Used Knitting Machine for sale (65,441)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM Nedpfx Acez Eh Egj Aodb TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Year of construction: 2010, condition: excellent (used), machine/vehicle number: 09942, Mercerizing machine No.: 09942 Year of production: 2010 Nodpsyhn A Iofx Ac Ajdb Manufacturer: Goller Textilmaschinen GmbH Am Hammeranger 1 95126 Schwarzenbach/Saale GERMANY The machine is used for mercerizing cotton fabrics (knitted fabrics) with caustic soda solution in three stages: treatment with alkaline solution, washing (stabilization) and rinsing (neutralization).

Condition: used, Year of construction: 2022, functionality: fully functional, KARL MAYER PROSIZE - HIGH-PERFORMANCE and INNOVATED SIZING UNIT for processing spun yarns -28 Pos : max. working width in the creel: 2200 mm -200 mm : working range -Beam creel :max. beam flange diameter: 1000 mm -Warp Tension Control -Automatic squeeze pressure control Nodpfx Acezb Uzws Aodb With all required accessories.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Njdpfjxxb Rrsx Ac Aedb Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2022, Two nearly new and identical Karl Mayer warp knitting machines are available. Gauge: E32, working width: 130 inch (approx. 3300mm), guide bars: 4, ground guide bars: 4, max. machine speed: 2760rpm. The machines are located in the USA, however, export and transport to Europe without customs clearance are included. Documentation available. An on-site inspection is possible. Nedpezc Rdqjfx Ac Aedb

Condition: excellent (used), Automatic machine with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines. Suitable for packaging individual or already packaged products such as boxes, trays, hanks of cable, parquettes, or light to very light products with a minimum height of 3mm such as boxes, linen, reams of paper, magazines, leaflets. In production up to 23.09.2026 Price € 7,995.00 Quantity 2 machines available Shipping can be arranged for the buyer Njdsz D Ugujpfx Ac Asdb

Condition: used, Year of construction: 2021, functionality: fully functional, CMS 530 ki Multi Gauge-Type 816 000 E3,5.2 - 3 System - 50" - 20 Yarn Ndedsyaypdjpfx Ac Asb 26 units available for this model

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Ndsdpfsz Eh Nljx Ac Aeb Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor.

Condition: used, Year of construction: 2004, Seven UNIVERSAL MC flat knitting machines are available as a package, 1) UNIVERSAL MC-825 CXL, gauge: E3, year of manufacture: 2004, width: 64in/1630mm, 2) UNIVERSAL MC-835, gauge: E5, year of manufacture: 2004, width: 48in/1220mm, 3) UNIVERSAL MC-720, gauge: E5, year of manufacture: 1995, width: 90in/2300mm, 4) UNIVERSAL MC-720, gauge: E8, year of manufacture: 1995, width: 90in/2300mm, 5) UNIVERSAL MC-720 PJ, gauge: E8, width: 90in/2300mm, 6) UNIVERSAL MC-720 PJ, gauge: E10, width: 90in/2300mm, 7) UNIVERSAL MC-720, gauge: E10, width: 90in/2300mm, documentation partially available, an on-site inspection is possible, not connected to power. Ndjdpfjz Euc Esx Ac Aeb

Condition: ready for operation (used), Various flat knitting machines with different gauges and Groz-Beckert needle sets are available. 1) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 2) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 3) Stoll CMS 303 TC, gauge: E12, nominal width: 1270mm, needle set: 12. 4) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 5) Stoll CMS 340 TC, gauge: E12, needle set: 12. 6) Stoll CMS 411, gauge: E10, needle set: 10. 7) Stoll CMS 422 TC, gauge: E12, needle set: 12. 8) Stoll CMS 422 TC, gauge: E12, needle set: 12. 9) Stoll CMS 422.6, gauge: E12, needle set: 10. 10) Stoll CMS 422.6, gauge: E12, needle set: 10. 11) Stoll CMS 422.6, gauge: E14. 12) Stoll CMS 422.6, gauge: E14. 13) Stoll CMS 430.6, gauge: E12, nominal width: 2440mm, needle set: 12. 14) Stoll CMS 430.6, gauge: E12, nominal width: 2440mm, needle set: 10. 15) Stoll CMS 430.6, gauge: E12. 16) Stoll CMS 922, gauge: E12, needle set: 12. 17) Stoll CMS 922, gauge: E12, needle set: 12. 18) Stoll CMS 933 HP, gauge: E14. 19) Stoll CMS 933 HP, gauge: E12-10, needle set: 12. 20) Stoll CMS 933 HP, gauge: E12-10, needle set: 10. 21) Stoll CMS 933 HP, gauge: E12-10, needle set: 10. 22) Stoll IBOM/b, gauge: E14, nominal width: 180mm. 23) Stoll IBOM/c, gauge: E14, nominal width: 200mm. Including 2 needle sets and various conversion kits Stoll, Groz-Beckert and Universal. Documentation available. An on-site inspection is possible. The machines are still in operation and are maintained and well-kept. Individual sale possible. Nodpey Igb Defx Ac Ajdb

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Ndedpox D Tbmefx Ac Asb Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1984, Width: 84in, gauge: E24, yarn feed: EBC, hole needles: GB1-2-3, speed: 1,000rpm, pattern gear: N-gear GB1-4, yarn monitoring: Laser 4080, with brushing unit, an on-site inspection is possible. Ndsdpfx Acsz Epruo Asb

Condition: excellent (used), Year of construction: 2021, Bed Dimension 1,270mm x 254mm. (3 'T' Slots 16mm x 63mm). Maximum Table Load 350Kg. Axis Travel 'X'=750mm, 'Y'=384mm, 'Z'=406mm. Quill Travel 115mm. Spindle Taper SK30. Spindle Speed Range 60-4,200rpm (Motor 2.25KW). Powered Drawbar. S/No. 13279 (2021) Please note a loading charge of £50 + VAT to be added to buyer's invoice. Ndedsz Dg H Hspfx Ac Aob With Coolant System, Quantity Of Assorted Toolholders, Table Guarding, Drawbar, Work Light & Manual. Approx Dimensions L3,220 x W2,580 x H2,180mm. Weight 1,250kg.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: div., Equipment: type plate available, CMS 530 HP; E 7.2; Year of manufacture: 2014; Quantity: 1 CMS 822 HP; E 7.2; Year of manufacture: 2014; Quantity: 9 CMS 822 HP; E 3.5.2; Year of manufacture: 2014; Quantity: 4 Scomar band machine; E 10; Quantity: 2 EMIL NESTEL; yarn machine; Quantity: 1 Steiger patent machine; E 12 / E 8; Quantity: 1 Hirschburger; spooling machine; Quantity: 1 Stoll program; M1 plus, Quantity: 3 Ndedpfx Acowqdx Ss Aeb various suppliers

Condition: used, Year of construction: 2012, functionality: fully functional, Mayer&Cie knitting machines. Model RELANIT 1.6 ER 28E 30"48F. 2012 Сlass 28 Cylinder diameter 30 Number of needles 2640 Number of reels 48 Uncut (sleeve) The average daily intake is 100 kg Type of fabric: pique, jersey, footer (stripe of any color up to 4 colors); jacquard The surface density of the harsh: from 100 to 200 grams Ndjdpfx Aceyh Hyvo Aob of jersey - 100-215 footer - 145-195 peak - 125-200 Width of the harsh canvas: from 140 to 240 cm 140-230 190-230 185-240 Lycra: yes Lycra filling: in each system, MER 3 Number of MER: 13

Condition: ready for operation (used), Year of construction: 1988, Two similar Karl Mayer warp knitting machines are available. 1) Karl Mayer KS 3, year of manufacture: 1988, working width: 130 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66H-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-VP19, speed: 1500, yarn monitoring: Laser 4080, fabric monitoring: Scanner 5090. 2) Karl Mayer KS 3, year of manufacture: 1986, working width: 84 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66/3-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-V-3-19, speed: 1300, yarn monitoring: Laser 4080. An on-site inspection is possible. Nsdpfx Acjyz An Ts Ajdb

Condition: ready for operation (used), Year of construction: 1997, A Raschel warp knitting machine Karl Mayer is available. Working width: 130inch, gauge: E32, yarn feed: EBA-1, guide bar element: C-32-28/P2, guide needle element: Spec-38-45 G105, latch needle element: L-32-93H-0, knock-over comb element: S-32-93H-0, speed: 1800-2000, yarn monitoring: Laser 4080. Including computer. Documentation available. An on-site inspection is possible. Ndedpfx Acsyz Apde Asb

Year of construction: 2000, condition: ready for operation (used), Rotational speed: 900/min, connected load: 2.7kVA, weight: 3.98t, with documentation. Ndjdpfxsiy D Agj Ac Ajb

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox Nodpfx Acszkbirj Aedb For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Ndsdpfx Acjzzzm Es Ajb Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system.

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Ndsdpfx Acezi Awhe Asb Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Ndjdpfx Aey Ni Ivsc Ajb Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2008, XYZ SMX 5000 CNC Vertical Turret Milling Machine With Prototrak SMX Control Table Dimension 1,930 x 355mm (4 'T' Slots). Maximum Table Load 850kg. Axis Travel 'X'=1,524mm, 'Y'=596mm, 'Z'=520mm. Quill Ø116mm. Quill Travel 127mm. Spindle Nose to Table 620mm. Spindle Centre To Column Face 520mm. Speed Range 40-5,000rpm (7.5kW Motor). Spindle Taper ISO40. Power Drawbar. S/No. 11100 (2008). Nodpfezvp E Eex Ac Aedb With Coolant System, Table Guarding, Work Light, Vertex Heavy Duty Vice (Jaw Width 205mm), Indexing Head 3 Jaw Chuck 200mm, Centre Height 170mm, 8 Drawer Steel Cabinet With Contents Of Spindle Tooling & Clamp Sets. Approx Overall Dimensions L5,805 x W3,143 x H2,690mm. Weight 3,100kg. Note: Machine Had Control Upgrade 2023.

Condition: used, Year of construction: 2017, Used 2014 XYZ SMX 5000 CNC / Manual Bed Milling Machine in lovely condition. Supplied with ProtoTRAK SMX Control, Electronic Handwheels, TRAKing & DXF File Reader, Power Drawbar, Fully Programmable Spindle Drive and Custom-Made Splash Guards. SPECIFICATION: TRAVELS: X Axis: 1,524 mm Y Axis: 596 mm Z Axis: 540 mm Maximum Daylight Under Spindle: 610 mm Quill Travel: 140 mm TABLE: Length: 1,930 mm Width: 356 mm Nodpfezgwq Dox Ac Aedb T-Slot Width: 15.9 mm Maximum Table Load: 850 kg SPINDLE: Motor Power: 5.75 kW (7.5 HP) Speed Range: 40 - 5,000 rpm Taper: ISO 40 Quill Diameter: 116 mm Programmable Spindle Drive HEAD: Head Tilt Left: 45° Head Tilt Right: 45° CONTROL: ProtoTRAK SMX Conversational CNC Control Electronic Handwheels TRAKing Function EQUIPMENT: Power Drawbar Splash Guards GENERAL: Machine Weight: 3,100 kg

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Njdsydvzdepfx Ac Aedb Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required