Used Gildemeister Gd 16 for sale (244)

Condition: used, Year of construction: 2002, turning diameter 16 mm spindle passage 16 mm turning length 160 mm control GE FANUC Series 18 i-T spindle turning speed range 8000 U/min rapid traverse 30 m/min total power requirement 2,2 kW weight of the machine ca. 2,1 t Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm); chip conveyor, Lhedpfx Aasvh I Tvjled coolant

Condition: good (used), Year of construction: 1990, Ref. -No.: 10542 Manufacturer: GILDEMEISTER Type: AS - 16 Year of construction: 1990 Max. Rod diameter: 16 mm Lhsdpjxmd Txsfx Aaljd Number of spindles: 6 Pcs Guide rod length: 3,3 m Further information: The machine can be viewed under power by arrangement.

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Crosses slides, in position : 1,2,4,5 - Max. travel of transverse slides : 28 [mm] - Max. travel of crossed slides : 45 [mm] - Max. travel of front spindles : 63 [mm] Lhedpfewvvrhjx Aaled SPINDLES - Max. bar diameter : 16 [mm] - Spindle speeds : 400 - 6000 [rpm] - Spindle power : 15 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 31 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.800 x 1.300 [mm] - Machine height : 2.100 [mm] - Machine weight : 4400 [kg] EQUIPMENT - Double mechanical cut and return slide, in position : 6 - Rotary front spindles, in position : 1,2,3,4,5 - Parts catcher - Parts conveying strip - Bar waste chute - Chips conveyor - Coolant tank - Bar loader : Iemca PRA 40/33/P - Bar holder and stand - Bar holder housing

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Crosses slides, in position : 1,2,4,5 - Max. travel of transverse slides : 28 [mm] - Max. travel of crossed slides : 45 [mm] - Max. travel of front spindles : 63 [mm] SPINDLES - Max. bar diameter : 16 [mm] - Spindle speeds : 400 - 6000 [rpm] - Spindle power : 15 [kW] Lhodswvvrbspfx Aalod POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 43 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.800 x 1.100 [mm] - Machine height : 2.300 [mm] - Machine weight : 4200 [kg] EQUIPMENT - Double mechanical cut and return slide, in position : 6 - Rotary front spindles, in position : 1,2,3,5 - Parts catcher - Parts conveying strip - Bar waste chute - Chips conveyor - Coolant tank - Bar loader : Iemca PRA 40/31/P - Bar holder and stand - Bar holder housing

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 5601-0267, turning diameter: 33 mm, overall weight: 4,200 kg, rotational speed (max.): 8,000 rpm, travel distance Z-axis: 320 mm, Equipment: bar feeder, TECHNICAL DETAILS Turning diameter: 33 mm Z-axis travel: 320 mm Rapid traverse (X/Z): 30 m/min Max. ejection: approx. 190 mm Max. spindle speed: 8,000 rpm Tool stations: 5+3 MACHINE DETAILS Ljdpfxoyfqt Do Aalohd Control: GE Fanuc Series 16i-T Drive power: 5.5 / 7.5 kW Dimensions & Weight Required space (L x W x H): 3.08 x 1.51 x 1.75 m Machine weight: 4,200 kg EQUIPMENT Iemca bar feeder

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Lhsdetzyx Tspfx Aalsd Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Condition: good (used), Multi-spindle lathe (6 spindles) max. bar diameter 16 mm guide tubes 4,000 mm chip conveyor Lodpfx Asp Dux Tjalehd

Condition: used, CNC control, numeric control, from GILDEMEISTER GDM 65/2A GILDEMEISTER type Eltropilot EP20 GD-2A year of manufacture 1989 Order: 150 299 Ser. No.: 0.854.183 Mains connection: 220 VAC 50 Hz Rack with 20 module places - 11 Built-in modules Dimension W x H x D 480x 260 x 220 mm Lhjdpfsh Ecnasx Aaljd Weight approx. 7 kg The control comes from a lathe Gildemeister GDM 42/2A. Further components from the Gildemeister can be found under stock no: 60343, 60346, 60347

Condition: ready for operation (used), spindle bore: 36 mm, turning diameter over cross slide: 33 mm, turning length: 320 mm, Technical Data: Main Spindle: - Maximum turning diameter: 33 mm - Maximum speed: 8,000 rpm - Drive power: 5.5 kW - Drive power at 60% duty cycle: 7.5 kW Slide 1: - Z1 slide travel: 320 mm - X1 slide travel: 50 mm Ljdpsw Rcd Eofx Aaljhd - Y1 slide travel: 255 mm - Rapid traverse speed: 30 m/min - Ballscrew diameter: 25 mm Tool Slide 1: - Number of stationary tools with 16 x 16 shank: 5 tools Slide 2: - X2 slide travel: 165 mm - Z2 slide travel: 200 mm - Rapid traverse speed: 30 m/min - Ballscrew diameter: 30 mm Tool Slide 2: - Number of turret stations with integrated spindle: 8 positions - Number of axial driven tools (integrated): 8 positions Coolant tank capacity, approx.: 400 liters Coolant pump max. flow rate: 80 l/min Dimensions (L x W x H), approx.: 2,460 x 1,510 x 1,750 mm Equipment: - Fanuc iT CNC control - Parts discharge system - IEMCA bar loading magazine - 5-position tool plate for Slide 1 - Electrical and software interface for bar loading magazine - Drill holder for main spindle and pick-up spindle - 2 double drill holders for rear working support with cylinder - Part pusher for pick-up spindle

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8086010539B, spindle speed (max.): 6,500 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,500 rpm, feed length X-axis: 65 mm, feed length Y-axis: 120 mm, feed length Z-axis: 350 mm, total height: 1,920 mm, total length: 4,900 mm, counter spindle motor power: 3,700 W, counter spindle speed (max.): 6,500 rpm, number of axes: 6, DMG Gildemeister Sprint 42 Linear (year of manufacture 2008) with IEMCA Boss 545‑E bar feeder Lsdeyt E T Uspfx Aalehd The main and counter spindles have been newly re-bedded, and the machine has undergone a comprehensive general overhaul. Additionally, the following parts have been newly replaced: - Counter spindle dismantled, newly re-bedded, and overhauled - Ball screw of the Y-2 axis replaced - Main spindle newly re-bedded - New clamping fingers and clamping rollers on the main spindle - New work area lamp - New valve manifold for the main and counter spindle clamping units - New rotary union for the bar feeder - 4 new driven tools The DMG Gildemeister Sprint 42 Linear is specifically designed for automated turning operations. With two workpiece spindles, six linear axes, and optionally two C-axes, it enables simultaneous machining on the main and counter spindles. The maximum bar capacity is 42 mm, and the high spindle speed reaches up to 6,500 rpm. Technical specifications: Axes & slides: Travel distances X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm with rapid traverses up to 30 m/min. The second slide provides X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm with rapid traverse 30 m/min (X2/Z2) or 18 m/min (Y2). Tool capacity: Turret with 26 stations; accepts both fixed turning tools and driven tools for milling and threading operations. Spindles: Main and counter spindles with 6,500 rpm, nominal ratings 5.5 kW (main) and 3.7 kW (counter), torque (S1) 37.5 Nm and (S2) 19.6 Nm. Control: CNC Fanuc 160i‑TB with SlimLine control panel and 15" color TFT – intuitive operation via industrial PC. Dimensions & logistics: Base machine (L × W × H): 3,354 × 946 × 1,571 mm, weight 4,700 kg. Control cabinet: 5,400 × 680 × 1,750 mm. Machining center at ergonomic height of 1,100 mm. IEMCA Boss 545‑E bar feeder (type 32 LL, year of manufacture 2007) The included bar feeder greatly facilitates series production. It is designed for bar diameters up to 42 mm, weighs approx. 860 kg, and operates at 400 V/50 Hz; required compressed air connection is 6 bar. If you have any questions or require further information, please feel free to contact us.

Condition: used, Parts donor We are dismantling the CNC lathe GILDEMEISTER Type GDM 42/2A CNC control unit Eltropilot EPL 2 Machine no. 4.5733 Year of manufacture: 1989 Machine not operational – electrical issues Standard turning diameter: 185 mm Max. swing diameter: 400 mm Cross slide travel (X-axis): 190 mm Longitudinal slide travel (Z-axis): 450 mm Spindle bore: 52.7 mm Spindle passage in draw tube: Ø 42 mm Max. feed rate X and Z: 3000 mm/min Spindle speed: 40–6300 rpm, stepless Spindle drive motor power: 22 kW Power supply: 400 Volt, 50 Hz, 45 kVA - Hydraulic 3-jaw chuck FORKARDT Ø 200 mm Lhedpfsdzqm Rsx Aalod - 12-position tool turret, VDI 40, every second station powered - Powered tool stations at 6 positions - Electrical cabinet placed beside the machine Footprint (complete machine) L x W x H: 5000 x 2500 x 2100 mm Total weight of the unit: approx. 5.7 tons In good condition Transport dimensions: Required space for basic machine L x W x H: 3000 x 2300 x 1900 mm Weight of basic machine: approx. 4.8 tons Required space for electrical cabinet L x W x H: 2500 x 550 x 2000 mm Weight of electrical cabinet: approx. 450 kg Without chip conveyor Main motor missing Individual parts available on request

Condition: good (used), Year of construction: 2008, feed length X-axis: 575 mm, feed length Y-axis: 90 mm, feed length Z-axis: 300 mm, Order No. 3.2-115 1 used CNC Lathe GILDEMEISTER type CTV 160, built 2008 1 used CNC Lathe GILDEMEISTER type CTV 160, built 2008 Siemens 840D control 3-jaw chuck Chip conveyor Coolant device Siemens 840D control 3-jaw chuck Coolant device Lhjdpeubvv Tofx Aaljd Chip conveyor Technische Daten / technical details: Drehdurchmesser / turning diameter 160 mm X / x 575 mm Z / z Y/y 300 +-90 mm mm Drehzahlbereich / spindle speed range 6000 UpM / rpm Weight of the machine ca. / weight ca. 6000 kg Technical data, accessories and description of the machine are not binding. Technical data, accessories and description of the machine are not binding.

Condition: like new (used), Lathe completely overhauled from an electrical and mechanical point of view as new with painting Ljdpfxowit Elj Aalehd

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 5601-0106, turning length: 320 mm, spindle speed (max.): 10,000 rpm, overall weight: 2,800 kg, bar passage: 33 mm, equipped with Iemca Boss 542 new in 2000 – well tooled – Ge Fanuc 18i-T Control Ledpfx Aaoxn R N Aolshd

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Technical Data: Turning diameter: 600mm Turning length: 1190mm Lhodpfx Aaexrg S Islsd Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Max. bar diameter: 75mm Turret: Number of tool stations: 12 pos - VDI 40 Travel: X-axis: 398mm Z-axis: 1250mm Tailstock: Tailstock travel: 1150mm

Condition: ready for operation (used), controller model: Fanuc 310i, empty load weight: 10,000 kg, total length: 4,500 mm, total width: 1,990 mm, total height: 2,300 mm, swing diameter over cross slide: 950 mm, Spindel 1: 20 kW - 5000 tpm - spindelboring: 70 mm Revolverkop 1: 12 aangedreven gereedschappen - 2,5 kW - 4000 tpm Aangedreven C-as X1 uurwerk: 165 mm Y1 beweging: +50/-30 mm Z1 uurwerk: 678 mm Spindel 2: 17 kW - 5000 tpm - spindelboring: 42 mm Revolver 2: 12 aangedreven gereedschappen - 2,5 kW - 4000 tpm Aangedreven A-as X2 uurwerk: 165 mm Z2 uurwerk: 640 mm Iemca Master 880 P staafaanvoer Dia of spindle bore: 70 & 42 mm Power on the spindle: 20 & 17 kW Number of speeds: 5000 rpm Lhodpsv Rwltofx Aaled Chuck: Ø 175 mm Toolchanger: yes (2x) Number of tools: 12 tools (2x)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details. • Electrical connection/total power: 65 kVA Ledpfxeyvz Ibs Aalehd • Tool holder: VDI 30 • Tool changer type: Turret • Configuration: Multi-slide turning center with Slide 1 (Top), Slide 2 (Bottom), and Slide 3 (Counter spindle) • Axes travels: • Slide 1 (Top): X1 (Cross) 300 mm; Z1 (Longitudinal) 650 mm; Y1 (Vertical) ±40 mm (only on version with Y-axis) • Slide 2 (Bottom): X2 (Cross) 180 mm; Z2 (Longitudinal) 650 mm • Slide 3 (Counter spindle): X3 (Transverse) 175 mm; Z3 (Longitudinal) 670 mm • Counter spindle: max speed 5000 rpm; power 26 kW (40% ED) / 21 kW (100% ED) • C-axis: Integrated for oriented stopping and contouring • Driven tools: 12 stations per turret; all 12 stations capable of driven tools; max power 11.7 kW; speed up to 4000 rpm Additional equipment • Touch probe • Chip conveyor • Internal coolant supply Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC turning and milling centre with Y-axis, 2 turrets, subspindle and bar feeder. A total of over 44,000 EUR has been invested in necessary repairs and maintenance over the last 5 years by DMG MORI (replacement of the main spindle S4, ball-screws, etc.). Technical details turning diameter 100 mm turning length 320 / 345 mm swing diameter 145 mm spindle distance 580 mm slide I - cross travel (X1) 220 mm slide I - longitudial travel (Z1) 320 mm y-axis +/- 30 mm rapid traverse (X/Y/Z) 30/15/30 m/min slide II - cross travel (X2) 120 mm slide II - longitudial travel (Z2) 345 mm rapid traverse (X/Z) 30 m/min Travel subspindle (Z3) 380 mm vertical stroke (X3) 145 mm bar material dia. max. 36 mm rapid traverse (X/Z) 20/30 m/min power capacity (40/100 % ED) 26/21 kW spindle turning speed range 40 - 7200 rpm total power requirement 42 kVA weight of the machine ca. 5,3 t Equipment: - SIEMENS 840 D powerline CNC control - Number of controlled axes: 9 - 2 x C-axis - Y-axis in upper turret Lhedpfx Ajyubdfoalsd - Pick-up device with gripper - 2 SAUTER turrets with 12 tool positions (driven), VDI 25 - Tool drive with a speed range of 30 to 6000 rpm - Coolant system with paper band filter - Chip conveyor - Collet chuck on main and subspindle - Bar loading magazine, make: IEMCA BOSS 332 E 32 L, max. bar length 3180 mm

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Driven tool speed: 4,000 rpm - Both turrets with internal cooling - High-pressure unit - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3,200 mm Dimensions LxWxH: - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm Lhedexa Epbjpfx Aaled - Chip conveyor: 3,000 x 1,100 x 1,600 mm Total weight: approx. 6,000 kg

Condition: used, Year of construction: 2003, Technical details: turning diameter: 640 / 400 mm turning length: 1500 mm control: Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z: 550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis): ±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/24/60 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 12 / 23 kW Torque of milling spindle: 100 Nm Tool magazine for milling spindle (turret 1): 120 HSK-A 63 Tool change time tool/tool, milling spindle: 1,6 s Spindle 1 RPM: 4000 1/min Spindle 1 power: 36/ 45 kW Spindle 1 Torque: 730 Nm Spindle 1 max. bar diameter: 90 Spindle 2 RPM: 4000 1/min Lhjdpfx Aaoyv Dnkjlsd Spindle 2 power: 36 / 45 kW Spindle 2 torque: 730 Nm Spindle 2 max. bar diameter: 90 c-axis: 0,001 ° Travel turret 2 x: 225 mm Travel Turret 2 z: 1595 mm RPM of rotary tools turret 2: 4000 1/min no. of tools in turret 2: 12 VDI 40 high-pressure pump: 20 bar total power requirement: 110 kVA weight of the machine ca.: 24 t dimensions of the machine ca.: 9,3 x 4,6 x 3,1 m Accerories Chip conveyor Automatic door High performance turning and milling center with milling head (X, Y, Z, B-Axis), tool magazine with 120 pos. HSK-A 63. Excellent for manufacturing excentric parts. Coolant system with 1000 l tank and coolant system 4 kW. Both spindles have differencial pressure clamping system Steayrest for lower turret dia 8-101 mm. Parts gripper for turret No. 2 with 3-jaw chuck for parts with max. dia. 140 mm. Conveyor belt for finished parts. Preparation for 3D-probe Toolmonitor Artis Machine can be shown under power. *

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 06800001511, Used: CNC vertical lathe Lhedpfxjwzk D As Aalsd Manufacturer: DMG/ GILDEMEISTER Model: CTV250 Year of manufacture: 2003 Serial number: 06800001511

Condition: excellent (used), Year of construction: 2004, - Fagor digital display - Accessories available Lhedpfx Aoyvy Rnealsd Working area Max. turning diameter over bed: 350 mm Max. turning diameter over cross slide: 200 mm Centre height: 180 mm Centre distance: 1000 mm Bed width at guideway level: 255 mm Top slide travel towards headstock: 60 mm Top slide travel away from headstock: 55 mm Spindle nose with flange according to ISO 702-3 (DIN 55027) C6 (DIN 6) Spindle taper: Morse taper 6 Spindle bore: 54 mm Tailstock quill taper: Morse taper 4 Tailstock quill travel: 100 mm Tailstock lateral adjustment: ± 10 mm Spindle speed range, stepless: 40 – 2500 rpm Feed levels: Longitudinal feed: 9 Cross feed: 9 Feed rates: Longitudinal feed: 0.04 - 0.4 mm/rev Cross feed: 0.02 - 0.2 mm/rev Metric threads: Number: 28 Pitch: 0.2 – 4.5 mm Inch threads: Number: 21 Pitch: 76-8 TPI Module threads: Number: 28 Pitch: 0.2-4.5 mm Diametral pitch threads: Number: 21 Pitch: 76-8 DP Leadscrew thread pitch: 6 mm Tool holder section: 20x20 mm Max. spindle torque: 200 Nm Main drive power: 4 kW (5.5 HP) Electric pump power: 0.12 kW (0.16 HP) Synchronous speed of main motor at 50 Hz: 1500 rpm / at 60 Hz: 1800 rpm Synchronous speed of coolant pump motor at 50 Hz: 3000 rpm / at 60 Hz: 3600 rpm Machine dimensions Length x width x height: 2300 x 940 x 1400 mm Weight: 1500 kg

Condition: good (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 2601-0324, spindle speed (min.): 6,500 rpm, spindle bore: 42 mm, travel distance X-axis: 326 mm, travel distance Y-axis: 265 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 18 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (min.): 6,500 rpm, type of input current: three-phase, bar passage: 42 mm, The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center featuring 6 linear axes and 2 C-axes. Direct drives enable high acceleration rates and precise machining operations. Both the main and sub spindles have been fitted with new bearings, and the machine has undergone a comprehensive overhaul. The following components have recently been renewed: - Drive motor of the driven tool 2 replaced - Sub spindle newly fitted with bearings - New door interlock switch installed Spindles: Main and sub spindle each up to 6,500 rpm, main spindle bar capacity 42 mm, sub spindle 38 mm Tool capacity: 26 stations, up to 11 powered tools; turret with Y-axis for milling and threading operations Axes / travels: Lhjdpeyvy I Tofx Aaled Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm Rapid traverse: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min Control: FANUC 160i-TB with 15" DMG SlimLine panel Including IEMCA Boss 545-E bar feeder The IEMCA Boss 545-E bar feeder (type 32 LL, year 2007) is included in the scope of delivery and enables continuous material feed up to Ø 42 mm. It operates on 400 V / 50 Hz and requires 6 bar air pressure; its own weight is approx. 860 kg. Inspection & collection: On-site inspection is possible If you are interested or have technical questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2003, turning diameter 320 mm turning length 750 mm control Siemens type 810DL CCUO turning diameter over slide rest 150 mm cross movement 185 mm spindle passage 52 mm turning speeds 14-3550 U/min transmission ratio 2 quill stroke 120 mm rapid traverse 6 m/min Lhsdsyutucepfx Aalod main drive motor 7 kW 3-jaw-chuck diameter 200 mm total power requirement 10 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,6x1,44x1,44 m 8950 turning hours The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1987, turning diameter 400 mm turning length 600 mm swing diameter 600 mm spindle bore 73 mm The tech. Data are manufacturer or operator information and therefore non- Lhjdeyutruspfx Aaljd binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team