Used Gildemeister Ctx 400 for sale (20)

Condition: used, Year of construction: 2002, turning diameter 400 mm Pjdpfx Asy I A U Hol Nspu turning length 635 mm control Heidenhain Eltropilot greates pass round over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm drive of main spindle 21 kW max. torque on the spindle 240 Nm main spindle speeds: 25-5.000 turning speed range - C-axis 100 U/min feed power in the axis x + z 3,5 / 7 N rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min total power requirement 44 kva weight of the machine ca. 6 t

Condition: good (used), Year of construction: 1999, - Control system: Heidenhain CNC Pilot 3190/4290 - Turn-Plus software update - Turning diameter: 500 mm - Turning length: max. 635 mm - Spindle speed: 25-5000 rpm - 12-station turret, no driven tools - Tool holder VDI 30 - Tailstock - Chip conveyor Ppjdpfx Aszggahel Nsu

Condition: used, Year of construction: 1998, swing diameter max. over bed cover 570 mm swing diameter over face slide 420 mm control Heidenhain CNC PILOT longitudinal stroke 635 mm face stroke 220 spindle bore 79 mm centre distance 1000 mm chucking diameter 250 mm tailstock taper MT 4 feed speed longitudal 0,025-24.000 mm/min. Pedpfx Aljzcfc Ij Nopu feed speed face 0,025-20.000 mm/min. power feed longitudinal 7.000 N Feed Force Face 3.500 N total power requirement 44 weight of the machine ca. 5,7 t dimensions of the machine ca. 7,5 x 4,0 x 1,7 m Accessories: - 3 clamping jaws - various tool holders

Condition: ready for operation (used), Year of construction: 1993, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, number of axes: 2, Horizontal turning machine manufactured in 1993. This Gildemeister CTX 400 is in good condition and fully functional, featuring EPL 2 control. It comes with an extraction hose/pipe connected to the side enclosure. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 machine we have for sale. Contact us for further details. - Manufacturer: Gildemeister- Model: CTX 400- Year of Manufacture: 1993- Condition: Good / Fully functional- Control: EPL 2- Attached Equipment: Extraction hose/pipe visible connected to the side enclosure Pjdpfozb E E Tsx Al Njpu Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1991, travel distance X-axis: 212 mm, travel distance Z-axis: 640 mm, number of axes: 2, Horizontal turning machine manufactured in 1991. This Gildemeister CTX 400 features a reliable EPL 2 control system, ensuring efficient operation. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 machine we have for sale. Contact us for further details. Ppodjzb Ewcepfx Al Nsu - Manufacturer: Gildemeister- Model: CTX 400- Year of Manufacture: 1991- Condition: Good / Fully functional- Control System: EPL 2 Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 1992, operating hours: 53,500 h, functionality: fully functional, CNC turning machine Manufacturer: GILDEMEISTER Model: CTX-400 Year of manufacture: 1992 Ppodpfx Aszcd Hlel Neu Control system: EPL-2 Operating hours: approx. 53,500 h Serial number: 310549 Technical data: - Turret: 12 stations VDI-30 of which 6 stations are driven - Spindle speed: 25 - 5,000 rpm Drive power: 27.5 kW at 60% duty cycle - Spindle bore: Ø 72 mm - X-axis travel: 212 mm - Z-axis travel: 640 mm - Max. turning diameter: 500 mm - Turning diameter over guide: 290 mm - Hydraulic steady rest (following rest) Quill stroke 100 mm / MK4 mounting - Hydraulic steady rest SMW Autoblok - Hydraulic 3-jaw chuck 200 mm - Collet chuck Hainbuch - Chip conveyor - Parts catcher (disassembled / incomplete) - Complete programming manual - Mechanical and electrical documentation - Large accessory package of jaws / holders - Spare parts package (drive belts / small parts) - 2x foot switches - Machine weight: 5.2 t - Loading onto truck included

Condition: good (used), General Information: Model: Gildemeister CTX 400 Series 2 Year: approx. 2000 Control: Heidenhain CNC Pilot Configuration: C-axis with driven tools Technical Specifications: Max. turning diameter: ~400 mm Max. turning length: ~600 mm Swing over bed: ~570 mm X-axis travel: ~220 mm Z-axis travel: ~635 mm Spindle: Spindle speed: up to 5000 rpm Spindle power: approx. 21–28 kW Bar capacity: ~79 mm Turret & Tooling: Podoy Ixxbspfx Al Nepu 12-position turret VDI 30 tool holders C-axis for milling/drilling operations Rapid Traverse: X-axis: ~20 m/min Z-axis: ~24 m/min Condition & Maintenance: The machine has recently undergone a complete hydraulic overhaul Brand-new hydraulic pump installed Full service completed in February 2026 Current status: The machine is showing an X-axis alarm Therefore, it is offered for sale as-is in current condition Additional Information: Machine can be inspected on site Known as a solid and reliable turning center suitable for medium-sized parts Ideal for turning operations with additional milling capability (C-axis )

Condition: used, Year of construction: 2000, Gildemeister CTX 400 S2 Year of manufacture: 2000 2-axis machine (X and Z) 12-tool turret, VDI30 Fanuc 21iT control system Ppsdpfx Aezgupkol Nou Tailstock Chip conveyor included Very good condition, machine comes from a school Operating hours: 14,000

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Gildemeister lathe Color: Pink Rose 3 axes X, Z, C Type: CTX 400 Series 2 CNC Heidenhain With conveyor Ppedpfx Aley A Imqo Nsu With driven tooling With documentation

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Gildemeister Lathe Color: White 3 axes X, Z, C Model: CTX 400 Series 2 Ppjdsy A Ilyjpfx Al Nou CNC Heidenhain With chip conveyor With driven tooling With documentation

Year of construction: 1999, condition: ready for operation (used), Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible. Ppodpfx Aleza E Sqo Nou

Operating hours: 68,816 h, condition: ready for operation (used), functionality: fully functional, overall weight: 5,500 kg, total length: 4,500 mm, total width: 1,950 mm, total height: 1,750 mm, torque: 263 Nm, turning diameter: 290 mm, bar diameter (max.): 72 mm, bar passage: 72 mm, chuck outer diameter: 200 mm, feed length X-axis: 212 mm, feed length Z-axis: 640 mm, quill diameter: 80 mm, quill stroke: 100 mm, rapid traverse Z-axis: 15 m/min, rapid traverse X-axis: 10 m/min, rotational speed (max.): 5,000 rpm, rotational speed (min.): 25 rpm, swing diameter over bed slide: 500 mm, swing diameter over cross slide: 290 mm, turning length: 640 mm, type of input current: three-phase, machine/vehicle number: 310142, Equipment: documentation/manual, Basic Data Manufacturer: Gildemeister Pjdpfx Aloy Tx Aws Njpu Type: CTX 400 Machine No.: 310142 Year of Manufacture: Not specified, presumably early 1990s Control System: Gildemeister EPL / Grundig Operating Hours: 68,816 h Weight: 5,140 kg Dimensions L x W x H: 4,527 x 1,940 x 1,730 mm Connection: 400 V / 50 Hz Power: 45 kVA Turning Data Minimum Spindle Speed: 25 rpm Maximum Spindle Speed: 5,000 rpm Maximum Torque: 210 / 263 Nm Turning Diameter: 290 mm Turning Diameter over the Way Rest: 500 mm Turning Diameter over the Facing Slide / Facing Guide Cover: 290 mm Turning Length: 640 mm Bar Diameter / Spindle Bore: 72 mm Chuck Outer Diameter: 200 mm Axes / Travels Feed Travel X-axis / Facing Travel: 212 mm Feed Travel Z-axis / Longitudinal Travel: 640 mm Rapid Traverse X-axis: 10 m/min Rapid Traverse Z-axis: 15 m/min Y-axis: Not available / leave blank Tailstock Quill Diameter: 80 mm Quill Stroke: 100 mm Quill Taper: MK 4 Maximum Quill Pressure: 800 daN Tool Holder Tool Stations: 12 Tool Holder: VDI 30 Powered Tools: Not available / do not enter C-axis: Not available / do not enter

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 313154, spindle bore: 79 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,500 mm, total length: 5,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: GRUNDIG, controller model: ELTROPILOT, input voltage: 400 V, input frequency: 50 Hz, input current: 64 A, nominal power (apparent): 44 kVA, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, Equipment: documentation/manual, GILDEMEISTER CTX 400 E CNC Lathe - Swing diameter over bedway cover: 570 mm - Swing diameter over cross-slide cover: 420 mm - Cross travel (X-axis): 220 mm - Longitudinal travel (Z-axis): 635 mm Psdpfoy I Tcuox Al Nspu - Main spindle headstock diameter: 170 mm - Spindle diameter in front bearing: 120 mm - Chuck diameter: 200/250 mm - C-axis speed: 100 rpm - Holding torque: 200 Nm - Indexing accuracy: 0.04° - Including 12-station tool turret, with 6 driven positions - Tailstock diameter (front): 80 mm - Tailstock travel: 515 mm - Tailstock taper: MT 4 The machine is equipped with a tailstock, tool holders in the tool turret, and a three-jaw chuck, diameter: 200 mm. Attention: The item must be collected bindingly between 24.08. and 27.08.2026 by prior arrangement. FCA D-61352 Bad Homburg – loaded onto truck

Condition: ready for operation (used), Year of construction: 2002, operating hours: 53,548 h, functionality: fully functional, machine/vehicle number: 01160014061, turning length: 630 mm, turning diameter: 420 mm, vice opening: 66 mm, control type: CNC control, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Turning diameter: max. 420 mm Ppodpeza D Rfefx Al Nju Turning length: max. 630 mm Spindle bore: 66 mm Turret Tool head: 12 tools, Sauter VDI30 CNC control: 4290 Heidenhain MACHINE DETAILS Electrical data Voltage: 400 V Auxiliary voltage: 230 V / 24 V Frequency: 50 Hz Current: 80 A Connected power: 44 kVA EQUIPMENT C-axis with driven tools Machine chip conveyor Documentation 2 driven tool holders External reference: 598

Condition: excellent (used), Year of construction: 1993, operating hours: 2,859 h, functionality: fully functional, turning length: 600 mm, turning diameter: 290 mm, Universal Lathe – GILDEMEISTER CTX Year of manufacture: 1993 Operating hours: 2,859 h • 12-position turret tool holder • Max. spindle speed: 5,000 rpm Ppsdpfxoyxgi Nj Al Nou • Max. turning diameter (X axis): 290 mm • Max. turning length (Z axis): 600 mm • Hydraulic 3-jaw chuck, Ø 200 mm • Spindle bore: Ø 66 mm • Chip conveyor included The machine is in very good condition and was previously used in a technical training facility.

Condition: excellent (used), Year of construction: 1995, Equipment: documentation/manual, FOR SALE: CNC LATHE GILDEMEISTER CTX400 TECHNICAL AND VISUAL CONDITION: Very good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX400 Control: Heidenhain 1190 Country of origin: Germany Year of manufacture: 1995 Machine specifications: - Turret: 12 tool stations, VDI-30 tool holders - Max. spindle speed: 5000 rpm - Hydraulic tailstock - Parts catcher - Max. turning diameter X-axis: 290 mm - Max. turning length Z-axis: 600 mm Ppsdpoy Rbr Nsfx Al Nsu - Coolant system - Three-jaw hydraulic chuck 200 mm - Spindle bore: 66 mm - Through-spindle - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5.5 tons - Loading onto truck included in the price The machine has undergone a full technical inspection. 100% operational. Connected and ready for work. Stal-Com has been selling, servicing, and providing training on CNC machines from the DMG group for 17 years. We specialize in all models of Gildemeister lathes as well as Deckel Maho machining centers. All machines undergo a thorough technical inspection. Besides Polish customers, our machines are purchased by clients throughout Europe and parts of Asia. Each machine can be inspected under power during production, as we also provide machining services. After purchasing a machine from us, we offer operator training and can help set up part production at the customer's site. We work with numerous companies on a long-term basis, supplying them with further machine tools.

Condition: ready for operation (used), operating hours: 31,819 h, turning diameter over cross slide: 290 mm, turning length: 600 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 645 mm, rotational speed (max.): 5,000 rpm, - CNC lathe with EPL 2 control, equipped with round magnet. It was last used for fine contour turning of hardened components. (without chuck, tailstock and chip conveyor) Technical data Swing diameter over bed: 300 mm Swing diameter over face: 290 mm Travel path X: 210 mm Travel path Z: 645 mm Pedpfx Alsqcu Uve Nspu Speed range: 25 - 5000 rpm Tool carrier: universal disk turret Tool positions: 12 Tool holder: 30 mm (DIN 69 880)

Condition: ready for operation (used), Swing diameter over bed/face slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, traverse path X/Z: 220mm/635mm, speed: 5000rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool positions: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4500kg. On-site inspection is possible. Ppjdpfx Aov Uqcgsl Neu

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Hello I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 400 V3 with driven tools and C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 3190 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 2000 _ Machine parameters: - head: 12 - tools for VDI 30 holders (every second socket driven) - max. rpm 5000/min. - max. turning length in the Z axis: 640 mm - max. turning diameter in the X axis: 290 mm - C axis - driven tools - BERG KH 200 spindle holder - max. shaft diameter Fi-65 mm - finished part collector - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work Pedetpuh Aspfx Al Nopu - purchase of the machine is possible through the installment system and leasing.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Hello I have for sale a reputable brand CNC lathe GILDEMEISTER CTX 400 V3 With driven tools and C axis. _ Type: CNC lathe machine Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 1190 + TURN PLUS overlay Country of manufacture: Germany Year of manufacture: 1997 _ Machine parameters: - head: 12 - tools for VDI 30 toolholders ( every second socket driven ) - max rpm 5000/min. - max length of turning in Z axis: 640 mm - max diameter of turning in X axis: 290 mm - C axis - driven tools - tool measuring probe - spindle holder BERG KH 200 - max. roller diameter Fi-65 mm- finished part pick-up - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM ? - we have our own service _ stationary and mobile - we have already sold more than 700 DMG machines - possibility to start up the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines are after professional technical inspection - 100% ready to work Ppsdpfx Astw U E Uel Nju - purchase of the machine is possible through the installment system and leasing. _ www_ppmsc_en _ Tom_Contact_+48 504 009 641 Paul_Contact_+48 607 305 841