Used Injector for sale (160)

Condition: used, mileage: 310,000 km, power: 294 kW (399.73 HP), gearing type: automatic, fuel type: diesel, overall weight: 26,000 kg, tire size: -, axle configuration: 6x2, first registration: 06/2015, emission class: euro6, suspension: air, Year of construction: 2015, Equipment: air conditioning, ref: 9535874 MAN TGS 6X2 400CV AUTOMATIC GEARBOX POLYBENNE AMPIROLL VEHICLE FULLY SERVICED WITH MINES VALIDITY 10/2025 AUTOMATIC AIR CONDITIONING REAR AIR SUSPENSION MG COUPLING 2 BEACON HYDRAULIC BAE MARREL ARM SLIDING JIB WITH FRONT ARM LOCKING IDEAL FOR CRANE ON CRADLE 10000? ht of work carried out on this vehicle. Preparation vo for passage to the Mines. Loading, Passage to the brake bench and play plate. Check 4-way valve and independence of the tanks. Check absence of play on the running gear and steering. Check condition of the brakes and adjustment. Vehicle set up, chassis wedged, removal of second axle suspension cushions and replacement reassembly. Chassis air leak repair. Hydraulic leak repair, pump removal, reconditioning reassembly. Replacement of stem axle. Catalyst removal to replace protective sheet metal, reassembly of the assembly. Removal and replacement of wishbone arm. Door panel removal, left handle replacement, reassembly of the assembly. Testing with a case to analyse engine faults, diesel fuel injector return check. Supercharging circuit leak check, sensor removal, replacement, reassembly, road test OK. Lighting and signalling check and repair, bringing into conformity. Engine, gearbox, axle oil change, diesel fuel, cabin air filters, dryer. Level check. Windscreen removal, gluing and refitting. Axle 1 ball joints and steering rod. New axle 3 suspension cushions. Presentation to the mines. Air conditioning Casdponwir Refx Abbsa Sunroof Lifting axle Power take-off Power: 400CV DIN Brand arm: MARREL Power: 294kW

Condition: used, Year of construction: 2008, power: 226 kW (307.27 HP), gearing type: other, fuel type: diesel, first registration: 01/2008, mileage: 133,000 km, driver cabin: other, emission class: euro4, Vehicle location: Bovenden, environmental badge green approx. 133,000 km run, Torque Reduction: TR40, Prop. Version: 21042761, Max. Torque: 1.530 Nm, Rated Power: 226 KW, Rated Power Speed: 1.900 rpm, Displace Ment. 9,4 liter, Lowible 590-710 rpm, Injector Type: E3-1, Exhaust Brake. VEB ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Caedpfx Absvhhnaobsa - .

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Panels (workpieces) feeding by No. 3 motorized belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 50 Motorized carpet to evacuate chips and wastes Total installed power (Kw) 60 WORKING GROUPS (BOTTOM) Drilling heads with vertical spindles: No. 6 Indipendent vertical drilling spindles: No. 40 x 6 heads (tot. No. 240 spindles) Drilling head motor power: No. 6 x Kw 2,7 WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles: No. 4 (4 x Kw 2,7) Horizontal drilling spindles - Right side: No. 13 x 2 heads (tot. No. 26 spindles) Horizontal drilling spindles - Left side: No. 13 x 2 heads (tot. No. 26 spindles) Cajdpfx Abedg Itnebsa Inserting nozzle and glue injectors (Right side): No. 8 (high-pressure) Inserting nozzle and glue injectors (Left side): No, 8 (high-pressure) Storage tanks for automatic feeding of the dowels: No. 2

Condition: excellent (used), functionality: fully functional, RUHLE IR-56 ID.NO. 2638 Codpfxsq T Rzve Abboaa Ruhle IR-56 injector + Tenderizer very nice condition compact little machine. Dimensions 133 x 80 cm H 200 cm.

Condition: used, mileage: 669,852 km, first registration: 05/2010, fuel type: diesel, color: blue, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, parking heater, tail-lift, * Our internal number: 1058 * MAN TGS 26.440 * FIRST HAND * All repairs were carried out in an external workshop, including customer service - invoices are available. Casdpfx Abjvdhurobsa * New front axle brakes including discs at 653,745 km * New batteries at 622,854 km * New rear axle brakes at 610,516 km * New combination cylinder at 610,516 km * Valve cover gasket replaced,... * AdBlue injector replaced,... * Service,... * Invoices for EUR 21,200 are available * Trailer hitch * BÄR tail lift * 669,852 km - Original * etc. * All information without guarantee * We reserve the right to sell the vehicle prior to purchase * Please refer to our terms and conditions

Condition: used, mileage: 680,000 km, power: 375 kW (509.86 HP), first registration: 05/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: air conditioning, * Mercedes-Benz 2651 Actros MP2 V8 Tractor Unit * First registration: 2008 * 680,000 km * Euro 5 * Telligent manual transmission with clutch * Tipping hydraulics * Leaf/air suspension * 6x4 axle configuration * Air conditioning * Retarder * Mega cab * Wheelbase: 3.30 m * Unladen weight: 9,575 kg * All injectors replaced! * Engine runs unevenly and smokes * Camshaft likely damaged Casdpfxsw Ikp Dj Abbsa Special equipment: Work lights on rear cab wall (top), audio system: Radio Truckline CC 65 / 70 with cassette deck, 220 Ah battery, comfort cockpit, air horn, movable cab entrance, rear axle H 7, 13 t, crown wheel 300, reinforced clutch, mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, auxiliary drive MB 2C, Voith retarder, low-maintenance fifth wheel, Fischer fifth wheel coupling, circuit breaker, seats in cab: driver's comfort suspension seat incl. horizontal suspension, sun visor, 24V socket in cab, straight front axle, transmission oil cooler Additional equipment: Emission standard EURO 5, axle configuration: 6x4, trailer socket 24V / 15-pin, work lights, electrically adjustable and heated exterior mirrors, wide-angle exterior mirror heated (left), outside temperature display, rear axle differential lock, cab: L (long), suspension: leaf / air, electric window lifters, 80 A alternator, 16-speed transmission, interior filter: pollen filter, body/chassis: tractor unit, fuel tank: 400 litres, engine: 16.0 litre 375 kW V8 diesel (OM 502 LA), engine brake with constant throttle, wheelbase 3300 mm, fifth wheel coupling: mounting height 150 mm, disc brakes, steel rims 9.00x22.5, cab control, Telligent shifting, Telligent brake system with ABS+ASR, front underrun protection, CB radio pre-installation, telephone/fax pre-installation, immobilizer, central locking incl. key, permissible total weight 26.0 t

Year of construction: 2004, condition: good (used), functionality: limited functionality, Color blue hammer finish Operating voltage: 3 x 400 V + N + PE / 50/60 Hz Version with hinged tilting hood, for easy loading of the system with a crane or forklift truck. - Tilting hood, automatically opens pneumatically up to an angle of 90°, with integrated viewing window, equipped with safety and wear glass, in a quick-change frame. Operation via push button (two-hand control) on the switch and control cabinet. For easy crane or forklift truck loading. - Dirt collection drawer with sieve in the funnel, for collecting coarse, blasted contaminants. - Work platform, hinged, 1 bar, height 220 mm. - Blasting gun unit, type EF 4, with hard metal blasting nozzle HSD 8/15 for large-area blasting work, adjustable using a pressure reducing valve, 0 - 8.5 bar, blasting pressure can be read on the pressure gauge. - Blasting gun and blow-out gun wall holder, permanently mounted between the arm openings on the tilting hood. - Blasting agent pre-acceleration with feed injector unit, adjustable using a pressure reducing valve, 0 to 4 bar, feed pressure can be read on the pressure gauge. - Automatic, selective fine grain separation unit, type SHOT SEPARATOR. - Blow-out gun, for practically dust-free removal of the processed parts. - Separately arranged switch and control cabinet, swiveling, with separately arranged electrical, electronic and pneumatic control units as well as all operating and control elements. - Main switch, on / off. - Key switch, on/off, with 2 keys. - Operating hour counter. Caedpfx Abevpvn Rsbea - Separately installed high-surface microfilter unit, type IMF-2, with automatic, electro-pneumatic filter cleaning. Fan electronically infinitely adjustable. Including integrated dust collection bucket, mobile. - Drain basin for blasting media. - Blasting media scoop, for easy filling of the blasting media into the microblasting system. - Side loading doors. - Turntable unit made of aluminum Ø 1,000 mm, for piece weights up to maximum 300 kg, manually rotatable. - Blasting media drying system, 50 W.

Condition: used, Year of construction: 2015, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 10-00960, Reason of selling: change of business. Perfect conditions. This machine is characterized by: • 24 stations pneumatic • 2 PU injectors • 3 Poli and 2 Iso tanks • Colour carts • ABB Roughing and steel plates robot + ABB Release agent robot • Insert activating unit • Periodically maintained by manufacturer and highly specialized technicians For more info do not hesitate to contact us per email. It is possible to see the machine on site Please note that under no circumstances shall any fee, commission, or other form of remuneration be payable to third parties acting as intermediaries in the sale. Cjdswv Nmfepfx Abboaa

Condition: excellent (used), Double-side working machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting Electronic Programmer RT 486 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Cajdpfx Aodi R R Rsbbea Dowels inserting nozzles (and Glue Injectors) No. 6 Left-side + No. 6 Right-side Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) Bottom vertical units/supports (N°) 4 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Total installed power (Kw) 11,5

Condition: like new (used), Year of construction: 2014, functionality: fully functional, GAROS GSI 620 CWP ID.NO. 2880 Garos mod GSI 620 CWP Saltinjector with built-in tenderizer & associated purification plant. Year mod 2014, 4 mm needles width bridge 63 cm. Dimensions 300 x 220 cm Height 225 cm. Codpfxovpvlps Abbjaa

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Caedpfxotw S Awe Abbja Equipment: - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.

Condition: like new (used), Automatic injector 123 needles Loading width: 420 mm Max. product height: 200 mm Needles quantity: 123 - 3 mm Transportation type: walking beam Pressure range: 0,5 - 4,5 bar El. 230/400 V, 50/60 Hz Connection value: 11, 0 kW 50/60 Hz Machine dimensions, mm: Length: approx. 2 200 mm Width: approx. 1 100 mm Height : approx. 2 350 mm Csdpfjumk Txex Abbeaa

Condition: used, functionality: fully functional, Thermo Electron Trace GC Ultra.Software +2000 euros. TRACE GC Ultra Gas Chromatograph is designed to be easily configured with up to two injectors and three detectors. The Thermo Scientific TRACE GC Ultra multi-channel gas chromatograph was developed for the evolving requirements of modern laboratories. With the most complete range of proprietary inlets, sensitive detection systems, smart accessories, and ancillary devices, the Ultra platform features unique technologies that raise the standards of speed, sensitivity and separation in gas chromatography. Features: Simple, rugged hardware. Internal LAN interfacing capability. Independently heated valve housing able to accommodate up to 4 heated/2 unheated gas valves, 8 pressure regulators, 8 needle valves, In/out ports, packed and capillary columns. Range of Large Volume techniques overcomes sensitivity boundaries of conventional GC. Linear heating rate up to 1200°C/min. reduces sample run times for crude oils, pesticides and hydrocarbons determination as well as food and flavor characterizations. High temperature programming up to 20°C/s and fast cooling times of approximately one minute. Precise retention time control. Large Volume split/splitless technique using standard splitless injector extends sample injection volume of conventional GC methods without additional investment, training or revalidation of methods. Supports range of injectors, including BEST PTV, cold on-column inlets and detector soltuions for conventional GC and GC/MS. Provides in-series, staked or parallel configurations of up to three detectors featuring different selectivity. Good working condition. Please check out our other listings as well. Caedpot U Su Tjfx Abbsa

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h Casdpfx Abjfz U Nueboa • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) Cjdpsd Nviqsfx Abboaa - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box Codjfz U Rcepfx Abbeaa • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Condition: excellent (used), CNC-Gantry Flexible Automatic through-feed Boring Machine with Dowels inserting system Movable panel (horizontal position of workpiece/panel), movable working head Numerical Control Power Control, Software WoodWOP Overall integral safety cabin (enclosure) of the machine Panels (workpieces) feeding by motorized belts 3 Feeding speed (m/min) 1 - 90 (ca.) Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1400 x 60 Maximum stroke of the axis (X - Y - Z) mm 3580 x 1838 x 125 Two panels simultaneously processables (in Y axe) mm 600 + mm 600 Total installed power (Kw) 38 WORKING GROUPS (TOP): Cajdpfod Nvi Dsx Abbja Drilling heads with vertical spindles (No.) 1 Independent vertical boring spindles (No.) 38 + 3 special Independent horizontal boring spindles (No.) 6 Circular Grooving Saw (on X axis) dia. (mm) 100 Vertical electro-spindle (No.) 1 x SK 30 (Vertical electro-spindle motor power (Kw 6) Automatic Tools Changing System, Tools storage plate (No. 3 folds- positions) WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles (No.) 2 Horizontal drilling spindles - Right side (No.) 13 + Left side (No.) 13 Inserting nozzle and glue injectors (Right side) No. 2 + (Left side) No. 2 Storage tanks for automatic feeding of the dowels (No.) 1

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box Cjdpfx Abefz Dknebjaa • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) Csdpegwbbqofx Abbeaa N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h Cajdjfz U Rrjpfx Abbja • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Condition: excellent (used), Electronic Programmer NC 400 Software Biesse Through-feed motorized conveyoring belts (No.) 2 Caodpfjd Nuwisx Abboa Horizontal units/supports (No.) 2 Dowels inserting nozzles (and Glue Injectors) N. 5+5 Max. working width (mm) 3200 Min. working width (mm) 235 Bottom vertical units/supports (N°) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Motorized endless screws to evacuate wastes/chips (N°) 2 Motorized carpet to evacuate chips and wastes The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description Codpfx Asfz Dkgsbbeaa • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head. Horizontal position of the panel (workpiece) Numerical Control Xilog Plus 2 (Software Xilog Plus 2) Safety cabin (enclosure) of the working head. Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) With pushing system to automatically infeed the workpiece In-feeding table (with motorized belts) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 250 x 70 x 10 (2 x 5 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1300 x 80 (2 x 40 mm) Two (2) panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) Cajdpfx Abjfz I Ufobja No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) Inserting nozzle and glue injectors. Storage tanks for automatic feeding of the dowels

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste Cjdpfx Abjfz U Saobeaa • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Condition: excellent (used), AUTOMATIC Drilling and Dowels inserting LINE (2 machines): W12054A) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 5 bottom vertical units (each with 2 swivelling drilling heads at various spindles, HP 2.3 ea) Csdpjvnq Txsfx Abboaa - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 5 top pressing devices - No. 2 endless screws to evacuate the wastes. With NC (software Modul Tooling System) to control, manage and run the 2 machines of this line W12054B) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 8 inserting nozzles, such as Glue injectors and dowel drivers) - No. 3 bottom units (each with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 3 Top pressing devices - No. 2 endless screws to evacuate the wastes.