used, good condition
Make Graule
Type ZS 85 N
Motor 2.0 kW 380 V / 16 A
Cutting height approx. 85 mm
Cutting length approx. 380 mm
Blade diameter approx. 300 mm
can be swiveled to the right up to 45 °
swivels left up to 45 °
Btmst7oszu
tiltable up to 45 °
Machine base
Material system made of aluminum
Support table made of delignite wood
Lubricant spray device
both. Pneumatic workpiece clamping 2 pieces
New price approx. € 4,200.00
Extraction connection D 100 mm
Required space approx. 800 mm x 16...
used, good condition
Make Graule
Type ZS 200 / NF
CE-type tested
Motor 5.0 kW
Brake motor
Cutting height approx. 200 mm
Cutting length approx. 420 mm
Blade diameter approx. 520 mm
can be swiveled to the right up to 65 °
can be swiveled to the left up to 45 °
tiltable up to 45 ° with handwheel
Mobile machine base
Roller table right 1500 mm
Btgn0c9kvi
with stop and scale
Roller table left 1500 mm
Material system made of aluminum
Support table made of delignite wood
Extraction connection D 100 mm
R...
used, good condition
Make Graule
Type 85 NS
Year of construction 1995
Machine number 1995 = 5/8
CE-type tested
Motor 2.0 kW / 380 V / 16 A
Brake motor
Cutting height approx. 85 mm
Cutting length approx. 380 mm
Blade diameter approx. 300 mm
can be swiveled to the right by 45 °
swivels left up to 45 °
tiltable up to 45 °
Material system made of aluminum
New price approx. € 3,100.00
Extraction connection D 80 mm
Space requirement approx. 700 mm x 1000 mm x 700 mm
Total connected load approx. 2.0 kW...
used, good condition
Make Graule
Type ZS 85 NS
Year of manufacture 1990
Machine no. 1990/01
Motor 2.2 kW / 380 V / 16 A
Cutting height approx. 85 mm
Cutting length approx. 380 mm
Blade diameter approx. 300 mm
Ebgo20r
can be swiveled to the right by 45 °
swivels left up to 45 °
tiltable up to 45 °
Machine base
Extraction connection D 80 mm
Required space approx. 800 mm x 1000 mm x 1400 mm
Total connected load approx. 2.2 kW
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in t...
RAIMANN cross cut saw, type MaxiCut 700
O7xvl
with in and outfeed transport belt
5 KW
cutting height 200 mm
inclinable up to 60 ° to the left, up to 30 degrees to the right by means of hand crank from the front
Cutting height at 45 ° tilted 140 mm
Cutting width 430 mm Cutting width at 45 ° tilted 290 mm
swivels up to 67 degrees to the left, to the right up to 45 degrees
incl. saw blade for wood
Bcomlrirh0
6.000 mm feed roller conveyor, mounting side left, stop slide can be adjusted from the machine with hand wheel, pneumatically lockable, length can be read off digitally to ...
cutting width max. 590 mm
Ptxljm
Cutting height max. 150 mm
Saw blade diameter 600 mm
Motor output 9,2 kW
solid machine
cutting height approx. 160 mm
C2hab7kc
cutting length approx. 715 mm
Doppelablängsäge Torwegge
Cofywhck
max. Schnittbreite 2200 mm (max. Distanz zwischen den Sägeblättern)
min. Schnittbreite 200 mm
Schnittlänge (Auflagelänge der Holme) 1500 mm
2 Sägeblätter Motorstärke jeweils 3,7 kW
Sägeblatt Durchmesser maximal mit Spaltkeil 350 mm
Schnitthöhe bei Sägeblatt Durchmesser 350 mm maximal 85 mm
Sägeblatt Durchmesser maximal ohne Spaltkeil 450 mm
Schnitthöhe bei Sägeblatt Durchmesser 450 mm maximal 135 mm
Absauganschluss Durchmesser 2 x 120 mm
Verlademaß
L 390...
Technical specifications:
- Motor power 2.2 kW S1
- Max. Saw blade diameter: 350 mm
- Saw blade holder: 30 mm
- Cutting time per stroke: 1.5 sec.
- Speed on the saw shaft: 3800 rpm
- Air consumption per cycle: 5 L
- Working table height: 900 mm
- Extraction nozzle: 2x100 mm
- Operating pressure: 7-8 bar
- Net weight: approx. 200 kg
Bh8mbtlsau
- Required air flow 1000 m³ / h
- Voltage: 400 V / 50 Hz 3-phase
- Cutting capacity in mm: 45 x 230
60 x 210
90 x 180
100 x 125
Standard ...
Double head saw, cross-cut milling machine Baroni
Machine designed to cut on both sides
extended version with the possibility of installing transverse cutters
Bydovmdi
diameter of milling tool 200 mm
motors with power 2 x 1,5 kw, 2800RPM
adjustable cutting angle
pneumatic material pressure
machine dimensions: 250x120x170h cm
ID000557Log feeding table with cross cut saw Vesto- first log feed table length , electric motor 5,5 kW,- second log feed table length , electric motor 5,5 kW,- log buffer- elevator , electric motor 4 kW,- separator- infeed conveyor- feed conveyor with side kickers- operation you need more information about the equipment, please contact our manager.
Bkpoh9n7zk
cutting width max. 250 mm
Cutting height max. 80 mm
Saw blade diameter 400 mm
Motor output 3,0 kW
Nlmnl
Automatic crosscut saw KP 900 Automat is a suitable solution for the preparation of beams and plates in the production of pallets and other wooden packaging products. It was designed to replace a heavy physical work, eliminate operator’s errors, was able to fast change of shortened lengths in a significant variability of orders and could also handle a wide range of input lengths. All this together brings significant material saving, often up to 25% time saving on material processing units and la...
Doppelablängsäge Hüllhorst
Maschinen-Nr. 02456
Type DH 54 S
max. Schnittbreite 2500 mm (max. Distanz zwischen den Sägeblättern)
min. Schnittbreite 220 mm
Schnittlänge (Auflagelänge der Holme) 1800 mm
2 schwenkbare Sägeblätter Motorstärke jeweils 2,2 kW
Schwenkbar beidseitig 45° - 0° - 45°
Sägeblatt Durchmesser maximal mit Spaltkeil 350 mm
Schnitthöhe bei Sägeblatt Durchmesser 350 mm maximal 85 mm
Sägeblatt Durchmesser maximal ohne Spaltkeil 450 mm
Bsi9efxvke
Schnitthöhe bei Sägeblatt Durchmes...
Under-table cross-cut saw UTK-600
** Optionally also available with a pneumatic vertical front protective shield **
Execution according to the new current PLC safety control ltd. Of the new machinery directive
Technical specifications:
- Motor power 7.5 kW S1
- Max. Saw blade diameter: 600 mm
- Saw blade holder: 35 mm
- Cutting time per stroke: 4 sec.
- Speed on the saw shaft: 2800 rpm
- Air consumption per cycle: 20 L
Ootix
- Working table height: 900 mm
- Extraction nozzle: 2x120 mm, 1x100 ...
5 KW, 7,5 PS, mobile on stable swivel castors
cutting height 200 mm
Cutting height at 45° 140 mm
can be swivelled to the left up to 67
can be swivelled to the right up to 45
Cutting length 420 mm at 90° position
Cutting length 45° swivelled - 300 mm
tiltable to the left 60 °, tiltable to the right 30 °
1 piece saw blade 520 x 4,4 x 50 mm 60 WZ neg.
left roller conveyor with scale and stop slide, length 2000 mm to the saw blade
Machine length 4000 mm
1 piece roller conveyor extension with scale a...
ID000704Cross cut saw RandekManufacturer: Randek,Model: 5SM,Blade dimension: 700 you need more information about the equipment, please contact our manager.
Tukjgxkj
cutting width - mm
Cutting height - mm
Saw blade diameter - mm
Kaqtezgp
Motor output - kW
Cross-cut saw KP 500 Automat is a suitable solution for the preparation of beams and plates in the production of pallets and other wooden packaging products. It was designed to replace a heavy physical work, eliminate operator’s errors, was able to fast change of shortened lengths in the significant variability of orders and could also handle a wide range of input lengths. All this together brings significant material saving, often up to 25% time saving on material processing units and last but ...
Doppelablängsäge Torwegge
Yirts
Arbeitsbreite maximal 2500 mm
Arbeitsbreite minimal 250 mm
Schnitthöhe maximal 150 mm
Je Seite 3 Aggregate
Vorritzsäge, Hauptsäge, Profilfräse
Alle Aggregate schwenkbar
Sägeaggregate höhenverstellbar
Motorstärke Vorritzsäge ca. 1,5 kW
Motorstärke Hauptsäge 3,7 kW
Motorstärke Frässpindel 5,5 kW
Frässpindel Aufspannlänge 130 mm
Spindel Durchmesser Fräse 35 mm
Manueller Vorschub
Elektrische Breitenverstellung
Pneumatisches Einspannen der Werkstücke
...
Eisele LMS I cross-cut mitre saw
Type 211
Bjosp7mkuh
Aluminium Saw
380V
Year 1993
rpm 4000
with impact tested
- 3 KW Sawing Motor
- pneumatic sawing
- max. cutting height 150 mm
- max cutting width 445 mm
Xvqq8
- 2 hand operation
- 2 mechnical stops
Used cross cut saw- manufacturer Valmeco,- cross cut saw with table,- cutting height up to 8 cm,- working you need more information about the equipment, please contact our manager.
Bju0frfxsh
cutting width max. 310 mm
Cutting height max. 125 mm
Saw blade diameter 500 mm
Motor output 5,5 kW
Speed 2.800 U/min.
Required air-pressure 6-8 bar
Working height 900 +/- 20 mm
SALVAMAC CLASSIC 50 - The semi-automatic cross-cut saw
----- -
- Structure completely made of lacquered, thick steel profiles, very stable
- Two-hand safety control in ergonomic position
- Cutting speed adjustable by pneumatic trimmer on the machine
- system for compensating the weight of the cutting unit, for a long ...
Code: 0091
Brand: OMGA
Model: T 620 ST - CE Standard
Automatic up-cut cross cut saw for boards, strips, profiles - CE Standard
Composition:
Infeed rollers mm 2000
Motorized exit belt mm 2500
Blade diameter mm 450
Max cutting height mm 120
Bivdg8zyut
Motor power Hp 5.5
Suction port diameter 160 mm
Operating pressure 6-7 atm
Overall dimensions mounted machine mm 5300 x 1100 x 1100 h
Overall dimensions for transport: Roller mm 2000 x 500 x 600 h - Belt mm 2500 x 500 x 600 h - Machine mm 80...
Double cross cut saw Hüllhorst
max. cutting length (max. distance between the sawblades) 3200 mm
Bxuqnnpw
cutting width (length of the sliding bars) 4000 mm
cutting length electric adjustable
sliding bars driving electric forward
2 tiltable sawblades each motor 3,2 kW
2 scroing sawblades each motor 1,1/1,7 kW
3rd sawblade in the table on the left side, with sliding table and adjustable width fence
cutting saw with feeder
cutting h aprox 290 mm
diameter of the blade 750 mm
Blv9hi9u0
-Portal with built-on inclinable circular
saw from the top
-saw blade D = 1000 mm
-traverse path 3500 mm
Ekban79
-electric pivoting arrangement
-electric 400 Volt/50 Hz
-power 8,5 kW
-in the state as it stands 3.800 EUR
Main engine 5,5kW/400V S1
Cutting width max 400mm
Cutting height max 130mm
Brupgdkcff
Weight ca.300 kg
Cross-cut saw notching saw Holzher 1240, in good condition, sawing unit with carbide saw blade, pneumatic via foot switch, folding tables and stop bars, machine from small workshop, little usedFor execution see PDF-file
Ccfi8wma
Duble cross cut saw in good condition
3e7nquk9
Possible to both turn and tilt sawblades up to 45 degrees
Double cross cut saw and groove and tongue machine Schröder
type: PaKue 5
year of manufacture: 1995 CE
Double cross cut, Groove- and tongue routing machine
5 spindles
wood length minimum 200 mm
wood length maximum 1200 mm
wood width maximum 150 mm
wood thickness minimum 6 mm
wood thickness maximum 50 mm
infeed speed adjustable 30 – 120 wood pieces per minute
spindle turning speed 7000 rpm
power 15,8 kW
weight of the machine 2200 kg
weight of the swicht cabinet 100 kg
overall size:
L 2750...
CATALOG NUMBER 5308
TECHNICAL DATA
- max blade diameter 450mm
- 30mm spindle diameter
- hydraulic pressure
- hydraulic disc stroke
- max cutting width 700mm
- cutting height 120mm
- manual control
- 5.5kW main engine
- 1.1kW hydraulic pump motor
- diameter of 80mm discharge pipe, 120mm
- worktop dimensions 880x630mm
Ym82mw2p
- table top height from the 800mm base
- 2 roller tables
- table dimensions 2x2000x710mm
- dimensions of the machine 1800x1400mm
- dimensions length / width / height 4950x1...
Sawmill optimizing cross-cut saw with rollers feeding
Boea02pvtd
Push feed optimizing saw for the complete optimization of the wood and the elimination of the defects.
COSTCUTTING OPTIMIZING SAW
Superpush 200 is a true technological evolution of traditional cutting methods. It is able to increase productivity considerably, reduce staff usage to a minimum, and improve wood yield.
EXTREMELY ROBUST
Very robust and reinforced steel structure.
Special 30° inclined plane to favour the loading and keep the work piece squared.
Pusher carriage dimensions mm. 300x345...
Sell fully functional and complete sawmill Tos Svitavy. Volts price is and ruler + circular-saw blade. Machine is very well - preserved and massive, cast cast - iron weight c. 600 kg.
Information:
Motor input: 3 kW
Bhvr2zrurz
Average reels: 400 mm
Cut: 12 cm
Dimensions machinery: 1500x1580x1250 mm
Width table: 770 mm
Operating voltage: 400 volts
Type MJ640
Motor power 2,2 kW
Blade diameter 300 mm
Motor spindle 25 mm
Max trimming capacity 640 mm
Depth of cut with motor at 45 80 mm
Depth of cut 90 mm
Table size 1020х810 mm
Mus3kw
Saw angle 0 +45 -45
Transport dimensions 1020x1200x1400 mm
Weight 160 kg
Circular Cross Cut Saw REMA -new-
Type DMDK 50C
Pneumatic cross cut saw
Sawblade diameter max. 500 mm
max. cutting height 160 mm
max. cutting width 550 mm
motor 6 kW
spindle turning speed 3000 rpm
spindle diameter 30 mm
Fefuypqik
frequency of operating cycles stepless regulation 0 – 15 cycles/min.
extraction diameter 2 x 125 mm
nominal pressure of compressed air 0,6 Mpa
compressed air requirement 30m³/h
air demand of dust filter system 2600 m³/h
table height 894 mm
2-hand-operation
St...
TROA: CUT TO MEASURE
TROE: DEFECTS ELIMINATION
Work autonomously. Cursal has studied this parting line with the aim of automating all board handling operations including the collection of separator strips.
The TROA-TROE cross-cut saw has been specially designed for parting off twisted and cracked unedged boards.
THE LOWER TOW KNOWS NO INTERRUPTIONS AND HAS A SELF-LIMITED SPEED OF 120 ML/MIN.
(Towing characteristics: 5 rollers with toothed and nitrided sectors; 26 independent upper pressure whe...
Type MJ930
Motor power 2,2 kW
Bgtbawqxwr
Blade diameter 300 mm
Motor spindle 25 mm
Max trimming capacity 930 mm
Depth of cut with motor at 45
Depth of cut 90 mm
Table size 1150х1020 mm
Saw angle 0 +45 -45
Transport dimensions 1500x1100x1450 mm
Weight 180 kg
Cross cut and Mitre saw Graule
type: ZS 85 N-S
year of manufacture: 2016
sawblade diameter 300 mm
sawblade for spindle diam. 30 mm
cutting heigth 85 mm
saw arm for both side mitre cuts 45° slewable
sawblade to one side tiltable 45°
saw motor 2 kW 400/230 V, 5,2/9 Amp., 50 Hz
with roller track right and left each approx. 2 m long
with mobile dust filter
very good condition of all parts
Ojhxv
MAXIMUM SPEED FOR LEADING COMPANIES IN THE WOOD MARKET
We present you the jewel of high speed made by Cursal, TRV 2700EB, where experience, passion and know how are all included.
TRV 2700EB is the perfect solution for the company
– THAT MUST optimize big quantities of timber with varied qualities.
– THAT MUST definitively eliminate the indirect costs, to get a maximum profit from the precious wood raw material.
> Advanced brushless handling systems (blade included) , the maximum quality compon...
THE IDEAL OPTIMIZING SAW FOR SMALL AND MEDIUM SIZES.
U0hrjovq
– Full optimizing with quality defects selection
– Defecting
– Fixed measures sequences.
• Optimized in an ultra – fast and intelligent way, and you will process the most various orders without any stress for the operators. TRV 1200 permits you to cut single rude/painted boards with continuous cycle in a practical and fuctional way.
• Once inserted the cutting lists by the touch-screen (or from the office) and selected the type of ...
HIGH SPEED OPTIMIZATION IN A SAWMILL?
WITH TRV 2000 NOW YOU CAN
TRV 2000, it’s a trimmed/no trimmed boards optimizer, that includes – high precision – big cutting section – working speed.
Available in optimizing version (it uses the Cursal’s tested software used by the other set of optimizing saws) and it is the ideal ally to speed up the work cycle in sawmills.
It optimizes the external side of trunks from the defects – that with traditional machines should not be recovered – in line with t...
ANGLED CUTTING FROM 20° TO 160° FOR SINGLE AND PACKS OF TABLES
Ol8mz
As for the pushing TRSI cut saw, the TRGSI is also structurally a monobloc (speed of installation, anti-vibration system, to cite few of the benefits)
Cutting program for individual boards and packs
• Cutting in fixed sizes – Sequence of measures
• By a CNC industrial computer you can quickly create and store a variety of cutting plans, while working up to 25 different sizes, each with cylinder heads and independent options....
Cursal was born 40 years ago, producing semi-automatic cross-cut saws, projected to select and cut single and packs in small – medium– big sections. Which is the main difference between a semi-automatic and an optimizing cross-cut saw? The difference consists in the cutting impulse that is given from THE USER, and in the other one comes from an internal computer.
Factotum cross-cut saw:
WIDE USAGES. It can do all the semi-worked types of wood and assailable materials such as: window frames, out...
MONOBLOCK INCORPORATED PUSH-SYSTEM: THE MOST SOLD IN EUROPE AND WORLWIDE
AUTOMATIC, CHEAP, SIMPLE AND INTUITIVE TECHNOLOGY (skilled staff is not needed).
Depending on your need, TRSI can be provided for programmed cutting or optimization, and can be used in many SECTORS such as:
> PACKAGING: Cutting to size for single plank or in packages, also perfect for cutting squares.
> DOORS/WINDOWS: Optimizing and selecting qualities and defects.
> FURNITURE: The precision allows it to cut semi-finished...
Crosscut and miter saw, pull saw, miter saw, panel saw, miter saw, radial saw, radial arm saw
-on: stable base
-Motor power: 1.49 kW
-Speed: 3000 rpm
-Saw blade: Ø 250 mm
-Max. Cutting height: 80 mm
-Cutting length: 500 mm
-Saw blade is: tiltable up to 90°
-Dimensions: 840/700/H1390 mm
N0p8z
-Weight: 150 kg
Mobile chop station with extremely robust base, ready assembled and ready for use.
Included special equipment:
- Machine tiltable on both sides from the front
- Circular saw blade HM 520x50 Z60 W neg.
- Undercarriage mobile, especially stable
Data of the machine:
- especially due to constant zero point
good when using measuring equipment
and stop systems (miter and tilt!)
- Powerful three-phase motor 5 kW with automatic
Star-delta starting
- stable guide arm with 4 ball bushings
for preci...
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
How to receive 100% of our e-mails
Sample sales contract for used machines in nine languages
Photo gallery: the 10 strongest forklift trucks in the world
Morlock Motors official partner of Machineseeker and Truckscout24
10 valuable tricks for buying used machines online
