Used Erika 60 for sale (20,564)

Condition: like new (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: P 710, control type: CNC control, oil tank capacity: 120 l, overall weight: 6,500 kg, power: 5.5 kW (7.48 HP), Machine is in as-new condition. The High Quality Press Brake (HQPB) represents the top model of the Placke range of press brakes. The entire manufacturing process, from hydraulic cylinders to control cabinet assembly, is performed in-house. By combining state-of-the-art technology with many years of expertise in forming technology, the HQPB series enables precision bending at the highest level. Even the standard configuration provides a fully functional press brake. This package of safety, reliability and efficiency, together with user-friendly operation, allows us to meet the highest demands and tolerances in the bending process. Machine Frame: - Base machine constructed from S 355 N steel - Side supports with 2 pressure pipes and an overhead oil tank, welded - Above-floor design - Coating (2-component structured lacquer), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relief annealed - Depth of stroke measurement, reading head guided by ball bearing rails - Separate Y1 and Y2 control, electronic monitoring of parallelism Hydraulic System: - Hydraulic proportional control valve with electronically monitored cylinder synchronization - Solid steel cylinders with inductively hardened piston rod - Low-noise internal gear pump Punch Clamping: - Upper tool holder system WILA, hydraulic clamping system, Type NSCL-II-HC, fully hardened, Maximum load: head bearing = 250 t/m, shoulder bearing = 300 t/m Lower Beam: - Narrow table incl. manual clamping strip, dimensions: 48 mm high, 70 mm wide - Reinforced lower beam. Mechanical crowning compensation is structurally unnecessary. - Single V-die holder (13x20) - Working height: 1050 mm (with 55 mm die height) Front Side of Machine: 2 aluminum support arms at the front, approx. 600 mm long, incl. 2 flip stops, measuring tape, and plastic wear strip. The support arms are adjustable via ball guides and height-adjustable from 55 mm to 100 mm die height using a slotted adjustment. The ball guide is milled into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge “2-axis control”: - X and R axes CNC-controlled - Z-axis manual Delem DA 66 Touch control panel on swivel arm. Safety devices in accordance with CE standard Technical Data and Working Range: Press force: 600 kN Working length: 1550 mm Distance between frames: 1200 mm Installation height: 400 mm Nsdpfx Agjyvzkiewocp Throat depth: 255 mm Ram stroke: 215 mm Ram Speeds: Rapid approach max. 280 mm/s Press speed max. 9.8 mm/s Return speed max. 170 mm/s Ram positioning accuracy: ± 0.01 mm Ram tilt: ± 10 mm Electronically limited to ± 5 mm Lower beam height above floor: 947 mm Motor power: 5.5 kW Main dimensions: Below-floor depth: 0 mm Pit depth for side frames: 0 mm Machine weight: approx. 6.5 t Tank capacity (hydraulic oil): 120 l (Specifications subject to change) Rear machine lighting: Work area illumination via LED light strip in the area between the side frames.

Condition: good (used), Year of construction: 2014, operating hours: 21,000 h, functionality: fully functional, DMG MORI DMU 60 Evo 5x simultaneous axis machining center (2014) Manufacturer: DMG Mori Type: DMU 60 Evo 5x simultaneous axes Year: 2014 Condition: good, used, new spindle in 2024 Operating hours: 37,063h Spindle hours: 21,313h Control: Heidenhain ITNC 530 Condition: used, ready for operation Travel x/y/z 600/500/500 mm Nsdpfoyubz Djx Agwjcp Rapid traverse 80m/min Speed 20-14,000 rpm Tool magazine 30 Tool holder SK40 NC rotary tables 600x500mm Coolant supply 40 bar with band filter system Measuring probe TS649 Documentation

Condition: used, Year of construction: 1979, pressure 60 t distance between columns 650 mm stroke 220 mm distance table/ram, max. stroke up, adjustment up 410 mm Nsdevuk Nmepfx Agwjcp table surface area 600 x 525 mm pressure of drawing cushion in table 5 t stroke of drawing cushion in table 80 mm table height over floor 900 mm side window 200 mm ram surface 560 x 490 mm dimensions (WxDxH) 1,9 x 1,3 x 2,7 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (Sick FGS 600), hydraulic drawing cushion in table, two-hand and foot operation No foundation pit necessary can be offered without or with putting into operation in given condition

Condition: new, Approx. 14 running meters , H: 500 cm , Shelf load: 4500 kg , Pallet racking , Heavy duty racking , High bay racking , Industrial racking , Shelving Immediately from stock Data : - Height : approx. 500 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 4500 kg shelf load - Stand in galvanized - Cross beams 270 x 15 x 5 cm, T45 - Cross beams in orange - New BLT PR50/101 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 500 cm x 110 cm, disassembled. - 30 x crossbar approx. 270 x 15 x 5 cm, T45. - 60 x safety pins. - Levels: Floor + 3 - 60 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2940,00 € net plus legally valid VAT. Njdjyuw Elopfx Agwjcp You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 650 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 650 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Crossbars in orange - New BLT / PR65 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 650 cm x 110 cm, disassembled. - 30 x crossbar approx. 270 x 14 x 5 cm, T30. - 60 x safety pins. - Levels: Floor + 3 Njdpfxoyuwx Sj Agwjcp - 60 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2400,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 550 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 550 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Galvanized uprights - Crossbars 270 x 14 x 5 cm, T30 - Crossbars in orange - New BLT / PR55 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 550 cm x 110 cm, disassembled. - 30 x crossbar approx. 270 x 14 x 5 cm, T30. - 60 x safety pins. - Levels: Floor + 3 - 60 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2220,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Nodpfjyuwxrox Agwecp Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, functionality: fully functional, The used STOW shelving system (Type: Stowshelf) is a high-quality solution for structured storage in workshops, warehouses, or industrial environments. With approximately 39 linear meters in length, 60 cm depth, and 3.0 m height, this racking system offers sturdy shelves (each 126.5 × 60 cm, load capacity up to 100 kg) across 7 storage levels. The uprights are galvanized and pre-assembled – ideal for quick and straightforward installation. The shelving unit is available directly from stock – perfect for anyone looking to purchase a robust and sustainable racking system second-hand. Note: The racking must be secured against tipping on site. The uprights can be shortened to a height of approximately 230 cm. Please note: The described racking is an example. The STOW shelving system is modular and can be configured in the desired length according to your requirements. PRODUCT DETAILS: Height: approx. 300 cm Depth: approx. 60 cm Length: approx. 3,900 cm Manufacturer: Stow Type: Stowshelf Shelves: approx. 126.5 × 60 cm, galvanized Load capacity: 100 kg per shelf Uprights: approx. 300 × 60 cm, galvanized, pre-assembled Storage levels: 7 tiers Version: Used STOW SCOPE OF DELIVERY: 31 x Uprights (approx. 300 × 60 cm), pre-assembled 210 x Shelves (approx. 126.5 × 60 cm) 840 x Shelf supports 8 x Cross braces Price: 2,590.00 € net 3,082.10 € gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: Nationwide delivery within Germany by our partner shipping company – freight costs depend on postal code. Professional assembly and disassembly by trained teams optionally available. Racking inspections in accordance with DIN EN 15635 performed by certified inspectors. Inspection of existing heavy-duty racking from other manufacturers is also possible. PLANNING & CONSULTATION: Our planning department will gladly provide you with a non-binding offer individually tailored to your requirements. Whether new installation, conversion, or extension – we provide professional advice for your racking configuration. SHOWROOM: Feel free to visit our showroom! On site you can get a comprehensive look at our pallet racking, warehouse shelving, and other solutions. Many systems are assembled and ready to experience. Our specialists are available for questions and personal advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website – you’ll find a quick overview of many offers and variations of our products! Ncodpfx Agjyuv Sqowsp INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. You’ll find our phone number on our company page. We are available by phone Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number, and we’ll get back to you as soon as possible.

Condition: used, functionality: fully functional, The used STOW shelf rack (Type: Stowshelf) is a high-quality solution for organized storage in workshops, warehouses, or industrial settings. Measuring approximately 3.94 meters in length, 60 cm in depth, and 3.0 m in height, this racking system features sturdy galvanized steel shelves (each 126.5 × 60 cm, load capacity up to 100 kg) across 7 storage levels. The frames are galvanized and pre-assembled – ideal for swift and uncomplicated installation. The shelving unit is available directly from stock – perfect for anyone looking to purchase a robust and sustainable used racking system. Note: The racks must be secured against tipping on-site by the customer. The rack uprights can be shortened to a height of approx. 230 cm. Please note: The described rack is a sample configuration. The STOW shelving system is modular and can be custom-assembled to your required length. PRODUCT DETAILS: Height: approx. 300 cm Depth: approx. 60 cm Length: approx. 394 cm Manufacturer: Stow Type: Stowshelf Shelves: approx. 126.5 × 60 cm, galvanized Load capacity: 100 kg per shelf Frames: approx. 300 × 60 cm, galvanized, pre-assembled Storage levels: 7 Condition: Used STOW goods SCOPE OF DELIVERY: 04 x frames (approx. 300 × 60 cm), pre-assembled 21 x shelves (approx. 126.5 × 60 cm) 84 x shelf supports 01 x cross brace Price: €300.00 net €357.00 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: Nationwide delivery in Germany by our partner forwarding company – freight costs depend on postal code Professional assembly and disassembly by trained teams available as an option Racking inspections pursuant to DIN EN 15635 by certified inspectors Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department is happy to provide you with a no-obligation offer – tailored to your requirements. Whether new installation, modification, or extension – we offer expert advice for configuring your racking solutions. SHOWROOM: Feel free to visit us in our showroom! On-site, you can get a comprehensive impression of our pallet racks, storage racks, and other solutions. Many systems are set up and can be experienced directly. Ncodpfx Aeyuv Edsgwop Our expert consultants are available to answer any questions and provide tailored advice – we look forward to your visit! Not found what you are looking for yet? Visit our website – here you will find a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone call. You can find our phone number on our company page. We are available by phone from Monday to Friday, 08:00 am to 04:00 pm. Alternatively, you can send us a message with your name and phone number and we will get back to you as soon as possible.

Condition: used, machine/vehicle number: WDB9634031L877401, mileage: 950,456 km, power: 331 kW (450.03 HP), first registration: 07/2014, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of beds: 2, total length: 6,150 mm, total width: 2,550 mm, Year of construction: 2014, Equipment: electric window regulation, spoiler, = Additional options and accessories = Ncjdpfxsytbxao Agwep - OptionCruise - Radio - Spoilers = More information = Cab: GigaSpace Front axle: Steering Rear axle: Double wheels Empty weight: 8.044 kg Carrying capacity: 10.956 kg GVW: 19.000 kg

Condition: used, Year of construction: 2020, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). KEMROC EXR 60 HD surface planer / asphalt planer / milling attachment, incl. MS10 adapter plate / Year of manufacture: 2020 / in stock & immediately available Price: €24,890.00 net / €29,619.10 gross Milling width: 600 mm Adjustable milling depth: 0 – 190 mm Recommended speed: 70 – 95 rpm Recommended oil flow at 100 bar: 150 – 200 l/min Min. oil flow: 150 l/min Max. oil flow: 210 l/min Max. hydraulic operating pressure: 380 bar Torque at 350 bar: 9,300 Nm Cutting force at 350 bar: 28 kN Operating weight: 1,400 kg Number of picks: 69 Recommended excavator weight: 15 – 23 t Rated power: 80 kW Equipment: - incl. MS10 adapter plate - incl. spare picks - incl. hydraulic hoses as shown in photos - incl. transport frame We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse holds a large selection of various attachments, all ready for immediate delivery! Mr. Herden (phone ...) will be pleased to assist you. On request, we are also happy to provide attractive financing options. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick Ncedpfeyxaf Rox Agwep - Weber MT - Holp - DMS - Seppi M. - Magni telehandlers - JCB construction equipment - Mercedes-Benz - Iveco With over 800 used commercial vehicles in stock, we are also one of Germany’s largest commercial vehicle dealers. Subject to errors and prior sale! Internal no.: 100439 = More information = Please contact Marius Herden for further information.

Condition: used, mileage: 10,560 km, gearing type: other, fuel type: electric, color: red, overall weight: 1,330 kg, empty load weight: 700 kg, maximum load weight: 150 kg, number of seats: 1, first registration: 11/2015, emission class: none, suspension: other, Year of construction: 2015, operating hours: 10,560 h, driver cabin: other, fuel: electricity, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge Ncsdpfxjyw Akas Agwsp A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 400 V, warranty duration: 12 months, total height: 1,140 mm, total length: 660 mm, total width: 1,040 mm, type of input current: three-phase, input current: 32 A, control voltage: 24 V, DGUV certified until: 04/2027, Deep Fryer F 60 Plus Floor Model NEW Model: F 60 Plus Floor Model Stainless steel construction with rotating basket LED timer Lifting mechanism with 5 stainless steel tilting pans / proofing trays Temperature controller & safety thermostat Steam cover, drip tray Capacity approx. 600/480 pcs/hour Stainless steel build Robust engineering Connection: 400V, 32A-CEE plug Ncjdpsxp Ukaofx Agwsp Brand new equipment with warranty + spare parts service Quality from a specialist supplier! Benefit from over 35 years of experience! We have many more deep fryers in stock!

Condition: good (used), conveyor belt width: 650 mm, input voltage: 400 V, input frequency: 50 Hz, electrical fuse: 16 A, opening width: 45 mm, working width: 650 mm, type of input current: three-phase, Dough Sheeter Fritsch Rollfix 60/650 E Computer control / programmable control for all types of dough for sheeting and laminating Nedpjytz H Rsfx Agwecp with reel for winding Stainless steel construction electric flour duster Machine is mobile Connection 400V, 16A-CEE plug Used machine Visit our large bakery machines warehouse!

Condition: used, Year of construction: 1996, x-travel 600 mm y-travel 560 mm z-travel 560 mm Control Siemens size of pallet 400x500 mm Table load 300 kg feed 40.000 m/min spindle speed: 20-8000 U/min spindle taper ISO 40 Spindle capacity 13/20 KW Torque 191 Nm 4-axis horizontal machining center. Dual pallet changer. B-axis table indexing 0.001°. B-axis rapid traverse 40 rpm. KNOLL coolant system with filter and chip conveyor. 40 bar coolant supply via collar. Good condition. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Nodpsyutu Asfx Agwjcp About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1995, sheet width 6000 mm plate thickness 6 mm Ncsdpfxsyutt Eo Agwop distance between columns 610 mm Control Elgo 87 P2 total power requirement 15 kW weight of the machine ca. 22 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 140 h, load capacity: 6,000 kg, lifting height: 4,770 mm, free lift: 1,505 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,710 mm, battery capacity: 1,240 Ah, remaining battery capacity: 96 %, battery voltage: 80 V, battery weight: 2,785 kg, fork carriage width: 1,600 mm, fork length: 1,500 mm, tire condition: 95 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), drive type: Elektro, Electric 4-wheel forklift Load center: 600 mm ISO Class: ISO Class 4 = 5,000 - 10,000 kg Ncsdpfeyiv Diex Agwop Mast type: Triplex Condition: Refurbished without warranty Technical condition: Very good Front tires type: Superelastic Front tires size: Smooth tires. High load capacity. Slim width. Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: Smooth tires. High load capacity. Slim width. Rear tires condition: 80 - 100% Battery voltage: 80V Battery capacity: 1240Ah Battery manufacturer: 96% remaining capacity Battery type: PzS Battery year: 2019 Battery condition: 80 - 100% Description: Overhauled, maintained and inspected in accordance with FEM 4.004 (UVV). Completely repaired, serviced, and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cabin, safety light, Mini lever with armrest

Condition: good (used), Year of construction: 1989, machine/vehicle number: NE 60 053, Brand: Hans Weber Type: NE 60 Serial No.: NE 60 053 Nedpfx Ajylv A Regwscp Year of manufacture: 1989

Condition: used, Year of construction: 2014, operating hours: 1,869 h, load capacity: 3,000 kg, lifting height: 6,105 mm, fuel type: electric, construction height: 2,470 mm, Equipment: cabin, head guard, * Load capacity: 3,000 kg * Lifting height: 6,105 mm * Overall height: 2,470 mm * Own weight: 5,969 kg Ncodpfx Agjtruw Sewep * Free lift: 2,145 mm * Battery voltage: 80 V * Drive power: 15 kW * Unladen weight: 4,013 kg ----- Internal vehicle number: 9592 ---- Subject to errors and prior sale.

Year of construction: 2005, condition: used, Top-bottom profiling group at input Nsdpfx Aoynf Izogwjcp 5 Sanding Groups 1 horizontal finishing brush group Electronic speed controller for sanding Ideal manufacturer of stairs, frames, various moldings, ... 380 V Weight +/- 3,000 kg Control cabinet Machine documents

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table width: 660 mm, table length: 1,670 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This HURCO VMX 60 Vertical Machining center was manufactured in the year 2008. It is equipped with a MAX control unit and has 3 axis. The machine has a spindle speed of 10000 rpm. Ncodpfx Agjyi Ekxswjp Machine Benefits Qualitative Machine Benefits • Good condition Technical Machine Benefits • Tool turret 24 positions • Equipment various tools • Accessories chip evacuator

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,186 h, controller manufacturer: HEIDENHAIN, controller model: ITNC530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DMG MORI DMU 60 MonoBlock was manufactured in 2010. It features a 60-tool automatic tool changer, a maximum spindle speed of 12,000 RPM, and SK40 tool holder. Additional features include a Heidenhain TS649 probe, 3D quickSET, and 40 bar through-spindle coolant. Ideal for complex and precise machining tasks. Located in Iceland, contact us for more information about this machine. Ncjdpox D Iirefx Agwjp • Through-spindle coolant: 40 bar • Spray gun • Electronic handwheel • BA4 mode Additional equipment • Heidenhain TS649 touch probe • 3D quickSET (calibration/checking system) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) Nodpfx Agsx Imqlewjcp • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: HEIDENHAIN, controller model: TNC 426/430M, This 4-axis DECKEL MAHO DMU 60 T was manufactured in 2001. It features a Heidenhain TNC 426/430M control, a working area of 630x530x630 mm, and a spindle speed of 12,000 rpm. The swivel B axis can rotate 180 degrees, and it includes two tool magazines with 12 positions each. Consider the opportunity to buy this DECKEL MAHO DMU 60 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Milling time: 29633 hours/ machine on time: 79606 hours • Swivel b axis: 180 degrees • Two tool magazines with 12 positions each / laser tool measurement for length and diameter "blum" • Spindle speed: 12000 rpm Nedpfoyaqdxjx Agwjcp • Working area dimensions: 630x530x630 mm

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis Hurco VMX 60 was manufactured in 2008. A vertical machining center featuring a MAX Control system, it offers X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 610 mm. It includes a spindle speed of 10,000 rpm, a BT40 spindle taper, and a 24-position tool turret. Consider the opportunity to buy this Hurco VMX 60 vertical machining center. Contact us for more information about this machine. • Table size: 1,670 x 660 mm • Tool turret: 24 positions Additional equipment • Various tools Nsdpfx Agoygmtvowjcp • Chip evacuator Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 505 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, overall weight: 3,750 kg, spindle speed (max.): 36,000 rpm, number of axes: 5, This 5s FEHLMANN PICOMAX 60-HSC vertical machining centre was manufactured in 2008. It features a table size of 920x380 mm and offers impressive spindle speeds of up to 36,000 rpm. With a robust weight of 3750 kg, this machine is designed for precision and durability. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 60-HSC machine we have for sale. Contact us for further details. • Table size: 920x380 mm • Spindle replaced in 2015 Ncedpfxjyizpde Agwop Technical Specification Taper Size HSK 50