Used Exhaust systems for sale (54)

Condition: good (used), 2 LOSMA aspirations Bwelewgv Scoir Tq Tjl

Condition: good (used), Year of construction: 2007, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system -Manufacturer: Keller, dry separator type Vario 2 -Power of dust extraction fan: 5.5 kW / 2850 rpm -Volume flow: 3300 m³/h Belir Teudqbvoq Tswl -Total pressure: 3.50 kPa -Individual components/technical data: see photos -Dimensions: 1915/1100/H3260 mm -Weight: 1180 kg

Condition: good (used), Year of construction: 2022, Functionality: unexamined, machine/vehicle number: 3163870, overall weight: 700 kg, total width: 800 mm, total length: 1,300 mm, total height: 2,400 mm, volume flow: 1,500 m³/h, - Operating voltage: 230/400 V - Frequency: 50 Hz - Connected load: 4 kW - Operating pressure: ±50 mbar - Max. operating temperature: 40 °C - Separator type: Wet separator - Air flow rate: 1,500 m³/h - Available negative pressure at the raw gas connection: 700 Pa - Max. sound pressure level: 75 dB - Nominal diameter of the clean gas connection: 450 mm - Water capacity of the disposal container: 150 l - Fan data – Total pressure: 5,000 Pa Bslir Tqjv Tq Hcj Tjwl

Condition: good (used), Year of construction: 2006, Previous use : Extraction of graphite dust Protection class IP65 Bsljwg A Hyoir Tq Tewl Negative pressure approx. -27m/bar Air flow rate 2650 m³/h Air flow rate at fan 4500 m³/h Motor 2.2 kW .

Condition: like new (used), Power: 7.5 kW Voltage: 280 V / 50 Hz Bsliowhdvfsr Tq Tjwl

Condition: used, Centrifugal fan NICOTRA - Gebhard type REM 18-0500-4W-16-C RD/0 Make No. 142-943705-458068/1 Year of manufacture 2012 Volume flow max. 10825 m³/h = 180m³/min. density 1,2 kg/m³ Air inlet Ø 500 mm Air outlet 640 x 320 mm Motor speed 1440 rpm. Motor power 2,2 kW Mains connection 400 Volt 50 Hz - fan wheel with 12 fan blades - direct flanged drive motor - mounted adapter ring with flex sleeve Ø 500 mm - adapter flange for air inlet from Ø 500 to 600 x 305 mm rectangular flange - Galvanized sheet metal housing Space requirement L x W x H 950 x 750 x 890 mm Bwolopp D Iveir Tq Tjl Space requirement with pallet L x W x H 1270 x 990 x 1500 mm Weight centrifugal fan 110 kg weight with pallet 135 kg very good condition

Condition: good (used), Year of construction: 2005, machine/vehicle number: 6678, type of input current: three-phase, input voltage: 400 V, overall weight: 255 kg, total width: 660 mm, total length: 660 mm, total height: 2,200 mm, volume flow: 1,500 m³/h, noise level: 68 dB, filter area: 15 m², intake manifold diameter: 200 mm, power: 2.2 kW (2.99 HP), frequency: 50 Hz, temperature: 30 °C, ambient temperature (min.): 5 °C, KAPPA extraction/compact dust extractor Bjliev Ia Hber Tq Tswl The extraction was active on our 3D laser. For indoor use only.

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas suction fan Bslerw A U Ieir Tq Tewl -Manufacturer: Coral, dry grinding dust extraction filter system type GRINDEX -Power: 0.75 kW / 2810 rpm -Individual components/technical data: see photos -Dimensions: 855/750/H1085 mm -Weight: 120 kg

Condition: good (used), Year of construction: 2018, power: 0.55 kW (0.75 HP), AR Filtrazioni ARF 700 YB air purifier, built in 2018. The ARF series is designed for the extraction and purification of micro-dust and fumes generated during dry/wet processing. The incoming air first passes through a metal filter sequence and a synthetic filter, which traps larger particles. In the next phase, the air is passed through a very high-performance HEPA filter (H13) in accordance with the European standard EN 1822, before being released back into the environment completely clean. Dimensions: 460 x 500 mm, H 1,050 mm Weight: 80 kg Believ T Db Ter Tq Towl Flow rate: 700 m³/h Connection: 100 mm #8347

Condition: good (used), Year of construction: 2017, Functionality: fully functional, total width: 950 mm, total height: 3,530 mm, table width: 840 mm, space requirement length: 1,680 mm, table height: 1,600 mm, For sale is a wet scrubber with type approval, approved for the separation of aluminum dust. The system consists of two extraction tables with a width of 1680 mm, a filter, and intake lines. The exact dimensions can be found in the attached drawing. A detailed description can be provided upon request. The new price of the system was approximately €35,000. The system was only used for approximately two years as a project. It was in very good condition. Built in 2017. Operation of the wet scrubber is permitted in Zone 22. A current inspection report for the system is available and is valid until June 24, 2025. The system must be dismantled on site. We can arrange transport if necessary. Bjlirsv Nhgrj Tq Towl For further information, please contact Mr. Spieles.

Condition: used, Year of construction: 2015, air flow quantity 1800 m³/h suction power 1,275 kPa power capacity 1,5 kW weight ca. 125 kg Boljvvxr Seir Tq Tjwl Dimensions (HxWxD) 2,0 x 1,15 x 0,67 m One used oil dust collector - Produced in 53809 Ruppichteroth/ GERMANY - 3,13 A/ 50 Hz - 3AC 400 PE

Condition: good (used), Year of construction: 2002, ILT UNIFIL MS 1MRV40 – Industrial Air Filter / Extraction System for Oil and Emulsion Mist Technical Specifications: Manufacturer: ILT Industrie-Luftfiltertechnik GmbH Model: UNIFIL MS 1MRV40 Year of Manufacture: 2002 Serial Number: 8160 Voltage: 3AC 400V Current Consumption: 3.2 A Frequency: 50 Hz Air Flow Rate: Approx. 2,700 m³/h (free-suction) Motor Power: 1.5 kW (Manufacturer: Siemens) Filter Stages: Multi-stage with pre-filter, main filter, and optional post-filter Housing Material: Robust sheet steel construction, painted Dimensions: Approx. L 1,145 mm x W 670 mm x H 1,150 mm Weight: Approx. 120 kg Connection: Pipe connection for exhaust air duct Available Condition: Used, functional, regularly serviced Description: For sale is a professional ILT UNIFIL MS 1MRV40 extraction system, a high-quality air filtration system for the efficient separation of oil and emulsion mists generated in metalworking and other industrial processes. The unit was specifically designed for continuous operation and does not require regeneration phases. It is ideal for turning, milling, grinding, and machining centers where airborne contaminants must be effectively filtered. Special Features: ✔ Highly efficient air filtration: Multi-stage filter system with washable pre-filters for a long service life ✔ Modular design: Filter inserts are replaceable and adaptable for different applications ✔ Energy efficient: Low power consumption with high extraction performance ✔ Robust construction: Sturdy housing for industrial environments, durable components ✔ Flexible installation: Can be installed directly on machines or centrally ✔ Easy maintenance: Tool-free filter replacement, low operating costs ✔ Made in Germany: High quality and reliable performance Areas of application: CNC machining centers Lathes, milling machines, and grinding machines Metal and plastics processing Industrial air purification in production facilities Oil and emulsion mist separation Shipping by freight forwarder available upon request Bwjlirsv Nv Nbo Tq Tjl Sold without warranty or guarantee. If you are interested or have any questions, please contact us!

Year of construction: 2008, Condition: excellent (used), Acword BR100 Extractor with workstation Acword brand metal extractor with Bosch Rexroth workstation and drawer cabinet Exhaust air capacity 1010 m3/h  Connection spigot 100 mm  Noise level 83 dB Input under pressure 2550 Pa  Voltage 400 V Weight 65 kg Bjlir Tohufbcoq Tewl Exhaust air velocity 32 m/s  Frequency 50 Hz Height 1490mm Filtration area 6 m2  Motor power 1.1 kW  Width 594 mm Volume of waste container 0.0338 m3  Number of phases 3  Length 670 mm Complete factory closure, wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, cartridge dust extraction system, dust separator -Manufacturer: DCE dust extraction system type UMA 152 G5 -Extraction fan power: 3 kW -Inlet: Ø 200 mm -Individual components: see photos -Dimensions: 1060/955/H2220 mm -Weight: 283 kg Bwelir Tsv Inl Sjq Tjl

Condition: new, Year of construction: 2017, operating hours: 1 h, Functionality: fully functional, suction capacity: 1,450 m³/h, New extraction system to be sold due to company closure. Bwslir Tqev T I H Ts Tel

Condition: new, Special price €2,500 instead of €3,410 excl. VAT. Dormatec AirBench FN066784A - Extraction Table Capacity: 1500 m³/h Filter Category: A Bwslijvdruior Tq Tel Thanks to a wide range of filters, the extraction tables are suitable for all types of contamination (metal, plastic, stone, wood, glue fumes, etc.). Dust, steam, or fumes are immediately extracted through the work surface. The extraction tables are available in various sizes and configurations. All you need is a power outlet: plug & play! Like the FP model, the FN extraction table is a welded steel table with a load capacity of 150 kg on the tabletop and access to the filters is provided at the front of the table. - Industrial design - Robust welded filter housing made of 2 mm sheet steel - Steel surface made of 3 mm sheet steel - Perforated dia. 4 mm - Surface treatment: Powder coating in RAL 7035 (light gray) Filter: A - Non-sparking dust Aluminum, plastics, atmospheric dust, flour or similar, fiberglass, cleaning aircraft electronics Technical specifications: - Capacity: 1500 m³/h - Power: 0.17 kW - Suction area: 610 x 656 mm - Table dimensions W x H x D: 674 x 660 x 840 mm

Condition: used, Year of construction: 2023, Functionality: fully functional, overall weight: 120 kg, total width: 700 mm, total length: 550 mm, total height: 1,800 mm, volume flow: 1,500 m³/h, noise level: 60 dB, power: 0.76 kW (1.03 HP), The Airtower Compact 1500 is a lightweight, very compact plug & play filter tower. The device is suitable for extracting welding fumes. The two-stage filtration eliminates pollutants from the room air safely, economically and in a microbiologically inactive manner. Cleaned air is returned to the room near the floor without any drafts, while the contaminated air is sucked in at the top. The filter mat in the outlet openings supports the even distribution of the supply air and protects the device from external dust entering when the device is not in use. The air is conveyed by an EC fan with an integrated controller. This ensures efficient operation. The Airtower Compact 1500 scores points for the small amount of space required for installation. The integrated device control with operating display regulates the system and shows all important information. The system is designed for an average volume flow of 1,500 m³/h. Bwslir Tqov Eu Nxo Tel The Airtower Compact 1500 was used as a demonstration machine, e.g. at trade fairs and at customers' premises. The system is therefore used, but works perfectly technically. After use, such as at trade fairs, the system was always cleaned and checked by our service technician. The Airtower is in stock. If collection is not possible, we can also organize shipping for you. We only need the delivery address for the transport costs. Please refer to the data sheet for the technical data of the system.

Condition: used, Year of construction: 1995, machine/vehicle number: 433/0695, input power 3.6 KW - 3 x 1.2 KW tank capacity 213 litres additional load 300 kg vacuum 22,000 Pa air rate flow 100 litres / sec. suction hose 50 mm electrical data 220 V / 3.6 KW space requirements width - 900 x depth - 1,100 x height - 1,900 mm weight approx. 150 kg Bwslieiyzq Uor Tq Tjl  

Condition: new, Model Name Boliogvqzcor Tq Towl Airtower FT 20.000

Condition: good (used), Year of construction: 1998, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, cartridge dust extraction system -Manufacturer: BTR Environmental, Unicell cartridge dust extraction system -Type: C16-2K7 Bwjlir Tju Uww Soq Tel -Extraction fan power: 3.0 kW -Inlet: Ø 220 mm -Individual components: see photos -Dimensions: 1210/1040/H2340 mm -Weight: 474 kg

Year of construction: 1990, Condition: used, GoodAire 1800 Belir Tsg Si Sgeq Tewl output 1.800 cbm/Stunde weight of the machine ca. 200 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, 400 V / 50 Hz < 75 dB(A) power capacity 15 kW volume capacity 20.000 m³/h weight 1590 kg Modular plug & play airtower for hall extraction of welding fumes with integrated, soundproofed Fan, automatic, differential pressure controlled Filter cleaning, system control with color display, particle pre-separation and IFA - tested filter cartridges. The system is for a volume flow of average 20,000 m³ / h designed 1st filter stage - main filter: Filter area: 222 m² Number of filters: 6 pieces Dust class according to DIN EN 60335-2-69: M. Degree of separation:> 99.9% Cleaning: Jet - Pulse Compressed air connection: NW 7.2 mm, 4-6 bar, oil and water free 2nd filter stage - fine dust filter. Filter area: 65 m² Filter class according to ISO 16890: ISO ePM1 80% 3rd filter stage - Synthetic fiber mats: Filter area: 8 m² Filter class according to ISO 16890: ISO coarse 60% Total filter area: 295 m² Dimensions: Width filter unit: 2,066 mm Depth filter unit: 1,756 mm Height of filter unit: 3,643 mm Bolir Tqoppgd Ee Tewl Dust container: 200 liters Version Sanders incl .: - NOVUS efficiency package FT20.000 - timer - NOVUS particle sensor

Condition: used, Year of construction: 2006, filter system, filter device, coolant filter, filter candle system -Manufacturer: Bohncke, filter device type fg-250 -Pump: Type pme-2010 0.53 kW -Filter: Filter candles 20" see photos -Dimensions: 650/340/H1050 mm -Weight: 46 kg Bwslieurn S Nsr Tq Tel

Condition: new, 1860 m³/h Bsliehp S Tror Tq Towl Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. Bjlirekm Ryne Tq Towl The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.