Used Gildemeister Ctv 160 for sale (223)

Condition: used, Tool presetter GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of construction 2002 Travel distance X-axis approx. 400 mm Travel distance Z-axis approx. 400 mm Tool holder in mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table Ø 340 mm Inner cone in the mounted rotary table Ø 245 mm Tool mounting plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Swivel-mounted flange holder with centering diameter: Ø 102 mm Swivel-mounted flange holder with outer diameter: Ø 155 mm Swivel-mounted flange holder with 3x M10 mounting holes, bolt circle: Ø 130 mm Mains connection 230 Volt, 50 Hz - Microset DPS 100 measuring electronics - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) Kjdpohbal Defx Aa Eenf - Profile projector with screen Ø 100 mm magnification 20x and two circular screens - Fixed focusing screen with crosshairs - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via hand wheels - Rotatable rotary table with pneumatic clamping - Metal substructure with 3 drawers Space requirement L x W x H 1100 x 1000 x 800 mm Weight 400 kg good condition

Condition: good (used), Gildemeister lathe with Heidenhain control system Good condition, fully functional. Can be inspected and tested on site. Shipping also available internationally. Inspection: Knsdpfx Aasxiv Aks Esf Please note that, to avoid misunderstandings, the item can be inspected and tested under power prior to purchase. Please ask any questions before buying to avoid any uncertainties. If you have general questions or wish to arrange an inspection, I am available at the phone number provided below or above at any time. Subject to prior sale and errors in the description. VAT is shown separately on my invoices. Shipping by freight forwarder.

Condition: ready for operation (used), Year of construction: 2005, 1 unit of used CNC lathe with driven tools and Y-axis. Siemens control. Kedpfx Aewz Sgfja Eonf

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 5601-0106, turning length: 320 mm, spindle speed (max.): 10,000 rpm, overall weight: 2,800 kg, bar passage: 33 mm, equipped with Iemca Boss 542 new in 2000 – well tooled – Ge Fanuc 18i-T Control Knsdsxn R N Ajpfx Aa Eof

Condition: used, Year of construction: 2001, operating hours: 43,698 h, turning diameter over cross slide: 570 mm, turning length: 635 mm, turning diameter: 570 mm, spindle bore: 79 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, Equipment: documentation/manual, Turning diameter over bed: 570 mm Turning diameter over cross-slide: 420 mm X travel: 220 mm Z travel: 635 mm Tailstock travel: 550 mm Spindle power output: 21 kW Spindle RPM range: 25-5000 Kodpfx Asxr U Scsa Ejnf C-axis RPM: 100 C-axis increment: 0.04° Number of tool stations: 12 Tool clamping taper: VDI 40 Machine dimensions (LxWxH): 3210x1750x1750 mm Machine total weight: 5300 kg

Condition: good (used), Year of construction: 2007, operating hours: 27,896 h, functionality: fully functional, machine/vehicle number: 2101-0171, turning diameter: 20 mm, rotational speed (max.): 10,000 rpm, torque: 14 Nm, TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Power: 5.5 kW Torque: 14 Nm Rated torque: 9.4 Nm Speed: 10,000 rpm Axis data Linear axis Z1 / X1 / Z1 – travel: 80 / 35 / 240 mm Linear axis Z1 / X1 / Z1 – feed rate (max.): 40 m/min Linear axis Z1 / X1 / Z1 – acceleration (max.): 10 m/s² Linear axis Z1 / X1 / Z1 – nominal force: 1,250 N Linear axis Z2 / X2 – travel: 180 / 230 mm Linear axis Z2 / X2 – feed rate (max.): 40 m/min Linear axis Z2 / X2 – acceleration (max.): 10 m/s² Linear axis Z2 / X2 – nominal force: 1,250 N Tool holder Number of fixed tools (internal): 6 Diameter: 20 mm Number of fixed tools (external): 4 Tool shank size: 12 × 12 mm Number of driven tools: 4 Collet type: ESX 16 MACHINE DETAILS CNC control: Fanuc 16iT Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA Power-on time: 85,620 h Operating hours: 27,896 h EQUIPMENT - CNC control: Fanuc 16iT - Bar feeder FMB Turbo 3-36 / 4200 / A, year of manufacture 2007 - Coolant tank with chip conveyor - Centralized lubrication Kedpfsw Em Dmex Aa Eonf - Handheld control device - Documentation available

Condition: good (used), Year of construction: 2003, Manufacturer: DMG Gildemaster Country of manufacture: Italy CNC control FANUC 16i-TB with 7 axes CE declaration of conformity Technical data Ksdpovvx H Nofx Aa Eenf - Number of axes: 7 - Number of spindles: 2 Travel paths: X1 axis: ±30 mm Z1 axis: 120 mm Y1 axis: 195 mm X2 axis: 30 mm Z2 axis: 180 mm MAIN SPINDLE - Max. bar diameter: 12 (13) [mm] - Travel path: 120 [mm] - Spindle speed: 12000 [rpm] - Spindle drive power: 3.7 [kW] - Torque: 6Nm COUNTER SPINDLE - Max. bar diameter: 12 (13) [mm] - Spindle speed: 12000 [rpm] - Spindle drive power: 3.7 [kW] - Torque: 6Nm Driven tools: Power of the tool drives: 1.1 kW Max. speed: 6,000 rpm Bar loading magazine IEMCA SMART 316 Chip conveyor Machine dimensions: approx. 2043 x 1200 x 1750 [mm] Machine weight: approx. 2200 [kg] Spindle, counter spindle with new bearings!

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning & Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power line Technical Specifications: Ksdpfowzbq Tsx Aa Eonf Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed, driven tools: Number of turret stations: 12 pcs Tool holder: VDI 40 Accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Tailstock function on counter spindle - Automatic sliding doors

Condition: used, Year of construction: 2002, turning diameter 16 mm spindle passage 16 mm turning length 160 mm control GE FANUC Series 18 i-T spindle turning speed range 8000 U/min rapid traverse 30 m/min total power requirement 2,2 kW weight of the machine ca. 2,1 t Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - Knedpfxjvh I Tvj Aa Esf 26 mm and bar lengths 1500 - 3210 mm); chip conveyor, coolant

Condition: excellent (used), Year of construction: 2008, operating hours: 35,598 h, functionality: fully functional, machine/vehicle number: 07400004031, spindle motor power: 20 W, spindle speed (min.): 3,250 rpm, spindle speed (max.): 5,000 rpm, bar passage: 90 mm, overall weight: 10,000 kg, bar capacity 90 mm - 2x12 position driven turrets - Y axis in upper turret - tail stock - Siemens 840D power line Control - machine in perfect condition that has always worked with oli - very very well tooled - Lns Sprint S2 barfeed. Kodpfxeuyx Hzj Aa Eenf

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Hello, I am offering for sale a renowned brand CNC lathe: DMG GILDEMEISTER CTX 420 Linear V4 with C-axis, Y-axis, and driven tools. The machine is in excellent technical and visual condition. _ Type: CNC Lathe Manufacturer: DMG GILDEMEISTER Model: CTX 420 V4 Linear Control: HEIDENHAIN 4290 + DIN PLUS interface for program generation Country of manufacture: Germany Kjdpfx Aajxcupcj Eonf Year of manufacture: 2004 _ Machine specifications: - Turret: 12 tools with VDI 40 holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Y-axis - Driven tools - Max turning length on Z-axis: 635 mm - Max turning diameter on X-axis: 325 mm - Spindle chuck BERG, diameter 200 mm - Max bar diameter: 66 mm - Coolant system - Hydraulic tailstock, programmable - Chip conveyor - Spindle drive power: 21 kW - LNS bar feeder - Documentation (DTR) - Machine weight: 6 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We offer our own stationary and mobile service support - We have sold over 700 DMG machines - We can commission the machine at the customer's site - Operator training and delivery included in the price - All our machines undergo a professional technical inspection and are ready for operation - The machine can be purchased via installment plan or leasing.

Condition: ready for operation (used), Year of construction: 1995, Make: GILDEMEISTER Type of machine: NEF Plus 500 Year of manufacture: 1995 Kjdpfotpn S Isx Aa Esnf Control system: Gründig Machine's weight: 2650 kg Speed range: 8 - 2800 1/ min Cutting diameter: 500 mm Turning length: 1000 mm Overall dimensions: 2500 x 1750 x 1850 mm Spindle opening: 70 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 501628, spindle speed (max.): 4,500 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 280 mm, bar diameter (max.): 65 mm, spindle diameter: 79 mm, Machine package: 2 machines = 1 x functioning machine + 1x spare parts carrier TECHNICAL DETAILS Bar diameter (normal): 65 mm Main spindle Spindle head (flat flange): 140h5 mm Kjdevviwxopfx Aa Eenf Spindle bore diameter: 79 mm Clamping tube diameter: 68 mm Bearing diameter (front bearing): 120 mm Main drive Maximum drive power (40%/100% ED): 28 / 21 kW Speed range: 25 - 4,500 rpm Maximum torque (40%/100% ED): 320 / 240 Nm Path speed for thread cutting (max.): 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Slide 1 Face path/longitudinal path: 155 / 280 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Threaded spindle pitch (X Ø X): 15 x 25 mm Threaded spindle pitch (X Ø Z): 15 x 32 mm Slide 2 Face path/longitudinal path: 82 / 120 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Threaded spindle pitch (X Ø X/Z): 15 x 25 mm Tool carrier Number of tools: 8 Tool holder: Shaft Ø according to DIN 69880 Number of driven tool stations: 4 Power max. (40%/100% ED): 7.6 / 4.6 kW Max. torque (40%/100% ED): 24 / 14.7 Nm Max. speed (tool holder 1 and 2): 4,000 rpm Counter spindle Clamping diameter (with collet): 42 mm Clamping diameter (with 3-jaw chuck): 65 mm Spindle head diameter (flat flange): 120 mm Positioning device: stepless pitch MACHINE DETAILS Total length (with chip conveyor): 3,500 mm Total height (with control cabinet): 1,625 mm Total width (with control cabinet): 1,750 mm Weight of the machine including control cabinet: 5,000 kg Weight of the integrated bar loading magazine: 900 kg Hydraulics Contents: 9.8 l Pump power: 1.1 kW Coolant system Contents: 160 l Pump power: 1.65 kW Discharge rate at 8 bar: 25 l

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: Kjdpfx Aajin Ub Tj Eenf The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Gildemeister SPRINT 65 Linear IRCO Breuning bar feeder Knodpowwa U Ajfx Aa Ejf Chip conveyor High-pressure unit with integrated paper belt filter system and cooling unit Fanuc 310 control Operating hours: approx. 61,550 Production hours: approx. 46,400 The machine can be inspected under power Immediately available

Condition: used, Year of construction: 1985, core drilling diameter max. 18 mm Knjdjt Hwvaopfx Aa Eof bore depth 320 mm swing diameter mm total power requirement 33 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 310 V3 with driven tools, C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control: HEIDENHAIN 4290 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 1999 _ Machine parameters: - head: 12 - tools for VDI 30 holders (Every second socket driven) - max. rpm 6300/min. - max. turning length in the Z axis: 455 mm - max. turning diameter in the X axis: 200 mm - C axis - driven tools - holder on the main spindle: Fi-200mm - max. shaft diameter Fi-51 mm - finished part collector - cooling system Knsdpevmy Icofx Aa Ejf - chip conveyor - spindle drive power: 11 KW - DTR - machine weight: 3.2 tons _ WHY IS IT WORTH BUYING MACHINES in PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Year of construction: 2002, condition: good (used), functionality: fully functional, 3 Main spindle with 70mm bar passage FUNCTIONS The raw bar is machined in spindle 1 and 2 with a 12-position star turret. At the same time, a 2-station front turret can work on this spindle (for drilling or internal boring). After machining, the drum cycles. Knjdpfx Aaon Uum Ho Ejf The pre-turned part is finished in spindle 3 with a 12-position star turret and tapped. The part is then finished in the counter spindle and unloaded by the unloading gripper (monitoring available). The bar is retracted and the drum cycles. TECHNICAL DETAILS Bar passage: 70 mm counter spindle tool turret: 5 pieces, VDI30 (CNC cross slide) High pressure internal cooling: two turrets Measuring system: direct, high resolution in all X-axes Control system: Siemens 840 D Powerline tool monitoring: Artis Collet chuck: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: Roughing of the turned part Tool holder: star turret with 12 positions Other: Possibility for additional work by 2-fold frontal turret Main spindle 2: Finishing of the turned part Tool holder: 12-position star turret Other: Possibility for finishing by 2-fold frontal turret Main spindle 3: Finishing, parting and backworking of the turned part Tool holder: star turret with 12 positions EQUIPMENT Bar feeder for 1500mm long bars

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 40636/0141, spindle motor power: 15,000 W, turning length: 100 mm, spindle speed (max.): 4,988 rpm, spindle speed (min.): 373 rpm, turning diameter: 25 mm, overall weight: 8,100 kg, rotational speed (max.): 4,988 rpm, rotational speed (min.): 373 rpm, type of input current: three-phase, total width: 1,142 mm, total length: 6,500 mm, total height: 2,270 mm, bar diameter (max.): 25 mm, input voltage: 400 V, thread cutting capacity: M 20, clamping diameter: 25 mm, mount diameter: 25 mm, color: grey, coolant pump power: 1,500 W, coolant tank capacity: 700 l, oil tank capacity: 80 l, motor model: INDUKTA Sf160I-4, number of tool turrets: 12, Equipment: bar feeder, centralized greasing system, chip conveyor, documentation/manual, emergency stop, lighting, type plate available, For sale we offer: 1. Gildemeister AS-25 multi-spindle automatic lathes (4 units) 2. 1A-240-6 automatics (4 units) 3. 1A-225-6 multi-spindle automatics (2 units) 4. SECO/WARWICK VRNe-60.100-650-5-ZF nitriding and oxidation furnace (2014). All machines are operational and available for inspection in Krosno (Podkarpackie region). The Gildemeister automatics have been overhauled by FAT PONAR Wrocław. Tooling, machine tools and other equipment are also available. Kodpfx Aaexu Atye Esnf

Year of construction: 1998, condition: ready for operation (used), Base machine CTX 200E with driven tools, C-axis and 1x back working. Includes DATAPILOT software package TurnPlus, cooling unit for control cabinet, hinge belt chip conveyor, discharge height: 1100mm including coolant tank, tool holder set for universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank holders, sealing plugs, reducing sleeves. Bar gripper, axial complete, workpiece pick-up device, tool spindles 3x axial for drilling/milling/tapping, 1x radial for drilling/milling/tapping, 1x for saw blades, collet chuck complete for main spindle, collet chuck complete for counter spindle, 17x DIN collets 173E round Ø 3-40mm, 2x DIN collets 173E, hex SW 7 and 12mm, 2x DIN collets 173E, square SW 8mm. Bar loading magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar loading magazine IEMCA BOSS 542/32, Ø 8-41mm. With complete documentation. The machine has been idle for one year as the turret head is missing, no further defects known, operating hours unknown, without maintenance records. With bar loader and numerous tools. Kedpfxow Tl Ifo Aa Esnf

Condition: used, Multispindle lathe GILDEMEISTER GM 16 AC Knsdpfxswvvrbs Aa Esf

Condition: used, Year of construction: 1991, turning diameter 42 mm turning length 250 mm control total power requirement kW Kjdpet Hwz Ajfx Aa Eonf weight of the machine ca. t dimensions of the machine ca. m CNC-lathe with bar feed with Sameca bar feed

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Hello I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 400 V3 with driven tools and C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 3190 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 2000 _ Machine parameters: Kodpfjtpuh Asx Aa Ejnf - head: 12 - tools for VDI 30 holders (every second socket driven) - max. rpm 5000/min. - max. turning length in the Z axis: 640 mm - max. turning diameter in the X axis: 290 mm - C axis - driven tools - BERG KH 200 spindle holder - max. shaft diameter Fi-65 mm - finished part collector - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Hello I have for sale a renowned brand CNC LATHE DMG GILDEMEISTER CTX 500 V3 with C axis and driven tools. The machine is in very good technical and visual condition. _ Type: CNC Lathe Manufacturer: DMG GILDEMEISTER Model: CTX 500 V3 Control: HEIDENHAIN 3190 + TURN PLUS overlay for generating programs Country of manufacture: Germany Year of manufacture 1998 _ Machine parameters: - head: 12 - tools for VDI 40 holders (every second socket driven) - max. rpm 3500/min. - C axis - driven tools - max. turning length in the Z axis: 1150 mm - max. turning diameter in the X axis: 500 mm - BERG spindle holder Fi-315 mm - max. shaft diameter Fi-91 mm - cooling system - hydraulic tailstock - controlled from the program - chip conveyor - spindle drive power: 31 KW - DTR - machine weight: 9 tons _ WHY IS IT WORTH BUYING MACHINES in PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - ready to work - purchase of the machine is possible through the installment system and leasing. Kedpfxeu Aauxs Aa Esnf

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Hello I have for sale a reputable brand CNC lathe GILDEMEISTER CTX 400 V3 With driven tools and C axis. _ Type: CNC lathe machine Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 1190 + TURN PLUS overlay Kodstw U E Uopfx Aa Eenf Country of manufacture: Germany Year of manufacture: 1997 _ Machine parameters: - head: 12 - tools for VDI 30 toolholders ( every second socket driven ) - max rpm 5000/min. - max length of turning in Z axis: 640 mm - max diameter of turning in X axis: 290 mm - C axis - driven tools - tool measuring probe - spindle holder BERG KH 200 - max. roller diameter Fi-65 mm- finished part pick-up - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM ? - we have our own service _ stationary and mobile - we have already sold more than 700 DMG machines - possibility to start up the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines are after professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing. _ www_ppmsc_en _ Tom_Contact_+48 504 009 641 Paul_Contact_+48 607 305 841