With cooling unit and compressor
Capacity: 2000-2500 bph
Bottle: 0,5 l
Bokq393pri
The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015.
Technical parameters :
- screw diameter: 40 mm
- screw L / D: 22: 1
- injection weight (HDPE): 190 g
- maximum speed of the screw: 10-225 rpm.
- heating power: 8.3 kW
- injection clamping force: 292 kN
- blow clamping force: 46.7 kN
- maximum plate size (L x W): 400 × 270 mm
- minimum mold thickness (H): 180 mm
- mold heating capacity: 3 kW
- opening: 220 mm
Etdbijn
- drying cycle: 3.5 se...
Output: 280kg/h, clamping force: 400kN, installation height: 500mm, opening stroke: 900mm, dimensions clamping plates: 700x830mm, drive power: 129kW, heat output: 43.1kW, connected load: 172.1kW, operational hours: 70,000h, with partial wall thickness distribution control PWDS.
Ssojrg
ADS G66C blow molding machine
Capacity: 8,000 bottles / h
Number of slots: 6
Year of production: 1997
Machine with air recovery
Form: 1.5 liters
Number of hours worked: 33,408 h
Included:
- preform basket tipper
- preform feeder
- 800 l air tank
- sterilizing filter
- preform chiller MTA year 2003
The machine is in very good condition, regularly serviced, the machine can be checked in a dry mode.
Btkgldqwbw
Semiautomatic PET Bottle Blow Molding Machine PV-30 is an two-step bottle stretch blowing machine. It has 1 cavity and the capacity range of the products is from 19.0 L to 30.0 L PETor PET KEG, barrels and cans with productivity up to 40 b/h
Be2lvzphfl
Automatic PET Bottle Blow Molding Machine A-3000-4 is an automatic two-step bottle stretch blowing machine. It has 3 cavities and the capacity range of the products is from 0.25L to 2.2 L with productivity up to 4 000 bottles (1.0L) in hour.
Vc2buji
Brand: LOG MACHINE
Jb9slc9dc
Shot weight: 298 g
Screw diameter: 45 mm
Clamping force: 160 ton
Opening stroke: 430 mm
Distance between tie bars: 460x460 mm
Mold thickness: 180-500 mm
screw size:15 mm
injection shot weight in Polysterol:15 g/PS
closing pressure:600 kN
daylight:370 x 370 mm
opening stroke:450 mm
mould height - Max./min.:200 mm
control:Selogica
daylight between platens - max.:650 mm
weight of the machine ca.:3 t
ONLY 2.144 automatic hours
ONLY 4.667 Pump hours
U version II
- wear resistant plastification unit
- with Selogica control with touch screen
- technology stage 2 - wiith 2 regulating pumps
- electrical connection for pneumatic needle valve nozzle 1...
screw size:45 mm
Hmqniob
injection shot weight in Polysterol:149 g/PS
closing pressure:1250 kN
Manufacturer: Arburg
Type: 630S 2500-1300
Control Selogica
Year of manufacture: 2003
Operating hours: approx. 59.000 h
Special features/extras:
Core pull
Bxanlr7cpm
tool heating 6 x
high wear resistant screw
Interface coloring
Handling interface Euromap 67
blow out device 3 x
Conveyor Interface
Various programs:
- ext. monitoring
- advanced movement
- extended locking program
- production control
- order change
- freely configurable side
clamping unit side:
Clamping forc...
Offer-Details:
Stock-No. 13146
Manufacturer Krauss Maffei
Type of machine KM 800 – 6100 MX
Year 2006
Working hours 68000 h
Controlversion MC 5
Screentext German
Location Eschweiler - Germany
Clamping unit:
Clamping force 8000 kN
Mould opening force, max. 560 kN
Travel force movable platen opening 89 kN
Travel force movable platen closing 92 kN
Size of mould platens (h x v) 1600 x 1530 mm
Distance between tie bars (h x v) 1120 x 1000 mm
Mould opening stroke 1600 mm
Mould height min/max 500/11...
Injection moulding machine
Manufacturer: ARBURG
Type: 320 C ALLROUNDER 600-250
Serial number: 193209
Year of manufacture: 2004
Operating voltage: 400 V
Total power: 21,5 kW
Clamping force: 600 kN / 60 tons
Screw diameter: 30 mm
approach force: 35 kN
Opening force/increased: 25/130 kN
opening stroke: 350 mm
Mould installation height: 200 mm
distance between clamping platens: 550 mm
distance between light columns: 320 x 320 mm
mould clamping platens: 446 x 446 mm
Ejector force: max. 30 kN
Ejector ...
Demag Ergotech 500 / 370-80 injection moulding machine
Year of manufacture 2000
Ckrr2qye
Screw 18 mm
screw size:30 mm
injection shot weight in Polysterol:65 g/PS
closing pressure:400 kN
daylight:270 x 270 mm
opening stroke:350 mm
mould height - Max./min.:200 mm
control:Selogica (1. Version)
daylight between platens - max.:550 mm
total power requirement:21 kW
dimensions of the machine ca.:4,30x1,60x2,08 m
few operation hours - condition like new -
- wear reisistant plastification unit
- fully hydraulic clamping unit
- with Vario system
- mould blow unit
- sorter unit
- interface for host co...
screw size:*** mm
injection shot weight in Polysterol:*** g/PS
Brd8iddk
closing pressure:*** kN
screw size 22 mm
moulding weight 33,4 g
closing pressure 200 kN
tie bars distance 254x254 mm
Bd32cnqg3
opening stroke 300 mm
dayligth 125 mm
Dimensions (L/W/H) 2,6x1,1x1,7 mm
total power requirement 9 kW
weight of the machine ca. 2 t
Stock-No. 13142
Manufacturer ENGEL
Type of machine VC 200 – 70 Tech
Year 2004
Working hours 75000 h
Controlversion CC 200
Screentext German
Location Eschweiler - Germany
Clamping unit:
Clamping force 700 kN
Mould opening stroke 456 mm
Hydraulic ejector - stroke 100 mm
Ejector force 39,8 kN
Injection unit:
Screw diameter 25 mm
Injection pressure 2399 bar
Stroke volume 69 ccm
Injection rate 104 ccm/s
O82bno8x
Screw speed 480 1/min
Nozzle pressure 28,3 kN
Electric and Hydraulic Equipment:
No...
screw size:70 mm
clamping force:5.000 kN
screw size:70 mm
max. swept volumne:1.155 cm³
Vudjom
injection pressure:1.480/1.780 bar
screw size:35 mm
max. swept volumne:190 cm³
injection pressure:1.700/2.390 bar
clamping force:500 t
tie bar distance:910 x 830 mm
mould hight min.:350 mm
opening stroke:1.250 mm
microprocessor control:CC200 A02
screen text:deutsch
Manual:deutsch /german
core pull:4 x
Hotrunner:16 x
Motor output:74,0 kW
total connection power:113,4 kW
total weight:25.750 kg
dimensi...
1,0 St. gebr. Spritzgießmaschine
Hersteller: DEMAG
Typ: Ergotech80/420-310System
Baujahr: 2000
Schließkraft: 80 Tonnen
Schnecken DN: 35 mm
Spritzteilgewicht: 151 g / PS
Steuerung: NC4
Ausstattung:
1 x Kernzug
Zr8sesy
Schnittstelle Roboter
Mit Motan Aufsatztrockener
screw size:55 mm
injection shot weight in Polysterol:390 g/PS
closing pressure:1600 kN
daylight:520 x 520 mm
opening stroke:max. 650 mm
Q3v2y9jh
mould height - Max./min.:250 mm
control:Selogica
daylight between platens - max.:max. 900 mm
total power requirement:46,3 kW
weight of the machine ca.:6,7 t
dimensions of the machine ca.:5,40x2,00 x 2,20 m m
CS version IV
- LCD control monitor, colour type
- technology step 2, - servoregulated with 2 regulating pumps
- with Selogica-control
- highl...
screw size:*** mm
injection shot weight in Polysterol:*** g/PS
Pagph
closing pressure:1100 kN
screw size 25 mm
moulding weight 41,8 g
closing pressure 350 kN
tie bars distance 304 x 304 mm
opening stroke 325 mm
dayligth 150 mm
injection pressure 2149 bar
total power requirement 14,5 kW
weight of the machine ca. 2,2 t
Control: Unilog 4000 B
Machine has one pit draw.
belt convoyer
HB-Therm 80°
Serial Nr. A35/04/11/0/05
Oiphs8gvy
Offer-Details:
Stock-No. 13141
Manufacturer ENGEL
Type of machine VC 200 – 70 Tech
Year 2004
Working hours 73000 h
Controlversion CC 200
Screentext German
Location Eschweiler - Germany
Clamping unit:
Clamping force 700 kN
Mould opening stroke 456 mm
Hydraulic ejector - stroke 100 mm
Ejector force 39,8 kN
Injection unit:
Screw diameter 25 mm
Bxbgetf7gr
Injection pressure 2399 bar
Stroke volume 69 ccm
Injection rate 104 ccm/s
Screw speed 480 1/min
Nozzle pressure 28,3 kN
Electric and Hydraul...
Praline forming machine, praline shaper,
-Conveyor belt missing
-Chocolate forming machine
-Execution: stable
-Conveyor belt width: 110 mm
-2x press rollers: Ø 145 mm
-1x molded body: with ejection
-1x machine with shape ellipse: approx. 20 x 35 mm
Rlt00ry
-Transport dimensions: 1540/520/H1420 mm
-Weight: 280 kg
Hersteller: ARBURG
Typ: 320C500-100
Baujahr: 2002
Schließkraft: 50 Tonnen
Bwy2d9gg0s
Schnecken DN: 30 mm
Spritzteilgewicht: 36 g / PS
Steuerung: SELOGICA
Ausstattung:
1 x Kernzug
Schnecke Hochverschleißfest
Euromap 32 - polig
Zylindereinheit bis 450° C
Anschluss Selektiereinheit
screw size:35 mm
injection shot weight in Polysterol:142 g
clamping force:1200 kN
INJECTION UNIT - HORIZONTAL:int. Größe 330
screw size:35 mm
max. swept volumne:154 cm³
injection shot weight in Polysterol:140 g/PS
injection pressure:1.595 bar
INJECTION UNIT - piggyback:int. Größe 80
screw size:22 mm
max. swept volumne:38 cm³
injection shot weight in Polysterol:34 g/PS
injection pressure:1.590 bar
clamping force:120 t
tie bar distance:holmlos mm
plate dimensions -w x h:790 x 680 mm
mould hight m...
screw size:45 mm
Bxdbsjeyr8
injection shot weight in Polysterol:149 g/PS
closing pressure:1250 kN
screw size 40 mm
injection shot weight in Polysterol 182 g/PS
closing pressure 950 kN
mould height - Max./min. 250 - 725 mm
opening stroke 475 mm
Oipksj88c
tool clamping area 640 x 640 mm
420 x 420 mm
Dimensions (L/W/H) 4,3x1,4x2,0 m mm
total power requirement 27,5 kW
weight of the machine ca. t
dimensions of the machine ca. m
CNC Injection Moulding Machine Unilog 4000 Control
with core drawing
with belt convoyer, HB Therm 80°
drying air drier
EXTRAS:
- 2 hydraulic cores,
Njyj9k3t
- 1 needle valve (opening and closing), bimetallic
- Additional stainless steel plate (for small moulds), cost 5.000 EUR
- Productivity software add-on
- :
- Screw diameter: 24 mm
- Shot weight max: 53,2 g
- Injection pressure: 1.913 bar
- Injection volume: 43 cm³
- Screw speed: 250 / 400 rpm
- Screw L/D ratio:
- Nozzle stroke / force max.: 205 / 48 mm / kN
- Ejector stroke / force max.: 80 (130) (150) / 20,4 mm / kN
- Clamping force: 500 kN
- Mould o...
Offer-Details:
Stock-No. 13147
Manufacturer Krauss Maffei
Type of machine KM 800 – 6100 MX
Year 2006
Working hours 68000 h
Controlversion MC 5
Screentext German
Location Eschweiler - Germany
Clamping unit:
Bws7tp9t0v
Clamping force 8000 kN
Mould opening force, max. 560 kN
Travel force movable platen opening 89 kN
Travel force movable platen closing 92 kN
Size of mould platens (h x v) 1600 x 1530 mm
Distance between tie bars (h x v) 1120 x 1000 mm
Mould opening stroke 1600 mm
Mould height min...
1,0 St. gebr. Spritzgießmaschine
Hersteller: ARBURG
Typ: 320C600-100
Baujahr: 2003
Schließkraft: 60 Tonnen
Schnecken DN: 25 mm
Spritzteilgewicht: 44 g / PS
Steuerung: SELOGICA
Ausstattung:
Bwy08trbsa
1 x Kernzug
Integralangußpicker
Förderband im Maschinenbett
screw size:100 mm
injection shot weight in Polysterol:3.574 g
clamping force:13.000 kN
INJECTION UNIT:9200
screw size:100 mm
max. swept volumne:3.927 cm³
injection shot weight in Polysterol:3.574 g/PS
injection pressure:2.352 bar
CLAMPING UNIT:.
closing pressure:1.300 t
tie bar distance:1.600 x 1.250 mm
mould hight - min.:650 mm
mould hight - max.:1.400 mm
opening stroke:2.430 mm
CONTROL:.
microprocessor control:Unilog B4
screen text:deutsch / german
Manual:deutsch / german
EQUIPMENT:.
ro...
screw size:45 mm
injection shot weight in Polysterol:149 g/PS
closing pressure:100 kN
Kaieoz
screw size 50 mm
injection shot weight in Polysterol 200 g/PS
closing pressure 950 kN
mould height - Max./min. 250-700 mm
tool clamping area 590x590 mm
Bfqby2wbc9
380x380 mm
total power requirement 33,2 kW
weight of the machine ca. 4 t
dimensions of the machine ca. 4,3x1,4 m
Serial No: 330077
Used machine in good condition. Available for immediate delivery.
- Clamping force: 1.400 kN
- Screw diameter: 40 mm
Bv2mob8rpo
- Injection pressure: 2.100 bar
- Injection volume: 220 cm³
- Screw L/D ratio: 20
- Mould opening stroke max: 500 mm
- Mould height max: 480 mm
- Mould height min: 240 mm
- Daylight between platens max: 980 mm
- Platen size (h x v): 650 x 650 mm
- Distance between tie-bars (h x v): 430 x 430 mm
- Core pulls: 1
- Power: installed max: 18,5 + 9,60 kW
- Weight: 6.800 kg
...
Used Krauss Maffei KM 50 - 160
Can be inspected
Pkagj
Clamping force 500 kN
clamping platen 540x540
Clear width 321x321
Opening stroke 350
Injection weight 47g 74g 101g
1,0 St. gebr. Spritzgießmaschine
Hersteller: ARBURG
Typ: 270S350-60
Baujahr: 1998
Schließkraft: 35 Tonnen
Schneckendurchmesser: 25 mm
Spritzteilgewicht: 36 g / PS
Bwyz7q8rcr
Steuerung: SELOGICA
Ausstattung:
1 x Kernzug
Angußpicker Hersteller: Eigenbau
Sidel Stretch Blow Moulding Machine
Max. output: 6.000 bottles/hour.
Max. bottle size: 3.000 cc.
Blow stations: 6.
Machine is in very good conditioning and well maintained.
GENERAL INFORMATION
The SBO 6/10 has 6 molds and 10 heating modules.
Willwork with a wide range of bottle sizes and styles from 0.25 to 3 liters.
Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be
supplied to the machine. Separating the bottle manufacturing and preform manufacturing
processes...
screw size:80 mm
Bxbo9easuf
injection shot weight in Polysterol:*** g/PS
closing pressure:4200 kN
screw size 60 mm
injection shot weight in Polysterol 380 g/PS
closing pressure 1600 kN
mould height - Max./min. 300-850 mm
tool clamping area 700x700 mm
450x450 mm
total power requirement 45 kW
weight of the machine ca. 5,7 t
dimensions of the machine ca. 5,5x1,3x2,9 m
Bfqbyse2o8
Serial No: 300137
including Robot and hopper dryer +loader
- Screw diameter: 22 mm
- Shot weight max: 35 g
- Injection rate: 78 cm³/s
- Injection pressure: 2.060 bar
- Injection volume: 38 cm³
- Screw speed: 360 rpm
- Screw L/D ratio: 18,7
- Nozzle stroke / force max.: 28 mm / kN
- Nozzle stroke max: 200 mm
- Clamping force: 500 kN
- Mould opening stroke max: 600 mm
- Mould height min: 200 mm
- Heating zones: 4
- Platen size (h x v): 500 x 350 mm
- Ejector force: 40 kN
- Control: CC200
Bvrqe3szwf
- Oil tank ca...
screw size 35 mm
injection shot weight in Polysterol 140 g/PS
closing pressure 800 kN
stroke 425 mm
height of form 200 mm
plate size 590x590 mm
control Unilog 4000
total power requirement kW
weight of the machine ca. 3900 kg
dimensions of the machine ca. 4,15x1,5x1,95 m
Machine is in very good condition.
Machine has only 31.074 working hours
Ben7nd3xbt
1,0 St. gebr. Spritzgießmaschine
Hersteller: ARBURG
Typ: 270S350-60
Baujahr: 1998
Schließkraft: 35 Tonnen
Schneckendurchmesser: 25 mm
Spritzteilgewicht: 36 g / PS
Steuerung: SELOGICA
Ausstattung:
Gsrjlqgo
1 x Kernzug
Angußpicker Hersteller: Eigenbau
The B 66 is the first of a new generation stretch-blow moulding machines. it is the successful combination of advantages inherent in the proven and refined B60 system and the technology of a new, efficient blow moulding station.
As the first six-mould machine, the B 66, producing 6,600 bottles per hour, has a 10% higher output than comparable machines on the market. This represents a mould-specific rate of 1,100 bottles per station for one-piece soft drink bottles.
Important performance characte...
screw size:45 mm
injection shot weight in Polysterol:*** g/PS
closing pressure:2100 kN
Bxbpaaudqi
> BATTENFELD BA950V / 200V / 125H <
Our vertical injection molding machine cames from a BOSCH development laboratory and was only used for experimental purposes! Only 8000 operating hours!
Special equipment:
Vertical machine, fitted with one horizontal (125er) and one vertical (200er) injection unit! As well two core pulls and a pneumatic safety door.
The injection units are not designed for parallel use!
Either you can use the horizontal injection unit or the vertical injection unit!
To cha...
including Robot and hopper dryer +loader
- Screw diameter: 22 mm
- Clamping force: 1.000 kN
- Shot weight max: 42 g
- Injection rate: 157 cm³/s
- Injection pressure: 2.400 bar
- Injection volume: 46 cm³
- Screw speed: 400 rpm
- Screw L/D ratio: 24,8
- Nozzle stroke / force max.: 225 / 28 mm / kN
- Nozzle stroke max: 225 mm
- Mould opening stroke max: 350 mm
Bvrqfzgksi
- Mould height max: 450 mm
- Mould height min: 150 mm
- Daylight between platens max: 800 mm
- Platen size (h x v): 650 x 600 mm...
candle diameter: 21 mm
candle length: 300 mm
capacity: 1872 Stück/h
heating-up temprerature: 70-120 °C
cycle time: 13 sec
candle material: Paraffin/Stearin
control: Siemens S 5
space requirement of the machine approx.: ca.L:24 xB: 2 xH: 5,2 m
Candle Production Plant / Candle Molding Machine
- This plant is applied for the production of parafin/stearin candles according to the casting process with a high degree of automation.
- Multicoloured candles can be produced and equipped with various mou...