Used Cantilever racks for sale (106)

Condition: excellent (used), Year of construction: 2019, Carrying capacity per cantilever arm: 1,000 kg, Shelf height: 5,500 mm, Axle spacing: 1,000 mm, Shelf length: 2,000 mm, Net weight: 1,200 kg, Equipment: Double-Sided, Cantilever rack H 5500 mm Manufacturer: Vogelsang Type: C 300 Length: approx. 2 meters C93Jdpa Height: 5500 mm Load per arm: 1000 kg Distance between uprights: approx. 1000 mm The cantilever rack consists of: 3 uprights with base made of 300 mm x 100 mm profile, upright height 5500 mm 18 cantilever arms, length 800 mm, load per arm 1000 kg Diagonal braces, screws, connections Total weight: approx. 1200 kg Price: 1700 Euro net / 1 shelf The shelf is located in North Rhine-Westphalia, 51702. Delivery possible for an extra charge.

Condition: used, Year of construction: 2011, Cantilever rack, heavy-duty rack, single-sided cantilever rack, pallet rack -Manufacturer: Bito,Cantilever rack one-sided, base field type KR29 L height 2480 mm -Cantilever arms: 6 levels / shelf height adjustable in 60 mm increments Nkvaovh -Cantilever arm length: 600 mm -Load capacity per cantilever arm, max. 140 kg, see photo type plate -Dimensions: 1130/730/H2480 mm -Total weight: 100 kg

Condition: excellent (used), Cantilever transport trolley Workshop trolley Height 1650 mm width 780 mm Depth 600 mm length of support arms 300 mm D7Rwonc sturdy design

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, We are selling 2 used cantilever racks from Still. Year of construction: 2018 2 pieces cantilever racking system consisting of a total of: 6 uprights IPE 270 on one side 6 base profiles IPE 270 8 lugs welded to base profiles 42 adjustable cantilever arms IPE 120 Dimensions: Shelf height: 5000 mm Shelf depth: 2270 mm + 50 mm deflector Fzjjan8 Center distance: 1000 mm Shelf length: 2000 mm Grid: 100mm possible Load capacity per arm: 700kg with evenly distributed load Load capacity per upright: 4,200kg per side with evenly distributed load The rack must be dismantled and loaded by the purchaser. A forklift can be provided for this purpose. The rack is sold under exclusion of any warranty.

Condition: good (used), 110 CM X 90 CM X 90 CM Plate Used in tos machine Utym8279Qx

Condition: used, Throat/ depth: 1.200 mm Height: 5.100 mm Total length: 39.000 mm Number of daylights: 5 Uymprc7Bgx Number of supports: 27 Distance between supports: 1.500 mm Cantilever shelf: Yes Double-sided: Yes Space requirement Length: 39 m Space requirement Width: 2,6 m Space requirement Height: 5,1 m

Condition: good (used), Year of construction: 2017, Carrying capacity per cantilever arm: 1,000 kg, Shelf height: 4,500 mm, Axle spacing: 1,000 mm, Shelf length: 19,000 mm, Net weight: 8,000 kg, Equipment: Double-Sided, Double-sided cantilever rack H 4500 mm with galvanized grating Manufacturer: Vogelsang Type: C 300 Length: approx. 19 meters Height: 4500 mm Load per arm: 1000 kg Distance between uprights: 1000 mm The cantilever rack consists of: 19 uprights with double base made of 300 mm x 100 mm profile, upright height 4500 mm 76 cantilever arms, length 1250 mm, load per arm 1000 kg 108 galvanized gratings, L/W/H: 1250 mm x 1000 mm x 30 mm Diagonal braces, screws, connections Total weight: approx. 8000 kg It is possible to convert it on one side. Price: 6500 Euro net / 1 shelf Available: 2 shelves U0Twpl9Otn The shelf is located in North Rhine-Westphalia, 51702. Delivery possible for an extra charge.

Condition: new, Year of construction: 2023, Carrying capacity per cantilever arm: 500 kg, Shelf height: 3,200 mm, Total length: 2,100 mm, Axle spacing: 1,000 mm, Total height: 3,200 mm, Load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 shelf uprights height 3.2 m with base section 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard with a depth of approx. 2.1 m) Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) Net price: € 2,490.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Shelf height 3,200 mm - Load capacity per upright 2,500 kg - Foot section and cantilever arms with 1,800 mm usable depth - (For 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 screw-on cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal bracing for 1,000 mm spacing - Shelf length = 2,100 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can be made in approx. 1 week after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Bigu3X3Fmku According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: used, This cantilever rack with inserts is being auctioned online in our industrial auction / machinery auction LIPPERT NACHAUKTION ESCHENBACH - Industriebedarf - Betriebs- und Geschäftsausstattung. Uxxuwuc3G9 You can find these and many other items on our platform.

Condition: good (used), Year of construction: 2000, Workshop press with approx. 500 mm long stroke, piston rod 50 mm diameter total height 270 cm D7V2Vs8 max. pressure I do not know Hydraulics not included

Condition: used, Four wins - The building blocks of success from DLK - Lagertechnik | Levelmaker® | Logistik | Lösungen WE OFFER Cantilever racking Cantilever racking bays Heavy-duty racking full-surface grating shelves Examples: No. 1 Net price: € 20,000.00 Width: 23,750 mm Height: 5,100 mm Depth: 1,250 mm Axial dimension: 1,250 mm Levels: 5 Number of uprights: 20 Number of rows: 1 No. 2/3 Net price: 41.400,00 € Width: 30,140 mm Height: 5,100 mm Depth: 1,250 mm Axle dimension: 1,370 mm Levels: 6 Number of uprights: 23 Number of rows: Double row No. 3 Net price: 25.000,00 € Width: 30,000 mm Height: 6,200 mm Depth: 1,250 mm Ccnlyuor Axial dimension: 1,250 mm Levels: 6 Number of uprights: 25 Number of rows: 1 This is a used item. PROJECTION Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to help you with the transportation and assembly of your goods. TERMS OF PAYMENT Terms of payment must be agreed in the event of an order. The price is understood to be the unit price/net price or as stated in the description text (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US The company DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveyor technology, warehouse platforms, textile warehouses and machines for trade, industry and crafts. We constantly offer you interesting second-hand offers from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us.

Condition: new, Cantilever rack, new H: 400cm, base +3 storage levels with roof & rear panel Uappxbiaav Free delivery within Germany, except islands Data : - H : approx. 400 cm - D : approx. 147 cm - L : approx. 1420 cm - Cantilever arms : approx. 125 cm - Axial dimension: 290 cm (can be adapted to customer requirements) - New goods - made in Germany. - Delivery time approx. 6 weeks after commercial clarification. - 1000 kg load per arm - 4000 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 200 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 06 x uprights, incl. base approx. 400 cm made of IPE270. - 18 x cantilever arms approx. 125 cm made of IPE 120. - 06 x roof girder approx. 150 cm made of IPE 120, 5° rising roof pitch. - incl. roof and rear wall material. - incl. all necessary connecting elements and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 12.250,00 € net plus statutory value added tax. You will receive an invoice with VAT shown. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your operating equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 rack uprights height 4,160 mm with foot section 1,200 m effective depth 12 cantilever arms with 1,200 mm effective depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4.160 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. 8Med3Imfm7 The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: new, Double-sided cantilever rack New Data : - H : approx. 400 cm Iswbzyq - W : approx. 256 cm - L : approx. 18.45 m - Cantilever arms : approx. 120 cm - Axial dimension : approx. 131 cm - New ex works - Double-sided - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 200 mm increments. - Levels: Base + 4 storage levels (5 storage levels) - Delivery time approx. 4 weeks Shelf consists of : - 015 x uprights, double-sided, incl. base approx. 400cm made of IPE160. - 120 x cantilever arms approx. 120 cm made of IPE 80, without deflector - incl. all necessary connecting elements and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 12450,00 € net plus statutory value added tax. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: like new (used), Year of construction: 2022, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) E2Jkque - Surface painted in RAL 5010 (gentian blue) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and suitable for dowels and must be able to support the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals required are met. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2022, Cantilever rack double sided used: Hot galvanized screw system Scope of delivery: 4 shelf uprights double sided height 3.500 mm with foot parts each 1.200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fixing material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2.250 kg - Load capacity per cantilever 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms and 2 foot sections with depth 1,200 mm per upright, standard = 4 storage levels on top of each other per upright side 8Shgoiauds - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length 4.000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.500 mm with foot part 1.200 mm effective depth 12 cantilever arms with 1.200 mm effective depth, standard Including longitudinal and diagonal bracing for 1,300 mm spacing Fastening material (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.500 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) Icqpoj3Rz - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.000 mm with foot part 1.200 mm 12 cantilever arms with 1.200 mm useful depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.000 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time Bhdwvxp7Zg - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.500 mm with foot part 1.200 mm 12 cantilever arms with 1.200 mm useful depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.500 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Ibkj8N9 Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 4,160 mm with foot section 1,200 mm effective depth 12 cantilever arms with 1,200 mm effective depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4.160 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level. Bfvqg039Uj

Condition: like new (used), Year of construction: 2022, Cantilever rack double sided used: Hot galvanized screw system Zirmu3Xa Scope of delivery: 4 shelf uprights double sided height 4.160 mm with foot part 1.200 mm 24 cantilever arms with 1.200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2.250 kg - Load capacity per cantilever 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms and 2 foot sections with depth 1,200 mm per upright, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length 4.000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 2.600 mm with foot part 1.000 mm effective depth 12 cantilever arms with 1,000 mm effective depth, standard Including longitudinal and diagonal bracing for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 2.600 mm - Load capacity per upright 1.800 kg - Base and cantilever arms with 1.000 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone E2Jjtua - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.000 mm with foot part 1.200 mm effective depth B8Vvxohvd0 12 cantilever arms with 1,200 mm effective depth, standard Including longitudinal and diagonal bracing for 1,300 mm spacing Fastening material (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.000 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: as good as new (ex-display), Year of construction: 2018, Carrying capacity per cantilever arm: 720 kg, Shelf height: 3,500 mm, Total length: 4,000 mm, Axle spacing: 1,300 mm, Total height: 3,500 mm, Clearance between the columns: 1,300 mm, Load capacity per stand: 2,250 kg, Equipment: Double-Sided, Double-sided cantilever rack in hot-dip galvanized design: Scope of delivery: 4 double-sided shelving uprights, height 3.5 m, foot section per upright side 1.2 m usable depth and tire protection 24 cantilever arms with angle deflector and 1.2 m usable depth (suspension system) Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) Net price: € 2,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Shelf height 3,500 mm - Shelf length 4,000 mm - Load capacity per upright side 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Dm2Prn - 3 cantilever arms per upright side with angle deflector (suspension system) (= 4 storage levels per upright side) - Load capacity per cantilever arm 720 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can be made in approx. 1 week after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 2.600 mm with foot part 1.000 mm 12 cantilever arms with 1,000 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Bfr8Aplf7D - Surface hot-dip galvanized - Shelf height 2.600 mm - Load capacity per upright 1.800 kg - Base and cantilever arms with 1.000 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.