Used Circular saws for light metal and aluminium - automatic for sale (70)

Condition: excellent (used), Year of construction: 2023, saw blade diameter: 460 mm, cutting capacity: 146 mm, total height: 2,000 mm, overall weight: 2,700 kg, space requirement length: 2,200 mm, space requirement width: 1,950 mm, TECHNICAL SPECIFICATION .. max. diameter of saw blade: 460 mm .. cutting capacity round: 146 mm .. cutting capacity square: 138 mm .. mitre cutting: no .. .. oblong: 250 mm .. .. .. x: 100 mm .. .. to: 220 mm/min DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2200 mm .. space requirements -front/back-: 1950 mm .. total height: 2000 mm .. total weight approx.: 2700 kg Cgjb Eyovyzius T Rtjt High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, Emmegi classic magic 500 tu/5 Cjb Ejv Rn Acoy T Rtogt Year 2019 Not used much. Fully functional. Video on request. Machine loaded for 24500 euro.

Condition: good (used), Year of construction: 1987, single saw head, for AL + non-ferrous metals Saw blade size 370 mm, 1700 + 3400 rpm Csb Ejwayzhjy T Rtogt • Feed cylinder with control (pneumatic) and limit switch • Double clamping arm (pneumatic)

Condition: new, MEP COBRA 352 NC 5.0 [Fully automatic] Article number CB352NC 5.0 motor power 2,6/3,5 kW belt opening 180 mm belt dimensions 350x32x3,4 Weight 600 Kg Speed 1700/3400 1/min. Cutting surface 0° 120 / 105 / 180x70 Cgjb Ey Tschkwhe Rtjt Cutting surface 45° right 120 / 100 / 135x60 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Automatic cross-cut saw with semi-automatic function for sawing aluminium and light alloys. Mitre cuts from 45° right to 45° left and saw head can be tilted 0°-45° to the left. It is controlled by multi-microprocessors, while two NC controlled axes allow to program 1000 different cutting programs, each with a different number of pieces and length, for the same material. -New centralized control panel on an articulated arm, so that the machine can be easily operated from any working position and the emergency stop button can be pressed at any time. -Fieldbus communication system with double microprocessor and serial port. -Display with 20 characters x 4 lines for displaying the following technical parameters: Number of cuts programmed and executed, saw band thickness, feed length, cutting time, ammeter, display of over 100 diagnostic messages and warnings. -New - Display and recording of alarm and error messages with the possibility of displaying the incidents that have occurred. New - Material feed of 600 mm with cutting motor and recirculating ball screw mounted on opposite ball bearings.

Condition: reconditioned (used), Year of construction: 2002, cutting height (max.): 100 mm, cutting length (max.): 3,230 mm, power: 21 kW (28.55 HP), cutting width (max.): 3,100 mm, main saw diameter: 450 mm, Machine type: FLM 330-310 / MCS-F Cutting length: 3,230 mm Cutting width: 3,100 mm Year of construction: 2002 Saw blade projection max .: 130 mm Saw blade diameter max .: 450 mm Main saw motor: 21 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Package height max .: 100 mm Package height min .: 10 mm Saw aggregate forward: 0,2 up to 50 m / min Saw aggregate backward: up to 50 m / min Feeder: up to 25 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 8 pcs grip push clamp Clamp opening: 130 mm Strip aligner before and after the pressure beam Air cushion tables: 2 pcs. (2200 x 700 mm) Roller table: Cross aligning device in the roller table Cross alignment stop at the roller table Machine table: heavy-duty steel construction Cgjb Eyjqmn Ahs T Rtot machine table surface is precision machined Brass table lips Automatic cutting length adjustment This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: like new (used), Year of construction: 2016, Functionality: fully functional, saw blade diameter: 500 mm, Fully automatic aluminium crosscut saw AL 500 ANC A fully automatic circular saw designed for cutting profiles and complete materials from aluminium alloys, copper and hard plastics at 90°. The saw feed is controlled pneumatically-hydraulically. The cutting height of the saw blade is adjusted from the main control panel. The saw can easily be connected to an extraction device. The machine is equipped with mist lubrication. The machine is equipped with fixed and movable clamps, their positions are controlled by a ball screw. The length of an individual stroke is 500 mm. The feed length is set from the main control panel on the front of the machine. Main features: Sawing in automatic mode at an angle of 90° Adjustment of the length of cut pieces directly from the control panel Cgjb Eev Rxfbsy T Rtet Up-to-date operation with graphic touchscreen display Micronizer system for oil mist lubrication

Condition: good (used), Year of construction: 2015, Functionality: fully functional, saw blade diameter: 600 mm, cutting range round at 90°: 220 mm, For sale: 1 used CNC fully automatic aluminum circular saw incl. suction unit Manufacturer: Tronzadoras MG Model: GAA-600 - CNC Cgeb Ey Touyyhae Rtot YEAR OF MANUFACTURE: 2015 TECHNICAL DATA - Cutting range round: 220mm, box: 300 x 90mm, square: 175mm - Drive power 4.1 KW / 400 V / 50 Hz - Speed 3000 rpm. - Cutting speed 55 m/sec. - Blade dimensions 600 x 50 mm - max. cutting height 220 mm - Dimension 2020 x 1510 x 975 mm - Weight 650 kg Machine comes incl. 6m infeed roller conveyor and the appropriate extraction system. The saw can be inspected in our warehouse in 09599 Freiberg.

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, overall weight: 580 kg, Precision aluminum circular sawing machine VELOX 350 VA-MPS fully automatic hydropneumatic machine For saw blades up to 350 mm Ø, miter left + right 45° and bevel cuts up to 45° left + right. Cutting range: - 90° 120mm round, 105mm square, 200x80mm flat - 45°L 65mm round, 60mm square, 180x50mm flat - 45°R115mm round, 100mm square, 150x80mm flat Standard equipment: - State-of-the-art micro-processor control with multifunctional display - Safety package with the following functions: 1. minimum input pressure monitoring 2. vice monitoring/material clamping - Hydro-pneumatic control of the saw head - Pneumatic double clamping device - Pneumatic vertical clamping device - Electro-pneumatic material feed unit - Nonius for fine length adjustment - Integrated coolant spraying device - Connecting piece for chip extraction system Cgjb Eorpiu Djy T Rtot Speed 3600 min-1

Condition: used, Year of construction: 2013, Functionality: fully functional, rotational speed (min.): 800 rpm, rotational speed (max.): 4,200 rpm, CNC – High-Performance Aluminum Circular Saw with Chain Magazine Model: VAL 350 NC1 Year of Manufacture: 2013 Control System: Siemens OP277 - Automatic monitoring of the functional sequence with shutdown in the event of a malfunction - Automatic material feed up to 1000mm in one stroke - Positioning accuracy +/- 0.1mm - Cutting length: 10mm to 999mm Csb Eewbalioy T Rtegt - Cutting gap extension - Controlled zero edge Technical Specifications: - Speed 800 – 4200 rpm, continuously variable - Saw feed 0-40 mm/s, continuously variable - Feed speed max. 800 mm/s - Drive 15 kW - Main machine weight 1,850kg - Saw blade diameter = 350mm (max. 400mm), width 2.2 – 3.6mm Feed magazine with 17 compartments for 6m lengths 3 connections for chip Extraction system Fully functional, in good overall condition. Includes complete documentation with drawings, spare parts lists, and instructions. Currently still installed, can be inspected and tested under power.

Condition: good (used), Functionality: fully functional, saw blade diameter: 320 mm, SATURNE CIRCULAR SAW MACHINE 380 V Cgjb Ey T Retu T Ngetst Saw blade 300-320mm Maximum Cutting Length 1,000mm Maximum Saw diameter 60mm Machine is working and has been tested. H 165 x W 150 x L 270 cm Can be loaded

Condition: good (used), Brand: SOLING Model: SCR 125 Tipo: Automatic hydraulic shear Maximum cutting diamante: 20 mm Minimum cutting diameter: 6 mm Ceb Ey Tokwdfqs Rtsgt Bar loader up to : 6500 mm Maximum cutting length: 1.000 mm Minimum cutting length : 180 mm Components Automatic bar loader Hydraulic cutting head Electric desk Adjustable cutting length stop User manual

Year of construction: 2001, Condition: good (used), machine/vehicle number: 129603-40-6, Technical data: -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm - or square-80 mm Cgeb Ey Tod Aai Tj Rtet -Pneumatic chucks -Material supplies automatic position control -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

Condition: new, saw blade diameter 130 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 120 mm capacity 90 degrees: flat 180 x 100 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 100 mm capacity 45 degrees: flat 120 x 100 mm engine 3,3 / 4,4 KW 0 1400 / 2800 U/min weight of the machine ca. 1060 kg dimensions 2,5 x 1,8 x 1,85 m TIGER 402 CNC HR, automatische elektromechanische Vertikalkreissäge für den Einsatz von Hartmetall – Sägeblättern, um Serienschnitte von 45° rechts bis Csb Ey Tohpktyj Rtjgt 60° links auszuführen.

Condition: new, STOCK MACHINE -- Fully automatic aluminum circular saw 90° cut With simple, safe operation and excellent cutting performance. Only 90° cuts are possible with this machine! Technical data: ● Cutting range: 90° round: 100 mm / square: 100 x 100 mm / rectangular: 170 x 60 mm ● Drive power: 1.9 kW / 400 V / 50 Hz ● Speed: 3000 rpm. ● Feed: single feed 300 mm (double stroke up to 600 mm) ● max. cutting height: 100 mm ● Blade dimensions: 350 x 32 mm Cgjb Eyevurgyj T Rtet Basic equipment: ● 90° cutting machine, with powerful drive motor ● Clear, large control panel ● Adjustment of the cutting length from 5 to 300 mm using the handwheel and counter ● Main vice with 3 pneumatic clamping cylinders, 1 horizontal, 2 vertical! ● Feed vice with horizontal and vertical pneumatic clamping cylinders! ● Large protective hood, covers the entire work area, is raised pneumatically ● Cutting and feed speed adjustable ● Air gun for cleaning the machine ● Connections for extraction system ● Minimal lubrication system

Condition: reconditioned (used), Year of construction: 1997, Functionality: fully functional, cutting height (max.): 100 mm, cutting length (max.): 4,230 mm, power: 21 kW (28.55 HP), cutting width (max.): 4,100 mm, main saw diameter: 450 mm, Machine type: FLM 430-410 / WinCommander 4 / non-ferrous metals Cutting length: 4,230 mm Cutting width: 4,100 mm Year of construction: 1997 Saw blade projection max .: 130 mm Saw blade diameter max .: 450 mm Main saw motor: 21 kW Package height max .: 100 mm Saw aggregate forward: 0,2 up to 50 m / min Saw aggregate backward: up to 50 m / min Feeder: up to 32 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 9 pcs grip push clamp Clamp opening: 130 mm Strip aligner before and after the pressure beam Air cushion tables: 3 pcs. (1800 x 600 mm) Roller table: Cross aligning device in the roller table Cross alignment stop at the roller table Machine table: heavy-duty steel construction machine table surface is precision machined Brass table lips Automatic cutting length adjustment This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Cgeb Ey Tjrwmyle Rtst Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm Csb Eyedzp T Dj T Rtegt weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: new, Automatic mitre saw UK-450 - Saw blade diameter 450mm - Machining length according to customer requirements - autom. positioning - automatic mitre adjustment (up to +/- 60°) - Range of application: Wood, plastic and aluminium processing Cgsb Ey Tsd Rhzxe Rtot - Feed conveyor as smooth conveyor (optionally as roller conveyor) Further technical details and details on request.

Year of construction: 2002, Condition: good (used), MEP CONDOR 90 CNC MR automatic disc cutting machine for aluminum profiles with control, feed . Used in very good condition Cgsb Eyoikztps T Rtjt

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm Cgsb Ejd Iinzoy T Rtot capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Hydro-pneumatic control of the saw head · Pneumatic double clamping device · Pneumatic vertical clamping device · Electro-pneumatic material feed unit with material hold-down device · Vernier for length adjustment · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Leftover piece length in automatic mode 210 mm MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator

Condition: new, IN STOCK -- Fully automatic aluminium circular saw with 90° cutting capability and drilling unit TR 12 (up to ø10 mm) or TR 20 (up to ø20 mm), featuring simple and safe operation with excellent cutting performance. This machine is capable of only making 90° cuts, allowing workpieces to be drilled and cut in a single workflow. Technical Specifications: ● Cutting range: 90°: round 100 mm / square 100 x 100 mm / rectangle 170 x 60 mm ● Drive power: 1,9 kW / 400 V / 50 Hz ● Speed: 3000 RPM ● Feed: Single feed 300 mm (double stroke up to 600 mm) ● Max. Cutting Height: 100 mm ● Blade Dimension: 350 x 32 mm Standard Equipment: ● Machine with 90° cutting capability, powered by a high-performance motor ● Clear and large-sized control panel ● Length adjustment from 5 to 300 mm via handwheel and counter ● Main clamping unit with 3 pneumatic clamping cylinders (1 horizontal, 2 vertical) ● Feed clamping unit with horizontal and vertical pneumatic clamping cylinder ● Large protective cover, covering the entire working area, pneumatically raised ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for dust extraction system ● Minimal lubrication system Cgjb Esmftiwey T Rtet ● TR 12 or TR 20, fixed automatic drilling unit with one tool holder; spindle speed adjustment, drilling depth, etc. are manually adjusted; drilling cycle occurs automatically --> Also availabe with CNC control or in various sizes!

Condition: good (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: D0100105, saw blade diameter: 400 mm, feed length X-axis: 600 mm, FOM Industrie - Mirage. Automatic pneumatic feeder. Feed of 1 aluminum profile and saw on small pieces. year 2006, working condition - good. Cgeb Eyjv Etc Ro T Rtjt

Condition: refurbished (used), Year of construction: 2024, Eisele VA-L-350 Retrofit Fully automatic high-performance sawing machine with feed chain magazine for non-ferrous metals and plastics Manufacturer: Eisele Type: VA-L-350 Overhaul year: 2024 Saw blade, carbide: 350-400 mm Drive power, saw motor: 15 KW Saw motor speed: 1500 - 6000 min-1 Saw blade cutting speed: 1650 - 7500 m/min Saw blade feed steplessly adjustable: hydraulic Saw height control infinitely variable: fully electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 200 x 100 mm Working range round 90° max.: 130 mm Feed length single stroke: 5-900 mm Multiple stroke 5-9999 mm Feed speed servo-controlled feed unit: 350 mm/s Compressed air connection on site: 6-8 bar Weight (saw)approx.:1600 kg (magazine)approx.:2200 kg (optional) Dimensions LxWxH (saw)approx.: 1800mm x1300mm x1950mm (magazine)approx.: 7300mm 3900mm x1200mm (optional) Installation dimensions LxWxH approx.: 9200mm x4800mm x2800mm Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The PLC control system ensures simple and very profitable operation of the machine. Thanks to the powerful motor, short cycle times can be achieved even when sawing thick-walled profiles or solid materials. The soundproof cabin reduces the resulting noise emissions to a minimum. The machine is overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to Siemens S7 - Renewal of the ball screw drive - New hydraulic lines (hydraulic version) - New pneumatic lines (pneumatic version) - New pneumatic and/or hydraulic components Cgob Eyjuizlps T Rtst - Overhaul of the control valves - Optimization of the suction performance - Overhaul of the Menzel minimum lubrication system - Replacement of general wear parts - Overhaul of the cab - Replacement of all bearings and wear parts - Replacement of servo and frequency converter The machine is also equipped with - Reinforced motor 15 KW - Minimization of the material residue - Soundproof cabin - Splitting extension (for a high-quality cut surface without return marks) Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Mass clamping device for parallel sawing of several workpieces - Hydraulic clamping system - Flat magazine for automatic feeding of primary materials up to 6 m long - Roller conveyors on the infeed side - Roller conveyors on the outfeed side - Delivery and installation on your premises - Training of your employees

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm Control total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,1 x 0,95 x 1,7 m SPECIAL PRICE!!! Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade for low-burr cuts · Material hold-down roller · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Single feed 530 mm · Section length min. 4 mm max. 9,999 mm For profile cuts, the use of our B & S Coolmatic Plus is mandatory necessary. CNC Control: · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Cebsd Iinyj Ey T Rtegt Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire workflow with simple data entry

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Saw band 250-285 mm Motor power 5.5 KW Cutting speed 35-160 m/min Working range square max.: 15 - 60 mm Working range round max.: 15 - 70 mm Saw feed 2 - 100 mm/s infinitely adjustable Cutting length 5-250 mm Cob Ey Touizlcs Rtsgt Feed speed max. 1000 mm/s Weight (saw)approx.: 1500 kg (magazine)approx.: 800 kg Dimensions LxWxH (saw)approx.: 1100mm x 1600mm x 2300mm (magazine)approx.: 7500mm x 1400mm x 1600mm The machine is suitable for mass cutting of steel due to its equipment and construction and is the predecessor of the KASTOwa C7 and KASTOspeed C9. The machine will be in mint condition after a general overhaul (retrofit), which is guaranteed by our company. The machine will be generally overhauled in our company at the customer's request. Among other things, the following points will be renewed: - New PLC control Siemens S7 - Conversion to Siemens HMI - Conversion to fully electronic section length selection (optional) - New electrical components - New pneumatic lines - Overhaul or replacement of all pneumatic components - New hydraulic lines - Overhaul or replacement of all hydraulic components - Overhaul of Menzel minimum lubrication system - Replacement of general wear parts - Overhaul of the loading magazine - Extension of the safety concept The machine also has: - a slide-off magazine for 6m bars - Hydraulic material feed unit Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Conversion to spindle extraction - Conversion to trapezoidal spindle stop manual 0-800mm - Conversion to fully electronic ball screw stop 0-800mm - Conversion of main saw drive to 18 KW - Delivery and installation on your premises - Training of your employees

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 10/95 mm capacity 45 degrees: flat 135x60 mm engine 2,5 0 1700 / 3400 U/min weight of the machine ca. 600 kg dimensions 2,0 x 1,5 x 1,7 m Cgob Eyefg Rlgj T Rtjt COBRA 352 NC 5.0, automatic circular saw with semi-automatic function, for sawing of aluminum and light metal alloys for the use of HM circular saw blades. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left. Numerically controlled circular saw machines with the new one specially designed by MEP for Automatic machines developed, Windows “CE” based control