Used Eks 310 for sale (5,084)

Condition: good (used), For sale: PWB Swiss measuring device, model TOOL MASTER 310 Very good condition, complete, ready for operation Package includes: • TMA 21 control panel • LED displays • Dial gauge • Measuring socket for holders Features: • X and Z axis measurement • Tool setting and calibration for CNC tools • Easy operation • Length and diameter measurement Pjdpfx Aew Humlsg Degw Original user manual included Brand: PWB Swiss Model: Tool Master 310

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW It has not been used since 2021. Podpfxowfqh Ae Ag Dogw The machine was stored in a closed production hall for the entire period and is fully functional. After purchasing the machine, the electrical cables were replaced with new ones. We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Maximum working width: 305 mm Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Maximum workpiece height on 4 sides: 160 mm Minimum workpiece height: 17 mm driven upper and lower feed rollers

Condition: like new (used), Year of construction: 2011, operating hours: 250 h, machine/vehicle number: 02573550-060, Used Diesel Generator – Cummins | 352 HP / 263 kW Standby | Enclosed | With Fuel Tank Technical Specifications: Engine Brand: Cummins Pedjwzirxepfx Ag Dogw Engine Model: QSL9-G5 Standby Power: 352 HP / 263 kW at 1800 rpm Prime Power: ~310 HP / 231 kW at 1500 rpm Voltage: 400/231 V Frequency: 50 Hz RPM: 1500 Fuel Type: Diesel Cooling: Liquid-cooled Control Panel: Included Fuel Tank: Integrated base frame fuel tank (visible on photos) Condition: Used – very good visual and operational condition Soundproof Enclosure: Yes Manufacturing Label: Frame code 4A9A145639

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: The machine was operated in Germany and regularly maintained (last service by Homag in 11/2024) Features and technical data: - Workpiece thickness min.: 12 mm - Workpiece thickness max.: 60 mm - Workpiece min. (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) - Edge thickness min.: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max.: 3 mm (coil material) / 20 mm (strip material) - Feed speed: steplessly adjustable 18–25 m/min (frequency-controlled) - Gluing system: EVA hot-melt adhesive - Glue application (tank / cartridge / nozzle): Melting unit with granulate hopper - Glue volume / cartridge size: Granulate hopper, melting capacity 18–35 kg/h, level-controlled - Heating time: approx. 8–10 min - Edge magazine (positions): 2 coils (automatic coil change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure section: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: HL84 trimming unit, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) Pgsdewx Aaqjpfx Ag Dow - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: FK13 profile milling unit, automatic 8-position tool changer (R = 2 mm) - Bevel / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in FA11 finishing unit - Jointing unit: KAL310/A20/S2 jointing milling unit, 2 × 3 kW - Workpiece pre-heating: available - Release agent spray device: top / bottom, type 2929 (F.01) - Extraction nozzles: multiple Ø 100 mm (individual extraction per unit) - Control system: power control PC22 (industrial PC, woodCommander running Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant per EU directive 98/37/EC Dimensions / required floor space: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg Please note: The return conveyor shown in the pictures is not included in the scope of delivery! Availability: short-term Location: Lithuania

Condition: used, Luenette Podpfjcrcxtox Ag Degw Height without foot 290 mm Foot width 50 mm Distance 170 mm

Condition: excellent (used), Year of construction: 2005, Connection values: Single phase, AC 50 ... 60 cycles Pedpfxoxmhhys Ag Djgw Voltage switchable 200/220/240 V ± 10 % Power consumption: 110 W Heat emission: 95 kcal/h Application: Form depth 3…12 1/2" // Form width 148…470 mm Paper weight: Single webs 45…170 g/m2 // Multiple sets 125 ... 300 g/m2 Stack height up to ca. 300 mm The machine worked together in production with MICRO-FORMS LABELLER 18S (Sticks labels on sheets) // Ref. No.: 40016.25

Condition: good (used), Year of construction: 1992, functionality: fully functional, double-row line boring machine GANNER with 21 spindles each Pgedpsxlt T Ssfx Ag Dsw

Year of construction: 2003, condition: ready for operation (used), - USED - 7-AXIS SYNCHRONIZED CNC PRESS BRAKE    AXIS: Y1 - Y2 - X1 - X2 - R - Z1 - Z2 BENDING LENGTH: 3100 mm TONNAGE: 130 ton UPPER BEAM TRAVEL: 400 mm APPROACH SPEED: 150 mm/sec Podpfxsuqqw Ej Ag Djgw RETURN SPEED: 150 mm/sec WORKING SPEED: 1-10 mm/sec MOTOR POWER: 18,5 kW WEIGHT: 14200 Kg OVERALL DIMENSIONS: 4435 x 2734 x 3095 mm NOTE: INTERNAL AND EXTERNAL POSITIONERS

Condition: used, Centerless grinding machine ESTARTA 310 Pjdpfeq Ehqfex Ag Dogw

Condition: used, TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine, cooling device, cooling unit -Manufacturer: Cloos, cooling unit for TIG welding machine -Type: unfortunately no type designation Pgodpfxsqgi Ide Ag Dsw -Flow rate: l/min -Quantity: 2x cooling device available -Price per piece -Dimension: 620/310/H235 mm -Weight: 15 kg/pc.

Condition: used, mileage: 359,365 km, power: 265 kW (360.30 HP), first registration: 12/2017, fuel type: diesel, number of seats: 37, gearing type: automatic, next inspection (TÜV): 08/2024, emission class: euro6, color: green, brakes: retarder, Equipment: ABS, air conditioning, parking heater, Green environmental badge, Euro VI engine, gearbox type ZF-Ecolife, ABS, ASR, kneeling, retarder, digital tachograph, air conditioning, Webasto additional heating, loudspeaker, air doors at the front and wide middle door, standing places: 54, number of seats: 34 + 1, folding seats 2x, Durofol seats, 1x stroller space, 1x wheelchair space, grab bar, single glazing, wheelchair ramp, Lawo Luminator Matrix, 2x roof hatch, electrically adjustable outside mirrors, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us! Pgedpfx Agsvnpt Do Dow

Condition: used, machine/vehicle number: 19138, Zusammentragmaschine / Collating Machine PLOCKMATIC 310Baujahr / Year 1998 - Serial-No. 310034919 Pgodeh Axwzjpfx Ag Dow 10 Staionen Zusammentragmaschine / 10 Stations Collating Machine Mit einem angebundenen Rüttler zig/zag / Delivery Jogger with an online zig/zag unit Panel Operation and Controls, Stau / Jamming Doppelbogen- und Fehlbogenkontrolle / double-sheet and no-sheet control Pre-set counter - Full receiving Tray Handnbücher / ManualsElektrischer Anschlusswert / Electrics 230 V - 2 ph Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Pgodpjd Siydsfx Ag Dow Min dimensions of the panels mm 195 x 250 Max dimensions of the panels mm 1200 x 2500 Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 38,732 h, working width: 3,100 mm, travel distance X-axis: 600 mm, back gauge speed R-axis: 200 mm/s, back gauge travel distance R-axis: 250 mm, pressing force: 130 t, TECHNICAL DETAILS Control: MMC ByBend Working area Bending length: 3100 mm Column clearance: 3200 mm Pressing force: 130 t Working height: 1060 mm Thrust: 250 mm Stroke: 400 mm Installation height: 915 mm Axes & travel paths Controlled axes: Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 X-axis travel path: 600 mm X-axis travel speed: 500 mm/s R-axis travel path: 250 mm R-axis travel speed: 200 mm/s Y-retraction: 150 mm/s Y-working speed: max. 1-10 mm/s Y-rapid traverse: 150 mm/s Back stop: 1200 mm MACHINE DETAILS Machine dimensions (LxWxH): 4440 x 2950 x 3100 mm Machine weight: approx. 13,400 kg EQUIPMENT - Tool holder with hydro cushion (top) and 3-point die holder (bottom) with hydraulic tool clamp - Sliding table for flattening operations - BWS-T protective devices as access protection at the rear (Sick safety curtain) & BWS at the front - Bending aid at the rear (0-75°) with brush inserts, H, A, W axes continuously programmable - Pair of stop fingers (complex) - Side stop for dies - Table extension (station) left for supports Pgodov E Iu Uepfx Ag Dew - Additional plates for dies V=60 and larger - Additional foot switch for second operator or station - Articulated arm for control Extensive tool package included in delivery

Condition: reconditioned (used), GENERAL CHARACTERISTICS Maximum Infeed grinding length 150 mm Ø Grinding Wheel Dimensions (OD x ID x width) Ø350 x Ø200 x 150 mm Grinding wheel width 150 mm Peripheral Grinding Wheel speed (m/s) 1.700 RPM Regulating wheel speed nº 4 Min/max Regulating wheel speed (r.p.m.) 21, 30, 42, 310 Pgodpfed I Un Iox Ag Dsw Regulating Wheel Dimensions (OD x ID x width) Ø250 x Ø140 x 150 mm ELECTRICAL CHARACTERISTICS Motor power grinding wheelhead 15 Cv Total Power 16,5 Cv DIMENSIONS AND WEIGHTS High 1.535 mm Long 1.654 mm Weight 1.900 kg Width 1.500 mm

Condition: used, Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs -Length: 510mm Pgjdpotnlz Refx Ag Dow -Width: 310mm -Height: 65mm -Plate thickness: 27 mm -Weight: 37.7 kg

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding process) mm 3100 x 2000 x 100 Max useful working area (edge banding process) mm 3100 x 1925 x 60 (panel thickness) No. 6 movable rails (supports) length mm 1400 LED displaying both the axe X and axe Y position Vacuum cups (with No. 1 vacuum pump, capacity 250 m3/h) Safety side metal grids and front emergency carpets No. 1 Vertical Electro-spindle HSK F63 ( Kw 18) Automatic Tools Changing System, with 18 folds (places) Pgodeq Nmutopfx Ag Dsw No. 14 Independent vertical boring spindles (2 x Kw 1,2) Aggregate Boring Unit, "cross" shape, with 4 horizontal spindles + Circular saw (diam. mm 125) Banding group on board - Glueing Unit (Hot Melt Glue) VT 100 Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate "FLEX 5" Mod. VARIO NC No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit No. 1 Bar Code Reader

Condition: used, wire electrode, welding wire, welding wire Pgedpfx Aoimd Susg Dew -Gas wire electrode: roll started -Type: 310 Ø0.8mm -Number: 2 rolls available -Price: per roll, 1st roll 95,- €, 2nd roll 65,- € -Dimension: Ø 300/100 mm -Weight roll: 9.6 kg / 6.8 kg

Condition: used, wire electrode, welding wire, welding wire -Gas wire electrode: roll started -Type: 310 Ø1.0mm -Dimension: Ø 300/100 mm Pjdsimd S Hjpfx Ag Djgw -Weight reel: 13.2 kg

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping, with air connection for easy movement (air cushion) -Support surface: 1645 x 250 / 695 x 310 mm -Wall thickness: 30/35 mm -Dimensions: 1645/310/H695 mm Psdpfoh Rf I Sox Ag Djgw -Weight: 239kg

Condition: used, Clamping plate, plate field, grooved plate Pgedpfshwgd Rsx Ag Djw -Clamping plate: grooved plate -Length: 310mm -Width: 310mm -Plate height: 65 mm -Weight: 44 kg

Condition: used, Machine vice, vice Pgedob A Sr Hepfx Ag Dew -Jaw width: 250 mm -Back height: approx. 80 mm -Clamping depth: max. 310 mm -Weight: 120 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 25 m/min, edge thickness (max.): 3 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Pedpfx Agjxw T H Ne Djgw Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Router Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spraying unit Machine programming software PowerControl PC22 CE marking

Condition: good (used), Set of 2 Leitz Heliplan Spiral Cutterheads bottom/top 125 x 310 x 40 with pre-drilling, aluminum on Powerlock adapter Pgodpfewzv N Dex Ag Dsw 8000 rpm max Can also be used without Powerlock on a 40 mm spindle

Condition: good (used), functionality: fully functional, Year of construction: 1980, Used Safan guillotine shear Pgodoxzga Ropfx Ag Djw Type VS 310 6 Capacity: 3100 x 6 mm Electric back gauge Manual adjustment of cutting angle and blade gap