Used Cut Up for sale (34,895)

Condition: excellent (used), HOLZMA HPP 530 PROFI LINE panel saw, in very good condition, with a cutting length of up to 3690. Chodey Uk D Aopfx Ai Roa

Condition: used, The MG TLG single-head up-cut saw is equipped with a Ø 350 mm blade and a rotating table for cuts at 45°, 90°, and intermediate angles. The machine offers a maximum cutting height of 125 mm. Technical Specifications Cjdezcfdxopfx Ai Rjha Blade diameter: 350 mm Table rotation: 45° – 0° – 90° Pneumatic clamps Three-phase motor 220/380 V or single-phase 220 V Motor power: 2 HP (three-phase) / 1.5 HP (single-phase) Cutting speed: 42 m/s Built-in automatic lubrication system Maximum cutting height: 125 mm Movable support turret Dimensions Length: 800 mm Width: 700 mm Height: 1,225 mm Weight: 150 kg

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine Chjdpfx Aev Iccfei Rea • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Codpfx Aow Nac Aei Rsha Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: used, Year of construction: 2015, Swift Cut 3000 W/T Plasma Cutting Machine, 3000mm x 1500mm Cuttting Bed, Hypertherm Powermax 125 Power Source. S/No. 4500318 (2015). Country of Origin: United Kingdom Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Codpfozn Uuisx Ai Reha Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2003, Maximum pushing speed 120 mt/min Blade diameter 500/550 mm Worktop height 900+-20 mm Cedpfjzqg R Iex Ai Rjha Compressed air consumption 1200 nl/min 6 atm Minimum installed power 10 kW Suction air velocity 2000 m3/h 45 mt/sec Output with 8 ejectors

Condition: good (used), Year of construction: 2017, functionality: fully functional, working range: 3,050 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 220 mm, positioning accuracy: 0.015 mm, input voltage: 400 V, table length: 3,050 mm, operating speed: 250 mm/s, table width: 1,525 mm, pressure: 4,137 bar, positioning speed: 15 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, table height: 840 mm, operating pressure: 4,137 bar, input current: 77 A, total height: 1,300 mm, total length: 4,210 mm, total width: 2,130 mm, water pressure: 2.8 bar, pump pressure: 4,137 bar, overall weight: 3,850 kg, working length: 3,050 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, 2017 Swiftcut Swift-Jet CNC Waterjet Cutting Machine – Under 900 Hours Use High-Precision CNC Waterjet Profile Cutter – Low Hours, Good Condition – Now Available at Used Machine Tools Ireland Ltd 🔍 Overview: We are offering this 2017 Swiftcut Swift-Jet Waterjet Cutting Machine, a top-tier solution for high-precision, cold-cutting of a wide range of materials including metal, stone, plastic, glass, and composites. With less than 900 operational hours, this machine is in very good condition and ideal for any business seeking reliable, accurate, and versatile cutting performance. 🛠️ Machine Specifications: Brand: Swiftcut Model: Swift-Jet Year of Manufacture: 2017 Technology: CNC Waterjet Profile Cutting Cutting Area: 3000 x 1500mm Hours Used: Less than 900 hours Pump Type: High-pressure waterjet pump Cutting Method: Abrasive and pure water capability Chsdpfewb D S Hsx Ai Rsa Software: Swiftcut Control Software (user-friendly, intuitive interface) Table Dimensions: 3000 x 1500mm Max Sheet Size: 3050 x 1525mm (10' x 5') Max Traverse Speed: 15m.min Max Z Axis Clearance: 220mm Positional Accuracy: 0.015mm Tank Depth: 840mm Max Pressure: 60,000psi(4137bar) Continuous Pressure: 60,000psi Min. Piercing Pressure: 20,000psi Max Output Flow: 3.8l/min Max Orifice Size: 0.36mm Min Orifice Size: 0.13mm Cutting Water Infeed: 7.6l/min Water Pressure Infeed: 2.8bar Pump Voltage: 400V/77A Pump Power: 37kW/50HP Machine Voltage: 1ph/16A Water Treatment Voltage: 1ph/10A Garnet Hopper Voltage: 1ph/10A Machine Dimensions: 4210 x 2130 x 1740mm Pump Dimensions: 1850 x 920 x 1300mm Machine Weight: 2400kg(empty) Pump Weight: 1450kg 🌟 Key Features: Cold-cutting process – no heat-affected zones, preserving material integrity Precise and clean cuts on a variety of materials and thicknesses Ideal for metal fabrication, signage, engineering, prototyping, and more Compact footprint, easy installation, and low maintenance Exceptional build quality from a trusted UK manufacturer 🔧 Applications: Perfect for cutting: Mild Steel, Stainless Steel, Aluminium Brass, Copper Stone, Granite, Marble Plastic, Acrylic Glass, Rubber, Composite Materials ✅ Why Choose This Swift-Jet? Very low hours – lightly used and well maintained Excellent condition – ready to work immediately Cost-effective alternative to brand new equipment Supported by Swiftcut's strong reputation for service and performance Take advantage of this rare opportunity to own a high-spec waterjet cutting system with low hours – ideal for precision fabrication. Act quickly – this unit won’t last long! Used waterjet cutting machine Ireland, Swiftcut Swift-Jet for sale, CNC waterjet profile cutter, low hours waterjet machine, 2017 Swift-Jet waterjet, metal and stone cutting machine, abrasive waterjet cutter, used CNC cutting machines Ireland, high-precision waterjet cutter, used fabrication equipment for sale Notes: *Specifications are given in good faith but not guaranteed*

Condition: as good as new (ex-display), Swift-Cut CNC plasma cutting machine, type 1250Pro WT with water table and marking unit Cutting area 1250 x 1250 mm with ESAB power source Technical data: - Cutting area for sheet metal formats up to 1250 x 1250 mm - Table dimensions 1980 mm x 1840 mm - Table weight 800 kg - Table capacity 160 l - Height 1500 mm - Z-axis travel 130 mm - Max. load capacity 200 kg/m² - Traverse speed 20 m/min Cedpoy Sxvhofx Ai Rsha - Guides: Hybrid servo motors and double-sealed linear bearings on all axes. - Closed ball screw-driven Z-axis. Double-driven Y-axis. - Bridge clearance 150 mm - Max. material thickness 25 mm - Max. cutting capability for square tubes 100 mm - Required compressed air pressure 7-7.5 bar - Flow rate 300 LPM - Linear positioning accuracy 0.5 mm/m - Repeatability 0.4 mm/m - Measurement of roundness tolerance 0.3 mm/m FURTHER DETAILS AVAILABLE UPON REQUEST.

Condition: good (used), functionality: fully functional, control type: manual, degree of automation: semi-automatic, actuation type: hydraulic, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, The cutting tool can be used with 4 different attachments, with 2 currently in use. Manufactured in Germany. Codpfxezmyyze Ai Rjha

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, Equipment: CE marking, cooling unit, documentation/manual, Fiber Laser Cutting System CUT LITE PENTA, Model LME 3015 Year of manufacture: 2021, CE certified Codpfxeznk Dto Ai Rjha Excellent condition. Cutting dimensions: 3000 x 1500 mm Laser source: IPG YLS 6000 W

Condition: good (used), Year of construction: 2003, fuel type: electric, color: blue, Drive: Wheel Working height: 800 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: IE Please contact Vink Machinery for more information Upright SL20 * 2003 Chedpfx Aisu H Adws Rsa * Electric * 8.1 meter working height * 340 kg lifting capacity * 1400 kg net weight * Extendable platform

Condition: new, Year of construction: 2025, Diameter of saw wheels mm 800 Max. cutting height mm 400 Stationary working table mm 1290 x 800 Max. blade width mm 54 x 0,9 Max. and min. blade length mm 5530 / 5380 Motor power Kw 15 (HP 20) Sawdust hoods nr Nr. 2 Ø 120 Nr. 1 Ø 100 Compressed air consumption (wheels braking and feeder opening) bar 6 Net weight Kg 880 Feeder Height of feeding carpet mm 300 Length of carpet fence mm 750 Idle rollers dia. mm 160 Max. rollers-blade clearance mm 200 Max. fence-blade clearance mm 200 Cjdpfoglfv Dsx Ai Rsha Variable feed speed rate mt/min 0-30

Condition: new, Klanke Supercut roll splitter for efficient shredding of reject rolls. Features: Chjdpsn I Rgpjfx Ai Rea -Automatic safety lock -Emergency stop rip cord -Siemens SPS Technical data: Blade length: 3000mm Cutting channel opening: 1200mm Motor power: 15kW Cutting force: 50to Order goods Price and further information on request. We will be happy to make you a non-binding offer.

Condition: good (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 500 mm, saw blade speed: 2,800 rpm, input voltage: 400 V, rotational speed (max.): 2,800 rpm, saw band length: 500 mm, main saw diameter: 500 mm, saw blade length: 6,000 mm, Double automatic aluminum saw with 500 mm blades. Cuts materials up to 6000 mm in length. Can automatically cut an entire profile into smaller pieces. Length, cutting angle, and material thickness are electronically adjusted on the machine. The saw system is in perfect working order. For sale due to production shutdown. Chodpfx Aiox U Df Hs Rea We are happy to assist with loading the machine onto the buyer's truck.

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 250 Super AutoCut double mitre bandsaw Speed: 18-110 - Mitre left 60° + right 45° - Sliding quick clamping vice - Solid vice + machine casting - Ball bearing rotary table - Hydraulic brake cylinder - Solid, large material support - Automatic cooling system - Worm gear running in oil bath - Closed saw frame - Adjustable ball roller bearings - Tool compartment - door in the base - Cut monitoring by ammeter - Cutting pressure feed regulator - Support roller (infeed side) - Machine base (supplied disassembled) GBS 250 Super AutoCut 3-stage system: I. Automatic lowering of the saw frame via the hydraulic cylinder, infinitely adjustable feed, with limit switch at the end of the cut II. high-speed lowering of the saw frame to the workpiece, then switch to normal saw feed. (e.g. for scribing) III. Hydraulic cylinder works as brake cylinder: a) Manual operation (e.g. for notching) or b) Lowering in idle state Saw blade dimensions: 2765x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Chjdpor Ik Sqefx Ai Rja Delivery time: ex stock Waiblingen Beinstein

Condition: good (used), Eurotecnica 425 CUT Perfect Binder This machine is in perfect technical and visual condition and was used as a backup for the BQ-470 binder. Chedpfozlaa Ssx Ai Rja Machine features: – automatic jaw clamping – disc milling with additional scoring units – infeed jogging device – side gluing – control panel – fume extraction from the gluing unit – trim extraction + external vacuum – automatic cover clamping 230V power supply The kit includes glue to start with.

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 Codpfx Aiedcd Dls Reha fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 99 h, machine/vehicle number: 3105, load capacity: 215 kg, lifting height: 13,500 mm, empty load weight: 3,760 kg, transport length: 4,000 mm, transport width: 1,500 mm, transport height: 2,000 mm, next inspection (TÜV): 10/2026, fuel type: electric, tire condition: 90 %, drive condition: 100 %, color: red, We are offering for sale an articulated boom lift from our machinery park, with a working height of 13.5 meters, which has been regularly maintained. Thanks to continuous and regular maintenance, the machine is in excellent technical condition. The purchase price of the machine includes freshly prepared inspection reports issued in the customer's name, and we also provide detailed information about the condition of the batteries. You can find the precise and detailed specifications of the machine on our website. Chjdpfx Aiszp Hkrs Roa

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Csdpfx Aoziyrpji Roha Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Double-feed detection Weight: 240 kg Power supply: 230 V Made in Japan.

Condition: excellent (used), Year of construction: 2011, Details Manufacturer: Berg & Schmid. Model: GBS250 Super AutoCut. Year of manufacture: 2011. Condition: in excellent working order. Cutting capacity Round materials (90°): Ø 250 mm Square materials (90°): 230 x 230 mm Round materials (45°): ± 210–220 mm Round materials (60°): ± 160–170 mm Saw blade length: ± 3,000 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Cjdpfx Ajy U Dykei Roha Mitre angle & position Left mitre angle: 0–60° Right mitre angle: 0–45° Hydraulic saw arm with adjustable cutting pressure Dimensions Length: approx. 1500 mm. Width: approx. 1700 mm. Height: approx. 1800 mm. Weight: approx. 500 kg.

Year of construction: 1970, condition: used, Cut Tape BRENTA torso 1200 Location Gorzow Wielkopolski. Conditions of delivery Cost of delivery Chsdocudizspfx Ai Rsa Client cover startup type negotiated Description Comments Vertical band saw blade stylitowane carbide wheel diameter 1200 mm, adjustable mechanical feed, feed regulation smoothly on the tape and the wheels flat, cast iron, no need to anchor. Important machine has the ability to cut diameters up to 330 mm, new electrics, a complete ready to go, belt width 200 mm stylit, after pouring rubber on the wheels do not need to regenerate.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, COST-CUTTING OPTIMIZING SAW The Supercut 500 is a high-speed optimizing saw designed to deliver maximum production capacity with outstanding reliability. EXTREMELY ROBUST The machine features a highly robust, reinforced steel frame. The infeed belt conveyor is synchronized and driven by the same motor as the feed rollers. An exclusive system ensures solid double-sided top and bottom traction. The upper feed system includes three hardened, toothed drive rollers and six idle pressure wheels (in three pairs). Each toothed roller's rise and descent are managed by numerical control. TECHNOLOGICALLY INNOVATIVE The electronic system integrates a computer directly connected in real time to a next-generation CNC (numerical control unit). The TROPTIM software runs on Windows and offers full management of up to five wood grades. Equipped with a 22” color LED display, remote internet teleservice, and integrated Excel macros. FAST Chedpfx Aey Iz Hnsi Roa An innovative cutting system achieves such high speed that the blade is almost invisible during operation. Rapid, comprehensive optimization with a compact overall footprint. Feed system equipped with an 18 Nm brushless servo motor. Cutting system uses a 28 Nm brushless servo motor. Saw blade power: 7.5 HP (5.5 kW). Eight idle rollers positioned under the belt of the infeed conveyor. CUTTING DIMENSIONS Cutting section: min. 30x15 mm, max. 220x60 mm. Minimum workpiece length before cutting: 500 mm, maximum: 5000 mm (up to 6000 mm with optional support rollers). Capability for a single cut in the last 190 mm of the board. Suitable for boards of regular profile with a maximum thickness variation of 8 mm. Maximum timber weight: 50 kg.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. Cedpfx Aiey Snwns Roha - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network connectivity Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: new, cutting diameter 255 mm saw band length 2765 x 27 x 0,9 mm Codpfx Aot I D Tuoi Reha table height 950 mm 18-110 m/min 255 mm capacity 90 degrees: square 240 mm capacity 90 degrees: flat 300 x 180 mm capacity 45 degrees: round 210 mm capacity 45 degrees: square 190 mm capacity 45 degrees: flat 200 x 160 mm capacity 60 degrees: round 135 mm capacity 60 degrees: square 110 mm capacity 60 degrees: flat 130 x 100 mm capacity 45 degrees: round rechts 180 mm capacity 45 degrees: square rechts 160 mm capacity 45 degrees: flat rechts 180 x 100 mm 1,5/1,8 kW 350 kg 1700 x 900 x 2000 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV - Current consumption display (saw band wear history, tool monitoring) - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system

Condition: used, Year of construction: 2018, operating hours: 4,500 h, MT Cut UDS1785 Travel distances: X 850 mm Y 520 mm Z 610 mm Tool interface: HSK 63 Chedpfey Ug Epex Ai Rsa Rapid traverse rate X/Y/Z: 32 m/min Tool magazine: 60 positions Machine weight: 6,800 kg Control system: Heidenhain TNC 640 Coolant through tool, 50 bar Spindle speed: max. 12000 rpm Articulated band conveyor, discharge to the left Air through the spindle BLUM A2, laser system for tool measurement Measuring probe: Heidenhain TS 460 Rotoclear, rotating viewing window Emulsion mist extraction, SARA UC2D Year of manufacture: 2018 Spindle operating hours: 4512