Used Inserter for sale (1,792)

Condition: used, Year of construction: 2006, Kern 2500 Document Inserter & Multimailer, Kern Man Machine Interface, 10 & 6 x 9" Infeed Hopper, (6) x Document Infeed Hoppers, 12 Position Carousel Packing Unit, Outfeed Conveyors, Cognex Scanner System, SMX 3.2m Footprint. S/No. 6017410.001 (2006) Ijdpfoy Sg Thox Aagjat Location: These lots are located in Aldridge, West Midlands, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2019, We have here a Pitney Bowes F700 also known as Relay 7000 envelope inserting system available. This machine is year 2019 and only has done 1.763.359 envelopes. Works without any problem after we have tested it fully. Iedpoy R A D Tofx Aageat Configuration: 2 main feeders - high capacity feeders 4 docoument feeders - with the extra feeder trays you can switch between documents and folded inserts Folding station Envelope inserting module and station.

Condition: used, Dimensions: 40 x 12 x 1.5 mm Isdpfxjt Sr Uhs Aagoat Set: 25 pieces Type: HL Board

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control Ijdpetx E Rqjfx Aagoat - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: excellent (used), CNC Flexible LINE for Drilling, Routing and Dowels Inserting With BECKHOFF numerical control (Windows-based software) Panel length: Min 260 mm / Max 2500 mm Panel width: Min 96 mm(*) / Max 1200 mm Panel thickness: Min 13 mm / Max 25 mm (*) Panel width: min. 120 mm on the 3rd BAT for dowels inserting Iodsy N Ucfopfx Aageat A) HEDGEHOG Loader with in-feed transverse roller conveyor B) 1st FLEXIBLE CNC Mod. BAT-DTW, through-feed system - 2 drilling heads with 21 spindles each (2 x 2.2 kW) - 1 groove-cutting saw (2.2 kW) - 2 groove-cutting saws for the rear panel (2 x 0.37 kW) - 2 drilling heads with 12 spindles each (2 x 2.2 kW) - 1 horizontal groove milling unit (4.4 kW) C) 2nd FLEXIBLE CNC Mod. BAT-DTW, through-feed system - 4 drilling heads with 9 spindles each (4 x 1.6 kW) - 2 drilling heads with 3 horizontal spindles each (2 x 1.6 kW) - 1 milling unit (4.4 kW) - 2 drilling heads with 5 spindles each (2 x 1.6 kW) D) 3rd FLEXIBLE CNC Mod. BAT-DTW, through-feed system - 1 Horizontal glue application unit (pump and air-operated glue dispenser with 13 nozzles) - 1 Dowel insertion unit - 1 milling unit with 8-position changer (5 clamps) (4.4 kW) - 1 drilling head with 12 individually adjustable double spindles (1.6 kW)

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, 6 station swingarm machine, overhaul 2026 completely new PLC machine control (no pitney bowes control) Operation via color touch panel electronic gripper controls, Program can be extended at any time and adapted to customer requirements, various reading systems can be integrated Iasdpfx Aasdyk Sdsgst Roller ejection with programmable divert bin Warranty 1 year

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, 6 station swing arm inserting machine General overhaul 2022 PLC controlled Color touch panel for user guidance Iasdpodygvqofx Aagot Any kind of reading can be integrated

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, 6 station swingarm machine, overhaul 2022 completely new PLC machine control (no pitney bowes control) Operation via color touch panel electronic gripper controls, Program can be extended at any time and adapted to customer Ijdpfx Aodyk Sasagoat requirements, various reading systems can be integrated Roller ejection with programmable divert bin Warranty 1 year

Condition: reconditioned (used), Year of construction: 2014, General Overhaul 2025 6 stations machine Iasdpfx Aod N S I Toagjt 4 grippers, 2 shuttle feeder, Envelope formats from DL - C4 processable Shuttle feeder material up to 16 mm, special version up to 30 mm PLC control, reading systems can be integrated, online systems can be integrated

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, 6 station swing arm inserting machine Iasdehl H Irepfx Aaget General overhaul 2026 PLC controlled Color touch panel for user guidance Any kind of reading can be integrated

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Features and technical specifications: - With line drilling head with 7 spindles and locating pins - Spindle pitch: 32 mm - With drilling head for BLUM hinges - With drilling head for Hettich hinges - With the respective pressing dies - Motor: 400 V, 0.75 kW, 2800 rpm - With stop bars Availability: short notice Storage location: 63934 Röllbach Ijdpfx Aasyncppsgeat

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm Iajdpfowml S Esx Aagst 16,000 cycles per hour

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Iajdpoyxm Hzjfx Aagst Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: used, Year of construction: 2013, Bore diameter , mm Number of heads horizontal , St. Number of heads vertical , St. 2 pcs. Götzinger drilling and milling centers ----- For sale on behalf of a customer! 2 identical machines: One machine for "left" parts and one for "right" parts. The machines can also be used individually. Iasdpsv N N Spefx Aagjt The machines were controlled via window manufacturing software, but can also be operated via the machine software. Both machines are equipped identically: - Left and right drilling units for front-end drilling. - 3 units for drilling and milling for longitudinal machining. - Parts are loaded once, and the unit carrier then moves for the various machining operations. Installation length per machine approx. 6 m. Individual sale possible: Price per machine 10,000 Euro See the enclosed PDFs for more information.

Condition: new, Year of construction: 2025, Advantages of Pre-glued Dowels • No additional glue required when inserting dowels • No cleaning required for the water supply system Advantages of the DübelJet • Recoil-free gun • Simple handling • Mobile handheld device • Universal application range Technical Data of the DübelJet Ijdpfx Aswu Dnnsagsat Dowel system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (default setting, adjustable from 30 to 40 mm) • Dowel projection: 12 mm (default setting, adjustable from 7 to 20 mm) Universal application • Insertion of pre-glued dowels (with water), especially in furniture manufacturing • Insertion of positioning dowels (without water) made of wood or plastic, e.g., in frame construction or in combination with screws or cabinet connectors

Condition: defective spare-parts repository (used), Year of construction: 2008, functionality: limited functionality, type of input current: AC, DS 1000 with collection station for up to 21,000 sheets per hour, A4 folding station, and 2 insert stations. All functions are operational. The cross-conveyor belt on the inserting head has lost a cam, which now causes constant jams. The machine is being offered quickly as a parts donor or for refurbishment. Several belts, feed rollers, and spare parts are included. The machine always performed excellently, especially with sorted A4 sets. For three-sheet jobs, 6,000 insertions were never a problem. We still have three smaller machines and no longer handle large jobs. Therefore, we are parting with this one. The machine is now dismantled and ready for transport. Iasdjyyxk Ujpfx Aagst

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, glue application, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1,300 mm, feed speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion projection adjustable 7-20 mm via mechanical digital counter, drilling depth 0-35 mm (with drill length GL 70 mm) is automatically set in conjunction with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indication in the glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm 1 pc. TCT control with: Integrated industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas can be assigned with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, error diagnosis with plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel insertion station (programmable from 5-40 mm) travel speed max. 30 mm/sec 1 Single-spindle vertical drilling unit from above, 0.65 kW, (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) 4 Vertical-angled clamping cylinders 10° with holders, additional 1 Keyboard with holder Iasdpfx Asy Ih Skoagst Availability: by arrangement; currently being overhauled at Ganner factory Location: Austria

Year of construction: 2026, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_27_3, PressOne P1S-10 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-10 Main press technology: ball screw with AC servo drive Maximum pressing force: 100 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: * 120 mm / s Press speed: max 10 mm / s Throat: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 5 kW Control: P1S TC12 touchscreen 12 " Iaodpfx Aoy A Ntleaget Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Year of construction: 2026, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_34, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force 120mm/s feed speed 200mm/s opening speed Iasdpfxjy A Ntfs Aagot Tool carousel for 4 lower tools Tool case with 22 pressing tools Side holder with color boxes TC12 touchscreen control 36 month guarantee

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S5_21, PressOne P1S-5 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-5 Main press technology: ball screw with AC servo drive Maximum pressing force: 50 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: 120 mm / s Press speed: max 10 mm / s Throat: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing Isdoy A Nq Dopfx Aagoat - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Year of construction: 2026, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_32, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force 120mm/s feed speed 200mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 pressing tools Laser pointer Work light Iodpfxsy A Nqqe Aagjat Side holder with color boxes TC12 touchscreen control 36 month guarantee

Year of construction: 2026, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_31, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force 120mm/s feed speed 200mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 pressing tools Laser pointer Work light Iajdey A Nqdjpfx Aagot Side holder with color boxes TC12 touchscreen control 36 month guarantee

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S5_20, PressOne P1S-5 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-5 Main press technology: ball screw with AC servo drive Maximum pressing force: 50 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: 120 mm / s Press speed: max 10 mm / s Throat: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 touchscreen 12 " Iasdey A Nn Nspfx Aagjt Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Year of construction: 2026, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_30, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force 120mm/s feed speed 200mm/s opening speed Tool carousel for 4 lower tools Iaedey A Nnvjpfx Aaget Tool case with 22 pressing tools Laser pointer Work light Side holder with color boxes TC12 touchscreen control 36 month guarantee

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 18GG1012, Neopost DS 180i envelope inserting machine from a demonstration unit, practically NEW, hardly used, with only 17,245 envelopes processed on the counter!!! The machine has been fully inspected by a certified technician and is in absolutely new and flawless condition, without any defects. Includes a stacking belt! Iajdpfx Aowl Ihteagjt Technical data: Max. volume (per month) 180,000 Throughput up to 4,500 envelopes/hour optional up to 5,500 envelopes/hour Gathering capacity (multiple extraction) up to 6,900 sheets/hour optional up to 9,400 sheets/hour Envelope formats C6 (optional), DinLang, C6/5, C5 Container capacity for adhesive fluid 10 liters Folding capacity up to 8 sheets (80 g/m2) 22" touchscreen monitor yes Job memory unlimited Automatic job setup yes System capacity documents/feeder up to 500 or 1,000 System capacity envelopes up to 800 Paper thickness documents min. 70 g/m2 - max. 120 g/m2 Max. insert thickness* 4 mm *depending on the feeder module used Folding types single, roll, zigzag, and double parallel folds, as well as no fold