Used International 1480 for sale (8,733)

Condition: used, Year of construction: 2016, JBT International 16 Head Rotary Filler With 2 Mettler Toledo C Series /C3/C35 checkweighers Machine had complete refurbishment by original manufacturer 2020 Godpfxezl T Tls Ahmobr "Please note the items in this lot 30466-369 are simultaneously offered in the combination lot 30466-348 as a complete line. The separate parts of the complete line 30466-348 are offered as individual lots 30466-349 to 30466-374 Bidders can bid on the complete line and/or on individual lots. Sales are conditional and subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2+N7 working days."

Condition: good (used), functionality: fully functional, REF: MM6465 Godpfjznux Uex Ahmobr 1 x OK International Group SuperSealer continuous band sealer on mobile height adjustable stand. Manufacturer - OK International Group. Model - SB-40 EU. Serial number - 218-2527-22. Speed - variable, up to 21.3 m/m. Bag material - Heat sealable materials up to 15 mils or 380 microns. Direction - Right to Left. PLEASE NOTE - There are 2 x units available for sale (4,800 EUROS/unit).

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 04.522, total length: 7,820 mm, total width: 2,550 mm, total height: 2,670 mm, 2005 UBH INTERNATIONAL 20FT SWAP BODY tank container 34,570L / 1-component / 4 baffles, 5 lids UN PORTABLE T11 EMKD steam heating bottom discharge 17441 1.4401 valid for 5 years + CSC inspection until 04-2028 = Further information = General information Year of manufacture: July 2005 Model year: 2005 Usable material: Chemicals Weights Empty weight: 4,475 kg Payload: 31,525 kg GVW: 36,000 kg Functional Load compartment volume: 25,000 l Body brand: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of compartments: 1 Condition Technical condition: very good Optical condition: good Gsdozdkyaepfx Ahmebr Further information Please contact Arne Honingh for more information.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Wire-O Binding automatic paper punching machine for A4 & A5 sheets. Maximum Sheet Size 360mm x 330mm Minimum Sheet Size 138mm x 138mm Paper Stocks 50gsm up to 350gsm Gedpfx Aetx Ux Rshmsbr Punching Up to 30,000 – 40,000 sheets per hour Sheet Lift Adjustable from .5mm to 1mm Power Requirements 230v single phase 50 Hz Other styles available: ie Coil Binding - Comb Binding - File Punching - Spiral Binding. (POA)

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine Gbsdpfsw H Naajx Ahmor "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: good (used), Used Thetford International T3 waste compactor. Gjdehvi Ahjpfx Ahmjbr

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Gbodpfx Aeif Ek Rshmer Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes Godefnlkwjpfx Ahmebr • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: used, Year of construction: 2020, GS International 10t Gsdpfoznfdusx Ahmobr Bj 2020 Width Length 12 mtr Hydraulic adjustable Immediately available If you are interested in our loading bridge, we can arrange transport for you.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 16-head rotary filling machine with 2 checkweighers Gbsdpfjzlhy Hex Ahmjr year: 2020

Condition: used, Year of construction: 2013, Overview  This Wirehooder was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale, as the production in the factory was stopped in 2022. The platforms for the operator are included. Technical data  - Capacity: 9,000 bph to 12,000 bph - Formats: Cork caps for cider and champagne glass bottles (75cl) - Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Gbodpjwhk Dvsfx Ahmsr Scope of Delivery  - Wirehooder - Operator platforms

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface Godpfx Aowgc I Rehmsbr • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: new, Year of construction: 2025, functionality: fully functional, New unit MASS International Rotary distributor SR Touchscreen control Motor 400V, 50Hz 360° working range Infinitely adjustable height and tilt Control via freely adjustable times or via potential-free contacts Gsdszkr D Hspfx Ahmsbr Adjustable discharge height 1100 – 1400 mm Adjustable feed height 600 – 900 mm Hopper width 500 mm, tapering to 200 mm Overall width 500 mm

Condition: ready for operation (used), Offered is a single-color pad printing machine by Printing International. Cliché size: 100mm/100mm, max. workpiece size: approx. 130mm/170mm, max. print image diameter: approx. 60mm, max. pad stroke: 100mm, max. output: 1200cycles/h. The machine is pneumatically operated with an open ink well system. Viewing by appointment is possible. Gjdpfx Ahozk Nb Nsmobr

Condition: new, New equipment MASS International Angled conveyor / flow conveyor L - Conveyor belt with a fixed angle of 35° available for short-term delivery MASS International Angled conveyor NC1 Conveyor belt with a fixed angle and collection trays in the infeed section Example as shown: NC 1 Infeed section 600 mm Inclined section 1300 mm Usable width 250 mm External width 305 mm (without motor) Height adjustable, discharge height 750 - 1050 mm Fixed angle between the infeed and inclined sections Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Optional: Other dimensions, see standard delivery list Dimensions according to customer requirements Gbsdpfx Ahjhm Axgjmer FDA-compliant belt Modified belt speed etc.

Condition: new, New machine Gbjdpfx Asu Ti Tvehmer MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: new, New unit MASS International NS3 Speciale Angle conveyor with separator available for short-term delivery Example as shown in the picture: L-shaped conveyor with double roller separator Infeed section 600 mm Inclined section 1300 mm Usable width 450 mm Overall width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the infeed section and in the incline PU belt, black, with studs Stud height 20 mm Stud spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Lateral collection plates in the infeed section Gbsdpod Tidxjfx Ahmer Also available as an option: angle conveyor with Super Grip belt and separator (see the last two photos) Double roller separator with covered belt drive equipped with Super Grip adjustable discharge chute

Condition: new, New device MASS International Angle Conveyor Belt NDS L Conveyor belt/assembly line Available at short notice Gbedjr A D S Eepfx Ahmer Angle conveyor belt with adjustable angles Incl. paddle separator and side catch plates at the feed section Example as shown: Feed section: 600 mm Upright section: 1300 mm Discharge section: 800 mm Usable width: 350 mm Outer width: 405 mm (without motor) Height-adjustable, discharge height 700 - 1000 mm Adjustable angles for feed and discharge sections Adjustable inclination PU belt, super grip Belt speed: 3 m/min Mobile on swivel lockable castors Side catch plates at the feed section Paddle separator is individually controllable and height-adjustable

Condition: new, functionality: fully functional, New equipment MASS International Z series conveyor belt NDZ Angled conveyor / flow conveyor available for short-term delivery Example as shown in the picture: height-adjustable angled conveyor with adjustable angles NDZ 1 Infeed section 600 mm Ascending section 1300 mm Discharge section 500 mm Working width 250 mm Godjiz S Htspfx Ahmebr Overall width 305 mm (without motor) height-adjustable discharge height 700 - 1000 mm adjustable angles for infeed and discharge sections adjustable inclination PU belt Color: black L-shaped cleats Cleat spacing 500 mm Cleat height 30 mm Belt speed 3 m/min Standard control with emergency stop / stop button movable on steerable stop rollers three-part hopper plates for the infeed section The quoted price applies to the NDZ1.

Condition: new, New unit MASS International Conveyor belt NI 1 Flow conveyor/lay-down conveyor Angle-adjustable conveyor belt with a hopper in the infeed section available for short-term delivery Example: NI 1 Length 1500 mm Usable width 250 mm Overall width 305 mm (without motor) Height-adjustable discharge height 600 - 1000 mm Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Godpfx Ajh Nyp Uohmebr Belt speed 3 m/min Movable on steerable swivel casters Optional: other dimensions, see standard delivery list dimensions according to customer specifications FDA-compliant belt modified belt speed etc.

Condition: new, New machine MASS International Model NS1 Angle conveyor / L-shaped conveyor / Conveyor belt Available at short notice Adjustable angle conveyor NS1 with catch plates in the feed section Gbedeuip Iljpfx Ahmer Example as shown: Feed section: 600 mm Rising section: 1300 mm Usable width: 250 mm External width: 305 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angle between feed and rising sections Variable inclination adjustment Cleat height: 30 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on steerable locking castors Three-piece hopper plates for feed section The quoted price refers to the NS1. Other angle conveyors in different sizes available to order—see list, image 2. Custom dimensions available upon request.

Condition: excellent (used), Printing International Cristal 90X2 Godsv Iyh Sepfx Ahmjbr

Year of construction: 2004, condition: good (used), Main Technical Specifications • Web width: max. 330 mm • Max. web speed: 200 m/min • Max. inspection speed: 150 m/min (100% inspection) Gedjylynwjpfx Ahmebr • Unwind roll diameter: max. 700 mm • Rewind roll diameter: max. 500 mm • Core diameter: 76 mm (pneumatic expanding shafts) • Web tension control: 0.5 – 10 kg, steplessly adjustable • Electronic web guiding system (Fife with ultrasonic sensor) Slitting & Finishing • Shear knife slitting unit • 3 top and 3 bottom knives included • Fine adjustment in 0.05 mm increments • Integrated edge trim extraction • Pneumatic splice unit • Integrated label and meter counter Inspection System fleyeVision print inspection system (100% inspection) • Matrix camera (1380 x 1040 pixels) • Flash illumination • Detection of print defects such as missing print, register deviation, spots, missing labels, missing text, matrix waste Inkjet System Imaje S8 Master 2.2G • Two nozzles per printhead • Suitable for marking up to four label lanes • Fully integrated into the central machine control system

Year of construction: 2006, condition: good (used), Configuration • Unwinder • Register Control System • Flexo Unit (Ink / Varnish application) • Laminating / Cold Foil Unit • Die Cutting Unit • GEW UV Dryer • Slitting Unit • Rewinder _____ Machine Description Gjdpfx Aheynkwnjmjbr The ABG Digicon 1 is designed as a modular finishing solution for digital and flexographic label production. The installed flexo unit allows varnish or spot colour application. The laminating / cold foil module enables added-value embellishment. The die-cutting and slitting units ensure precise finishing and roll conversion. The semi-rotary functionality provides cost-efficient short-run flexibility, while full-rotary mode enables higher productivity. _____

Condition: good (used), For sale is a shaft mixer from Stelzer Rührwerke International GmbH. It is the SM460-DF model. Product data: 1455 RPM 400V 18.5 kW Shaft length 720mm Impeller diameter 280mm Gbedpfx Ahjfr Icujmor Further data can be found on the nameplate (photo).