250 mm - Cutting length: 2800 mm - Control system: Kappa 550 e-motion - Surface area of the extension table: 1250 x 650 mm - Telescopic fence allows for crosscuts up to 3200 mm - The crosscut fence can be swivelled from 90° to 45° - Circular saw extension of 1200 mm behind the saw blade axis - The positioning of the parallel fence is done electronically via a ball screw integrated dust-free into the circular saw table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2016, Format 4 Kappa 550 Positioning control e-motion – TFT screen Year of manufacture: 2016 320 cm sliding table 5.5 kW motor with brake Scoring unit control Max cutting height: 200 mm Saw blade: 250 - 550 mm Speeds: 3000 / 4000 / 5000 rpm Scoring blade rotation speed: 9000 rpm Motorized rip fence Saw blade tilting up to 45 degrees, single-sided Electric height adjustment Operator panel at eye level Crosscut fence with digital display Movable support rail with digital angle display Crosscut fence with length compensation Extraction connection: 120 mm and 100 mm Extension arm with swing-away function Cutting width: 1348 mm Crodpsx Rugtefx Aqvji Crosscut fence up to 3200 mm Control station on sliding table Dimensions (without extension arm): 3400 x 2200 mm Weight: 1300 kg

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 2022/5/18, functionality: fully functional, rotational speed (max.): 2,800 rpm, overall weight: 480 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw Blade I Saw blade diameter: 550 mm Bore diameter: 50 mm Motor power: 3 kW Operating voltage: 400 V Speed: 2,800 rpm Swivel range: -70° / 90° / 45° Crodpe Ah Rh Rsfx Aqvei Saw Blade II Saw blade diameter: 350 mm Bore diameter: 40 mm Motor power: 2 kW Operating voltage: 400 V Speed: 2,800 rpm Stock dimensions: max. 210 × 100 mm Vertical cutting height: 150 mm MACHINE DETAILS Air connection: 8 bar Feed: pneumatic Dimensions & Weight Dimensions (W x D x H): 1,200 x 1,000 x 1,400 mm Weight: 480 kg EQUIPMENT Pneumatic feed with two-hand control Operating manual available

Condition: ready for operation (used), Year of construction: 2018, Komax Wire Kappa 310 Automatic Cable Cutting and Stripping Machine Codpfx Aqo Ah Rhmjvsri Year of manufacture: 2018 Cable cross-section, stranded conductor: 0.02-6mm² Max. outer diameter: 10mm Length accuracy: ±(0.2%+1mm) Cable length range: 1mm-700000mm Max. cable transport speed: 4.0m/s Quantity range: 1-99999 Max. stripping lengths: Full stripping: Side 1: 100mm Side 2: 40mm Partial stripping: Side 1: 999.9mm Side 2: 999.9mm Multiple stripping: Side 1: 999.9mm Side 2: 999.9mm Dimensions: 465mm x 460mm x 385mm (W x D x H) Weight: approx. 25 kg You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: used, Year of construction: 2019, Suitable for cleaning cutting fluids used in grinding carbide. Codpfx Aqo Ah Et Severi Equipment: - 1 filter housing - Manual backwash Filterleistung: 120 l/min Tank capacity: 550 l Dimensions L x W x H: 1590 x 1150 x 1975 mm mass: 750 kg Connected load: 2,2 kW (400 V/ 50Hz) colour: Light gray

Condition: excellent (used), Year of construction: 2018, operating hours: 3,843 h, functionality: fully functional, machine/vehicle number: 320000620, turning length: 1,240 mm, turning diameter over cross slide: 480 mm, turning diameter: 480 mm, spindle motor power: 33,000 W, spindle speed (max.): 3,250 rpm, spindle bore: 115 mm, travel distance X-axis: 307 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, mount diameter: 315 mm, rotational speed (max.): 3,250 rpm, rotational speed (min.): 20 rpm, torque: 630 Nm, bar passage: 102 mm, workpiece weight (max.): 150 kg, feed rate X-axis: 30 m/min, feed rate Y-axis: 22 m/min, feed rate Z-axis: 36 m/min, total height: 2,150 mm, total length: 4,800 mm, chuck outer diameter: 315 mm, total width: 2,100 mm, collet bore: 102 mm, bar diameter (max.): 102 mm, quill stroke: 120 mm, quill diameter: 100 mm, quill travel distance: 1,200 mm, swing diameter over cross slide: 480 mm, spindle nose: A2-8, swing diameter over bed slide: 700 mm, overall weight: 7,200 kg, spindle diameter: 140 mm, tool length: 250 mm, feed force X-axis: 7,000 N, feed force Y-axis: 7,000 N, feed force Z-axis: 11,000 N, turning diameter over bed slide: 700 mm, Equipment: rotational speed infinitely variable, For Sale: DMG MORI CLX 550 CNC Lathe (Model 2018) High-performance 4-axis turning center in excellent condition, ideal for heavy-duty and precision machining. Equipped with key factory options for maximum efficiency and versatility. Control System & Software: CNC Control: DMG MORI SLIMline® 19" Touch Control with Siemens 840D sl Operate Software Option: Integrated DXF Reader for fast, direct import and programming of 2D CAD files Key Technical Specifications & Features: Year of Manufacture: 2018 Control Unit: 4-Axis Configuration Bar Passage / Capacity: Extended Ø 102 mm passage option Spindle Speed: Up to 3,250 rpm Credpfx Aqj Agvvgovoi Spindle Torque: 630 Nm (40% ED) Turning Capacity: Max. turning diameter Ø 480 mm | Max. turning length 1,240 mm | Swing over bed Ø 700 mm Tailstock Setup: Includes base and hydraulic interface preparation for steady rest Included Accessories & Tooling Package: Tool Setter (Automatic tool measuring probe) Part Catcher & Bar Puller Bar Feeder Interface / Preparation Driven Tooling Included: 1x Angular Driven Tool Holder (90°) 4x Straight Driven Tool Holders Collet Chucks: 2x ER32 & 2x ER40 Clean, well-maintained machine ready for immediate production.

Condition: ready for operation (used), functionality: fully functional, WALTHER CN 550 PN TROWAL & RÖSLER Z 300 Turbo Floc Centrifuge -Walther Trowal & Rösler Turbo Floc Centrifuge -Coating in good condition -Rotational speed: 1460 RPM -Capacity: 550 liters -Motor: 3.5 KW Csdpfx Ajz Dg Iksqvori -Pneumatic soundproof cover -Control cabinet -SEPARATION UNIT -Dirty water / drain system -Compound and 2 x sets of sliding stones -Documentation Dimensions: L x W x H 2 x 1.8 x 1.8 meters / Weight: 1500 kg RÖSLER Z 300 TURBO FLOC - CENTRIFUGE -Year of manufacture: 1996 -Rotor speed: 3160 RPM -Power: 4 KW -Max. throughput: 800 liters / hour -Documentation -Dimensions: L x W x H 1.7 x 1 x 1.6 meters / Weight: 480 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2020, swing 700mm, maximum turning diameter 480mm, Cedpfx Aqoz Ebmwevori bar capacity 80mm, maximum turning length 1240mm, spindle speed 3,250 rpm, , 12 station turret, spindle power 25.5Kw, siemens 840D Slimline control, tool setter, coolant, Swarf Conveyor.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 2,350 h, travel distance X-axis: 308 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, spindle motor power: 22,000 W, bar diameter (max.): 102 mm, controller manufacturer: SIEMENS, controller model: 840 D, number of slots in tool magazine: 12, number of axes: 4, This 4-axis DMG MORI CLX 550 V4 was manufactured in 2020. It features a turning length of 1,225 mm, X-axis travel of 307.5 mm, and Z-axis travel of 1,240 mm. The machine is equipped with live tools, a spray gun, a hand wheel, and a tool setter. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V4 horizontal turning machine we have for sale. Contact us for further details. • C and Y axis Codpoz Tqzzjfx Aqvori • 102 mm spindle through-hole • Turning length: 1225 mm • Condition: Well maintained Additional equipment • Spray gun • Hand wheel (MPG) • Tool setter • External chuck flushing • Clamoing with balanced pressure for main spindle • SMW Autoblock BH-D 320/A2-8 • Double cartridge filter • 12 bar high pressure • Bar interface • Chip conveyor • Frequency 50 cykles • Alternating speed cycle Technical Specification Counter Spindle No Driven Tools Yes Taper Size VDI 40

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Note: Operator terminal and angle scale on the right side! Cutting length: 3200 mm Max. saw blade overhang: 100 mm Feed rate, continuously variable: 5-100 m/min; return speed: 130 m/min Saw carriage guided on round shafts Drive via gear and rack and pinion system Automatic cutting length detection via laser sensor on the saw carriage Quick-change system for main and scoring saw blade (ProLock) Cutting direction against the stop Motor: 13.5 kW, total connected load: 18 kW, rated current: 38 A Electronic cutting height adjustment (continuously variable) for the sawing unit Raising and lowering of the sawing unit by means of a positioning drive Dimensional measurement via non-contact magnetic measuring system Including nesting program Scoring saw adjustment, horizontal and axial, from the control panel via electric servo motors Scoring saw unit with pneumatic lowering, scoring saw motor 2.2 kW Manual pressure regulators for package clamps and pressure bar for sensitive materials Tilting table on the left: 2300 x 600 mm with air cushion Solid stop rail with 2000 mm 2 side tables, 2300 mm with air cushion Material pusher, cutting length 3200 mm Crodpo Adv Ruofx Aqvoi Feed rate: 25 m/min; return speed: 80 m/min Rear support table with 9 double roller tracks Package clamps, 6 pieces, 2-finger design, opening height 80 mm 3 veneer stops for cutting panels with protruding veneers Device for automatic positioning of the trimming position by the material pusher Lateral pressing device for workpieces from 20 to 1200 mm Modular control system with 24" TFT flat screen PC with Windows 7 Pro operating system With thermal label printer Availability: approx. January 2027 Location: North Rhine-Westphalia

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1018, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, controller model: Fanuc oi-MB, spindle speed (max.): 8,000 rpm, operating hours of spindle: 12,550 h, number of spindles: 1, For sale: used AFM R-550 Harnaś milling machine. Vertical machining center. Year of manufacture: 2004. Serial number: 1018. X/Y/Z travel: 550 x 410 x 510 mm. Table size: 1120 x 360 mm. Spindle speed: up to 8,000 rpm. BT40 taper. Fanuc control system. Spindle overhauled in October 2024. Crodj Aa N H Iepfx Aqvei First owner. Please contact me for further details.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 3,613 h, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Z-axis: 1,240 mm, spindle motor power: 33,000 W, overall weight: 7,200 kg, controller manufacturer: SIEMENS, controller model: 840D with ShopTurn, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI CLX 550 V3 was manufactured in 2023. It features a maximum turning diameter of 480 mm and a turning length of 1240 mm. The machine is equipped with a powerful spindle capable of 3,250 rpm and a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V3 horizontal turning machine we have for sale. Contact us for further details. • Control panel: DMG MORI SLIMline Multi-Touch, 19" touchscreen • Axes: 3 (X, Z, C); no Y-axis; no counter spindle Crjdpoz Ipilefx Aqvsi • Spindle operating hours: approx. 3613 hWorking capacity and axes • Max turning diameter: 480 mm • Max turning length: 1,240 mm • Swing over bed: 700 mm • Swing over cross slide: 500 mm • Rapid traverse X/Z: 30 m/min • C-axis: main spindle CMain spindle and chuck • Spindle nose: A2-8 • Bar capacity: 102 mm (upgraded main spindle) • Spindle power: 33 kW @ 40% DC / 22 kW continuous • Spindle torque: 630 Nm @ 40% DC / 420 Nm continuous • Chuck: SMW BH-D 320 / A2-8, D103 mm (as specified) • Function: differential clamping pressureTurret and driven tools • Turret: 12-position VDI40 with 6 additional BT stations • Driven tools: up to 4,000 rpm • Driven-tool power/torque: 5.44 kW @ 40% DC; 20 Nm @ 40% DCTailstock • Travel: 1,200 mm • Centre taper: MT5 • Max thrust: 12 kNEquipment and options (machine) • Setup package • Tropical climate package • 12-bar coolant supply • Manual working-area washdown gun • Variable spindle speed software option • DMG MORI IoTconnector • Digital Manufacturing PackageConstruction • Inclined cast-iron bed • Linear guideways, 45 mm width Additional equipment • Mechanical oil mist extraction unit, 1,100 m³/h • Tooling: • Set of 12 tool holders • Set of 6 boring tool holders • ALGra driven-tool holder set Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2016, operating hours: 9,113 h, load capacity: 2,500 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, Linde H25D-02 Triplo 550 Freelift / Sideshift / Fork Adjuster, VW Diesel, 2016 Crodpe Ahyykefx Aqvsi A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 4,035 mm, travel distance Y-axis: 1,720 mm, travel distance Z-axis: 380 mm, Equipment: chip conveyor, documentation/manual, We are offering this ready-to-use Weeke Optimat BHC 550 machining center, year of manufacture 2003. Manufacturer: Weeke Model: Optimat BHC 550 Year of manufacture: 2003 Crjdpsx Nw Drsfx Aqvsi Condition: ready for operation Machine type: machining center If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, saw blade diameter: 550 mm, grinding wheel diameter: 150 mm, total width: 1,200 mm, total length: 1,200 mm, total height: 1,250 mm, type of input current: three-phase, input current: 4 A, input frequency: 50 Hz, grinding spindle motor power: 1,900 W, input voltage: 400 V, overall weight: 220 kg, spindle speed (min.): 3,700 rpm, Equipment: rotational speed infinitely variable, Loroch SW 550 machine in good working condition, ready for operation. The machine is suitable for professional workshop use. - saw blade dia. from 100 - 550mm - suitable for HSS saw blades for wood and metal cutting. - HSS saw blades geomeries - A, B, BW, C - Water cooling - additional device for shaping band saw blades Cjdjy Sgqtspfx Aqvori - Manual in Czech language (but it is simple machine)

Condition: good (used), Year of construction: 2008, operating hours: 6,623 h, load capacity: 3,500 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,850 mm, Toyota 52-8FDJF35 Triplo 550 Freelift / Mast Tilter Diesel 2008 A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). Crodpfj Adry Ssx Aqvji You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2025, condition: used, M.S.K. / Tryma OMRM 133 Sawing Machine + TM-127 Copying Router (Set of 2 machines, 2025) We offer this complete set of two virtually new machines for processing aluminum and PVC profiles (Year of manufacture: 2025). The machines can be purchased together as a set or individually. 1. M.S.K. / Tryma OMRM 133 (TM-133) Automatic 2-Head Sawing Machine - Asking price for individual sale: €31,500 excl. VAT (New value: €37,420 excl. VAT) - Specifications: Year of manufacture: 2025 | Serial number: 25DCM330004 | Power: 6.5 kW | 400 V (50 Hz) | 1220 kg - Suitable for quickly and accurately sawing PVC and aluminum profiles - Equipped with 2 saw blades, diameter 550 mm - Console with industrial PC and integrated label printer - Automatic opening and closing of the safety guards - Horizontal and vertical pneumatic profile clamping - Fixed left head and automatically adjustable right head with roller conveyor Cjdpfxoy Encwe Aqveri - Servo motor guarantees fast movement and precision via linear guides - Pneumatic tilting of heads (90° / 45° inward) + mechanical adjustment for intermediate angles - Sawing length max. 5,000 mm (overlengths up to 7,500 mm possible, min. length 290 mm) - Including central support for support and dust extraction option 2. Tryma TM-127 Manual Copying Router Machine (3 spindles) - Asking price for individual sale: €9,500 excl. VAT (New value: €11,330 excl. VAT) - For quickly and easily routing PVC and aluminum profiles - 3-sided processing without reclamping (1 vertical and 2 horizontal copying heads) - Horizontal and vertical templates with standard operations - Automatic locking of cutting depth via pneumatic clamps - Horizontal and vertical pneumatic pins (4, 6 and 8 mm) - Smooth movement via recirculating ball bearings, shock absorbers and ergonomic handle - Including roller conveyors of 1,500 mm (left and right) and pneumatic cooling spray - Profile height: min. 40 mm / max. 110 mm | Profile width: max. 150 mm If you have any questions, are interested in the complete set or an individual machine, please feel free to send us a message or call us.

Condition: used, Year of construction: 2021, Vertical panel dividing saw Manufacturer: Felder Format4 Type: Kappa V80 Csdpfx Aezuy Dvjqvori Year of manufacture: 2021 Technical data Saw unit Motor with 5.5 kW power Saw blade diameter: 300 mm Cutting depth: 80 mm Cutting length: 5300 mm Cutting height: 2200 mm Maximum horizontal cut: 2080 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, max. cutting width: 5200 mm max. cutting height: 2200 mm saw blade diameter: 250 mm Crjdpfx Aqsz Aibgovei max. processing thickness: 60 mm saw blade arbor: 30 mm lower support: plastic material support: plastic strips, retracting measuring system: digital display swiveling saw head: manual saw feed: manual mounting: free-standing extraction: external locking of saw beam: manual weight approx.: 1200 kg motor power: 4.2 kW Location: Nattheim

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 22 kW (29.91 HP), - Mill for, e.g., processing lumps - Unused machine - Open rotor - Grinding mechanism 650 mm x 550 mm - Control system Spare parts can be supplied. (Sieve, blades, etc.) Cjdpfxsp E Anve Aqvsri

Condition: ready for operation (used), Year of construction: 2013, overall weight: 4,600 kg, Panel saw manufactured in 2013. This FORMAT4 Kappa Automatic features a robust design with a weight of 4,600 kg and a powerful 14.0 kW motor. It includes an integrated control terminal with monitor, keyboard, and mouse, along with safety wire fencing and roller material support tables. If you are looking to get high-quality panel cutting capabilities, consider the FORMAT4 Kappa Automatic machine we have for sale. Contact us for further details. - Voltage: 400 V- Phase: 3-phase- Frequency: 50 Hz- Power: 14.0 kW- Current: 28.0 A- Weight: 4,600 kg Cedpfx Aezx Uv Ujqvori