Used Glide Cut System for sale (50,134)

Condition: new, Year of construction: 2017, Spiral conveyor for pellets and granules: For discharging and conveying pellets with a capacity of 600 kg/h and a bulk density of 0.7 t/m³, and filling 4 big bag stations with a safety end discharge. 1 Transitube discharge hopper, type: SC – 200 Capacity: 200 liters Overall height: 1,270 mm Without lid With sturdy grating as grip protection With built-in empty indicator, vibrating rod sensor All parts in contact with the product made of stainless steel 1.4301, glass bead blasted 1 Transitube screw conveyor, type 53 PCR Conveying length: 10 m (+/- €285 per meter) Motor with frequency converter, provided by the customer: 230/400 V, 50 Hz, 1.1 kW, 920 rpm Conveying screw with square profile 7x7 made of stainless steel Flexible outer hose made of food-grade polyamide Inlet flange type SC Ø 150 with blanking lid for emptying and 2 clamping rings R Insertion tube for coarse adjustment of the output Outlet flange type GW Ø 150 with grip protection and 2 clamping rings R Sensor connection type M1SW with built-in vibrating rod as maximum level indicator All sheet metal parts made of stainless steel 1.4301, glass bead blasted 1 transitube® screw conveyor, type: 53 PCR/VA PM Conveying length: 8 m Motor with frequency converter, provided by the customer: 230/400 V, 50 Hz, 1.1 kW, 920 rpm Flexible outer hose made of food-grade polyamide Square screw 7x7 made of stainless steel 4x intermediate outlets type GM DN 150 with clamping ring Pneumatic shut-off valve with safety end discharge Outlet flange type GW DN 150 with clamping ring Flexible hose 2 meters with mounting flange P1SW for connecting to a container All parts in contact with the product made of material: 1.431, glass bead blasted Bdedpozk I Tkefx Ahbei 4 BIG BAG filling frames Consisting of: 1x base frame, open on one side, internal dimensions 1,500 mm x 1,500 mm Including base plates for connecting the stations and prepared for anchoring in the floor 4x support columns 2100 mm (big bag height 1,850 mm) 1x top frame for hanging the bags With hanging hooks for big bags 1,300 x 1,300 and 700 x 1,100 mm Mounting plate, dimensions provided by the customer for push buttons and light column Support columns and frame parts made of stainless steel Filling connection set consisting of: Crossbars for supporting the conveyor with mounting flange P Ø 150 and P1SW Ø 150 for connecting to the conveyor with built-in vibrating rod as full level indicator Bag spout and bag clip for DN 300

Condition: used, mileage: 61,904 km, power: 243 kW (330.39 HP), first registration: 01/2017, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, color: red, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 8,830 mm, total width: 2,550 mm, Equipment: crane, Volvo FMX 330 6x2 Liftable steering axle. Euro 6. Crane: Hiab 144 E-2 PRO Year 2008 2 x hydraulic extension. Rotator + 6th function. Container system: VDL 25,000 kg. Hydraulically folding rear bumper. = Further information = Technical information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/70R22.5; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/70R22.5; Steerable; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Air suspension Weights Unladen weight: 13,150 kg Payload: 14,850 kg GVWR: 28,000 kg Functional Crane: Hiab Maintenance Bjdsy Nyz Hopfx Ahbsdi APK (Technical inspection): valid until 01.2027 Identification Model number: FMX 330 6x2*4 / HIAB CRANE = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) / Wouter Greutink (NL-DE-GB-ES-IT) / Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand Konica Minolta accessory, the “SDD Booklet Trimmer BLT0202” Suitable for various Konica Minolta models, such as the Konica Minolta SD-506 booklet finisher and the current range of machines Includes SquareFold Condition: This listing is for a second-hand unit, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Bedpfey R Nppex Ahbsdi Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, This listing is for the Millipore Elix Essential 10 UV Water Purification System Bdjdpfxoy Iwzze Ahbji The unit is in full working condition and is ready for immediate use Here’s a clear overview of the Milli‑Q Elix Essential 10 UV Water Purification System, a laboratory-grade water purification unit used to produce high-quality pure water Preparing reagents, buffers, and solutions Feeding instruments like autoclaves, washers, and ultrapure water systems General chemical or biological lab work requiring reliable Type 2 water quality

Condition: used, LDS LDS V790-335T Air-Cooled Vibrator with HPA-K CE power amplifier, m+p VibPilot-8, and PC system For sale is a used electrodynamic vibration testing system from Ling Dynamic Systems (LDS). The system is suitable for vibration testing, vibration analysis, environmental simulations, research & development, quality assurance, and industrial load testing. Technical data: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker model: V790-335T Type: Air-Cooled Vibrator Armature diameter: 335 mm Frequency range: DC to 3000 Hz Resonant frequency: approx. 2250 Hz Max. continuous displacement: 50.8 mm pk-pk Bsdpfjy Uigcsx Ahbsdi Max. velocity: 1.5 m/s Sinusoidal force: approx. 6.67 kN peak Random force: approx. 6.67 kN RMS Shock force: approx. 26.69 kN peak Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support approx. 5.52 bar (80 psi) Optional air isolation approx. 5.52 bar (80 psi) Power amplifier: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: HPA-K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting: 400 V Maximum connected load: 9.3 kVA Control / Measurement system: The scope of delivery includes a complete PC workstation with monitor, keyboard, and mouse, as well as m+p international VibPilot-8 measurement and control hardware. Installed software: m+p international VibControl VibRunner Version 2.13.27.7 VibMultiPlot Version 2.13.27.7 GraphPad The combination of LDS shaker, HPA-K power amplifier, m+p VibPilot-8 controller, and PC workstation forms a professional system for vibration and shock testing and applications in research, development, and quality assurance. Equipment: LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE power amplifier m+p VibPilot-8 measurement and control unit PC workstation Monitor Keyboard and mouse Connection cables and accessories as shown in the pictures Condition: Used. Normal signs of wear and storage are present. Optical condition see pictures. Scope of delivery: Scope of delivery as shown in the pictures. All components visible in the pictures and explicitly mentioned are included in the scope of delivery. Transport: Due to its size and weight, collection or shipping via a freight forwarder is recommended. An inspection by appointment is possible. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Bdodsy Hlkbspfx Ahbji Condition – Not operational, out of action 3-4 months.

Condition: used, Year of construction: 2019, operating hours: 100 h, heating capacity: 12 kW (16.32 HP), total width: 700 mm, total length: 1,300 mm, total height: 600 mm, overall weight: 500 kg, Cleaning System Manufacturer: MFP - FTW Bodpfxezbvhfj Ahbedi Type: Conditioning tank - Size 2 Year of manufacture: 2019 Technical data: - Heating capacity: 12 kW - Temperature range: 30 - 90 °C - Dimensions (length/width/height): 1,300 x 700 x 600 mm - Max. load weight (mesh box): 800 kg - Operating hours: approx. 100 h - Overall dimensions: L x W x H 1.5 x 1.5 x 1.5 m - Weight: 500 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2008, Painting System Manufacturer: HEIMER Year of manufacture: 2008 Technical data: - Max. weight per suspension point: 44 kg - Conveyor system (frequency-controlled): 0.6 – 2.0 m/min Bdsdpezbvlwofx Ahbsi - Total chain length: approx. 40,500 mm - Pitch: 270 mm In our assessment, the painting system is in good used condition. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, This listing is for the Pall Allegro 50L Single Use Mixing System. Bedpozc Hw Hsfx Ahbjdi The unit is in full working condition and ready for immediate use This premium single-use mixer features a magnetically driven impeller designed for scalable, low-shear mixing from 2 L to 50 L. It offers an optimized compact footprint perfect for cleanrooms, excellent powder-to-liquid homogenization, and straightforward integration into modern bioprocessing lines. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, Fanuc Type: M-420I A A05B-1040-B201 / R-J3IB A05B-2474-B250 Fanuc robot with control unit Fanuc robot M-420I A The M-420iA series is the latest generation of FANUC Robotics' high-speed family of industrial robots. Based on a simple and reliable design, the M-420iA offers sophisticated motion control and consistent performance with high productivity. The series is supported by an intelligent robot controller. The M-420iA is a four-axis, servo-driven, modular robot designed for high-speed packaging and material handling. M-420iA - 4 axes of motion, 40 kg payload. Programming teach pendant Bdsdpfjzdit Tox Ahbji Large work envelope with a horizontal reach of 1855 mm Repeatability of +/- 0.5 mm at full speed and full payload throughout the entire work envelope. Linear motion speeds up to 4200 mm/s. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Liebisch Constamatic Type: S1000 M-TR Corrosion testing system / Salt spray test chamber Liebisch Constamatic S1000M-TR (4BVL) Professional corrosion testing system for salt spray, condensation, and cyclic climate tests For sale is a used corrosion testing system from the manufacturer Liebisch Labortechnik. The system was developed for corrosion tests under defined environmental conditions and is suitable for quality control, research, development, and material and coating tests. Due to the robust chest design and large test chamber volume, larger components can also be tested. Technical data Manufacturer: Liebisch Labortechnik Type: Constamatic S1000M-TR (4BVL) Device type: Corrosion testing system / Salt spray test chamber Design: Chest design Test chamber volume: 1000 liters Test chamber dimensions (W x D x H): 1435 x 780 x 600 mm External dimensions (W x D x H): 2600 x 1120 x 1255 mm Temperature range, test chamber: Ambient temperature to 50 °C Temperature range, humidifier: Ambient temperature to 70 °C Reservoir for salt solution: 100 liters Power connection: 230 V AC Frequency: 50–60 Hz Current consumption: 12 A Power consumption: approx. 2700 W Bedpfxjzcdyxe Ahbodi Suitable for tests according to DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621-415 ASTM B368 MIL STD 202 F-101D VW PV 1210 as well as other corrosion and cyclic climate tests Equipment Automatic control Salt spray test Condensation test Combined corrosion and cyclic climate tests Temperature control Humidification system Test rack with sample holders Pressure gauge Large reservoir for test solution Gas spring dampers for comfortable lid opening Areas of application Automotive industry Coating and paint testing Material testing Quality assurance Research and development Laboratory and testing technology Weight: 450 kg Condition Used Normal signs of wear and tear Interior with discoloration due to corrosion from previous testing operations Optical condition as shown in the pictures Scope of supply as shown in the pictures Scope of supply 1x Liebisch Constamatic S1000M-TR corrosion testing system Test rack and integrated holders Other accessories as shown in the pictures Inspection and testing on-site are possible by arrangement and are highly recommended. Loading can be organized by arrangement. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, et ETSYSTEM Electronic Load GPIB Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, providing an ideal testing solution for UPS, AVR, and D/A inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series has its own control and display panel, and a 5-status recall/memory, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measuring device test function provides a quick diagnosis of test results for production and QC test throughput. Features Voltage, current, watt, and VA variable display. CC, linear CC, CR, and crest factor mode. Bdsdpfx Aszd Uh Iohboi GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit meter display for voltage, current, watt, and VA. Suitable for sine, square, and step waves. Width 600 mm, height 1506 mm, depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Iridex Type: Iridex OcuLight SLx Laser: IRIDEX Oculight SLx Tri-Mode 810 nm diode laser Description: Designed for longevity, with a thermal management system to enhance laser conversion efficiency and reliability. Improved user interface with conveniently arranged, easy-to-understand controls. Enables easy transport between rooms and offices. The Tri-Mode capability offers three different laser energy delivery modes: CW-Pulse, MicroPulse, and Long-Pulse. An extremely ergonomic user interface, infrared wavelength, and a wide range of delivery systems provide a broad spectrum of treatment options. Well-suited for retinopathy of prematurity and end-stage glaucoma. The CW-Pulse mode delivers energy in single or repetitive exposures. The LongPulse mode delivers laser energy over extended periods. The MicroPulse mode delivers laser energy in a series of short pulses, allowing for fine control of thermal effects. Features: Application area: ophthalmology Amplifier medium: solid-state Ergonomics: table-top device Wavelength: 810 nm Treatment laser power: infrared diode laser 810 nm, 0–3000 mW Target laser power: red diode laser 650–670 nm, 0 to < 1.0 mW Delivery devices: EndoProbe, TruFocus LIO, portable SLAs, DioPexy, G-Probe, Large-Spot SLAs, LIO, and OMAs Exposure durations: CW-Pulse 10-9000 ms, MicroPulse 0.1-1.0 ms, LongPulse 10s-30 min No external air or water cooling required Weight: 6.4 kg Length: 10 mm Width: 30 mm Bodpfx Ahezd Uubsbodi Height: 30 mm Clinical applications: The Oculight SLx laser system can be used to perform retinal photocoagulation and glaucoma procedures. While this infrared laser (810 nm) can be used for conventional photocoagulation, it also offers some unique treatment options, such as: transscleral retinal photocoagulation for retinal tears and detachments, transscleral cyclophotocoagulation for refractory glaucoma, transpupillary thermotherapy photocoagulation for choroidal lesions, and MicroPulse photocoagulation below the threshold for diabetic retinopathy and age-related macular degeneration (AMD). Laser Indirect Ophthalmoscope (LIO) The TruFocus Laser Indirect Ophthalmoscope (LIO) is ideal for patients who are best examined and treated in a supine position. It features a unique optical design that eliminates the need to adjust the laser focus and allows for a wide range of working distances. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2023, SUNHUB – Compact Dispenser Year of manufacture: 10/2023 Condition: good condition, as is, operational Equipment: HEAD SunHub -20-NH-UV-20-N.00 DOSING VALVES Bjdpfx Ahozf H Rdjbedi BP2 5-N-50 – INK PUMP 2.5 kg SCALE ICS06s-6M/f METTLER TOLEDO LABEL PRINTER + CODEBAR SCANNER External Pump 25 kg CONNECTION X-RITE

Condition: used, RMS RMS Electrodynamic Vibration Test System Vibration exciter SW 3006+ Bdjdpfxozd Rvzo Ahbei Power amplifier TGA 1500 Technical data: Sine: 3.7 kN Random: 3.7 kN Shock: 3.7 kN Displacement pk-pk: 26 mm Velocity: 0.9 m/s Acceleration: 80 g Cooling: air-cooled Condition: used Untested! Testing was not possible. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, 3D systems Here, we offer a 3D printer. Solid-State Nd:YVO4 with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr™ coating system: Process: Interchangeable coater Adjustment: Self-leveling and self-correcting Layer thickness: Minimum 0.05mm, Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominally 0.13mm in standard mode Large line detection: Nominally 0.76mm Maximum drawing speed Edge detection: 3.5m/sec Large line detection: 25m/sec Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Size (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Bdjdpozd Tt Ajfx Ahbei Weight packed (without RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Horiba Type: Mexa 7100D Horiba exhaust gas system Mexa 7100D Including JAG-10-000-061 cylinder cart, approx. 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust aftertreatment, evaluation of exhaust aftertreatment systems Modal analysis (dynamic or transient analysis) during non-stationary operating conditions Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 kg Year of manufacture 2016 Bedpfjzdy Rnox Ahbedi Collection from our location Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Bsdpfsynnliox Ahbodi Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high.

Condition: used, operating hours: 926 h, total height: 1,800 mm, total length: 11,250 mm, total width: 900 mm, Year of manufacture: 2012 Colour: Grey Weight: 1.500 kg - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 546324 - Operating hours: 926 - Main motor power [kW]: 7.5 - Max. saw length [mm]: 7209 - Max. saw width [mm]: 300 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 85 Bdodpsyna Ezjfx Ahbji - Input table length [mm]: 7850 - Output table length [mm]: 2400 - Options: Automatic pusher system - Voltage [V]: 400 - Current consumption [A]: 22 - Fuse [A]: 25 - Power [kW]: 11.0 - Transport dimensions: 11250mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 1500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), mileage: 934,865 km, first registration: 02/1984, fuel type: diesel, tire size: 12.00 R20, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, suspension: steel, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 12,000 kg, Equipment: ABS, = Additional Options and Accessories = Bsdpfx Aszin H Uehbodi - Aluminum fuel tank - Radio/cassette player - Sun visor - Analog speedometer = Additional Information = General Information Year of manufacture: 1984 Cab: simple Axle Configuration Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Tire size: 12.00 R20; Max. axle load: 7500 kg; Tire tread depth left: 20%; Tire tread depth right: 20% Rear axle: Tire size: 12.00 R22.5; Max. axle load: 12000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Weights Unladen weight: 7,150 kg Condition Technical condition: very good Optical condition: very good Damage: none

Condition: used, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision, industrial 3D measuring and testing system for in-process and quality control in manufacturing. The Equator 500 is not a conventional coordinate measuring machine, but a comparative measuring system specifically designed for fast, repeatable measurements directly in the production environment. Ideal for serial production, in-process measurements, and automated inspection processes. The device is ideally suited for dimensional, form, and positional tolerance testing of workpieces and can be used to provide feedback to CNC machines. The software starts correctly, system status according to the display: "Started OK" (see photos). Functions & Applications 3D measurement of workpieces Comparative measuring principle (very fast inspection cycles) High repeatability in the µm range Real-time temperature compensation Suitable for shop floor use Automation capable (e.g. robot loading) Ideal for serial, sample, and process control Typical industries: CNC manufacturing Metalworking Automotive / supplier industry Machine and tool building Technical data (manufacturer's data / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: Ø approx. 500 mm Z: approx. 150 mm Measuring principle: Comparative coordinate measuring technology Temperature-compensated measurement Accuracy: Very high repeatability Measuring accuracy in the µm range (application and strategy dependent) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Bsdpfxszix Nms Ahbsdi Operation via PC-based Renishaw software Electrical data Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power consumption: approx. 1 kW Dimensions (approx.) Overall height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.) 130 kg Condition: used Scope of delivery: (See image) Renishaw Equator™ 500 measuring system Controller / Industrial PC Monitor Keyboard and mouse Base frame Accessories as shown in the photos (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Tekol / Trumpf Laser welding system Tekol LAP S4 with TRUMPF TruPulse 44 and TBH GL230 extraction system Description: For sale is a professional Tekol LAP S4 laser welding system with an integrated TRUMPF TruPulse 44 pulsed Nd:YAG laser and TBH GL 230 extraction system. The system is a closed, precision laser welding station for fine, pinpoint and low-distortion welding operations on metal parts. The pulsed laser enables very controlled heat input, clean weld spots and reproducible results. Ideal for precision engineering, toolmaking, repair welding, prototype construction and small series production. Closed protective cabin with safety system, control unit, rotary table and extraction/filter system. Technical data – system Tekol LAP S4 Operating voltage: 400 V ~ N / PE Current type: 3~ 400 V, 50 Hz Rated current: 32 A (approx. 22.5 kVA) Control voltage: 24 V DC Dimensions: Length: approx. 1330 mm, Depth: approx. 1300 mm, Height: approx. 2030 mm Weight: Machine: approx. 800 kg Travel ranges X-axis: approx. 160 mm Y-axis: approx. 100 mm Z-axis: approx. 100 mm Rotary table: 2-stage Technical data – laser TRUMPF TruPulse 44 Laser type: Nd:YAG pulsed laser Wavelength: 1064 nm Max. average power: 42 W Bjdpfx Aszizpcehbedi Min. pulse power: 201 W Max. pulse power: up to 3 kW Pulse duration: 0.2 – 50 ms Max. pulse energy: 30 J Max. pulse frequency: up to 900 Hz Beam parameter product: 16 mm·mrad Technical data – extraction system TBH GL 230 Voltage: 230 V / 50–60 Hz Power: 0.36 kW Air volume flow, free-blowing: approx. 390 m³/h Effective volume flow: approx. 330 m³/h Max. negative pressure: 4000 Pa Sound pressure level: approx. 51 dB(A) Weight: approx. 40 kg Multi-stage filter system: Pre-filter Particle filter Activated carbon filter Weight approx. 900 kg Condition: used Scope of delivery: (See picture) Laser welding system Tekol LAP S4 TRUMPF TruPulse 44 laser unit Extraction system TBH GL 230 Documentation / folders / data storage media Keys and accessories as shown in the photos (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, MDS Type: MDS A220-PD MDS A220-PD Manual Assembly Station The A220-PD assembly system is a stationary manual assembly station for processing press-in components. Intended use: The machine is used for pressing in fastening elements. The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine. The operator then starts the pressing process using a foot switch. The pressing process runs automatically. Fastening elements: Press-in nut, rivet nut, self-piercing nut, press-in pin, punch pin / rivet pin Thread size - M5, M6, M8, M10, M12 Technical data: Control voltage 230V/10A Connection plug HAN 10, not wired Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Treated, water-free, and oil-free air Connection: 1/2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type C-frame A220-PD Continuous sound pressure level (LpA) 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The fastening elements are pressed in automatically. Movements are only initiated when the operator presses the foot pedal, thus triggering the pressing process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Bdedpfszgr I Rox Ahbji Weight: Approx. 600 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filtration units Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled, diode-pumped Nd:YAG laser with Hurryscan 10 – galvo head from Scanlab Fuchs extraction and filtration units TKFD The integrated pre-separator ensures high filter capacity Different filter stages are possible and can be perfectly adapted to individual requirements Ideal for confined spaces – can be placed under a table or integrated into machines Welding fume extraction class W3, IFA certified TKFD can also be transported in the trunk without modification Bdedpfxezdqcuo Ahboi Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Panasonic SUNX Type: LP-431-C Laser Marker Product Features: Class 4 CO2 laser Micro-marking Wavelength: 10.6 microm, 0.417 mil Bjdozdqpzspfx Ahbsdi Laser power, continuous wave: approx. 30 W Speed: 240 m/min or less Weight of marking head: 20 kg Weight of control unit: 12 kg Marking field size with process area cover: 0-55 mm or 0-2.2 inches Permissible ambient temperature: 0 - 40 degrees Celsius Permissible humidity: 35% - 85% Requires 90V to 132VAC, 180V to 264VAC, 50/60Hz Air-cooled Printing options: letters, numbers, katakana, hiragana, kanji, symbols, up to 50 user-defined characters, QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix, and bar codes Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data and specifications!) We will gladly answer any further questions you may have over the phone.