Used Injection Machine for sale (64,850)

Condition: used, Year of construction: 2001, Technical details: screw diameter: 30 mm closing force max.: 2000/ bei 175 bar kN opening force: 10 t screw revolutions per minute : 100 U/min control: FA-Inject 2000SIJECT OP37 system pressure: 175 bar injection pressure max.: 1600 bar injection volume max.: 800 cm³ closing speed: 200 mm/min ejection stroke: 150 mm Ksdeu Nu N Rjpfx Anwjdn force of ejector: 120 kN opening stroke: 550 mm daylight: 700 mm total power requirement: 36,5 kW weight of the machine ca.: 6,0 t dimension machine xH: 3,0x1,9x3,9 m dimensions electric cabinet LxWxH: 0,8x0,6x2,15 m Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - best suited for the production of special sealing products - tank volume hydraulics 110 l, heating and cooling method thermal oil circulation system, nozzles stroke 20mm - nozzle type: single nozzle, heating capacity per heating plate: 8,1 kW, heating plate size 600x500mm, heating plate temperature=250°C The machine is not connected. We sell the machine as described and as is *

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Driving force of the moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Clearance (h x v): 710 x 710 mm Tool opening stroke: 920 mm Minimum tool mounting height: 380 mm Opening distance: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 l Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum tool weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g Injection rate: 527 cm3/s Screw speed standard / optional: 1/min 285/349 Ksdoxu Uvajpfx Anwedn Screw speed standard or stage 1: 95 PS Screw speed optional or stage 2: 117 PS Nozzle system force: 82 kN Fully hydraulic 2-platen clamping system PV control for the injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color screen and Floppy disk drive (3.5 inches) for data backup Plasticization: 1 complete thermoplastic plasticization unit in wear-resistant design, screw diameter 70 mm with backflow prevention and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 3626

Condition: reconditioned (used), Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 22AVV injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Kjdpfeywx Hqex Anwodn Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Hytronika Steuerung, The control units are in perfect condition. They were completely overhauled a few years ago directly by ARBURG and come from a cleanroom production facility for medical technology. Since then, they have been stored in our warehouse as spare units, properly maintained. Kdodjwpp Dqepfx Anwon Price: per unit. Of the original 7 units, two are currently still in our warehouse. The other 5 units are now back in use in Greece and Bulgaria.

Condition: good (used), Manufacturer: Arburg Year of manufacture: 1999 Operating hours: h Machine number: 178930 Type / Model: 270C-300-100 Clamping force: 30 t Min. mold installation height: 225 mm Max. opening stroke: 325 mm Max. platen distance: 500 mm Clear tie-bar distance: 270 x 270 mm Platen size: 400 x 400 mm Screw diameter: mm Max. dosing volume: 90 cm³ Shot weight PS: 80 g Holding force: 31 kN Connection: 25 kW Accessories/equipment: 1 core puller Condition: good Weight: 1.8 t Dimensions: 3,700 x 1,700 x 1,800 mm Kdjdpfx Aexf Dxrsnwsn

Condition: good (used), Manufacturer: Arburg Kdedpfxezbx Ale Anwen Year of manufacture: 1999 Machine number: 175831 Type / Model: 370S-800-350 Pump operating hours: 82,478 h Automatic cycle hours: 74,766 h Clamping force: 80 t Opening stroke: 450 mm Tool installation height: 200 mm Tie bar spacing: 370 x 370 mm Platen size: 638 x 638 mm Screw diameter: 40 mm Maximum injection volume: 182 cm³ Shot weight: 153 g Holding force: 45 t Connection: 23 kW Accessories / Equipment: 1 core pull, take-out gripper Condition: good Weight: 3.8 t Dimensions: 4,300 x 1,500 x 2,100 mm

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Kdedpfou Awalsx Anwsn Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Ksdpfxsv Stbmo Anwjdn Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS Kdsdpfx Anjzc N U Iowsn The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Ksdpfxszc N Uno Anwedn Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Kdjdezc N Ubopfx Anwsn Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Controller with 15 hot runner zones Injection assembly hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m Kedpfx Ajzc N T Rjnwodn All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production Line with Side-mounted Arburg Multilift Robot / 2K Machine Year of Manufacture: 2003 Injection Unit: Screw diameter: 40 mm Kdsdpfszc N Twsx Anwsn Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with side-mounted Arburg Multilift robot 2K (two-component) machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner integration Reinforced injection units – bimetallic Proportional valves on injection units – precision injection Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 520S 1600-400/170 e² / Production line with Geiger robot Year of manufacture: 2012 Injection unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Dosage volume: 154 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Control system with 12 hot runner zones Reinforced injection units – bimetallic Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast operation) The machine features a built-in servomotor in the injection unit responsible for dosing the plastic Parallel movements Screw diameter in the vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg brand conveyor belt and sorting flap Original Weber brand rotary table, highly precise – electrically driven (integrated inverter in the machine) Rotary table and robot available as an additional purchase Dimensions: Kdodpjzc N Tqjfx Anwsn Weight: 8140 kg Length/Width/Height: 4.81 x 1.84 x 3.45 m All offered machines are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided, or you can participate in live technical tests at our facilities in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Kedjzc N Tkjpfx Anwsdn Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Arburg 520H 1500-290 e² / Hybrid machine / Production line with Wittmann W818 side robot / Operating hours: 21,588 h in automatic mode Year of manufacture: 05.2016 Injection unit: Screw diameter: 30 mm Injection weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 520x520 mm Size of the platens: 695x695 mm Ejector: electric Clamping unit: toggle Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: 21,588 h in automatic mode Kdodpfx Ajzc N Tdonwsn Euromap 67 Robot interface Air valve x 5 Core pull control Air core pull x 3 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving The injection unit is driven by a servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic tool height adjustment Central lubrication Parallel movements Robot Wittmann W818 Year of manufacture: 2016 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; Axis C - pneumatic Travel distances in axes: X-420, Y-1000, Z-1500 Touch control panel Safety package for robots Robot with adapter, conveyor belt with electric height adjustment, protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 6250 kg Length/Width/Height: 4.45x1.56x2.21 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 04.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Control system with air valve Core pull control Hot runner control x 12 Kedezc N Syepfx Anwsdn Injection unit hardened - bimetallic Main drive motor - servo motor with inverter - energy saving Injection unit driven by servomotor controlled by inverter Machine equipped with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure regulation The injection molding machine was operated in a so-called "cleanroom," and is fitted with extra protective devices against contamination and two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis driven by servo motor (electric); X, Y, and B axes (rotation) pneumatically operated Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 6,820 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Arburg Multilift H Side Robot Year of Manufacture: 2013 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1,650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping mechanism: toggle lever Control system: SELOGICA – touchscreen Additional Equipment: Hybrid machine: high-speed, energy-efficient and very quiet Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened – bimetallic Main machine motor – servo motor driven by frequency inverter – for energy savings Injection unit driven by a servo motor controlled by an inverter Machine equipped with cylinder/battery with compressed nitrogen (additional charge for fast operation) Centralized lubrication Automatic mold height adjustment Kistler sensor – mold pressure control The injection molding machine was operated in a so-called “cleaning room”, equipped with additional protective devices against contamination as well as two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2013 5-axis robot: Z-axis servo-driven (electric); X-, Y- and B-axis (rotation) pneumatically operated Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of the robot and conveyor belt at additional cost Kjdpfx Aszc N Smonwjdn Dimensions: Weight: 6,680 kg Length/width/height: 5.03x1.56x2.21 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2009, Arburg 520H 1500-400 e² / Hybrid Machine Kdodpfxjzc N R Nj Anwen Year of manufacture: 2011 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2,000 bar Dosage volume: 201 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface Core pull control Control with 8 hot runner zones Injection unit hardened - bimetallic Main machine motor - servomotor driven by inverter - energy saving Injection unit driven by servomotor, control via inverter Machine equipped with cylinder/battery with compressed nitrogen (additional charge for fast operation) Central lubrication Parallel movements Priamus sensor - tool pressure regulation Dimensions: Weight: 6,010 kg Length/Width/Height: 4.67x1.56x2.21 m All offered machines are started by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 09.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy saving, and very quiet Control with air valve Core pull control 12-fold hot runner control Injection unit hardened - bimetallic Main drive motor - servo motor with inverter for energy saving The injection unit is powered by a servo motor, controlled by inverter Machine with cylinder / compressed nitrogen accumulator (additional charge for fast cycling) Central lubrication Automatic mold height adjustment Kistler sensor – mold pressure regulation The injection molding machine was operated in a so-called 'cleaning room', equipped with extra protective devices against contamination as well as two fume absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis driven by servo motor (electric); X-, Y-, and B-axis (rotation) pneumatic Safety package for robot Robot with adapter, conveyor belt with electric height adjustment, protective enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 6840 kg Length/Width/Height: 5.03x1.56x2.21 m Ksdpfx Aezc N R Aonwodn All machines offered are test run by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 520H 1500-400 e² / Hybrid Machine Year of manufacture: 2011 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 cc Clamping unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping mechanism: toggle lever Control system: SELOGICA - touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 on the fixed platen side Air valve x 3 on the moving platen side Hydraulic core pull x 1 on the fixed platen side Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy-saving Kdjdpszc N Rvsfx Anwon The injection unit is driven by a servo motor controlled by an inverter Machine equipped with cylinder/battery with compressed nitrogen (additional charge for fast operation) Central lubrication Parallel movements Automatic mold height adjustment Dimensions: Weight: 6550 kg Length/Width/Height: 4.67x1.56x2.21 m All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2009, Arburg 470C 1500-400 Year of manufacture: July 2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 cc Clamping unit: Clamping force: 150 t Type distance: 470 x 470 mm Clamping platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Core pull control Injection unit hardened - bimetal Kedpfezc N N Sex Anwjdn Screw diameter can be changed Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pumps/Motor: 18.5 kW Heating power: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2009, Arburg 470C 1500-400 Year of manufacture: July 2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 cc Clamping unit: Clamping force: 150 t Type distance: 470 x 470 mm Clamping platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Kodpjzc N Nlefx Anwedn Additional equipment: Core pull control Injection unit hardened - bimetal Screw diameter can be changed Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pumps/Motor: 18.5 kW Heating power: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2004, Arburg 470C 1500-675 Year of manufacture: 2004 Injection unit: Screw diameter: 60 mm Injection weight: 427 g Injection pressure: 1440 bar Metering volume: 508 ccm Clamping unit: clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 685x685 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Kodpfx Anezc N Nfewjdn Euromap 12 Robot interface Core pull control Injection unit hardened - bimetal Parallel movements Dimensions: Weight: 4660 kg Length/width/height: 5.00x1.93x2.22 m Drive: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Arburg 470C 1500-400 with the Wittmann W711 robot Year of construction: 2008 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Metering volume: 254 ccm Clamping unit: Clamping force: 150 t Distance between tie bars: 470x470 mm Size of the clamping platens: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 1 Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Robot Wittmann W711 Year of construction: 2007 4-axis robot: 3 axes are driven by servomotors (electric); axis C Travel in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 4900 kg Length/width/height: 4.44x1.63x2.09 m Drive: Pump/motor: 18.5 kW Heating output: 9.7 kW Total output: 28.2 kW All offered machines are started by our service technicians before sale. Kdjdpfjzc N I Usx Anwen It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request