Used Index Multi Spindle Machine for sale (140)

Condition: used, Year of construction: 2003, INDEX MS32G Ljdpfxsw A S H Ue Aa Eeta Overhauled completely: 2020 Original mfd. 2003 6 Spindles 32mm Capacity Siemens 840D control Equipped as pictured Kraft & Bauer fire extinguishing system All spindles on the machine were overhauled 2 years ago incl. clamping cylinder except for one on the GSP. - GSP is equipped with Hainbuch Spanntop and used Röhm jaw chucks - No tools are included - No FZ tubes / no bar pusher - Last year, spindle encoders on the HSP incl. GSP were completely renewed. Equipped with Lenord & Bauer IEMCA SIR-MS32/33/P See attached specifications.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 080005, • Turning diameter over slide: 1920 mm • Axis height: 1300 mm • Center distance: 2000 to 30000 mm • Maximum workpiece weight: 10–40 tons • Bed width: 2119 mm • Spindle speed: 1–500 rpm • Gear ratios: 4 • Spindle end: A2-15 • Spindle motor: 30/37 kW (optionally up to 60/75 kW) • Spindle bore: 230 mm (can be extended up to 610 mm) • Turret type: servo, 4 or 10 positions • Tool cross-section: 50/40 mm • X-axis travel: 1200 mm • Z-axis travel: 2000 to 30000 mm • X-axis ball screw: 63 mm x P10 • Ball screw in Z axis: 63 mm x P10 (over 5 m: 80 mm x P10) Ledpfxswab Rdo Aa Ejta • Tailstock quill diameter: 235 mm (possible up to 360 mm) • Tailstock quill extension: 250 mm (possible up to 300 mm) • Tailstock quill taper: MT #7 • Rapid traverse: 7 m/min

Condition: excellent (used), Year of construction: 2021, INDEX MS22-8 Mfd. 2021 (Commissioned 2022) Double NCU (2) Synchrons MBL Bar Feed 3.3 Meters Estimated Hours: 10,000 Lodpfowt Unvjx Aa Ejta Contact us for full specifications

Condition: excellent (used), Year of construction: 2021, INDEX C200, Mfd. 2021 Control: Siemens Solution Line 3 Turrets Ltedpfxox Av Dbj Aa Eea 2 Spindles D=90 mm IRCO VDI 30 With tooling prictured Short magazine bar Feed Machine located in Europe

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, INDEX MS40-6 CNC Multi-Spindle Year of Manufacture: 2011 Commissioned: 2012 Control: Siemens 840D (Dual NCU) Bar Capacity: 40 mm Slide Units Position 1.1: X / Z NC controlled Position 1.2: X / Z NC controlled Position 2.1: X / Z NC controlled Position 2.2: X / Z NC controlled Position 3.1: X / Y / Z NC controlled (Y ± 21 mm) Position 3.2: X / Z NC controlled Position 4.1: X / Z NC controlled Position 4.2: X / Z NC controlled Position 5.1: X / Z NC controlled Position 5.2: X / Z NC controlled Position 6.1: X / Z NC controlled Position 6.2: X / Z NC controlled Position 6.3: X NC controlled, Z fixed Bar Feed IEMCA SIR MS40/33/P magazine bar loader Workpiece Handling Parts chute at spindle position 6 Workpiece conveyor at spindle position 6 Synchronization unit at spindle position 6.1 Parts ejector Coolant feed preparation through counter spindle Back-Working Attachment at slide position 6.2 Up to 3 fixed toolholders Auxiliary Drive Preparation Electrical preparation for 2 auxiliary drives with electronic shaft (positions 1–3), synchronous with main and counter spindle Electrical preparation for 2 auxiliary drives with electronic shaft (positions 4–6), synchronous with main and counter spindle Compatible with auxiliary drives with incremental encoder (double module) Chip & Coolant System Hinge-belt chip conveyor (cross type), discharge height 1200 mm, front discharge with lift pump for filter unit Coolant filtration unit (50 Hz): Coolant tank: 800 L Vacuum rotation filter: 650 L capacity Plate heat exchanger for coolant cooling Ltsdpfx Aaoxndgzj Eoa Heat exchanger pump: 80 L/min 7 bar Low-pressure pump: 300 L/min 4 bar High-pressure pump: 55 L/min 40 bar Safety & Environmental Automatic CO₂ fire extinguishing system with optical/thermal detection Preparation for central exhaust system Shut-off flap for central oil mist extraction Control Options & NC Functions 16/16 freely programmable I/O interface Transmit / Tracyl function (milling cylindrical paths on OD and face) Dual transmit function for Y-axis transformation NC option: counter spindle / polygon turning with electronic shaft Process Monitoring Integrated ARTIS monitoring system based on torque, current, or power evaluation Up to 4 channels (max. 8 drives) monitoring 4 tools simultaneously at stations 1–3 Up to 4 channels (max. 8 drives) monitoring 4 tools simultaneously at stations 4–6

Condition: excellent (used), Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. Ltedjx Ddcuepfx Aa Eja 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe 3 Turrets 2 spindles Fanuc Control: 31i-Model B Ltedpfsxxm Hfex Aa Esa Axial Motorized Switches: 6 pcs Radial Motorized Switches: 13 pcs Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: On time: 37946 Hydraulic hours: 37,500 Production time: 26,500 With MBL Bar Feed

Condition: used, Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) Ltodpfxoxnrtco Aa Esa 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: good (used), Year of construction: 2006, INDEX MS52C CNC Multi-Spindle Ljdpfxet Rkzwo Aa Eota Mfd. 2006 Control: Siemens 840D 6 Spindles 52mm Capacity Equipped as pictured Under power Knoll System Chip Conveyor Riedel Chiller 3.6 meter (12ft) IEMCA SIR Bar Feed SIR MS52/F Type 38 XL Mfd. 2005

Year of construction: 2011, condition: ready for operation (used), A defective CNC 6-spindle lathe Index is available: Speed: 10000rpm, main spindle power: 8.7kW/15kW, max. bar diameter: 22mm, tool stations: 10, travel X/Z: 62mm/85mm, travel Y: +/-12mm, max. clamping diameter: 22mm, machine dimensions X/Y/Z: approx. 3350mm/1850mm/2900mm, weight: approx. 6000kg, control: Siemens 840C. Includes tool holders, Knoll coolant system, Iemca SIR MS 22 P bar loader, HandlingTech robot cell. One spindle must be refitted with new bearings and the synchron spindle must be replaced. Documentation available. An on-site inspection is possible. Ljdpfx Aasx E Ad Ao Esta

Condition: used, Year of construction: 2015, Technical details: number of spindles: 6 spindle passage: 22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on Ljdpfxoxc Idmo Aa Eeta ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. *

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX total power requirement 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, Ltsdpfx Aajvh Naqj Eoa coolant

Condition: excellent (used), Perfectly preserved six-spindle INDEX MS 25 automatic lathe with six transverse and six longitudinal tool guides. The price is negotiable depending on the selected additional equipment: clamping pods, tools, chip conveyor, etc. Ltjdpfx Asqhkukea Eja The machine is still in production. Viewing possible by arrangement.

Year of construction: 2002, condition: ready for operation (used), A CNC multi-spindle lathe Index overhauled in 2020 is available. Number of spindles: 6, max. bar capacity: 32mm, spindle speed: 6300rpm, weight: approx. 10800kg, control: Siemens Sinumerik. Bearing condition measurement 2024 HS1: 14.35, HS2: 15.45, HS3: 10.37, HS4: 11.16, HS5: 17.44, HS6: 7.54. The machine has undergone extensive repairs to the spindles, cooling system, bearings, hydraulic lines, etc. Documentation available. Documentation available. On-site inspection is possible. Lsdpfewr Dw Rox Aa Eota

Condition: good (used), Year of construction: 2014, Control FANUC 31i-B Main Spindle Bar Capacity 42mm Main Spindle Speed 7000rpm Main Spindle Motor 29/25kW Main Spindle C axis 0.0001 degree Sub Spindle Bar Capacity 42mm Sub Spindle Speed 7000rpm Sub Spindle Motor 19/16.5kW Sub Spindle C axis 0.0001 degree Sub Spindle Stroke 500mm Sub Spindle Rapid 60m/minute Turret 1 Stations 10 Milling Speed 6000rpm Milling Motor 4.2kW X Axis Stroke 70mm X Axis Rapid 30m/minute Z Axis Stroke 250mm Z Axis Rapid 60m/minute Y Axis Stroke 70mm Y Axis Rapid 15m/minute Turret 2 Stations 10 Milling Speed 6000rpm Milling Motor 4.2kW X Axis Stroke 70mm X Axis Rapid 30m/minute Z Axis Stroke 400mm Z Axis Rapid 60m/minute Y Axis Stroke 70mm Y Axis Rapid 15m/minute Ltedpfx Aaex H R Rto Eea Turret 3 Stations 10 Milling Speed 6000rpm Milling Motor 4.2kW X Axis Stroke 125mm X Axis Rapid 30m/minute Installation Footprint 7612 x 1530mm Weight 5500kg Electrics 57 kW, 68 kVA, 97 A, 400 V, 50/60 H Accessories Gantry work piece discharge unit, Parts Conveyor, Swarf Conveyor. High Pressure Coolant, Manuals, Tool Monitoring, UNIMAG Interface, Iemca Boss 552-HD Magazine Barfeed, Hainbuch Collet Chuck fiited to Main Spindle, 3 jaw chuck fitted to Sub Spindle

Year of construction: 2008, condition: ready for operation (used), Main Drive Number of axis 4 Spindle Speed 3000 RPM Spindle motor power 67 kW Movement X-Axis Movement 640 mm Z-Axis Movement 2000 mm Y-Axis Movement 210 mm B-Axis Max 360 º C-Axis Movement 360 º Tools Max weight 5 kg This 4-axis Index G 400 horizontal turning machine was manufactured in 2008. It features a maximum turning diameter of 630 mm, a length capacity of 2000 mm, and supports a workpiece weight up to 300 kg. Equipped with a high-speed milling spindle at 6000 rpm and a main spindle speed of 3000 rpm, it offers robust machining capabilities. Consider the opportunity to buy this Index G 400 horizontal turning machine. Contact us for more information. Application Types Turning Lodsx D D Ecepfx Aa Eeta

Condition: used, Single-spindle lathe INDEX B60 Ltsdjxt U N Rjpfx Aa Esa

Year of construction: 2001, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840C Ltjdex D Hgiopfx Aa Eoa Additional Equipment Equipment: Bar loader and several driven tools This Index G200C horizontal turning machine was manufactured in 2001. Ideal for precision turning operations, it offers robust performance and reliability. Consider the opportunity to buy this Index G200C horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, Single-spindle lathe INDEX B60 Ltedjxt U N Dspfx Aa Eja

Condition: used, Single-spindle lathe INDEX B60 Ltjdpfxjxt U Nwo Aa Eea

Condition: used, Single-spindle lathe INDEX B60 Lsdpfx Asxt U Nqoa Eota

Condition: used, Single-spindle lathe INDEX B60 Ledpfsxt U Nksx Aa Ejta

Condition: used, Single-spindle lathe INDEX B60 Ljdpfx Ajxt U Iysa Eeta

Condition: used, Single-spindle lathe INDEX B60 Lsdpoxt U Imsfx Aa Eeta

Condition: used, Single-spindle lathe INDEX B60 Ltedjxt U Igspfx Aa Eoa