Used Common Rail Injectors for sale (9,143)

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 220 V, oil tank capacity: 5 l, machine/vehicle number: GDI-6000, Equipment: CE marking, It features a specially designed ergonomic structure. (The cabinet section also serves as a cargo carrying box.) Bsdez D H Dfopfx Akiedi Aluminum body, test rail, and bottle holder; flexible, custom test tubes resistant to hot and cold weather conditions, 6X150 (mg). From 1 injector to 6 injectors, with easy-to-connect fittings, injectors can be connected in a short time. Thanks to the injector drip reservoir, you can perform detailed spray pattern detection. Each test lasts a maximum of 90 seconds. With a 200 bar system (Electronic Measurement) specially designed for the GDI-6000, pressures are measured clearly. The GDI-6000 reaches a maximum of 200 bar. Thanks to this pressure, drip tests can be observed very clearly. With the ability to print receipts, you can provide test results to service centers and organizations that require them. Thanks to the DATABASE, the (mg) values that more than 6000 different types of injectors should deliver can be seen on the 7.0-inch touch screen. Thanks to the NEW-ENJ+ MODE, you can create and save injectors and injection parameters that are not found in the DATABASE. Thanks to the OHM-TEST MODE, you can measure the injector (OHM test) values. AUTO-1: Low speed (4000 RPM) AUTO-2: Medium speed (5000 RPM) AUTO-3: High speed (7000 RPM) DRIP TEST: Thanks to the Leaking Out mode, you can perform injector drip (leakage) tests clearly under pressure. Thanks to the MANUAL MODE, you can perform the desired RPM, PULSE, and TIMER tests with the RPM+ PULSE+ and TIMER+ settings.

Year of construction: 2026, condition: new, functionality: fully functional, usable tank capacity: 5 l, machine/vehicle number: GDI-ECO, Equipment: CE marking, TECHNOMAKS GDI-6000 The TECHNOMAKS GDI-6000 is a high-pressure injector test and cleaning device developed for performing testing, analysis, and professional cleaning operations on injectors used in gasoline direct injection systems. Thanks to its specially designed ergonomic body, aluminum test rail, and durable test chamber, it is suitable for professional service use. The device features 6 special test tubes, each with a capacity of 150 mg, that are resistant to different temperature conditions and have a flexible structure. With the GDI-6000, 1 to 6 injectors can be tested simultaneously. Thanks to its practical connection accessories, injectors can be quickly connected to the system. The special drip and spray observation chamber allows for detailed control of the injector's spray pattern, direction, and leakage. Each test operation can be completed within a maximum of 90 seconds. The device's specially developed electronic pressure measurement system can reach a maximum working pressure of 200 bar. Thanks to tests performed under high pressure, dripping and leakage problems in injectors can be observed more clearly. The integrated printer allows test results to be printed and presented to the customer or relevant organization. 6000+ INJECTOR DATABASE The GDI-6000 has a large database containing reference test values for more than 6000 injectors. The fuel quantity values that the injector should deliver can be viewed on the 7-inch touchscreen. NEW-ENJ+ MODE For injectors not found in the database, the user can create their own test parameters and save new injector information to the system. OHM TEST MODE Allows for the control of the electrical resistance values of the injectors. Thus, the OHM values of the injector coils can be measured during the test. AUTOMATIC TEST MODES AUTO-1: 4000 RPM low-speed test AUTO-2: 5000 RPM medium-speed test AUTO-3: 7000 RPM high-speed test By simulating different engine speeds, it enables the comparison of the fuel quantity and spray performance of injectors under various operating conditions. DRIP / LEAKAGE TEST Thanks to the Leaking Out mode, injectors are checked under high pressure. Leakage, dripping, and pressure loss problems in the injector nozzle can be observed. MANUAL TEST MODE RPM, PULSE, and TIMER values can be adjusted manually by the user. Thus, special test scenarios can be created using the desired speed, triggering time, and test time. PROFESSIONAL CLEANING MODES CLEANING 1: Performs pressurized cleaning by operating the injectors at different speeds between 1000–7000 RPM. CLEANING 2: Bodpfez D S Ezjx Akijdi Increases the open time of the injectors, allowing for more intense pressurized cleaning to be applied to the fuel passage channels and injector nozzles. REVERSE FLUSHING: Using special reverse connection accessories, liquid is applied to the injector in the opposite direction. This method ensures that the injector shaft, nozzle, and internal fuel channels are professionally cleaned. ULTRASONIC CLEANING MODE: During the ultrasonic cleaning process, the injectors can be operated in a controlled manner in the 1000–7000 RPM range. In this way, the mechanical operation and ultrasonic cleaning can be performed simultaneously.

Condition: used, Injector Gunther Type: PI 26 Number of needles: 26 Needle diameter: 4 mm Max. product width: 340 mm Cycles per minute: 15 to 55 cycles/min Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0.5 to 4.0 bar Bdsdpow Ra Rpjfx Akiji Electric power: 3 kW Voltage: 400 V Current: 16 A Machine dimensions (cm): Width: 70 Length: 170 Height: 200

Condition: good (used), Approximately 96m twin track rail system available from closed meat factory. Bodpsq Ii S Eofx Akijdi

Condition: used, Injector Inject Star Type: PI 36 Number of needles: 36 Needle diameter: 4 mm Bsdekqyhnjpfx Akisdi Passage mechanism type: Gear rack rail Electric power: 3kW Machine dimension in cm: 50x160x200cm

Condition: like new (used), Year of construction: 2017, load capacity: 1,000 kg, lifting height: 7,150 mm, construction height: 2,920 mm, operating hours: 204 h, fuel type: electric, mast type: triplex, Manufacturer + model: STILL EK-X 24 Mast: 3F7150 ID: 26112.5012 Category: Used Bdjdpjz Tdzbjfx Akioi Mast: 3F Lowered height: 2920 mm Lifting height: 7150 mm Capacity: 1000 kg Platform height: 6600 mm Picking height: 8200 mm Initialized: Yes Year: 2017 Hours: 204 hours Capacity: 24V / 1240Ah Options: FULL options!! - Triplex mast - FFL - Adjustable forks!! - Special SAFETY gates!! - Side guide / Rail guidance - (including end-of-travel braking under the battery) Truck width = 1480 mm Cabin width = 1400 mm Complete, LIKE NEW!!

Condition: used, machine/vehicle number: 008507, X axis working area: 5020 mm Y axis working area: 1380 mm Working Table: Pod and Rail Bjdszvwnbopfx Akisdi Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of tool changer positions: 16

Year of construction: 2026, operating hours: 5 h, condition: new, functionality: fully functional, NOMA NOWICKI MHM-21/84 F is a brine injector designed for the uniform injection of fish and seafood, both boned and unboned, and – after a quick needle change – any other boned or unboned products, such as poultry. Manufactured in 2026, the machine features 21 needle sockets (84 quadruple needles), steel needles operating at a brine pressure of up to 3 bar, microprocessor control with a color touchscreen, and an AISI 316 stainless steel construction in food-contact areas. Replacement parts are included. Key Advantages of the NOMA NOWICKI MHM-21/84 F Brine Injector The machine ensures even distribution of brine in delicate products, such as fish fillets and seafood, and, after changing the needles, is suitable for injecting poultry and other products, whether bone-in or boneless. Smooth adjustment of pressure and head speed, 2-mm-diameter needles, and three-level pressure adjustment allow the injection process to be tailored to various raw materials and recipes. Bdodps Aggiqjfx Akioi Manufacturer: NOMA (NOWICKI MACHINERY) Machine type: brine injector Model: MHM-21/84 F Serial number: 01126803 Year of manufacture: 2026 Power supply: 3 x 400 V, 50 Hz Marking: CE, manufactured in the EU Installed power: 2.4 kW, maximum current 12 A Pump power: 1.5 kW Construction: AISI 316 stainless steel in food-contact areas, AISI 304 in other components; designed for use in the fishing industry Number of needle sockets: 21 Maximum number of needles: up to 84 (quad needles) for fish and seafood, or 42 for poultry Needle diameter: 2 mm Head: easily replaceable, with quadruple needles as standard, top-side needle loading Head drive: top-mounted, NORD gearbox with frequency converter, stepless speed control Number of head strokes: 21 – 44 strokes/min Maximum head stroke height: 110 mm Maximum product height before injection: approx. 90 mm (up to 110 mm after injection) Removal clamp: adjustable to 3 heights, prevents over-injection Conveyor: easy-to-clean plastic belt, 325 mm wide Conveyor feed per head stroke: adjustable, 16; 35; 75 mm/cycle Brine pressure: continuously adjustable from 0.5 to 3.0 bar (in 0.1 bar increments), up to 3 bar as standard Brine pump: centrifugal, high-efficiency, stainless steel, controlled by a variable-frequency drive Filtration: multi-stage, easy to clean, with an additional tubular filter for improved brine purification Brine tank: stainless steel, 80 L, with brine mixing (preparation) and drainage Injection rate for a single pass (salmon): up to 12% Controls: microprocessor-based HMI, MITSUBISHI color touchscreen, MITSUBISHI PLC, variable-frequency drives on the gearbox and brine pump Throughput (approximate, for 1 pass): Herring fillets: injection rate approx. 10%, approx. 200 kg/h Salmon fillets: injection rate 8 – 12%, approx. 250 kg/h Poultry fillets: injection rate 25 – 30%, approx. 500 kg/h Chicken drumsticks: injection rate 20%, approx. 500 kg/h Chicken necks and wings: injection rate 12%, approx. 400 kg/h

Condition: good (used), The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Bdjdjz N Smdepfx Akioi

Year of construction: 1974, condition: excellent (used), Cryogenic tank rail cars, gas, wagons, tank wagons, gauge, CO2, carbon dioxide, storage CO2 gas wagons, tank wagons, carbon dioxide, transportation, cryogenic tank rail cars, storage They are constructed to storage liquid CO2. manufacturer: Rheinstahl AG year of manufacture: 1974 volume: 51,79 m3 pressure: 20 bar Bjdpjhfv Ehjfx Akisdi test pressure: 30 bar Export from EU carbon dioxide, transportation, LCO2, gas. Please contact us for more details.

Condition: used, In - Line Vertical Borer for Solid Rail Components etc Heavy duty steel welded frame 4 no Vertical Heads with Single Drills 2 no Vertical Heads with Triple Drills Motor power 3hp each. Pneumatic control for drilling stroke All heads adjustable along X axis via rack and pinion movement. Bsdpfx Aszd Ur Hjkisdi Scale for positioning. Max. drilling between outside heads 1600mm. All heads with cross slide support & adjustment in / out Adjustable depth stroke to heads 5 no Pneumatic clamps - adjustable in lateral positioning. Two hand push button safety control.

Condition: like new (used), Year of construction: 2022, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 181070, Scope of supply for the overhead rail blast machine Blasting cabin: 100% manganese Transport system Y-rail: included Abrasive recovery hopper: included Automatic abrasive cleaning: included Automatic abrasive quantity control: included HMI: Siemens TP7 Bedpfx Ajy Avh Nekisdi Remote access (via VPN): included Characteristics of the installed turbines Number: 2 units Drive power per turbine: 11.0 kW Speed control: included System characteristics Blasting tasks: surface finishing including cleaning, roughening, peening, derusting, descaling Workpiece designation: Various steel parts Coverage (%): depending on component Capacity (parts/hour): individual Abrasive (material and size): aluminum and aluminum-zinc abrasive or steel abrasive in various sizes possible Abrasive quantity (initial fill): approx. 1000 kg Workpiece material: steel Hook load: max. 450 kg Workpiece temperature: max. 80° C Workpiece height: 1300 mm Part diameter (min/max): 1100 mm Sound pressure level without soundproofing: approx. 85 - 90 dB(A) Optional offers: Dry filter including secondary filter EUR 18,880.00 Pipework 5m EUR 1,980.00 Technical data of the filter system: Type: dry filter Air flow capacity: 2,600 m³/h Filter surface area: 36 m² Residual dust concentration: ≤ 2.0 mg/Nm³ Residual dust concentration with after-filter: ≤ 1.0 mg/Nm³ Supervision and installation starting from EUR 3,500.00 The system is delivered in CE-compliant design. Exempted are linked systems or systems where essential components are added or modified by the customer. In such cases, AGTOS provides an installation declaration. Upon request, we are happy to send you a layout plan.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2020, suspension: air, color: white, = Additional Options and Accessories = - Rear doors - Refrigeration/freezer unit - Air suspension = Notes = Schmitz Cargobull SCB*S3B - Frigo Schmitz - Hooks/rail system/meat hanging - ATP/FRC - Pallet box Year of manufacture: 11-6-2020 WSM000005243735 Hooks/rail system/meat hanging Pallet box Hours: diesel 20,429 / Electric: 777 Box: 13.40 - 250 - 264 = Further Information = General Information Year of construction: 2020 Axle Configuration Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 2: Max. axle load: 9000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 3: Max. axle load: 9000 kg; Tire tread left: 30%; Tire tread right: 30% Bdodpsz Dfu Nofx Akiei Weights Unladen weight: 9,762 kg Payload: 32,238 kg GVW: 42,000 kg Functional Cooling: 20 °C to 20 °C Body manufacturer: Schmitz Cooling engine: Diesel and electric Condition Technical condition: good Optical condition: good

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: KA28 - 14/796737, ABUS overhead crane, crane runway, bridge crane, workshop crane, overhead travelling crane Equipped with ABUS technology Load capacity / lifting capacity 1.6 t - 1,600 kg Span 9,550 mm, external dimension approx. 9,700 mm Year of manufacture 1998, floor control and scale included Crane is equipped with super fine lifting – speed 0.08–0.8 / 5 m/min Lifting height 6 m Hoist: GM816 L6-204.41.064.E Overall height from top edge of crane to hook approx. 710 mm (320 mm beam + 390 mm hoist) End carriage length without buffers approx. 150 cm Optionally, 2 x 40 m HEA240 crane rails available Crane is dismantled and immediately available Very good condition, inspection logbook available Column slewing cranes and wall-mounted slewing cranes are also available Demag KBK and ABUS HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Bdedjw Hnvtepfx Akioi Shipping by freight forwarder possible, please inquire with zip code Collection preferred

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 5,050 mm, construction height: 2,900 mm, operating hours: 3,183 h, fuel type: electric, mast type: duplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + S - 2W5050 ID: 25053.2983 Category: Used Mast: 2W Lowered height: 2,900 mm Lifting height: 5,050 mm Bdsdpfx Aszq Udvjkioi Capacity: 1,000 kg Platform height: 4,250 mm Picking height: 5,850 mm Initial lift: Yes Cabin width: 1,000 mm Year: 2015 Hours: 3,183 h Battery capacity: 48 V / 465 Ah Options: - Side guidance / Rail guidance

Condition: used, Meat Master MM-26 / BI/52 Brining Machine For sale is a professional, mobile brining injector from the premium brand Inject Star, model MM-26. This machine from the Austrian quality manufacturer Pökelmaschinen Ges.m.b.H. Vienna (Inject Star) is a classic in butcher shops, for direct marketers, and in artisanal meat processing. It is ideally suited for the precise and uniform injection of brine into pieces of meat, with or without bones. The MM-26 series, due to its more compact dimensions, is perfect for small to medium-sized butcher shops, catering suppliers, or direct marketers (e.g., farm shops). The brining machine is made entirely of robust stainless steel and is in excellent, very clean condition for its age (see detailed images). The mechanical needle system with springs and the electromechanical control are extremely robust and, in contrast to modern touchscreen controls, are hardly susceptible to costly electronic damage. Technical data: Manufacturer: Inject Star (Pökelmaschinen Ges.m.b.H. Vienna) Bedpfx Aez Dtg Hokiedi Trade name: MM-26 / Meat Master 26 Type / Model: MM-26 / BI/52 Connection value (rated power): 2.5 kW Operating voltage: 3x 400V / 50 Hz (three-phase power) Year of manufacture: 1999 Equipment: Spring-loaded needles (automatic bone protection / needle deflection system), sturdy stainless steel articulated belt, integrated pressure regulation with manometer, mobile base with rollers, suction hose with filter basket. Safety: CE marking present, transparent splash guard at the workstation. "Everything from one source: We will gladly offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 7,700 mm, construction height: 3,050 mm, operating hours: 2,089 h, fuel type: electric, mast type: triplex, Manufacturer + model: CROWN SP 3522 - 1.0 Mast: 3F7700 ID: 23033.2653 Category: Used Mast type: 3F Lowered height: 3050 mm Lifting height: 7700 mm Capacity: 1000 kg Platform height: 7000 mm Picking height: 8600 mm Cabin width: 1370 mm Bjdpfx Akezut Syjiedi Year: 2015 Hours: 2089 hours Battery: 24 V / 775 Ah - Hoppecke Options: Fully equipped - Mast: Triplex FFL - Equipped with side guides & sensors (INCLUDING side rollers/wheels & sensors!!)

Condition: used, VETTER Krantechnik PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual traversing unit, and electric chain hoist For sale is a used VETTER PROFI crane system from Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical Data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI crane system as a two-rail portal with crane bridge Year of construction: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,100 mm Support distance L: 5,570 mm Support distance B: 5,100 mm Beam length: 5,470 mm Overall dimensions of system: approx. 6,020 x 5,800 mm Bottom edge of crane bridge: 4,145 mm Bottom edge of portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/30/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of construction: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Traversing unit / trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual traversing unit SiCO-HF Load hook Control / operating element Main switch Steel supports and beam structure Documentation / test book available Accessories as shown in the pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Based on experience, the total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition as shown in the pictures System was assembled and in operation Test book and documentation available Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual traversing unit SiCO-HF Support and beam structure Control / operating elements Documentation / test book Bsdpfxjzgrzqo Akiodi Accessories as shown in the pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or forwarding is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: like new (used), Pokomat P16/320 Injector Bdjdpolt T Udefx Akisi Stainless, 16 needle injector, capacity 800Kgs/h, with two sets of needles, belt dimensions 1300mm x 300mm, 3Ph

Year of construction: 2014, condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Stabau roller rails S1-RGSCH 100 / 8, load capacity / year of manufacture: 2014 / in stock & immediately available / very good condition Price per pair: €2,190.00 net / €2,606.10 gross Load capacity: 8,000 kg Load center: 1,500 mm Weight: 665 kg (complete set) Overall length: 3,000 mm Overall width: 450 mm Please see attached images for precise pocket dimensions. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (tel. [phone number]) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. Bodpfxjznruye Akisdi We are an official Magni telehandler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Errors and prior sale excepted! Internal ID: 140204 = Further information = Year of manufacture: 2014 New: No Suitable for: Machines for loading and unloading Please contact Marius Herden for further information.

Condition: used, Year of construction: 2011, 2011 Fomaco FGM 48F brine injector for poultry and fish – used Fomaco needle injector with 48 needles for chicken, poultry and fish. The Fomaco FGM 48F is a brine injector from the Danish specialist Fomaco (Food Machinery Company). With 48 needles it injects brine or marinade evenly into chicken, poultry and fish: more flavour, a more tender product and a consistent weight per piece. The product passes under the needle head on a plastic modular belt; injection pressure and belt speed are set to suit your product. Bedpfx Aez Hqy Nekiodi Built in 2011, stainless steel construction, 3 x 400 V / 11 kW and 6 bar compressed air. The machine is in Emmeloord and can be viewed and tested with your product. Key features - 48 needles for an even distribution of brine or marinade - Suitable for chicken, poultry and fish, including delicate products - Plastic modular conveyor belt, quick to remove for cleaning - Stainless steel construction, built for the wet environment of a meat or fish processor - Injection pressure and belt speed adjustable per product - Built in 2011, 3 x 400 V / 11 kW, 6 bar compressed air Refurbishment if you want it Take the machine as it stands here, or let us go through it first in our own workshop: inspection, replacing needles and wear parts, cleaning and testing with your product. Exactly what is done is agreed per customer. Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full details on our website: [](/) Machine type: Brine injector (needle injector) Condition: Used Number of needles: 48 Application: Chicken, poultry and fish Conveyor: Plastic modular belt Construction: Stainless steel Connection: 3 x 400 V, 50 Hz; 11 kW; max. fuse 35 A Compressed air: 6 bar

Condition: used, mileage: 5,800 km, first registration: 10/1983, overall weight: 6,000 kg, color: green, gearing type: mechanical, number of seats: 1, Year of construction: 1983, Equipment: all wheel drive, trailer coupling, MB Trac 700 K Road and Rail Dual-purpose vehicle Rail guidance Bdjdpfx Asi R Ag Tskiei Coupling rod UVV 07.2012 approx. 1500 operating hours currently in daily use.

Condition: good (used), functionality: limited functionality, fuel type: diesel, ID43343 MACHINE TYPE: Road-rail excavator Bjdpfxsxw Hg Aj Akijdi BRAND: Atlas MODEL: 1104 ENGINE: Diesel, Deutz BUCKET: Yes CONDITION: Normal

Year of construction: 2014, condition: ready for operation (used), number of axes: 7, This 7-axis Yaskawa Motoman ES165D + rail was manufactured in 2014. It is designed for advanced automation tasks, providing flexibility and precision in various applications. If you are looking to get high-quality automation capabilities, consider the Yaskawa Motoman ES165D + rail machine we have for sale. Contact us for further details. Bsdsy T Iiyspfx Akiedi • 7th-axis linear rail/track (external axis)

Condition: good (used), Year of construction: 2014, operating hours: 6,884 h, load capacity: 1,300 kg, lifting height: 5,700 mm, fuel type: electric, mast type: duplex, construction height: 3,250 mm, Manufacturer + model: MAGAZINER EK 1300 Mast: 2W5700 ID: 25072.5431 Category: Used Mast: 2W Forks: 1200 mm Lowered height: 3250 mm Lifting height: 5700 mm Capacity: 1300 kg Platform height: 4150 mm Picking height: 5750 mm Initial inspection: Yes Year: 2014 Hours: 6884 hours Capacity: 48 V / 930 Ah Options: VNA truck / Man-up Bodszuti Espfx Akijdi - SAFETY doors with TILTING FUNCTION!!! - Side guidance / Rail guidance