Used Meba for sale (38)

Condition: used, Year of construction: 2016, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 325 mm, cutting width (max.): 500 mm, control type: manual, pivoting range: 30 °, actuation type: hydraulic, total height: 1,400 mm, total length: 2,050 mm, total width: 1,300 mm, overall weight: 910 kg, table height: 76 mm, Equipment: CE marking, documentation/manual, Bandsaw machine MEBAswing 320 G-HSS Year of manufacture: 2016 Cutting capacity, round at 90 degrees: Ø 325 mm / at 45 degrees: Ø 300 mm Cutting capacity, flat at 90 degrees: 500 x 300 mm / at 45 degrees: 300 x 300 mm Saw blade speed 15-150 m/min Saw blade dimensions 4200 x 34 x 1.1 mm Connection: 400V 3-phase Total power requirement 3 kW Dimensions L x W x H: 2050 x 1300 x 1400 mm Weight 910 kg Standard equipment: Quick mitre adjustment from 90° to 30° in increments of 0.5° accuracy according to the scale. The mitre pivot point is the intersection between the saw blade and the material support, thus there is no change in the length dimension. At every angle setting of the saw frame, the material is clamped parallel at 90°. Coolant system with electric submersible pump Machine stand with chip collection tray Precise saw blade carbide roller guide, saw blade brush MEBA high-performance package, "HSS" version: Hydraulic raising and lowering of the saw frame and hydraulic clamping of the sawing material. Infinitely adjustable hydraulic cutting pressure and feed rate. Display of lowering speed on a scale. Display of cutting pressure on a manometer. Rapid lowering of the saw frame via push button to the material edge Frequency-controlled AC drive 15-150 m/min, 3 kW Hydraulic raising and lowering of the saw frame Fpjdoz I Ig Nspfx Aiven Including special equipment: Micro-dosing system: Economical and clean sawing: Minimum quantity lubrication with high-performance spray oil for dry chips without droplet formation. Ideal for tubes and profiles. Switching from coolant function to micro-spray nozzle. Compressed air connection required. Laser light for cut line indication/marking saw: Projects the cut line onto the sawing material and indicates the cutting channel. The workpiece can be manually aligned for a saw cut based on the marking. Clamping pressure adjustment at a fixed control panel: The clamping pressure can be manually adjusted via a pressure reducing valve. The applied pressure can be read on the corresponding manometer (in bar). Material stop 0-800mm 3 roller supports 6 new bandsaw blades High-performance spray oil Saw blade brushes

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1100 DG, total length: 2,300 mm, total width: 2,300 mm, total height: 2,300 mm, type of input current: AC, pivoting range: 120 °, input voltage: 400 V, overall weight: 5,400 kg, cutting range round steel at 45°: 510 mm, cutting range round steel at 90°: 510 mm, space requirement height: 2,500 mm, space requirement length: 2,300 mm, space requirement width: 4,400 mm, cutting range square steel at 45°: 700 mm, We are offering this used MEBA MEBASteel 1100 DG double mitre saw, manufactured in 2014. Fpsdpfozx N Tzex Aivon Manufacturer: MEBA Model: MEBASteel 1100 DG Year of manufacture: 2014 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, overall weight: 4,000 kg, Good morning, We have a German-made Meba automatic bandsaw for sale. The machine is in virtually perfect condition. Below is a description of the machine and its features. Designed for fully automatic and efficient production in the steel industry and trade, for cutting solid materials and difficult-to-machine materials. A 2-column automatic machine for cutting at a 90° angle, with a heavy, closed design that dampens vibrations. Minimal space requirement with the highest demands and best cutting results. Technical data: Parameter Round stock Rectangular profile Cutting range: 90° ø 430 mm 430 x 430 mm Maximum machine load: 1000 kg/m Cutting length: * Single stroke: 0 - 600 mm Multiple stroke: 0 - 9999 mm Cutting speed: AC frequency-controlled drive 15–150 m/min, stepless. Adjustable via NC control. Drive power: * Cutting blade: 7.5 kW; 400 V, 50 Hz Hydraulic system: 0.37 kW Coolant pump: 0.37 kW Cutting frame feed: Stepless up to 300 mm/min Cutting blade tension: Hydraulic Cutting blade dimensions: 6220 x 41 x 1.3 mm Length of lead-in (waste): In automatic mode: 25 mm (rectangular material) / 50 mm (round material) Working height: 750 mm (without mounting elements) Weight: 4100 kg Dimensions (L x W x H): 1700 x 3100 x 2350 mm (including chip conveyor) Equipment: -Automatic chip ejector -Chip trolley -Blade break sensor -Blade deviation sensor -Zero face (material positioning) -Interface for importing and exporting data via USB memory -Material database (automatic parameter selection, >500 materials, MEBA blade selection) -Oil mist lubrication -Adjustment of clamping force -Package clamp -Receiving table -Gun for rinsing chips from the machine Fpedpfx Aiszd Ag Sevsn -White color -Status signal column -Central lubrication -Infeed roller conveyor 3000x500 equipped with 9 rollers We are the official distributor of the Meba brand in Poland. The bandsaw has been inspected and found to be ready for further operation for many years to come.

Condition: used, Year of construction: 2014, 35/75 m/min dimensions of saw-band 3350x27x0,9 mm capacity 90 degrees: round 260 mm capacity 90 degrees: flat 300x260 mm capacity 45 degrees: round 200 mm capacity 45 degrees: flat 180x180 mm 130 mm 120x120 mm 25 mm 90 mm min. dia. 5 mm work height max. 750 mm Fpsdoy Ty Eyspfx Aivsn total power requirement 1,1/1,8 kW dimensions 1900x1500x1860 mm weight of the machine ca. 900 kg weight 660 kg

Year of construction: 2020, condition: ready for operation (used), Metal Band Saw manufactured in 2020. This MEBA MEBASwing 320 DG features a robust design suitable for various cutting applications. It operates at a voltage of 400 V and a frequency of 50 Hz, ensuring reliable performance. If you are looking to get high-quality cutting capabilities, consider the MEBA MEBASwing 320 DG machine we have for sale. Contact us for further details. Fpedpfoz Nhyysx Aivon - Current: 16 A- Voltage: 400 V- Frequency: 50 Hz

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total height: 34 mm, total length: 230 mm, total width: 2,400 mm, saw band length: 4,700 mm, saw band width: 1 mm, Selling a MEBAMAT 330 12,500 operating hours The machine has cut 99% of plastic. You can find the machine's technical specifications at MEBA. Fpodpswhix Ejfx Aivsn

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, German band saw MEBA Ratio 300 -Semi-automatic -two-column -cutting diameter 300mm -max dimension 300x500 -floating speed control (inverter) -4800x34x1.1 belt -cooling systems -fast vise clamping -belt cleaning -feed auxiliary roller -feeding table (not in the picture) -German WIKUS cutting belts new 10 pcs (value about 3000 zł) -CE -net price -possible delivery to any place in the country Fpsdeug Hpzspfx Aivon Machine very little used like new from 2021 in perfect technical condition . SPECIALIZATION ( since 1987 on the market! ) METAL saws & Largest selection in the country I have other band saws for metal of all types and bring on individual orders professional equipment from 200mm>1000mm diameter cutting material Automatic / Semi-automatic / Manual NO ! is a "Chinese" like many offered here branded professional machines !!! ONLY PROFII MACHINES !!! BE SURE TO SEE MY OTHER AUCTIONS !!! I SELECT MACHINES W/ INDIVIDUAL NEEDS ! YOU NEED A GOOD MACHINE AT A GOOD PRICE CALL

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, cutting height (max.): 335 mm, cutting width (max.): 500 mm, saw band length: 4,400 mm, saw band speed: 2,500 mm/s, saw band width: 34 mm, TECHNICAL DETAILS Saw blade length: 4,400 x 34 x 1.1 mm Blade speed: 15 - 150 m/min Cutting capacity at 90° (round): 335 mm Cutting capacity at 90° (square): 500 x 335 mm Working height: 750 mm MACHINE DETAILS Motor power: 3 kW Machine weight: approx. 1,020 kg Dimensions: 2,150 x 1,200 x 1,900 mm Fpsdpjzaprnofx Aivjn Control: conventional

Condition: ready for operation (used), Year of construction: 1981, Round cutting area: 170 mm Rectangular cutting area: 170 x 170 mm Saw blade dimensions: 3000 x 25 x 0.9 mm Blade speeds: 150, 355, and 95 m/min Saw drive: 380 V, 0.75 kW Space required: 1400 x 600 x 800 mm Weight: 340 kg Fedowuryropfx Aivopn

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1.1 mm table height 750 mm feed 5.0 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm Fpedpfx Aioulnb Devon capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 mm capacity 30 degrees: flat 170 x 335 mm 15 - 150 m/min workpiece weight max. 250 kg/m 3.0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA

Condition: new, Year of construction: 2025, Technical data: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm • Work table height: 750 mm • Feed range: 5 to 2300 mm per stroke • Cutting area at 90°: flat elements 500 x 335 mm • Cutting range at 45°: approx. 330 mm • Cutting area at 45°: flat elements 320 x 335 mm • Round cut at 45° (left side): 305 mm • Cutting area at 45° (left side): flat 305 x 335 mm • Maximum cutting range at 30°: approx. 180 mm • Cutting area at 30°: flat 170 x 335 mm • Cutting speed: continuously adjustable from 15 to 150 m/min • Maximum load material: 250 kg/m • Total installed power: 3.0 kW • Machine weight: approx. 2550 kg • Required installation space: approx. 4350 x 2300 x 1900 mm Standard equipment MEBAeco 335 DGA-2300: • Access protection in accordance with CE thanks to a light barrier. • Robust, two-column linear construction of the MEBA band saw with automatic material feed system (range 5–2300 mm per stroke). • CNC control for easy program entry and visualization. • Automatic cutting at any angle in the range of 30°–135°, with the possibility of setting the length and number of elements. • Possibility to create and manage up to 255 cutting programs. • Intuitive data entry reduces the risk of operator errors. MEBA High Performance Package: • Saw feed by servo drive and ball screw mechanism with automatic monitoring of cutting pressure and feed. • Constant and optimized working conditions when cutting a variety of materials, including thin-walled profiles. • Precise and fast material positioning by means of AC rack and pinion drive with a stroke length of up to 2300 mm and integrated roller conveyor up to 3000 mm long. Fodpfx Aewf Hm Isivspn • Clamping jaw system that allows opening from both sides, with bars for transporting heavier materials. Design and functionality: • Robust saw frame made of welded vibration-resistant steel. • Saw blade set at a 3° angle to the table for increased efficiency and blade life when cutting steel profiles. • Integrated saw blade guides with precision bearings to minimize band deflection. • Carbide sliding guides for maximum precision. • Point 0 (rotate the miter saw) located at the intersection of the blade with the movable clamping jaw, eliminating the need for length correction when changing the angle. • Automatic programming of angles on the control panel. Vice system: • Patented double angle vice system with automatic adjustment of position to the cutting angle, which ensures a secure and precise grip of the material close to the cutting line. • Clamping performed by full-stroke actuators. Other functions: • Automatic lowering of the saw frame in front of the material when starting the cut, minimizing cycle times. • Optimal conditions for both single and serial cuts. • Infinitely variable band saw drive controlled by an inverter (15–150 m/min). • Precisely pre-machined elements eliminating play.

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Parameters: Cutting diameter: 330 mm Cutting range (90° flat): 350 x 330 mm Saw band length: 4900×34×1.1 mm Cutting speed: 15–150 m/min (adjustable) Fpjdpfx Aex H Ryneiven Max. workpiece weight: 670 kg/m Total power requirement: 3.9 kW Table height: 750 mm Machine weight approx.: 2,600 kg Required space approx.: 1,700×2,400×2,200 mm Equipment: Laser line for cutting indication/marking Cutting process control Material monitoring Material database Feed force adjustment Zero stop Job menu Bundle cutting clamp Vertical roller Double-sided opening / reduced end scrap Operation and Comfort: Swiveling control panel LED work lighting Receiving table Water spray gun Chip and Coolant Management: Screw chip conveyor Micro-dosing Coolant level and flow control

Condition: used, Year of construction: 2007, functionality: fully functional, Meba Band Saw 410 DGA Semi automatic Horizontal Bandsaw – Year 2007. Fpodpfjz Hffyjx Aivjn Cutting range: 90° round: 410; flat: 700 x 400. 5.5 kw.

Condition: new, cutting diameter 240 mm saw band length 2910 x 27 x 0,9 mm cutting width 310 mm table height 900 mm 35 + 75 m/min 1,1/1,8 kW 470 kg 800 x 1720 x 1450 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV - Current consumption display (saw band wear history, tool monitoring) - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut Fsdswa Ui Tepfx Aivjpn system

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Fully functional semi-automatic saw with single-sided miter capability. Fpsdpfx Asz I U Imsivon

Condition: excellent (used), Year of construction: 2011, cutting diameter 400 mm capacity 90 degrees: flat 500 x 400 mm saw band length 6220 x 41 x 1.3 mm speed 15.0 - 150 m/min work height max. 750 mm workpiece weight ca. 250 - 300 kg/m Control MEBA NC coolant tank capacity 80.0 ltr. oil volume 30.0 ltr. power capacity 5.5 kW weight of the machine ca. ca. 2250 kg range L-W-H 3100 x 1620 x 2150 mm Current list price: approx. 50.000 euros Special price available upon request Features: - MEBA - Fully automatic "two-column linear guide system" * Fully automatic machine for 90° cuts only Fpedpfx Aoz Dkzusiven - User-friendly NC dialog control * With plain-text display 5.7-inch CE panel * Program memory with 50 programs, each with 20 steps - Automatic material feed * Minimum cutting diameter .. Ø 5.0 mm * Residual piece length without bundle clamping .. manual 25.0 mm * Residual piece length without bundle clamping .. automatic 110 mm * Automatic movement of the clamping blocks - Rapid-feed lowering of the saw frame * With automatic material detection - Band saw speed via frequency-controlled AC drive (15-150 m/min) - Automatic cutting pressure and feed monitoring - Driven chip-clearing brush via friction wheel - Hydraulic full-stroke material clamping - Saw blade angled 3° relative to the material support surface - Saw blade idler rollers with carbide guides - Manual saw blade tensioning - Removable coolant tank for easy cleaning - Operating instructions

Condition: new, cutting diameter 410 mm saw band length 5800 x 41 x 1,3 mm table height 750 mm capacity 90 degrees: flat 700 x 410 mm capacity 45 degrees: round 410 mm capacity 45 degrees: flat 500 x 410 mm capacity 45 degrees: round links 410 mm capacity 45 degrees: flat links 430 x 410 mm capacity 30 degrees: round 320 capacity 30 degrees: flat 320 x 410 15 - 150 m/min workpiece weight max. 250 kg/m kg 5,5 kW 3200 kg 4500 x 2800 x 2000 mm - The ergonomic panel control can be networked and offers various options Option packages * Teleservice for remote maintenance * Setting sawing programs in the AV * Import of sawing programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs Available in almost all lengths - Exact positioning of the material using servo positioning technology - Pioneering electric saw feed with ball screw: - highest cutting performance and quality, while being gentle on the saw band - Consistent use of the most modern recirculating ball bearing systems: - smooth-running, highly resilient, low-maintenance and play-free - Unique and patented double miter system: Fedpfx Aisx Sr Drevepn - Material is always clamped at right angles Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 5.5 kW - Hydraulic material full stroke clamping - Automatic movement of the vices - Saw frame height adjustment automatically - Minimum speed and saw band monitoring - Electric miter tilting via servo motor - Visualized program input with CNC control - Integrated MEBA pliers insertion system from 5-2300 mm per stroke with integrated roller conveyor *Special equipment: - Laser light for cutting line display/marking saws - Chip brush driven - Micro dosing system - Clamping pressure regulation - Material bundle tension - Job menu - Material database - Zero stop - Scraper belt conveyor for optimal chip disposal, 2000 mm long - Cutting progress control

Condition: good (used), Year of construction: 2014, Cutting range examples: at 90° 260mm round 300x260mm rectangle Fodpfx Aiozrmk Rovopn at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. with the option of hydraulic lifting of the saw frame.

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting height (max.): 260 mm, control type: NC control, overall weight: 1,100 kg, Equipment: lighting, Band saw machine Manufacturer: Meba Type: Meba Profiline 260-AP Year of manufacture: 2004 Control system: Meba Serial number: XXXX Technical data: ----- - Cutting range 90° round: 260 mm - Cutting range 90° rectangular: 300 x 260 mm - Cutting speed: 15 - 150 m/min (AC drive) - Drive, saw band: 1.5 kW - Scrap length, automatic: 90 mm - Scrap length, manual: 10 mm Fpedpfx Aoz Hbgajivon - Cutting pressure: infinitely variable / electric - Saw frame guided twice via linear guides - Material feed via controlled feed clamp ..with hydraulic material full-stroke clamping - Saw band dimensions: 3,350 x 27 x 0.9 mm - Machine weight: approx. 1,100 kg Accessories: ----- - 5x saw band, new

Condition: used, Year of construction: 2008, functionality: fully functional, MEBAeco 335 A Bandsaw Machine Technical Specifications Type: Straight cut 90° Sawing process: NC automatic Automation: Automatic series cutting Cutting range: Round material at 90°: Ø 335 mm Flat material at 90°: 500 × 335 mm Drive power: 3 kW Saw blade: 4400 × 34 × 1.1 mm Maximum load weight: 250 kg/m Year of manufacture: 2008 Fedpezdlx Djfx Aivspn MEBAeco 335 A bandsaw machine, year of manufacture 2008, for automatic series cutting. Cutting capacity up to Ø 335 mm or 500 × 335 mm. Equipped with NC control, 3 kW drive, and saw blade 4400 × 34 × 1.1 mm. Maximum material load 250 kg/m.

Condition: good (used), Year of construction: 2009, machine/vehicle number: 60227, Offer 26293 Hydraulic Horizontal – Two-Column Miter Bandsaw Machine Technical data: - Automatic operation for the cutting process, hydraulic lifting and lowering of the saw frame - Manual miter adjustment to the left and right with clamping Fpjdpfx Aozz Rbleivjn - Saw band dimensions 4400 x 34 x 1.1 mm - Cutting speed, continuously adjustable 15 - 150 m/min - Cutting pressure regulation, continuously adjustable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range: - at 90°: round 335 mm - at 90°: square/rectangular 500 x 335 mm - at 45°: round 330 mm - at 45°: square 320 x 335 mm - at 30°: square 170 x 335 mm - Miter adjustment with digital angle display - Outfeed roller conveyor with dimension stop 6000 mm - Infeed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 1500 x H 1850 x D 2100 mm - Weight approx. 1500 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 230 V, cutting width (max.): 407 mm, total height: 2,000 mm, total length: 1,400 mm, total width: 2,500 mm, empty load weight: 3,500 kg, cutting range round steel at 90°: 407 mm, cutting speed: 300 mm/min, saw band length: 5,120 mm, saw blade length: 5,120 mm, MEBA 407A-OV CNC Horisontal saw Feeder lanes 2005 Year of make Siemens Controller Chip convoyer 5,5 kW 3,5 t L 1,4 x B 2,5 x H 2 m Fpjdpfx Asxz Dkyeivon saw band length: 5120 mm cutting speed: 15 - 150 m/min clamping height: 10 - 407 mm clamping width: 10 - 407 mm cutting range: 407 x 407 mm cutting range round: 407 mm down speed stepless: 0 - 300 mm/min.

Condition: good (used), Year of construction: 2006, cutting diameter 335 mm capacity 90 degrees: flat 500 x 335 mm saw band length 4400 x 34 x 1.1 mm speed 15.0 - 150 m/min work height max. 750 mm workpiece weight 250 kg/m coolant tank capacity 80.0 ltr. oil volume 30.0 ltr. power capacity 5.5 kW weight of the machine ca. 1800 kg range L-W-H 2000 x 2200 x 1900 mm current list price: approx. 45.000 euros Special price available upon request Fpsdszy Sd Eopfx Aivjn Features: - MEBA - Fully automatic "two-column linear guide system" * Fully automatic machine for 90° cuts only - Automatic material feed - Continuously variable lowering speed 0â??300 mm/min - Band saw speed controlled by frequency-regulated AC drive (15â??150 m/min) - Automatic cutting pressure and feed monitoring - Hydraulic full-stroke material clamping - Automatic movement of the clamping blocks - Operatorâ??s manual

Condition: used, Year of construction: 2005, cutting diameter 230 mm cutting speed 35 - 70 m/min cutting width 260 x 200 mm Fpjdpfx Aoy N D Nbeivsn saw band length 2720 x 27 x 0,9 mm total power requirement 1,1 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,8 x 1,8 x 1,6 m

Condition: used, Year of construction: 2008, cutting diameter 335 mm saw band length 4400 mm table height 750 mm 500 mm 335 mm 500 x 335 mm re. 330 li. 305 mm cutting speed re. 320x335 li. 305x335 mm down speed re. 180 mm dimensions of saw-band re. 170 x 335 mm workpiece weight 18 - 115 m/min capacity 90 degrees: round 0 - 300 mm/min. capacity 90 degrees: flat 4400 x 34 x 1,1 mm capacity 45 degrees: round max. 250 kg/m 4,0 kW work height max. 2400 kg connected load 3500 x 2350 x 1900 mm Features: - Material bundle clamping - Automatic feed - Laser light for cut line indication - Micro-dosing device Fpedpjzdu Uzefx Aivsn - Motorized chip brush - Clamping pressure control on the control panel - Fully automatic sawing process after entering the length and quantity - Operating instructions