Used Gildemeister Ctv 160 for sale (241)

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Ppjdpfx Aljwym Nfs Neu Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: excellent (used), CNC Turning-Milling Center Gildemeister CTX gamma 1250 CT, Year 2016 Pictures to follow... Available from March 2027 Base machine: CTX gamma 1250 CT with a turning length of 1250 mm - main spindle as integrated spindle motor, ISM102, drive power 35/45KW (100/40% duty cycle), 4000 rpm - partial hollow clamping device (hydraulic), draw tube inner diameter 104 mm x 848 mm depth - C-axis and spindle brake (hydraulic) - upper cross-slide with turning/milling spindle as motor spindle with hydraulic clamping during turning, HSK-63A DNI 69893 interface - Y-axis ±200 mm - B-axis ±120°, torque motor - disc-type tool magazine with 36 stations - NC tailstock with bearing-mounted, hydraulically movable quill, fixed center - absolute, direct linear measurement systems in X, Y, Z1 axes - coolant pump 6 bar; 20 l/min, plug-in screen filter 10 µm filtration - cooling system for spindle motors, motor console, turning-milling spindle, B-axis torque motor - CNC control with ERGOline operating panel (manufacturer and type per control description) - USB interface, Ethernet interface CNC Control: SIEMENS Sinumerik 840D solutionline with ERGOline Control, SINUMERIK Operate and ShopTurn 3G, Linux OS at no extra cost Tool chain magazine for 120 tools replaces disc-type magazine (36 tools), HSK-A 63 DNI 69893 interface, - only with Siemens control - Mechanical oil mist separator 100 m³/h, filter class H13 Chuck flush device at the main spindle, external, Coolant supply through turning spindle Tropical package for machine environment temperatures up to 40°C, consisting of control cabinet cooling unit (up to 40°C) B-H7080 workpiece touch probe, BLUM, with Quickstart cycle package including probe TC60 with transmitter and receiver unit, HSK 63A tool interface, 1 stylus, measuring cycles B-Z0908 3D data model of the specified machine workspace in Step and IGES format. Delivery of the 3D data model on CD. B-L7000 Standard electrical interface Profibus Handheld control unit: Axes X1Y, 1, Z1, C1, B1, X2, Z2, Z3, C3, C4 can be jogged and moved incrementally using the handwheel. Emergency stop and feed override functions are available on the handset. Tailstock feed force increased to 20kN. SK-2014-3518 The tailstock is supplied without quill bearing to allow fitting of a twist-proof pressure device. When used as a tailstock, a rotating center must be used. Coolant cleaning system: - Filter unit type: FK 20 * Filter performance 20 l/min * Filter medium: filter fleece PN100/100 - Coolant tank 950l type: FKA/950 - Magnetic roller type: MW180 - Process pump 5 bar (50 l/min) - Process pump 20 bar (40 l/min) with DBV 20/40 - Control cabinet Chip conveyor type 300 S-2: - Wear-resistant version (guides and base plates made from XAR) - Return pump 1.2 bar (100 l/min) etc. The full equipment and further technical data can be found in the documentation, which we are happy to provide on request. The machine has always been serviced by Gildemeister customer service and is in technically perfect condition. It can be inspected under power and during production. Dimensions & weight: (LxWxH) Machine CTX Gamma DL 125 – 580x280x285 cm, 20,000 Kg Chip conveyor 670x125x160 cm, 1,000 Kg Total weight incl. accessories 22,605 Kg Number of packages 11 Loading meters: 21 Dismantling, removal, shipping, and reinstallation can be organized. Pjdpfx Aey Axuxel Nopu

Condition: used, Integral automatic loader Pietro Cucchi Ppodpfxoy Exgte Al Nsu Pick-up Pick-up recovery slide Hydraulic unit for pick-up

Condition: good (used), Year of construction: 2006, Control unit MANUAL PLUS 4110 Ppjdpfjx Tg T Rox Al Nsu

Condition: good (used), Year of construction: 2004, functionality: fully functional, Gildemeister GMX 400 Year of manufacture: 2004 Control system: Siemens 840 D Powerline Max. turning diameter: 640 mm Turning length: 1,585 mm Standard turning diameter: 400 mm Control: Sinumerik 840D powerline Siemens Distance between centers: 1,930 mm Main spindle: Type: ISM 90 Max. speed: 4,000 rpm Drive power - main spindle: 36 / 45 kW Max. torque: 600 Nm Spindle diameter front bearing: 150 mm Spindle bore: 107 mm Max. bar diameter: 102 mm C-axis: 0.001° Chuck diameter: 315 (max. 400) mm Milling spindle: Max. speed: 12,000 rpm Drive power - milling spindle: 13.2 / 22 kW Max. torque: 100 Nm Tool holder: HSK-A63 Holding torque: 500 Nm y-axis: +/- 110 mm Pedpfx Aoytpfzel Nopu b-axis: +/- 120° c-axis: 1° x-travel: 550 mm Bearing diameter: 80 / 55 mm Tool magazine: Number of tool slots: 120 positions Tool holder: HSK-A63 Max. tool length: 350 mm Chip conveyor Feeds: Rapid traverse X1/Z1: 40/60 m/min Total power requirement: 70 kVA Machine weight approx.: 20.0 t

Condition: ready for operation (used), Year of construction: 2007, operating hours: 23,567 h, functionality: fully functional, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 678 mm, bar passage: 70 mm, controller model: Fanuc 310i, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X1 travel: 165 mm Y1 travel: 80 mm (+50/-30 mm) Z1 travel: 678 mm X2 travel: 165 mm Z2 travel: 640 mm Main spindle Max. speed: 5,000 rpm Max. bar capacity: 70 mm Draw tube bore: 75 mm Torque: 191 Nm Power: 20 kW Sub-spindle Max. speed: 5,000 rpm Draw tube bore: 42 mm Torque: 108 Nm Power: 17 kW Turret 1 & 2 Tool stations per turret: 12 live Live tools: 4,000 rpm MACHINE DETAILS Control: Fanuc 310i Number of controlled axes: 8 Ppedpfx Alsx Af Dkj Nsu Dimensions & Weight Machine dimensions: 4,400 mm x 2,000 mm x 2,300 mm Machine weight: 8.8 t Chip conveyor weight: 750 kg Operating Hours Automatic mode: 23,567 h Power-on hours: 51,273 h EQUIPMENT Chip conveyor 2 x collet chucks Parts conveyor Extraction unit Bar feeder FMB Turbo 8-80 / 3200

Condition: ready for operation (used), Year of construction: 2005, operating hours: 68,410 h, functionality: fully functional, machine/vehicle number: 4903-0234, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Placing a bid constitutes an obligation to collect the item by the deadline of 15/11/2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2004: Listing ID A20303020 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2007: Listing ID A20303190 Gildemeister GM 42-6, Year 2007: Listing ID A20303265 TECHNICAL SPECIFICATIONS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. bar key width for hexagonal material: 36 mm Max. bar side length for square material: 29 mm Max. bar stroke in one station: 130 mm Max. bar stroke in two stations: 260 mm Max. stroke radial slides: 52 mm Radial slide adjustment, fore/aft: ±20 mm Max. stroke axial slides: 72 mm Max. rapid traverse speed: 9.6 m/min Max. stroke tool spindles: 120 mm Adjustment, fore/aft: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Rated power main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 68,410 h Ppjdpfxexnxnyj Al Nou EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Additional accessories

Condition: ready for operation (used), Year of construction: 2011, operating hours: 40,724 h, functionality: fully functional, machine/vehicle number: 8018030323B, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Submitting a bid obligates you to collect the item on time, no later than 15.11.2025! The following machines are also being sold exclusively via auction at the same location: Gildemeister GM 42-6, year 2005: Search ID A20302860 Gildemeister GM 42-6, year 2004: Search ID A20303020 Gildemeister GM 42-6, year 2007: Search ID A20303190 Gildemeister GM 42-6, year 2005: Search ID A20303220 Gildemeister GM 42-6, year 2007: Search ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of cross slides: 4 Number of tool spindles: 6 Number of tool stations: 12 Max. bar diameter for round stock: 42 mm Max. bar AF for hex stock: 36 mm Max. bar side length for square stock: 29 mm Max. bar feed per station: 130 mm Max. bar feed across two stations: 260 mm Max. radial slide travel: 52 mm Radial slide adjustment, fwd/rev: ±20 mm Max. axial slide travel: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle travel: 120 mm Adjustment, fwd/rev: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Rated power main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 40,724 h Psdpfx Aljxnxkhs Nepu EQUIPMENT Bar feeder (length: approx. 3000 mm) Work tables Additional accessories

Condition: ready for operation (used), Year of construction: 2007, operating hours: 57,860 h, functionality: fully functional, machine/vehicle number: 4903-0261, The submission of a bid obligates the buyer to collect the item by the deadline of 15.11.2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2004: Listing ID A20303020 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2007: Listing ID A20303190 Gildemeister GM 42-6, Year 2005: Listing ID A20303220 TECHNICAL DETAILS Maximum turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of cross slides: 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round stock: 42 mm Max. across flats for hexagonal stock: 36 mm Max. side dimension for square stock: 29 mm Max. bar stroke at one station: 130 mm Max. bar stroke at two stations: 260 mm Max. travel of radial slides: 52 mm Radial slide adjustment, forward/backward: ±20 mm Max. travel of axial slides: 72 mm Max. rapid traverse speed: 9.6 m/min Max. travel of tool spindles: 120 mm Adjustment, forward/backward: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Rated power of main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 57,860 h EQUIPMENT Bar feeder (length: approx. 3,000 mm) Work tables Additional accessories Ppodpfx Alexnxqbo Nju

Condition: ready for operation (used), Year of construction: 2005, operating hours: 69,287 h, functionality: fully functional, machine/vehicle number: 4903-0238, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Placing a bid obligates you to collect the machine by the deadline of 15.11.2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, year 2004: Search ID A20303020 Podpfx Aloxnxapj Njpu Gildemeister GM 42-6, year 2011: Search ID A20303110 Gildemeister GM 42-6, year 2007: Search ID A20303190 Gildemeister GM 42-6, year 2005: Search ID A20303220 Gildemeister GM 42-6, year 2007: Search ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. bar width across flats for hexagon material: 36 mm Max. bar width across flats for square material: 29 mm Max. bar stroke in one station: 130 mm Max. bar stroke in two stations: 260 mm Max. stroke radial slide: 52 mm Radial slide adjustment, fore/aft: ±20 mm Max. stroke axial slide: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle stroke: 120 mm Adjustment, fore/aft: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main Motor Rated power: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 69,287 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Additional accessories

Condition: ready for operation (used), Year of construction: 2004, operating hours: 46,942 h, functionality: fully functional, machine/vehicle number: 4903-0208, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Submission of a bid obligates the buyer to collect the item on time, no later than 15/11/2025! The following machines will also be sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2007: Listing ID A20303190 Gildemeister GM 42-6, Year 2005: Listing ID A20303220 Gildemeister GM 42-6, Year 2007: Listing ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of cross slides: 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round stock: 42 mm Max. across flats for hexagonal stock: 36 mm Max. width for square stock: 29 mm Max. bar feed per station: 130 mm Max. bar feed over two stations: 260 mm Max. radial slide travel: 52 mm Radial slide adjustment, forward/backward: ±20 mm Max. axial slide travel: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle travel: 120 mm Adjustment, forward/backward: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main Motor Main motor rated power: 22 kW Main motor speed: 1,455 rpm Ppodpfoxnxgpox Al Neu Coolant tank capacity: 750 L Operating hours: 46,942 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Additional accessories

Condition: ready for operation (used), Year of construction: 2007, operating hours: 55,585 h, functionality: fully functional, machine/vehicle number: 4903-0266, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Placing a bid obliges you to collect the machine by the deadline of 15.11.2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2004: Listing ID A20303020 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2005: Listing ID A20303220 Gildemeister GM 42-6, Year 2007: Listing ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. bar across flats for hexagonal material: 36 mm Max. bar side length for square material: 29 mm Max. bar stroke at one station: 130 mm Max. bar stroke at two stations: 260 mm Max. radial slide travel: 52 mm Radial slide adjustment, forward/back: ±20 mm Max. axial slide travel: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle stroke: 120 mm Adjustment, forward/back: 10 mm MACHINE DETAILS Dimensions & weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Rated output of main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank volume: 750 L Ppsdpoxnxm Asfx Al Nsu Operating hours: 55,585 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Further accessories

Condition: used, Hydraulically self-centering center, rest, or support – SMW AUTOBLOK Ppodpfoiv Irlex Al Neu Hydraulic center with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Center base: 245 x 240 mm Design: fixed - 3 pieces of roller bearing, Ø 35 mm - Roller width 18 mm - Hydraulically self-centering Dimensions L x W x H: 350 x 250 x 550 mm Weight: 65 kg Good condition

Condition: excellent (used), Year of construction: 2007, CNC Lathe GILDEMEISTER CTX 420 Linear 2007 Siemens 840 D Pjdpfsw Slfbex Al Nspu Technical specifications: * Turning length: 600 mm * Turning diameter: 680 mm * Spindle bore: 79 mm * Spindle speed: 5000 rpm * Spindle power: 25 kW * Chip conveyor: Yes * Variable spindle speed: 5000 rpm Main spindle with bar capacity: Ø 65 mm Self-centering Autoblock chuck: Ø 250 mm

Condition: excellent (used), Year of construction: 2002, CNC Turning-Milling Center GILDEMEISTER TWIN 500 Linear Year of manufacture: 2002 Siemens control system Technical data: Ppodpfx Aow Tarfol Nsu Swing diameter: 610 mm Turning diameter: 610 mm Turning length: 1870 mm Drive power: 69 kW Spindle speed: 3,200 rpm C-axis torque: 650 Nm Main spindle - left Chuck diameter: 250–500 mm Max. bar diameter: 102 mm Upper slide Rapid traverse speed X/Y/Z: 45/24/70 m/min Slide travel X1/Y1605 / 105 mm Turning/milling spindle HSK 63A Max. spindle speed: 12,000 rpm B axis Swivel range B1: 120° Resolution: 0.001° Tool magazine Number of tools: 40 Tool length / Max. quantity: 350/40 mm

Condition: used, CNC control, Numeric Control, from GILDEMEISTER GDM 65/2A GILDEMEISTER type Eltropilot EP20 GD-2A Year of manufacture: 1989 Order number: 150 299 Ppjdpoh Ecnaofx Al Neu Serial number: 0.854.183 Power supply: 220 VAC 50 Hz Rack with 20 module slots - 11 installed modules Dimensions W x H x D: 480 x 260 x 220 mm Weight: approx. 7 kg This control unit comes from a Gildemeister GDM 42/2A lathe. You can find other components from Gildemeister under the following storage numbers: 60343, 60346, 60347

Condition: excellent (used), Hello, I have for sale a DMG GILDEMEISTER CTX 310 V3 CNC LATHE with driven tools. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Ppsdjy Rb H Hjpfx Al Nou Model: CTX 310 V3 Control system: Heidenhain Data Pilot 4290 Country of origin: Germany Year of manufacture: 2003 - Total machine operating hours: 9,144 h Machine specifications: - Turret: 12 tool positions for VDI-30 holders + TurnPlus attachment - Max spindle speed: 5,000 rpm - C-axis - Driven tools - Hydraulic tailstock - Through-spindle - Max turning diameter (X-axis): 190 mm - Max turning length (Z-axis): 455 mm - Cooling system - SMW AutoBlock three-jaw hydraulic chuck - Spindle bore diameter: 50 mm - Chip conveyor - Full programming manual - Mechanical and electrical documentation - Machine weight: 3.8 t - Loading included in the price The machine has undergone a full service inspection. 100% operational. Connected and ready for work. Stal-Com has been engaged in sales, service, and training on DMG group CNC machines for 19 years. We specialize in all models of Gildemeister lathes as well as Deckel Maho machining centers. Every machine undergoes a meticulous technical check. Apart from Polish customers, our machines are also purchased by clients across Europe and parts of Asia. Each machine can be inspected in operation, as we also provide machining services. After purchasing a machine from us, we conduct operator training and can also set up production of parts at the customer's facility. We cooperate on a long-term basis with many companies, supplying them with further machine tools.

Condition: excellent (used), For sale: GILDEMEISTER CTX 410 V3 CNC LATHE with driven tools Podpfoy Rb Ecjx Al Nspu TECHNICAL & VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V3 Control: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2006 The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 positions for VDI-30 tool holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Driven tools - Tailstock - Max turning diameter (X-axis): 320 mm - Max turning length (Z-axis): 600 mm - Coolant system - Hydraulic collet chuck on the main spindle (can be replaced with 3-jaw chuck) - Main spindle with through-hole (bore diameter: 66 mm) - Finished parts catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5 tons - Loading included in the price The machine has undergone a complete inspection. Fully operational and ready to work—currently connected and available for demonstration. About the company: Stal-Com has been trading, servicing, and providing training on DMG Group CNC machines for over 20 years. We specialize in all Gildemeister lathe models and Deckel Maho machining centers. Every machine undergoes a thorough technical inspection. We supply not only customers in Poland, but also across Europe and parts of Asia. Each machine can be inspected live in production, as we also provide subcontract machining services. After purchase, we provide operator training and can help set up production at the customer’s facility. We work with many clients under long-term partnerships, supplying additional machines as needed.

Condition: excellent (used), Year of construction: 1995, Equipment: documentation/manual, FOR SALE: CNC LATHE GILDEMEISTER CTX400 TECHNICAL AND VISUAL CONDITION: Very good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX400 Control: Heidenhain 1190 Country of origin: Germany Year of manufacture: 1995 Machine specifications: - Turret: 12 tool stations, VDI-30 tool holders - Max. spindle speed: 5000 rpm - Hydraulic tailstock - Parts catcher - Max. turning diameter X-axis: 290 mm - Max. turning length Z-axis: 600 mm - Coolant system - Three-jaw hydraulic chuck 200 mm - Spindle bore: 66 mm - Through-spindle - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5.5 tons - Loading onto truck included in the price Psdpoy Rbr Nofx Al Nspu The machine has undergone a full technical inspection. 100% operational. Connected and ready for work. Stal-Com has been selling, servicing, and providing training on CNC machines from the DMG group for 17 years. We specialize in all models of Gildemeister lathes as well as Deckel Maho machining centers. All machines undergo a thorough technical inspection. Besides Polish customers, our machines are purchased by clients throughout Europe and parts of Asia. Each machine can be inspected under power during production, as we also provide machining services. After purchasing a machine from us, we offer operator training and can help set up part production at the customer's site. We work with numerous companies on a long-term basis, supplying them with further machine tools.

Condition: used, Year of construction: 2008, weight of the machine ca. 8,8 t dimensions of the machine ca. 4500x1990x2300 mm Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Pjdpfx Ajyat Hvol Nepu Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm Translated with (free version)

Condition: used, Year of construction: 2007, Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Ppodpfsydfq Ijx Al Nju Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm

Condition: used, Year of construction: 2008, Working area Circulation dia. above bed slide way cover: 680mm Circulation dia. above cross guide cover: 565 mm Facing traverse: 324 mm Longitudinal path: 600 mm Main spindle Spindle nose dia: 170 h5 / 220 h5 mm Bar dia. Max: 65 / 90 mm Spindle nose dia. in front bearing: 120 / 150 mm Spindle boring: 79 / 110 mm Chuck dia: 200 / 250 / 315 mm Drive rating S1 100% duty cycle: 25 / 33 kW Rotational speed range: 5000 / 4000 r.p.m Max. torque S1 100% duty cycle: 270 / 375 Nm Salient rotational speed: 900 / 850 r.p.m C axis (main spindle) Rotational speed: 250 r.p.m Stopping torque: 200 Nm Division accuracy: 0,025 deg. Compound slide X/Z/Y Facing traverse X: 260 / 1852 mm Longitudinal path Z: 635 / 6202 mm Ball spindle Z (dxh): 40x15 mm Vertical path Y: ±40 mm Ball spindle Y (dxh): 40x5 mm Rapid traverse speed X/Y/Z: 60/15/45 m/min Feed force X/Y/Z: 3,5/7/7 kN Tool holder Number of tool stations: 12 Tool mounting cylinder shaft (DIN 69880): 40 mm Tool disk, axial tool holder pitch circle dia: 370 mm Number of driven tools: 12 Drive rating max. 100% duty cycle: 4,9 kW Torque 100% duty cycle: 10,5 Nm Rotational speed range: 4500 r.p.m Tailstock Tailstock traverse path: 580 mm Tailstock force: 8 kN Tailstock mounting: MT 5 Rapid traverse speed Z2: 6 m/min Part accuracy for positioning: =/< 10 mm Hydraulic Contents: 40 l Pump capacity: 2,2 kW Max. pressure: 80 bar Pressure for clamping unit, tailstock: 10-60 bar Coolant unit Contents: 210 l Pump capacity: 1,7 kW Podpfx Aleya Iiro Nopu Feed rate at 6 bar: 20 l/min Electrical energy requirement Connected rating: 50 kVA Operating voltage: 400 V Frequency: 50 Hz Fuses (slow blow/VDE 0100) perm: 80 A Voltage fluctuations at 400 V: 6% - 10% Machine dimensions Dimensions (LxWxH) with chip conveyor: 4350/2460/2080 mm Weight without chip conveyor/chip bath: ca. 6.000 kg Workplace based constant noise pressure level: - (DIN 45635 part 1-04.85 (ISO 3740-1980), measured as a chip removing cycle as per DIN 45635 part 1601-07.78): 77 db (A) - in idle running as per DIN 45635 part 1601-07.78: 78 db (A)

Condition: good (used), Year of construction: 1999, Gildemeister MF Twin 65, year of manufacture 1999, Siemens 840 D control, travel X/Z 190/555 mm, 1 x Y axis +/- 40 mm, 2 turrets with 12 stations each, driven tools, VDI 30 toolholder, C axis, spindle speed up to 6,000 rpm, max. bar passage up to 65 mm, bar feeder is included but is no longer installed on the machine. Pedoyiab Aspfx Al Nspu

Condition: good (used), Year of construction: 2002, Gildemeister NEF 520 K Gildemeister NEF 520 K Cycle-Controlled Lathe with Siemens Sinumerik 810 DL Control, year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Details Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Turning length: 1,250 mm Control: Siemens Simatic Cross slide travel: 260 mm Distance between centers: 1,500 mm Main Spindle: Speed range – main spindle: 8 - 3,000 rpm Drive power – main spindle: 12 kW Ppsdpfew Iqd Ijx Al Nsu Max. torque: 920 Nm Gear stages: 2 Spindle nose: No. 8 DIN55027 Spindle diameter in front bearing: 120 mm Max. bar capacity: 62 mm Spindle mount: ME80 Chuck diameter: 250 mm Tool Turret: Tool system: MultiFIX - C Tailstock: Quill diameter: 80 mm Quill taper: MT 5 Quill stroke: 180 mm Feed Rates: Rapid traverse x/z: 4 / 6 m/min Feed force x/z: 5 / 10 kN Total power requirement: 28 kVA Machine weight approx.: 3.0 t Space requirements approx.: 3.5 x 2.5 x 2.0 m Accessories and Equipment: 1 coolant system About the machine: We are offering a Gildemeister NEF 520 K cycle-controlled lathe, year of manufacture 2012, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Gildemeister operates very quietly. This latest generation of lathes is extremely user-friendly and can produce surface finishes comparable to grinding. Take the opportunity to inspect the machine under power at our premises and see its condition for yourself.

Condition: like new (used), Year of construction: 2001, Gildemeister NEF 320 K Cycle-Controlled Lathe Siemens Sinumerik 810 DL Control Year of Manufacture: 2001 Very Good Original Condition Technical Specifications: Year of manufacture: 2001 Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Centre distance: 750 mm Cross travel: 185 mm Feed X: 4 m/min Feed Y: 4 m/min Rapid traverse X: 8 m/min Rapid traverse Y: 10 m/min Spindle nose DIN 55027 size 6 Spindle bore: 52 mm Drive power (100%): 7 kW Speed range: 14–3550 rpm (2 ranges) Tailstock quill diameter: 70 mm Tailstock quill stroke: 120 mm Tailstock taper: ISO MK 5 Ppodpfx Aswx Rbpsl Nsu Dimensions: 2600 x 1440 x 1440 mm Machine weight approx.: 2.0 t Accessories and Equipment: About the Machine: Offered here is a Gildemeister NEF 320 K cycle-controlled lathe with cycle control, year 2001, in very good original condition. The machine is, of course, fully operational. The slides run very smoothly and evenly. Even at high speeds, the Gildemeister operates very quietly. This latest generation of lathes is very user-friendly and allows for surface finishes similar to grinding. The machine comes from a training workshop of a large industrial company. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.