Used International S 1700 for sale (71,839)

Year of construction: 2020, condition: ready for operation (used), A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Bdsdpfx Aey E S E Ajltsd

Year of construction: 2021, condition: ready for operation (used), A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Bdsdpfsy E S E Nox Alted

Condition: excellent (used), Year of construction: 2001, color: other, loading space volume: 25 m³, UBH INTERNATIONAL 20FT ISO Tank Container 22,500L / 3 compartments Compartment 1: 7,500L Bdsdsyznbxjpfx Altjd Compartment 2: 7,500L Compartment 3: 7,500L IMO1 T7 22T6 Bottom discharge Steam heating 2.5Y- + CSC test valid until 09-2028 = Further information = General information Year of manufacture: July 2001 Model year: 2001 Dimensions Dimensions (L x W x H): 606 x 244 x 259 cm Weights Unladen weight: 4,550 kg Payload: 29,450 kg GVW: 34,000 kg Functional Body brand: Van Hool 24.720L TC, 2 compartments (11,950L/12,770L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for further information.

Condition: new, New unit MASS International NS3 Speciale Angle conveyor with separator available for short-term delivery Example as shown in the picture: L-shaped conveyor with double roller separator Infeed section 600 mm Inclined section 1300 mm Usable width 450 mm Overall width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the infeed section and in the incline PU belt, black, with studs Stud height 20 mm Stud spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Lateral collection plates in the infeed section Bedpfsd Tidxex Altsdd Also available as an option: angle conveyor with Super Grip belt and separator (see the last two photos) Double roller separator with covered belt drive equipped with Super Grip adjustable discharge chute

Condition: new, New device MASS International Angle Conveyor Belt NDS L Conveyor belt/assembly line Bdodpfx Aler A D S Ejtod Available at short notice Angle conveyor belt with adjustable angles Incl. paddle separator and side catch plates at the feed section Example as shown: Feed section: 600 mm Upright section: 1300 mm Discharge section: 800 mm Usable width: 350 mm Outer width: 405 mm (without motor) Height-adjustable, discharge height 700 - 1000 mm Adjustable angles for feed and discharge sections Adjustable inclination PU belt, super grip Belt speed: 3 m/min Mobile on swivel lockable castors Side catch plates at the feed section Paddle separator is individually controllable and height-adjustable

Condition: new, New machine MASS International Model NS1 Angle conveyor / L-shaped conveyor / Conveyor belt Bdjdeuip Ilspfx Altod Available at short notice Adjustable angle conveyor NS1 with catch plates in the feed section Example as shown: Feed section: 600 mm Rising section: 1300 mm Usable width: 250 mm External width: 305 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angle between feed and rising sections Variable inclination adjustment Cleat height: 30 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on steerable locking castors Three-piece hopper plates for feed section The quoted price refers to the NS1. Other angle conveyors in different sizes available to order—see list, image 2. Custom dimensions available upon request.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 04.522, total length: 7,820 mm, total width: 2,550 mm, total height: 2,670 mm, 2005 UBH INTERNATIONAL 20FT SWAP BODY tank container 34,570L / 1-component / 4 baffles, 5 lids UN PORTABLE T11 EMKD steam heating bottom discharge 17441 1.4401 valid for 5 years + CSC inspection until 04-2028 = Further information = General information Year of manufacture: July 2005 Model year: 2005 Usable material: Chemicals Weights Empty weight: 4,475 kg Payload: 31,525 kg GVW: 36,000 kg Functional Load compartment volume: 25,000 l Body brand: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of compartments: 1 Condition Technical condition: very good Optical condition: good Further information Please contact Arne Honingh for more information. Bedpszdkyasfx Altedd

Year of construction: 2004, condition: good (used), Main Technical Specifications • Web width: max. 330 mm • Max. web speed: 200 m/min • Max. inspection speed: 150 m/min (100% inspection) • Unwind roll diameter: max. 700 mm • Rewind roll diameter: max. 500 mm • Core diameter: 76 mm (pneumatic expanding shafts) • Web tension control: 0.5 – 10 kg, steplessly adjustable • Electronic web guiding system (Fife with ultrasonic sensor) Slitting & Finishing • Shear knife slitting unit • 3 top and 3 bottom knives included • Fine adjustment in 0.05 mm increments • Integrated edge trim extraction • Pneumatic splice unit • Integrated label and meter counter Inspection System fleyeVision print inspection system (100% inspection) • Matrix camera (1380 x 1040 pixels) • Flash illumination • Detection of print defects such as missing print, register deviation, spots, missing labels, missing text, matrix waste Inkjet System Imaje S8 Master 2.2G Bdsdpfx Aljylynwotjd • Two nozzles per printhead • Suitable for marking up to four label lanes • Fully integrated into the central machine control system

Condition: new, Year of construction: 2026, functionality: fully functional,

Condition: new, Year of construction: 2026, Angled conveyor belt available in various lengths and widths, as well as different speeds. - Can be moved on steerable stop rollers. Bdedslkdbyspfx Altjd - Angle is adjustable. - Cleat height: 30 mm. - Spring-assisted height adjustment.

Condition: new, Year of construction: 2026, functionality: fully functional, The NPS belt conveyor is for sale. It can be ordered in various lengths and usable widths. Bjdpolkda Hjfx Altjdd - High-quality aluminum profile, anodized, with grooves - Without guide plates - Smooth PU conveyor belt, temperature-resistant from -10°C to +90°C - Mobile substructure, adjustable from 900 - 1300 mm - Worm gear motor, 3 x 400 V, 50 Hz - Constant belt speed of approximately 6.0 m/min - Motor protection switch with 5 m cable & CEE plug

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Prodim proliner 8XCS scanner. Includes software. Small tripod. Leaps. Backpack. IPT and hook pen and remote. Extras included - Heavy duty plastic carrying case. Extra remote. Measuring support bars. Bdedpfxjyl Spae Altsd

Condition: used, GS international Bdodpfx Aleyxv E Hjted Capacity 12 tons Year of construction 2010 Immediately available Loading bridge needed on site? We can transport the loading bridge for you

Condition: new, Year of construction: 2022, *WAREHOUSE CLEARANCE* *DISCOUNT OFFER* The conveyor belt is from 2022, new and unused. We offer a 1-year warranty. New price from model year 2023: €1,870 Bdsdpfx Alehy Edvetjd L: 2000 mm W: 150 mm Mobile Belt speed: 3 m/min, but can also be adjusted Height adjustable: 840 mm - 1240 mm Additional information: Available with or without guide rails/side walls (height: 60 mm)

Condition: ready for operation (used), Year of construction: 2018, conveyor belt length: 3,100 mm, conveyor belt width: 445 mm, Belt dimensions: 3100 × 445 mm Belt speed: 3.6 m/min Bodey Nk D Ejpfx Altjdd

Condition: good (used), For sale is a shaft mixer from Stelzer Rührwerke International GmbH. It is the SM460-DF model. Bdodpfxsfr Icuj Altsd Product data: 1455 RPM 400V 18.5 kW Shaft length 720mm Impeller diameter 280mm Further data can be found on the nameplate (photo).

Condition: new, Year of construction: 2025, functionality: fully functional, The Z-conveyor belt is for sale with the following technical data: Z-belt conveyor Type NDZ - Specifications. Feeding height: 500 mm Incline belt length: 1800 mm Bdedpew Nrm Hofx Altsd Discharge height: 500 mm Useful width: 600 mm, overall width: 750 mm Cleat height: 30 mm Discharge height: max. 1600 mm, min. 1150 mm Belt speed (constant): approx. 6 m/min Aluminum side guides, 60 mm high Mobile base frame with braked castors Reinforced conveyor belt, temperature resistant from -10°C to +90°C

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, The angle conveyor from MASS is for sale: Type NC - SPEC 500/1800 x 600 Infeed section: 500 mm Incline section: 1800 mm Bsdpew Nrpbsfx Altodd Usable width: 600 mm, total width: 750 mm Conveyor speed (constant): 6 m/min Mobile base frame with brake rollers Discharge height: max. 1500 mm, min. 1100 mm Side guide: 60 mm PU belt with 30 mm cleat height, temperature resistant from -10°C to +90°C Motor protection switch with 5 m cable & CEE plug

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, HORIZON SPF-200A Booklet Making Line | VAC-100 + FC-200A + ST-40 Description: For sale: complete Horizon booklet making line consisting of collating, stitching, folding, trimming and stacking modules. Reliable Japanese production system, ideal for commercial print shops. The machine is fully operational and currently installed in production environment. ---- Configuration includes: Air-suction collator: VAC-100a + VAC-100m Stitching & folding unit: SPF-200A Fore-edge trimmer: FC-200A Stacker delivery: ST-40 ---- Technical specifications: 1. Collator (VAC-100a / VAC-100m): Voltage: 230 V Frequency: 50 Hz Current: 10.4 A (each tower) Feeding system: air suction Configuration: 2 towers x 10 bins 2. Stitcher & Folder (SPF-200A): Voltage: 230 V Frequency: 50/60 Hz Current: 3.4 / 3.2 A Functions: saddle stitching (2 heads) folding booklet production 3. Trimmer (FC-200A): Automatic fore-edge trimming Inline operation with SPF-200A High trimming precision 4. Stacker (ST-40): Voltage: 230 V Frequency: 50 Hz Current: 4.7 A Automatic sheet stacking ---- Condition: Good working condition Complete production line Currently in use Total counter: approx. 1.8 million booklets ---- Advantages: ✔ Complete booklet production system ✔ Renowned brand: Horizon ✔ Inline workflow ✔ High productivity ✔ Reliable and easy to operate ---- Bjdpfxjy Axdaj Altsdd Additional information: Machine can be inspected in operation Test production possible Assistance with installation available Availability: to be agreed

Condition: new, Year of construction: 2026, Brand new system from one of the world's largest manufacturers, Dardi International / Flying Bridge design, 4x2 m cutting area, 2-D, linear guides with ball screws on all three axes, Yaskawa motors with controllers. Delivery time approx. 6-8 weeks, directly available in our showroom in Elsenfeld with the following configuration: Many machines of the same type can be inspected in advance in Benelux, Switzerland, Germany, etc. Please contact us. -- Other sizes available on request ---- Machine - 2x4m cutting area with stainless steel tank and wave-shaped steel supports, individually replaceable - ESA PC control WIN 11 - IGEMS 2-D CAD/CAM programming system incl. automatic nesting to minimize material waste - 1 cutting head, 2-D version - Handwheel - High-pressure supply via rotating joint - Automatic central lubrication - High-pressure supply via base profile and shut-off valve - Allfi® abrasive feed system 1.3 tons, fully automatic - Allfi® abrasive dosing system 2.0, pneumatic-free and continuously adjustable - KEYENCE light barriers for CE compliance - IGEMS and operator training as well as on-site installation available at extra cost Price ex works Elsenfeld. We are the European distributor for Dardi International with 27 years of experience in high-pressure waterjet systems. At extra cost: - BFT Ecotron 40.37+ high pressure pump - Aqualon High Pressure Pump AQRO S50c 37 KW / 3.8 l/min Optional manual swivel head available at extra cost – see pictures. Bodpex Ig Siefx Altedd

Condition: new, New equipment MASS International NPS accumulation conveyor Conveyor belt / accumulation belt available for short-term delivery Accumulation surface without side walls Height-adjustable, mobile on steerable swivel casters Example: NPS 1 Length 1500 mm Usable width 250 mm External width 250 mm (without motor) Accumulation surface without side walls, therefore full usable width Height-adjustable discharge height 200 - 400 mm PU belt, smooth, black Belt speed 3 m/min Conveyor belt mobile on steerable swivel casters The quoted price refers to the NPS1. Optional: Dimensions according to any customer request Belt approved for food (FDA compliant) Bodpfx Aloizi S Djtodd Modified belt speed Frequency inverter for stepless adjustment of the belt speed etc.

Condition: used, Year of construction: 2005, functionality: fully functional, For sale is a complete shrink sleeve system consisting of an Etisleeve sleeve applicator and a multi-zone steam shrink tunnel Powersteam, both from the renowned manufacturer Sleever International. The system was in productive use until recently and efficiently processes shrink sleeves with high precision onto cylindrical containers. Machine Configuration: Sleeve Applicator Manufacturer: Sleever International Model: Etisleeve Type: 75 SL 2V 80 Year of manufacture: 2005 CE-compliant Steam Shrink Tunnel Manufacturer: Sleever International Model: Powersteam Type: MSA 250 Year of manufacture: 2005 Bodpfxjx Tg Ube Altjdd Control & Operation – Integrated HMI control panel – Digital input of sleeve length – Performance display (products/min) – Cycle and process control – Safety monitoring (housing supervision, reset function) – Production and daily counters Technical Features: – Precise vertical sleeve application – Automatic sleeve film unwind – Centering station for precise positioning – Multi-zone steam shrink tunnel with stainless steel interior – Continuous stainless steel conveyor belt – Auger feed with interchangeable augers – Height- and format-adjustable guide rails – Full safety glazing with interlock system – Industrial-grade drives and robust mechanical components Formats & Performance: – Proven operation with 100 ml containers – Documented sleeve lengths (e.g., 155 mm) – Additional formats possible depending on configuration – Output depending on product approx. 40–80 containers/minute Condition: – Used – Complete and fully functional system Scope of Delivery: – Etisleeve sleeve applicator – Powersteam steam shrink tunnel – Integrated conveyor technology – Feed screws and visible format parts – Existing adjustment and format documentation The system is currently still fully assembled and available for inspection under production conditions. A live demonstration with product and sleeve film under power is possible by prior appointment. Location: – Berlin – Inspection possible Price: – On request

Condition: excellent (used), Printing International Cristal 90X2 Bedpfsv Iyh Ssx Altsdd

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23A0017, turning diameter over cross slide: 520 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 500 mm, travel distance Z-axis: 500 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 18 m/min, total height: 1,890 mm, total width: 1,620 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, CNC Lathe, with 45° inclined bed - COGENTECH Bedpfxovwbvpj Altodd > Siemens 808D control > Siemens motors > Linear guides > 6'' hydraulic universal with 3 jaws > 6-station electric turret

Year of construction: 1980, condition: used, Straightening and welding table Fabr.PÜSCHEL Year 2010 . Bjdpfeq Ru Hxjx Altjdd Table dimensions Length: 1700 mm X Width: 1700 mm Height 760 mm. Table top thickness 30 mm with adjustment screws in good condition.