Used Injection Blowing Machine for sale (65,839)

Condition: excellent (used), Year of construction: 1998, clamping force: 80 kN, screw diameter: 38 mm, The Boy 80T In Very Condition The Machine Done Low Hours One Owner Used In Training Centre Csdpfx Acjyhrqio Tehb

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43225, total length: 5,500 mm, total width: 2,000 mm, overall weight: 6,000 kg, Small handling system installed in the machine. A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. Csdpfx Acszrb Sps Tohb The machine has not been tested but was operational until the very end.

Condition: excellent (used), Year of construction: 2011, operating hours: 57,077 h, functionality: fully functional, machine/vehicle number: 179742, clamping force: 700 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, injection weight: 89 g, Here, as a specialist dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of injection moulding machines for more than 25 years. Vertical rotary table injection moulding machine – complete service history (annual documentation) Manufacturer: Engel Type: Insert 200H/70 Serial number: 179742 Year of manufacture: 2011 Operating hours: 57,077 h Control unit: CC 200 Language: German/English Fully functional Very well maintained condition Machine comes from the original German owner xxxxx without illustrated peripheral equipment xxxxx Extras: - Light curtain / light barrier - Freely programmable inputs and outputs Chjdpjy Ir Nysfx Ac Tsb - 9 freely programmable inputs, programmable by station - 9 freely programmable outputs - Handling interface Euromap 67 - Charge amplifier for cavity pressure-dependent post-pressure switching, including corresponding graphic pages - 3 volt-free monitoring inputs for monitoring peripheral equipment, such as temperature controllers - Euromap 63 interface for connecting to machine data acquisition system - Hot runner and shut-off nozzle control - Complete maintenance booklet - Language: German / English Injection unit: - Screw diameter: 30 mm - Shot weight: 89 g PS - Injection pressure: 1,451 bar / boosted 2,205 - Injection volume: 99 cm³ Clamping unit: - Clamping force: 70 tons / 700 kN - Rotary table diameter: 1,200 mm - Opening stroke: 305 mm - Ejector stroke / force: 105 mm / 20.1 kN - Fully electric clamping unit Warranty: - Warranty until initial commissioning Loading/Shipping: - Free loaded onto buyer's truck, or free delivery (FOB) against reimbursement of shipping costs - Available ex-stock Hannover, Germany

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 17659, total length: 11,000 mm, total width: 3,000 mm, total height: 2,600 mm, overall weight: 40,000 kg, Includes handling equipment, peripherals, and conveyor belt. A used machine is being sold as part of a site closure. Cedpfx Acjzrd Sls Tshb Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine Csdpfxjwm Iy Ee Ac Tohb This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66931, clamping force: 6,600 kN, screw diameter: 98 mm, clearance between the columns: 900 mm, displacement volume: 3,885 cm³, injection pressure: 2,100 bar, This machine underwent a complete overhaul and was retrofitted in 2023. Codpfx Acozlrc Sj Tjhb

Condition: excellent (used), Year of construction: 2010, clamping force: 1,000 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, injection pressure: 1,580 bar, injection weight: 232 g, mold height (min.): 250 mm, Clamping unit • Clamping force 1000 kN (100 t) • Set of mounting plates, central mounting, 125 mm bore • Electromechanical ejector • Quick-release coupling for the ejector • Connection safeguard for the ejector plates • Programmable mold height adjustment from the operator panel • Top-open guard with a drop-down window for the parts removal device Injection unit • Complete 45 mm screw with high wear resistance • Open nozzle 45 mm, nozzle tip with a 15 mm radius, heating band for open nozzle • Nozzle clamping force adjustable and programmable • AED - electromechanical dosing drive Chjdszxg Txjpfx Ac Tsb • aXw Control ScrewPilot Drive system - HIDRIVE hybrid • H series: hybrid concept combining electric drives with accumulator hydraulics • Drive unit with 11 kW motor, 21.4 l/min charging capacity • Technology level: accumulator drive – fast movements with low power consumption • Continuous oil cooling and filtration • Hydraulic accumulator tested during start-up Control system • Selogica direct with touchscreen • Complete set of six software packages: extended monitoring, extended movements, production control, optimization and operator assistance, quality assurance, documentation • Printer interface, serial USB • CompactFlash interface for saving data sets • Operator authorization via chip card according to EUROMAP 65 Hydraulic cores • Core 1 – simultaneous movement, P/Q regulation, programmable • Core 2 – simultaneous movement, P/Q regulation, programmable • Both circuits are fully integrated with the Selogica cycle sequence and controlled directly from the panel • Note regarding connections: the machine was delivered from the factory without standard quick-release couplings for the core circuits. Stäubli SBA 08.7103/JV/PA couplings/nipples with a G1/2 connection thread are required.

Condition: used, Injection molding machine ARBURG, type Allrounder 221 M 350-75 Serial No. 163646, Year of manufacture 1995 Clamping force 35 tons (350 kN) Screw diameter, presumably Ø 25 mm Platen size 342 x 250 mm Mold size, max. 221 mm Mold mounting height 150 to 300 mm Column spacing 221 mm (center distance) Opening stroke - platen stroke, max. 200 mm Ejector stroke 60 mm Ejector force 27 kN Hydraulic oil tank capacity 120 liters (delivery without oil) Heating capacity 4 kW Motor power, hydraulic pump 7.5 kW Power supply 400 volts, 50 Hz, 12 kW - ARBURG MULTRONICA control system with foil keyboard and screen Chjdpozx Etwsfx Ac Tsb - Stainless steel granulate hopper, 50 liters, on the injection unit - Adjacent control cabinet Space requirement without transport pallet, L x W x H 2750 x 1350 x 1850 mm Transport dimensions on pallet, L x W x H 2750 x 1700 x 1900 mm Weight approx. 1300 kg Good condition

Condition: used, Year of construction: 2008, screw size 18 mm closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h weight 2030 kg ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition Interface for robot systems in accordance with EUROMAP 67 available A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm Chjdpfx Aeywzv Ioc Tob - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm - Blowing unit fitted

Condition: not inspected (used), Year of construction: 1998, operating hours: 130,240 h, functionality: unexamined, machine/vehicle number: 34477, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, includes handling linear robot Cedpozrd Aqofx Ac Tohb A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: excellent (used), Year of construction: 2010, ARBURG 370 U 600-290 injection molding machine Year of manufacture: 2010 Chodpfxezw Azve Ac Tob Clamping unit Clamping force: 600 kN (60 tons) Distance between tie bars (H × V): 370 × 370 mm Dimensions of mounting platens (H × V): 510 × 510 mm Minimum mold height: 200 mm Maximum daylight opening: 600 mm Opening stroke: 400 mm Ejector stroke: 125 mm Ejector force: 30 kN Injection unit Screw diameter: 35 mm Injection volume: 144 cm³ Injection shot weight (PS): 132 g Maximum injection pressure: 2000 bar Screw L/D ratio: 20 Screw torque: 450 Nm Maximum injection speed (PS): 140 g/s Number of heating zones: 4 Nozzle stroke: 240 mm Dimensions and weight Machine dimensions (L × W × H): 3.80 × 1.45 × 2.12 m Total weight: approx. 3,500 kg

Condition: excellent (used), Year of construction: 2017, ENGEL DUO 11050/2300 injection molding machine Year of manufacture: 2004 Operating hours: 70,029 h Type: hydraulic, two-platen, large-format injection molding machine Clamping unit • Clamping force: 23,000 kN / 2300 t • Dimensions of mounting plates: 2900 × 2500 mm • Distance between columns: 2000 × 1600 mm • Minimum mold height: 700 mm • Maximum mold height: 1890 mm • Maximum opening width: 3800 mm Injection unit • Screw diameter: 135 mm • Injection volume: 8870 cm³ • Injection shot weight for PS: 8071 g • Maximum injection pressure: 1600 bar • Screw: replaced in 2011 • Screw design: reinforced, adapted for processing special materials Additional equipment • Magnetic plates for mold mounting – functional and ready for use • Number of hydraulic cores: 2 • Number of mold heating zones / hot runner channels: 36 • Number of hydraulic cascades: 10 • Mold tilting option • Robot: not included Magnetic mold clamping system The machine is equipped with functional magnetic plates, enabling quick mold mounting and replacement. The system is fully operational and constitutes a significant piece of additional equipment for the machine, especially with frequent mold changes. Chedjzvwl Tjpfx Ac Teb Machine weight • Weight of the main unit: approx. 113 t • Weight of the control cabinet and additional elements: approx. 18 t • Total approximate weight: approx. 131 t

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43227, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, Weight approx. 9000 kg. For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been tested but was in working order until the end. Codpozqapdefx Ac Tehb

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: Chsdpfx Aowm Iz Njc Tjb • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: good (used), Year of construction: 1996, operating hours: 24,222 h, functionality: fully functional, Description Type BOY 80M Year of manufacture 1996 Chjdpfezvdmqsx Ac Tob Operating hours 24,222 hours Screw (high wear resistance) 42 mm Injection pressure max. 1532 bar Shot volume max. 200 cm3 Closing force 80 T Max. distance between tie bars 410 mm Min. mold height 250 mm Distance between platens max. 725 mm Dimensions 1,000 x 3,395 x 1,995 mm (L x W x H) Weight 3250 kg Options: • Core pull • Includes a Procan control system. • High wear-resistant 42mm screw and cylinder • Color contact (potential-free, max 5A) • Signal control for coloring The machine has recently been tested and is fully operational!

Condition: good (used), Year of construction: 2000, clamping force: 1,600 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, Basic data Clamping force: 160 t Year of manufacture: 2000 Control system: Selogica Injection weight: 154.7 g Injection unit .../675 Screw diameter: 35 mm Chedpfxezt Ikbj Ac Tjb Injection volume: 170 cm³ Injection weight: 154.7 g Mold clamping unit 160/... Clamping force: 160 t Mold plate dimensions: 728 × 728 mm Distance between columns: 520 × 520 mm Mold height: 250 mm Opening stroke: 650 mm Maximum mold plate distance: 900 mm Ejector force: 50 kN Ejector stroke: 175 mm

Condition: used, Year of construction: 2010, operating hours: 66,000 h, machine/vehicle number: PR23, Used NEGRI BOSSI 800T injection molding machine - year 2010Technical Specifications & Performance DataThis Negri Bossi VECTOR 800T injection molding machine delivers high-output performance for large-format plastic parts and packaging components. As a second hand industrial machine from 2010, it combines robust mechanical design with generous mold space and powerful injection characteristics, ideal for heavy-duty applications and supporting upstream production for industrial packaging and beverage production accessories.Manufacturer: Negri BossiModel family / code: VECTOR 8000H8400 (V800 designation)Year: 2010Working hours: 66000Screw diameter: 110 mmShot volume: 5160 cm³Shot weight: 4700 gInjection pressure: 1620 barEjection stroke: 350 mmTie bar spacing (H x W): 950 x 1100 mmPlaten size (H x W): 1400 x 1550 mmOpening stroke: 1080 mmMold height (min–max): 400–1100 mmCore pull circuits: 4 (2+2)Air circuits: 4Robot interface: YesMachine dimensions (L x W x H): 10850 x 2600 x 2305 mmMachine weight: 38750 kgAdvanced Automation & Control SystemsThe VECTOR platform is engineered for reliable automation and process stability. This unit is equipped with a robot interface for seamless cell integration and features multiple core pulls for complex tooling strategies. The electrical screw motor option provides precise dosing control and energy-efficient plasticizing.Integrated robot interface for automated part removal and in-mold operations4 core pull circuits (2+2) to support advanced mold functions4 pneumatic air circuits for auxiliary tooling requirementsElectrical screw motor option for accurate dosing and repeatabilityProduction Line Integration CapabilitiesThis injection molding machine can operate as a standalone cell or integrate within a broader industrial packaging workflow. It is well-suited for producing large or multi-cavity parts used in packaging systems and can support upstream manufacturing for components associated with a used bottling line or beverage production environment.Inline or standalone operation with engineered robot interfaceAccommodates complex tooling and multi-cavity moldsCompatible with automated conveyors, part handling, and quality stationsSupports format changes through mold/tooling exchange and core pull configurationMachine Condition & Maintenance HistoryThis second hand Negri Bossi injection molding machine from 2010 shows 66000 operating hours. Presented in working condition and ready for operation, it is suitable for facilities seeking proven performance and reliable uptime within industrial packaging or component manufacturing.Operational status: Ready for ... Chodpfx Aceziyy To Tjb

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Cedpfxozvm Dlj Ac Tehb Nozzle: open Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: used, Year of construction: 2020, operating hours: 8,555 h, functionality: fully functional, clamping force: 1,500 kN, heating capacity: 19 kW (25.83 HP), pump power: 71 W, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 90 A, We are offering this used ARBURG 470 C 1500-400 injection molding machine, manufactured in 2020, from ongoing production. Includes INTEGRALPICKER. Type: 470 C 1500-400 Machine No.: 254634 Year of Manufacture: 05/2020 Operating Voltage: 400 V, 50 Hz Control Voltage: 24 V Csdpfx Acjzhar He Tjhb Rated Current Motor/Heater: 71 / 19 A Total Current: 90 A Total Connected Load: 53.5 kW Pump Operating Hours: 8555 40 mm plasticizing cylinder set (without nozzle) Open nozzle 40 mm with internal thread for screw-in nozzle tips Internal thread up to injection unit 290: M 24 x 1.5 Internal thread from injection unit 400: M 36 x 2 Price: €48,000.00 Available from the end of December 2026. If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Inspection under power possible at any time! Technical specifications as per the pictures! Chjdpsy Iwlaefx Ac Tjb Machine is immediately available!

Condition: not inspected (used), Year of construction: 1997, operating hours: 145,298 h, functionality: unexamined, machine/vehicle number: 31378, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, A used machine from a site closure is being sold. Chodpfx Acezqabmo Tsb Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end. Weight approximately 9000 kg.

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Cjdpezvgu Djfx Ac Tshb Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Screw diameter: 30 mm Cjdpfx Asvygh Nec Tohb Weight: 3,200 kg Available immediately from stock

Condition: used, Clamping force: 800kN, an on-site inspection is possible. Chsdpezyq S Isfx Ac Tjb

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Cedozvmpnjpfx Ac Tshb Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t